Porter Cable Benchtop Jointer Review
Vložit
- čas přidán 26. 08. 2017
- PC160JT Bench Jointer from Porter cable. Quick Review.
Like these videos? Support me on Patreon: / oneminuteworkbench
SUBSCRIBE: goo.gl/Bzbjk7
HOW TO ADJUST THE FENCE: • Jointer Fence Adjustment
MORE COOL STUFF:
www.oneminuteworkbench.com - Jak na to + styl
Straight to the point, covered pros & cons, clear and easy to understand. Nicely done.
Ditto that.
Speaking of straight, him and the Modern Builds guy should hook up! he'd be the top ofc
As of today (8/18/23) Menards has these for $99 after rebate.
This makes me love my old Delta 4 inch even more. It's cast iron and has a fantastic and fun fence move and pivot wrench that moves from one nut to another inner nut. The whole fence is mounted on the far right and still has no deflection at the other end.
They don't make 'em like the used to!
Thank you for this very nice review. As an aspiring woodworker, I have limited space and budget to setup the shop and it looks like this jointer will suit my need. Your review convinced me to get it. Thank you!
I'm glad you found the review helpful. It's still going strong, and I can't say enough good things about it. I'm not affiliated with Porter Cable in any way, so that's my real unbiased review! Good luck!
I bought this today for $100. Well see how it does
Great presentation of the Porter Cable jointer. Will buy this on your recommendation.
Awesome - I think it's a great buy (and I am NOT sponsored by Porter Cable). That said, as some others have pointed out in the comments, you could probably getting a larger more capable jointer off craigslist for the same price. That's something I considered, but when it came down to it, I liked the fact that I could return this one if it turned out to be a lemon (warped bed, warped fence, etc.). It's pretty tough trying to return something you buy off of craigslist.
I purchased one for 94 USD a few months ago on a super discount special, sits new in the box even now, couldn't resist at that price. I only hope the variable speed doesn't go to crap when I use it. It looks just like the POS craftsman model.
Thanks for the video, very helpful. Did you mount your jointer to a bench? If not, does it tend to move when being used? It seem too light for what is expected of it.
I have the same jointer and it definitely does the trick for a low price point/small shop/beginner woodworker. I did have some issues at first running some maple hardwood through without knowing exactly what I was doing. I had some pieces get stuck in the blades and when I went to remove the blades to take out the chips, I ended up stripping the screws. My advice, if you need to replace the blades, be careful with those screws and take your time. Nice review, thanks Tommy!
Thank you - I'm glad you enjoyed the review! Thanks also for taking the time to share your experience!
I have the older Delta version of this. Exact same jointer just different name plates. Use mine for short boards 12 to 24 inches. Works just fine. I also have a larger 6" floor jointer with a 46" bed for larger material. The only con I could come up with is making the infeed and outfeed coplaner. Being cast aluminium they have a tendency to warp if not tightened exactly.
Thanks for posting some feedback. So far so good on mine - only had it a out a year though, so I’ll post an update video if it develops problems. For now, I’m pretty happy with it for the relatively small amount of $$ I had to part with.
I also have the old Delta version of this planer. Bought mine back in the late 90's; still running quite well. I would suggest changing out the cutter blade screws for some hex-key head screws and adding a little anti-seize as well. The original screws, at least in the older Deltas, have a tendency to seize up.
5 years later it’s $99 at Menards right now after rebate.
Well done, great presentation.
Did you ever make the infeed and outfeed extensions for this machine? If so do you have a video?
Well done. Thx for the review.
Do you have a shop build using a hand planer?? Would be a nice companion for an all in one. Thanks for any info. Keep 'em coming!
Great video thank you!
Thanks for the review
No problem!
Most folks don't press against the top of the fence when pushing a piece of wood through and the bottom looks adequately stiff to maintain 90 deg when cutting wood.
Right. It does really good for the money, but the fence isn't as stiff as a higher quality jointer. I agree that in most scenarios it won't be a problem, only when jointing a thicker board with a angle between the 1st face and 2nd face that is way out of 90. I was jointing a 4x4 that had this exact problem and could notice flex in the fence. I had to concentrate to apply enough pressure to keep the 1st face against the fence, but not so much pressure that it would flex. A small quibble overall. Thanks far taking the time to share some feedback!
These benchtop jointers are all made in the same factory in China somewhere. Cutech will sell you pretty much that exact same jointer with a spiral (not helix) cutterhead.
Perfect video!! Looking to get one since I have access to essentially unlimited pallets.
Thanks - I'm glad you enjoyed it!
excellent review
Thanks! I'm glad you enjoyed it!
Thank you. subbed and liked
Grizzly offers a very similar bench top model w/a cast iron fence same price I haven’t got to use mine yet
Bart Giles let me know how it goes when you get a chance to use it. I’d be interested to know what you think.
Good video and well done, but I don’t know where you could buy that for 270.00 now in 2020
Trying to decide between this one , craftsman which I think is same machine and the shop fox which seems quite a bit heavier
I'm glad you enjoyed the video - good luck in finding the right machine!
Did you ever post the video on the fence adjustment, I can’t seem to find it.
Not yet...I’ve been so busy the last 6 months or so that I haven’t been able to get much done. I’m working on a couple videos right now though, and I’ll try to squeeze the fence video in there too. Stay tuned!
how do you measure the table tops to see if they are "co-planer" as you say....
I have this jointer an I'm wanting to do tapered furniture legs. Is 1/8 the most you can take off or is there another way to make it cut off more I'm wanting to take off 3/8 of inch
I think an 1/8" in the most it'll do. I know there are jigs for tapering legs with a jointer, but I found a simple jig from the guys at Fine Woodworking that works with a table saw. I did my own version of it, and you can see the video for it here: czcams.com/video/oSjVnMIanNE/video.html I hope this helps!
Excellent
Thanks for sharing
Thank you! I'm glad you enjoyed it!
Mine works great
Do you have a video of the extended infeed and outfeed tables?!?!?
Not yet, but I’m working on it!
Looking to get my first jointer, stupid question, can you run boards vertically through this (straightening the thin side of say a 1 x 6) rather than running them through flat as shows in the video?
RobsVette01, yes you can. That’s actually the point of the fence. Typically, you joint a face, then you put that nice flat face up against the fence, and run the edge through. If you’ve done everything right, then you’ll have a board with a perfect 90 degree edge to face, ready for further refinement....then you’re going to want to buy a planer 😉
When I removed the cardboard blade cover warning there was a piece of Styrofoam (I think). Felt like it any way. It was under the right side of the table. It doesn't seem to interfere with the blade but I am not quite sure if it is just some sort of insulation for the motor/wiring? Or if its supposed to be removed because its packaging. Do you have any idea if yours has/had the same Styrofoam? Thanks
I vaguely remember that, and yes, I would guess it would be removable. Mine definitely has nothing under the edge now. Also, which edge? The movable (infeed) table or the stationary (outfeed) table? It could have just been under the lip of the infeed table to prevent dust and other things from getting in, and to provide extra support for the movable table during shipping. I hope this helps!
It is under the infeed(moveable) table. When facing the jointer it is on the left side of the infeed table. It looks pretty wedged in there kind of shaped like this [ or a sideways U. I could probably get it out with some tweezers or surgical clamps. This is why I question its purpose because its far enough away from the roller and doesn't seem to interfere. But usually packing foam you can easily remove. It also moves with the table when you turn the table adjustment knob.@@OneMinuteWorkbench
Hmmm...I can’t be sure. Mine doesn’t have anything there, but maybe they changed the design. You could always call porter cable if you want to be sure. Good luck!
I had this planer for one year, I had heat in the cutter shaft after running for short time (5minutes). Did not think much of it. Ended up with play in cutter head on switch side. The belt side was tight. Porter Cable replaced entire unit just cost me shipping. Month later same issue, I thought it was the bearings, so replaced the bearing with a needle style, taking off the bearing on the switch side was very difficult, the belt side came right off. I noticed a burn mark on cutter head shaft. I ended up replacing the cutter head and installed new needle bearings. Still had heat in the initial start up (5mins) but seemed to get better with use. I ended up selling before any more issues and bought a cutech witch is basically the same planer with a spherical cutter head. I have milled 2 thousand board ft (estimate) running planer for 40 to 60 minutes non stop when I use it, no issues with heat or play in cutter head.
Thanks for the feedback. Mine is still going strong - I’ll update if it develops any problems!
Would you happen to know how to fix the table when it's not perfectly level when you co plane it. There is a considerable gap on either side of the table when you put a level on it
I’m not 100% sure, but my usual go-to for fixing any assembly that doesn’t seem right is to take it apart and put it back together, while trying to understand how things work along the way. Of course, it’s under warranty, you could take it back and swap it for another.
love mine
How would this do on a piece of hardwood? Like maple or something?
I’ve used it oak and it did a fine job, just a little slower than pine.
Did you ever make those extension infeed and outfeed tables? Would love an update.
Not yet...but really want to. As soon as I find time, so stay tuned!
@@OneMinuteWorkbench just curious if you ever did do those extensions? Would like to see them :)
@@distortedodin never did. I actually haven’t ever come to a project that required them, so I figured I’d leave well enough alone. I find that good grips go a long way though. I made my own, and do have a video on that. I hope this helps!
@@OneMinuteWorkbench Thanks. This was a very helpful video. I'll try to find the grip video.
So pretty much you would agree that this is the best jointer for the price? Im starting out and looking for something small and not outrageously expensive. Thanks.
I don't know for sure, because I haven't tested a bunch of different jointers. I do know however that my last jointer was much more expensive, and the performance was much worse than this one. I'm still very happy with it. I hope this helps!
One Minute Workbench It does! And it’s good to know price isn’t everything. Thanks for the reply!
No problem!
👍
Would you still recommend it?
Totally. I couldn't be happier with my purchase. For the money spent, it's incredible. I've owned a larger more expensive jointer (the brand shall remain nameless) that didn't perform anywhere near as well as this one does. I was worried about having a 6 inch width limit, but it truly hasn't been a problem for me. I have no regrets.
US$ 270 in India rupee how much
(English accent) "This one goes to eleven. "
lol - awesome.
If you buy this you may never know the joy of a Stanley No.5.
Capt Termite it’s true. Power tools tend to get in the way of hand tools use ;-)
I have no 4 only, is no 5 butter
It's 420 now on amazon
I got it at Menards for $99
This look identical to the craftsman tool
The fence kicked my a$$ too
So apparently the Porter Cable bench top jointer has a serious design flaw with its cutter head bearing pin / bearing. The bearing pin steel is seemingly softer than the bearing causing severe heat build up and even burn. I bought the PC unit from Lowes but luckily came across this info while I could still return it. Will wait for the Cutech models to come in mid-September. See this video for more details on the Porter Cable cutter head situation: czcams.com/video/i5HKJLb7sZE/video.html
Mine's still going strong. Will let you know if I run into any issues. Also it's worth noting that any of the jointers in this price range will have parts that are going to wear and fail much sooner than jointers in the 2-3k+ price range. Even those expensive models have parts that will fail, it'll just take them a lot longer than these little cheapos.
4:19
Thats $2700.00 in trinidad and tobago money...
Why is the fence always shit on this cheap jointers, it makes them useless? I would like to pay 100$, just for a better fence, the jointer would still be cheap.
PEOPLE, DO NOT USE BARE HANDS TO PUSH THE BOARD! IT'S SUPER DANGEROUS, ALWAYS USE PUSHSTICKS AND THINK CRITICALY ABOUT SAFETY!
It's irresponsible to film yourself pushing a board just with your hands. People will see this and assume that's how it's supposed to be done.
Thanks for the feedback!
Woodworking and makeup just don’t go together bro. Go easy on the eye concealer. 🤦🏻♂️
Victor Vek I’m not sure how to take that. I don’t wear makeup, but now I’m wondering if that means my skin looks good because you thought I was. Or maybe my skin looks weird...like when people wear too much makeup. What if by some weird twist of fate, your comment gets into my head enough and makes me so self conscious about my skin that I actually start wearing makeup? Haha...I guess I’ll bounce back from this experience.
@@OneMinuteWorkbench I made a self improvement video years ago, the producer introduced me to lip gloss, it really does make a difference both in catapulting out your words, and it also visually improves your lip movements in the video. ...I'm a lumberjack and I'm O.K!
lol - awesome! Thanks for the reassurance, now I can wear make-up with impunity 🤣 j/k I still don't wear make-up, but I do occasionally use chapstick....the winter wreaks havoc on my lips!
@@OneMinuteWorkbench Wife and I did a trip to the Netherlands about 10 years ago, the local pharms sold a lip balm that was unbelievable, the wife bought several to take home, but we never could find anything near as good here in the States, I think it had some kind of lanolin in it made from sheep? anyway, it's back to cracked mummy lips. ☺
I hear ya. I have a tough time finding good stuff too.
The fence is stupid