2024 and 2023 CVO Street Glide Handlebar Install | KST Kustoms
Vložit
- čas přidán 27. 08. 2024
- Detailed tutorial showing the installation of 12" Patriot Baggers on a 2024 Harley Davidson Street Glide. The same process applies to the 2023 CVO Street Glide as well. KST Kustoms is the leader in Quality, American Made Handlebars and Customer Support
Wow, I was just wondering today how to change bars on these new bikes.
What a phenomenal step by step instructional video.
Harley put a lot of engineering to these models to make the bar change so much easier.
You've got a new subscriber!!
Well done sir.
I cannot give this enough likes
Thank you sir
Dude that is amazing video I am somewhat a mechanic but not on motorcycles I had it the whole thing done handlebars installed everything in 2 hours with your video help you are simply just totally amazing thank you for everything it saved me $850 but Harley was going to charge
You can actually adjust the handlebar angle after complete assembly by simply removing USB drawer. It will give you perfect access to adjustment bolts
Good to know! Any tricks to removing the USB drawer?
@@djs022867 no tricks, just give it a little tug.
@djs022867 honestly, it's kinda flimsy. Just keep pulling it firmly past the stop and it should pop out.
Excellent Video!
One thing I would like to add is that the handlebars can be adjusted with the fairing in place by removing the cell phone tray, it just slides out. With the tray removed you have access to the riser bolts.
Thanks for the insight. We did figure this out after the fact as well 😂. I need to post a separate video showing that
@kstkustoms1324 please do!
Thank you sir just put the bison on my 24 SG as always great job explaining step by step. Appreciate your customer service second to none.
you guys are the best!!! see you in Daytona
Great job, thanks for the install video
Just put the 10” Patriots on my 24 SG last night. It can be done without removing the inner fairing completely with a little bit of finessing but definitely more of a pain.
Did you use the stock clutch cable. If so how did rebending it go?
How much taller are the 10” compared to the stock bars?
Would you recommend replacing the handlebar riser bushings, ideally with polyurethane bushings when you are changing the bars?
Phenomenal tutorial. Had a customer drop off his 24 CVO street glide today wanting a set of bars installed. Helped me out a ton.
Can you still use the stock mirrors with these 12" bars, like can you see them? Looks like it. I had 12" bars on a 23 street glide and with that older design you couldn't see the mirrors at all, they were perfectly blocked.
They will still be blocked a little bit but you can see more of these than the 14-23 models
Great video. I have purchased the 12” Bison’s and I’m so looking forward to getting them swapped. Harley says they charge 7 hours labor and wants $900. I am in Indianapolis, any suggestions on somewhere I can get them installed cheaper without voiding warranty?
What did u end up doing??
For future handlebar adjustments, example repositioning the handlebars after new seat install, does the entire fairing have to be removed or just the plastic fork lock cover? Thanks.
Call me. 678-378-5036
We figured out a way to do it without tearing the whole thing back apart
This is a great video. I was able to complete the job in about 4 hours going real slow. One problem those is that the the clutch and brake lever mounts have about a 1/8" or 1/16" inch gap. The controls arent moving but there is a gap. Any idea ??
Fantastic instructional video.
The only comment is the lighting. I think with good video lighting the process would stand out even more.
Have FLHXSE CVO 2024
Q : how much time does it take to perform the full process ?
Q : Any idea how much time it will take to re-adjust the handlebar once fully installed (including the fairing) ?
Q : Are there any differences with the installation of 12" Bison Bagger or 12" Patriot Bagger ?
Thanks for your reply - Greetings from Belgium - Europe
How tall are you? Going to get these but can’t decide on 12” or 14”. Great vid, thx. Just subscribed!
@@dfunklegendfontdawg5023 6’1”
High Occtane H.D. is putting the patriot bagger 12" on m 2024 CVO StreetGlide having hard time with the brake line telling me need to put 4" extended brake line for a safer & better looking Job. i have been waiting since February
Hey man. I hate to hear that they are trying to sell you on that. We have probably done more of these than anyone in the country, ive never changed the brake line. Even up to 14" with stock brake line
How much longer of an upper clutch line was used from Magnum? What is the size of stock and the size of the magnum upper?
So you only need a longer clutch cable for 12 inch everything else will work ok ?
As stated, that is Correct.
You have to purchase new lids from Harley Davidson? When will the cutting kit be available?
?
I find it funny how they state you don’t need to change cables will the bars yet on the install video they use a different clutch cable upper. How about a video showing you bending that hard casing clutch line…
Point it out if I’m wrong but where is it stated that you don’t have to change the clutch cable on this bike? Pretty cut and dry on bending the stock one. Just form it/manipulate it until it fits the new geometry. You will still need the clutch extension if that’s the route you choose, which is stated. It’s just a lot cleaner and the same money installing a flexible upper
Do the 14 inch bars have the same process? Is the clutch cable the only one that needs to be changed?
Yes
I just got a 24 SG and looking to change the bars. Are you going to be at the Myrtle Beach rally next month?
Yes sir. We would love to do this for you. Call 678-378-5036 and I’ll write up an appointment
Whats the length of upper clutch cable required to run a set of 14” patriot baggers? I bought a set from your website.
43” I believe
In the 2024 street glide video. How tall were those bars that you used?
12”
Did you just use the 4” over clutch extension?
I replace the upper clutch cable. Watch the video I go over it in detail
Do you sell the extended clutch cable
Yeah it’s bundled with the handlebar. Go to the product page for the handlebar style you are looking for and you can select yes or no on the clutch cable
Can you sell just the cable? My friend already bought Fat Bagger 12” bars but didnt know about having to replace the clutch cable
@@hdrider6303 sure. $150. Call the office at 770-537-9133.
Ok.. thanks!
Whos clutch cable did you use?
We have them. We buy them from magnum shielding
Huh, they dont have them on their website yet. Do you have a link to them?
@@williamjurgenson3502 they are making them custom for us right now. They had hoped to have them available for mass production in 4 weeks. I have a lot of inventory built up in house. I have them bundled with the street glide bars for the 23cvo/24 street glide on the website
Thanks for the info
I’m so glad I found this video. Thank y’all so much for posting! So the wiring pulled from the stock bars is long enough to re-use in 14” bars?