How To Install 12 Inch Handlebars 2022 Street Glide Special
Vložit
- čas přidán 25. 07. 2024
- This video takes you through the process of installing 12" handlebars on a 2022 Harley Davidson Street Glide Special. The handlebar wiring portion has been shortened to keep the video a reasonable length. For a detailed video on how to prep and handlebars, click the following link:
How to Prep and Wire Motorcycle Handlebars: • Prepping And Wiring Mo...
Adjusting Handlebars On A Harley Davidson Touring Motorcycle: • Adjusting Handlebars O...
For an article on this install please visit: rideitwrenchit.com/installing...
Website: rideitwrenchit.com/
Facebook: / rideitwrenchit
Instagram: / rideitwrenchit
Below is a list of parts used in this video with links:
Paul Yaffe's Bagger Nation MBB125-12: amzn.to/39zGrMG
Avon Grips: amzn.to/3zJPZjb
CAN Circuit Handlebar Wiring Extension Harness 12": amzn.to/3xrxJrX
Fatbaggers Clutch Cable Extension: fatbaggers.com/ez-install-4-c...
Mason Line: amzn.to/3xUg5OM
For more maintenance tips, riding stories, or donations to help support the making of these videos, please visit my website at: www.rideitwrenchit.com
**Always follow the instructions found in the service manual for your particular bike. Manuals can be purchased at the dealership or online**
The information in this video is for educational purposes only. Ride It Wrench It assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use the information in this video at your own risk. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the user's sole responsibility and not Ride It Wrench It. - Auta a dopravní prostředky
Hats off to anyone doing this themselves versus paying a professional to do it.
By far, one of the best DIY videos I have seen to do handlebars. You've convinced me to do my own. Thank you. Keep 'em coming.
The best 12" Street Glide Ape Hanger install demo on You Tube!
The best bar install video on CZcams…thanks!!
I did my bars on my 2012 by watching your old video. Great stuff, love the new bike!! Keep up the great work sir. Ride safe!!
I searched a lot of videos and this was by far the best. My bars were Arlen Ness and the bike was an Ultra Limited but the process was the same for the most part. This helped tremendously. Thx for helping the rest of us!
Great video thanks... good to see you back in action
Good to see you back!
Subscribed because of this video. Just installed the dominator 12” meat hooks on my 21 FLHXS. Thank you for taking the time to make this. Helped me tremendously.
I’m in the process of installing the same ones on my 19 SGS.
Awesome and very detailed video. I feel more comfortable doing my 12inch bars myself . Thank you for passing your knowledge forward. Greatly appreciated 🙏
Like i said last week great to have you back awesome video. i have a 2021 street glide 41,000 miles also do my maintenance but i always learn when i watch your videos.
Awesome, Thank You!
Best video i saw for installing new handlebars! Thank you so much for sharing it with us!
This was invaluable information. I took on the project of installing 12" bars on my 22 Ultra Limited. This video was step by step and saved me a ton of time. There are some wiring differences with the Ultra, and heated grips. Some plugs are the same so take pictures before you disconnect. Going just 2" taller than stock, I was able to reroute the clutch and brake lines and did not need the clutch cable extension. Over 2" would need either the clutch extension, or a longer cable and a longer brake line. Thanks for putting this video together, it was a great help.
Thanks for watching!
Great video as always
i can't wait to do my handlebars great video.
Awesome video! Keep em coming!
Thank you very much for this video. Getting ready to tackle this and will be using this video as my reference.
Da hast du dir viel Mühe mit dem Video gegeben, alles gut gezeigt und erklärt. Danke.. 👍
Love the video have the same bike little tip. Remove the clutch cable from the clip inside the fairing and run it to the left said. No need for the extension. And when reinstalling tighten the 2 top bolts on the bracket for the handle bar clamps snug the bottom put the fairing back together electrical and all and you can set your bars with the fairing back on and using a ball end Allen key you can tighten the bottom bolts to spec and lock them where you want them.
Thanks for the tip. So you say you don’t need a clutch extension, but do you need the wire harness extensions?
@@csmaldino77you don’t need anything if you install the 12” handlebar
So can I do a bar adjustment by just removing the switch panel or do I need to split the batwing? Always left the top tight and just did the bottom to move them in the past
This is one of the best instructional videos I have seen, thank you much!
Very well done video . Thank you for the time to create de video 👊🙏
Nice video. Very detail oriented!
Great vid, will be using this for when i do my 2022 ultra. But looking at maybe 14
This is the best video thank you now I can do my bike thank you very much
Great video! Such a wonderful job you did; so very much lots of thanks for doing this. So easy to follow.
Glad it was helpful!
Very informative and precise. I'm very confident I can do this on my sons street glide. Thanks.
Glad it was helpful!
I would like to say great video, I used this video to put bars on my 2021 flhxs. Worked like a charm. the hardest part was the fishing of the wires through the bars. i used the lube that you use for Running wires through conduit for your house instead of grease. worked great. instead of using the grips i opted for heated grips, all working now and i love it. thanks for the great video!
Great to hear!
Gonna do my 12” bars tomorrow on my 22 SG ST. Thanks for this video.
Just did a CZcams search and this was 1st to come up, watched and saved... bought the pre wired 12" meathooks for my 21 flhxs now to take some time to do this. GREAT VIDEO/CONTENT thank you for taking the time to make this, looking forward to more stuff you put out!...👍👍
How did it go? I got the 14" bars and am going to start to change them out today.
@@AdventuresWithWampa I took my time and it was a booger... but I did it without getting bent out of shape... 2 days off and on working on it and that was from start to finish not bad for a darn owner operator truck driver... lol
Hello , will the original wires work or must I extend them ?
Thanks.
I saw I subscribed. Between you and your assistant I enjoyed this very much.
Awesome, thank you!
Great Video, thx from Germany 👍🏻💪🏻
Very good detailed install 👍
Super comprehensive vid! Thanks for sharing!
Glad it was helpful!
Good video, good audio, good instructions. 👍
You made it look really easy. Good job showing the good views. Continue to teach us first time hardly owner.
Thanks, will do!
Awesome we'll done video. Thanks!
Very well done video, nice job, thanks!
Thank you very much!
Thanks bud, followed you every step of the way to put my 12s on my streetglide.
Thought it was gonna be so much more difficult.
Appreciate it
No problem 👍
About how long did it take you?
Subscribed, excellent video, very informative I will be doing mine soon and found this to be extremely helpful. Thank you.
Awesome, thank you!
Great video!
Fantastic !! Great job truely appreciate you!!
Thank you kindly!
Very well done! Thank you.
Glad you liked it!
Wow, Sir, you are a beast. I am definitely letting someone doing that. I got the parts here but after seeing you doing that, there is no way I can replicate that. Hats off to you. Thank you so very much.
Great video. One tip grease the wires on the switches and throttle by wire with vasoline to help them slide through the handlebars.
Definitely going to watch this video as I do my bars.. Only thing is I'm buying pre-wired bars save some time and a headache
Same bars I put on my street glides - they're really really nice bars. Thanks for the video - might have to do them myself next time. :)
Nice Job, Thank You.
good Job well done video
Very well done!
Thank you very much!
great to see you back wrenching again... everybody needs a Margaret 😂
Absolutely
great video thk you
Great video! How much height did you gain at the grips from stock to the 12” Paul Yaffe’s? I sat on my bike, closed my eyes, and held out my arms to a comfortable position. My hands were 6” above my stock setup, 2022 FLHT. I tried to guess with your video and it looks to be about what I need. Thanks!
Sir I must say you made that look like butter
Awesome video.
I had more trouble getting the left control off the handle bars.
I could not get the top button off the switch housing.
Actually a relatively easy job
I think you’re the only channel I came across that showed how to extend the cable when changing the bars
I really try to be thorough. It can make the videos long though.
Best vid out
Thanks!
I have been using your video to put 12 bars on a Tri Glide. Basically the same.
Great job , i think 12 inch look great for Street Glide
Excellent video sir! '22 Street Glide Special here as well. Also in Utah (Eagle Mountain to boot). 😊❓Question: The one part of the video you didn't show is when you remount the fairing/console over both the clutch line and brake line...I'm having a hell of a time determining the positioning of where the cables should be (and I've gone back and researched/watched the video several times. Since I have 12's now I had to remove this plastic sheathe that was there.
Any advice and/or picture of how you nestled the brake line/clutch line right under the stereo/key fob?
Thanks soo much sir!
Man this is a great vid, getting ready to put the same bars on my 22 Tri Glide, will be interesting to see the wiring/"under the hood" differences if any?
Thank you.
Excellent video, thanks for sharing! Question: I had a Harley dealer install 12" bars (Factory 47) on a 2021 SGS (I bought it out of state). They said they had to run a new clutch cable (full length). The cable they installed was too long and is coiled up in the fairing and sticks - found out when I got home. I want to replace the full length clutch cable with a single good quality cable. What is the new length I should buy? I looked and found inconsistent data on stock length. I measured with a string, best I could and found 74-76" to be the new length, but that is much longer than what Magnum says is stock +4. Magnum say it should be 70". I have a 70" cable and it looks too short when holding it up. I would like to only buy 1 cable if possible. Thanks in advance.
Where did you get the clutch extender? Great video, very good explaining and direct. It was helpful taking your time also. I’m going to try doing it myself now.
Amazing tutorial- thank you for taking the time to share this. How do you keep all the bolts organized when removing everything to be sure the correct bolts go back as needed. That’s what I would mess up. Thanks again.
I just throw them all in a bowl
Excellent video. Just one question how come you didn't use the torque wrench on the perch clamp and switch housings etc?
Yea, I didn't show putting a torque wrench on every bolt.
Thanks for the really great video! Considering the 10" Paul Yaffe's on my 2017 street glide special. Would I need to get any wire or cable extenders?
No extensions are necessary for 10"
Do you have to take out the 50 amp fuse first to disable the security system? Just wondering. Great video though...keep up the good work.
nice job! I’m installing KST Patriot 12” bars. They are 1 1/2 “ thick and I’m having a problem fitting the fairing over them without grinding the lower part of the inner fairing. Now it looks like the ignition cover needs trimming too. Maybe I bought the wrong bars! If you could please share with me your thoughts!
Those 1 1/2" are going to be an issue with the fairing and ignition cover. The only thought I have is make sure the clutch and brake lines are secured to the bottom of the bars where they enter into the fairing area. There is a gap under the bars where the inner fairing and ignition cover come together that works well for routing those lines. This will create quite a bit more space around the rest of the handlebar to possibly accommodate the larger diameter without having to cut.
Question for you, when I remove the outer fairing and then remove all the bolts for the inner fairing can I lift and tilt the inner fairing and rest it forward without disconnecting any of the electrical plugs? or would I need to disconnect all the electrical connectors to tilt it ?
In the Twist Grip sensor harness, what is the two wire cable. Black/white wire assembly.
Just came across your page some great videos, on the 2015 Street Glide you put 10" apes on without additional cabling etc, would it work for 12" bars on a 2014 Street Glide cable wise, any help appreciated.
Thanks for posting this video. After one-year, do you wish you had replaced the riser bushings? I am about to install 12” mini-apes on my ‘23 SGS and was told the stock riser bushings will not last long due to the increased wear/leverage that taller bars will create.
I'm assuming this is the same install on a 2022 Electra glide standard. Will I need brake extension for 14s? Great video
Yes you will need to extend the brake line
This video has helped me to much but i cant figure out what to do with that rubber bar gripper, sorry dont know what to call it. its was on the original bars near the clamp. Do i just cut this off...I cant slide mine low enough to still use.
I finally cut it off carefully with a utility knife. It caused issues with getting the fairing to seat properly because of the larger diameter of the handlebars. You can then zip tie the clutch line in place to the riser bolt as was done at the factory.
Would this be basically the same for a 2010 CVO ultra classic?
Do you need brake and clutch cable extension for 12in hammerheads on a 2021 road glide special ? Or can I use the stock cables ?
Do you recommend bushings for the newer bikes?
Just finished swaping handlebars on my 2023 street glide, everything works lights,horn,ignition but start button is not,bike won't start. Any suggestions?
Sir you just saved me $1300.00 Thank you. Stealership quoted me 8hrs shop time to do this.
I love hearing success stories like yours! When someone says they like your bars and asks who did it you can proudly say, "I did"!
Couple things….great video. But never use an impact with Torx fasteners. You’ll learn after you do enough of them. Also, use a spray bottle with Dawn water mixed on the wire harnesses. A lot easier pulling/pushing through the bars.
Hi if I a, only fitting 10” bars, do I still need a clutch cable extension, and if so where do I purchase one. I live in Australia, thanks
Good job. I’d add, the menu button doesn’t pop up. Put a little tension on it, then pull/slide it towards the end of the bar. I can see a lot of buttons becoming useless just pulling up.
Do you have to extend the clutch line on 2017 street glide special with hydraulic clutch? Thanks for the awesome video!!!
Some people will tell you to cut the zip ties and the stock line will be ok. It can be done without changing it out but its awful tight. I had 10s on my 2015 and did not change the hydraulic clutch line and it was fine, barely. I would recommend changing the hydraulic clutch line. It's an easy swap and bleed.
@@RideitWrenchit thank you for the info!!!
Looks great!! What kind of grips are those? Where in TX are you located?
Avon Grips, DFW area
I noticed you didnt replace the bushings while in there. Any plans to swap them out?
By the way, your handlebar videos are the best! Thank you!
Not this time. I explain the reason in this video: czcams.com/video/foCKS3mQFOA/video.html
Great video as usual! Your last bike you install the 10 inch, your new by your installing 12, I bought 10 inch twin peaks for my bike and love them and followed your video for the installation you made it a breeze! Just curious to know which ones do you like better 12 or 10
Overall comfort I like the 12" more. I like that the fairing still blocked my hands with the 10" though.
I noticed you did remove the ignition switch. Is it not in the way of anything?
Excellent video. How many labor hrs does this take to do?
About 4 hours
Awesome video! Are those 12” dominator meat hooks?
12" Paul Yaffe
Do I need to disable the security? Or disconnect the battery before disconnecting any wires? Thanks
It's probably a good idea to pull the main fuse. I didn't and had no issues. All of the work is done after separating wire junctions that use quick disconnects.
From stock to the 12" Yaffes...Did you have to extend the Fly by Wire TPS? Tks.
No
You dont have to do the clutch extension do you?
Avez-vous du rallonger les câbles ?
I'm in the process of adding Tallboy bars to my 22 SGS. So far no real issues, except that clutch cable is very stiff. I assume you ended up removing that rubber shoe that wrapped around the handle bars? Did you have do any extra bending/reforming of the clutch cable?
I did remove the rubber shoe as well. No issues with bending or reforming cable because I extended it.
So I’m going to get 10 inch Paul yaffe monkey bars on my 23 ultra limited would you suggest getting the pre wired? And will I have to extend clutch and brake cable do you think? Thank you
This will answer your questions- rideitwrenchit.com/installing-12-paul-yaffe-handlebars-on-a-harley-davidson-2022-street-glide-special/
‘M going to do the same Yaffe 12” bars on my 22’ SGS. How long did it take to install the handlebar upgrade? My dealer is telling 6hrs, I’ve been told it should take 4hrs max Thanks!
It took a lot longer because of recording the process and recording in detail the prepping and wiring video. If it wasn't for creating the content I could do it in about 3-4 hours.
Thanks! I’m hooked, great video content
Thank You!
I did 12" KST bars on my 2021 UL (Street Glide) & no extensions were needed. The Clutch cable is a bit tight but not enough to pay for extenders.
Did you run the wire differently then stock? I’ve tried everything and I had to order the fat baggers extension.
Me too. Used KST 12 inch no extensions.
@@eddiesextoniii2845 Sorry for delay. You just cut the tie downs under the fairing and move them around.
Harley offers a clutch cable for touring models with sidecar. It’s +4” and typically half the price of the regular one. At least it was on my 2008. They won’t tell you that though.
👌
I have la chopper's twin peaks 1.5 12 inch
Are u able to still see in your mirrors with the 12" bars?
No