Video není dostupné.
Omlouváme se.
Rev9 Coilovers Installation/Adjustment Guide 2023 | Camber Plate | Height | Preload | Divorced Setup
Vložit
- čas přidán 6. 08. 2024
- In this 6 minute video, Jimmy@E-Autosports.com attempts to explain how to adjust and install your newly purchased Rev9 coilovers. This video covers camber plate adjustment, height adjustment, damper adjustment, setting up spring preload and ride height on a divorced rear coilover setup.
Coilover PDF guide:
rev9power.com/media/Instructi...
Shop Rev9 Coilovers On Our Website:
e-autosports.com/collections/...
Instagram:
/ eautosports
Facebook:
/ eautoinc
0:00 Intro/Overview
0:39 Camber Adjustment (When applicable)
1:33 32 Way Damper Adjustment
2:06 Preload Adjustment
3:16 Ride Height Adjustment
4:18 Divorced Coilover Ride Height & Preload Adjustment
This is the best instructional video I've ever seen
Thanks I found you after looking for days to find clear instructions looking forward to seeing my fFit with its new suspension
Thank you bro. Very informative. Learned a lot!
i have set of these on my 13 tc and love them
actually was very helpful
Love my rev9. Installed it on my 98 corolla
I just got them for my 88 corolla GTS
On the divorced set up, on the rear spring how does the adjustable piece sin in the spring? On top or bottom? Cuz on my sentra i like a cone shape bracket that the rubber piece sits in hits the bolt on that piece
Thanks 👏🏽🔥🔥
does this also work for awd c240
Hated the divorced setup on my SI, could never get the preload right I’m the rear
How you adjust preload
Hi I just ordered this setup and need to do some adjustments after installing them on the car. I was told to spin the 2nd ring to lower it.. do I have to spin the entire strut?
break loose the lower ring giving you room for adjustment you then spin the bottom mount to your desired height and tighten the lower ring back up
I have a 97 Nissan Maxima
I bought these for a 2004 Toyota Avalon. The struts that were removed were Sachs. I had thought they were OEM, but they weren't. I disassembled one and discovered this. They were also blown to the point that they compressed easily and did not return at all. Still, they were better than these Rev9 struts. These things are so noisy and make a grinding sound with the slightest movement of the car. I thought maybe my sway bar bushings or end links were bad so I replaced them. No difference.
If I hit the slightest imperfection in the road at low speeds, it sounds like my rear struts are about to come through the package tray, like my wheels are bolted directly to the frame without any suspension. I have owned a lot of old vehicles but have never experienced a worse suspension than these brand new Rev9 struts. I have had to order OEM struts now, for the rear first, since they are the worst. The parts alone cost me about $1000 and I will have to install them myself. I have already sunk $900-$1000 into these Rev9 pieces of crap. I'm not sure if I am going OEM on the fronts as well because it is difficult to get OEM parts. For some reason, one of the most popular cars ever is hard to get parts for. Makes no sense.
These struts are supposed to have a 1-year warranty, so I'd think I should be able to have Rev9 Power refund (or at least replace) these turkeys so I could at least try to sell them. I tried going to their website but my anti-virus went crazy and reports that their site is infected with a trojan. Makes sense.
Here is what these struts sound like on my car: czcams.com/video/8-R34CD8oxQ/video.html
My driver side damper froze up too soft and manufacturer won't help me out after I payed over $500 fml
They are ok . Lasted only 2 years for me.
What are the torque specs for the adjustable camber bolts on the front camber plates?
12 ft lbs
The "Rebound" adjustment is on the bottom. Not Bump.
What happens if you didn’t preload the coilovers before driving it
Without preload your car will take bumps like a train. Don’t drive it too fast or your tire could hop up and you’d lose control 😬
Sounds like Uncle Roger.
Avoid rev9 at all costs. Mine had a strut blow out in 3 months and neither the vendor or rev9 would not warranty the part. Also had their endlinks BOTH blow out within months of beijg on the car too
just buy new parts it’s rebuildable homie
@@doug.9306 I don’t think that’s his point lol. It was a brand-new product that failed quickly.
@@danieltrujillo5873my buddy has had rev 9s for 3 years now and their still holding
2 years with mines and no issues…
@culochi congrats good for you, just letting people know their customer service is dogshit and they won't help when it breaks
These vague videos are the reason most people don't understand the fundamental reasons for adjusting shock body vs preload.
Just say no to cheap coil overs and cheap suspension parts in general.