Cane across your video, I have just bought a 2014 maxsym 400i abs. The for taking the time to make this, despite some other comments its been helpful. Ride safe all the best from the 🇬🇧
@@gangelbright More professional than some of the 'professional' vids I've watched!! It certainly has helped me, the manual for the maxsym is as clear as mud!! i can't wait for a bulb to go pop now haha!!!
ALL THIS WORKFOR A LIGHT?IGESS THE SAME IS FOR THE BACK LIGHTS OF THE SCOOTER.I LOVE MY OLD HONDA SILVER WING WICH IS SO SIMPL TO FIX IT.FOR THE FRONT LIGHTS HAVE TO TAKE OFF ONLY 4 SCREWS FOR THE BACK HAS PLASTIC COVERS UNDER THE SEAT INSIDE FOR THE BATTERY ONLY ONE SCREW UNDER THE SEAT ECT.......THIS SCOOTER IS GOOD BUT IS TO COMPLICATE TO FIX IT.
@@miguelangelfernandezalvare1053 Yes you can simply remove them by hand from below the fairing... but to replace them is difficult as you are going by feeling. The retaining clips are difficult to locknas it hurts your fingers. I could not do it... that is why I removed everything.
Hi Gert. Great video. Do you know if there is an adjustment for the headlights? Both my headlight globes blew (apparently common) and was replaced by the dealer with H1 globes. Unfortunately my lights don't shine the same and the bright's don't show. The lights are useless know and the dealer just shrugs it off.
Hi there. Yes there are adjustment screws on the back of the light housing. I park the bike on the centre stand and shine the lighs on the wall and draw a line wih chalk through the spots where the lighrs are shining.... I then adjust it and do a test ride at night to judge the difference. if you lie under the bike you will see them .. plastic. My previous Maxsym (2015 model, blew headlight globes all the time.... no idea why?) My 2017 model has no issues with lights. PS:The two lights adjust individually snd the dim bright function works with a tilt mechanism which covers more or less of the globe when switching between dim and bright ie the globe itself does nothing. You bike shop sounds incompetent. If they are SYM agents, report them to SYM SA. Regards Gert
I think the dealer during dissasembly must have fiddled with and disconnected the tilt mechanism responsible for the dim/bright function. You should hear the tilt action if you switch between dim and bright. You can also see it tilt when you look at the light switching.
@@gangelbright I understand that the mechanic changed the globes from underneath without taking the covers off. The tilt mechanism is in its position at dim, then moves up when changing to bright's. Even though I don't have proper lights anymore, the dealer has said that they have done all they can, and won't change anything further. I have contacted SYM/KMSA to take it further.
I've seen the guys in Brazil fit LEDs which I ordered but I did not fit them as a slight modification is required in the headlight housing which I am not prepared to make...
Cane across your video, I have just bought a 2014 maxsym 400i abs. The for taking the time to make this, despite some other comments its been helpful. Ride safe all the best from the 🇬🇧
Thanks Gert for uploading the video, very very helpful. A big thumbs up from Lancaster UK
My pleasure Don. I know it is not professional but I hoped it could help someone😁
@@gangelbright More professional than some of the 'professional' vids I've watched!!
It certainly has helped me, the manual for the maxsym is as clear as mud!! i can't wait for a bulb to go pop now haha!!!
ALL THIS WORKFOR A LIGHT?IGESS THE SAME IS FOR THE BACK LIGHTS OF THE SCOOTER.I LOVE MY OLD HONDA SILVER WING WICH IS SO SIMPL TO FIX IT.FOR THE FRONT LIGHTS HAVE TO TAKE OFF ONLY 4 SCREWS FOR THE BACK HAS PLASTIC COVERS UNDER THE SEAT INSIDE FOR THE BATTERY ONLY ONE SCREW UNDER THE SEAT ECT.......THIS SCOOTER IS GOOD BUT IS TO COMPLICATE TO FIX IT.
Hola, no hay otra manera más fácil de cambiar las bases bombillas de Maxsym 600? Saludos
Fantástico video
Sorry Miguel... I am not sure how to translate your message...
@@gangelbright Hello, is there no easier way to change the bulb bases of Maxsym 600? Greetings
Fantastic video
@@miguelangelfernandezalvare1053 Yes you can simply remove them by hand from below the fairing... but to replace them is difficult as you are going by feeling. The retaining clips are difficult to locknas it hurts your fingers. I could not do it... that is why I removed everything.
@@gangelbright thank you very mucho, i Will try, you are very kind. i thought i was wearing h4 but i see in the comments that It is h1
Hi Gert.
Great video. Do you know if there is an adjustment for the headlights? Both my headlight globes blew (apparently common) and was replaced by the dealer with H1 globes. Unfortunately my lights don't shine the same and the bright's don't show. The lights are useless know and the dealer just shrugs it off.
Hi there. Yes there are adjustment screws on the back of the light housing. I park the bike on the centre stand and shine the lighs on the wall and draw a line wih chalk through the spots where the lighrs are shining.... I then adjust it and do a test ride at night to judge the difference. if you lie under the bike you will see them .. plastic. My previous Maxsym (2015 model, blew headlight globes all the time.... no idea why?) My 2017 model has no issues with lights. PS:The two lights adjust individually snd the dim bright function works with a tilt mechanism which covers more or less of the globe when switching between dim and bright ie the globe itself does nothing. You bike shop sounds incompetent. If they are SYM agents, report them to SYM SA. Regards Gert
I think the dealer during dissasembly must have fiddled with and disconnected the tilt mechanism responsible for the dim/bright function. You should hear the tilt action if you switch between dim and bright. You can also see it tilt when you look at the light switching.
@@gangelbright I understand that the mechanic changed the globes from underneath without taking the covers off. The tilt mechanism is in its position at dim, then moves up when changing to bright's. Even though I don't have proper lights anymore, the dealer has said that they have done all they can, and won't change anything further. I have contacted SYM/KMSA to take it further.
@@grtnomel5607 Totally unacceptable....
The H1 globes are much cheaper from Midas than at the bike shop.
Hi there. The MAXSYM takes H1 globes
I've seen the guys in Brazil fit LEDs which I ordered but I did not fit them as a slight modification is required in the headlight housing which I am not prepared to make...
Tks for the positive comment Pablo. I am glad it helped you. I know it is not a proffessional video....
@@gangelbright Don't diss yourself. Your video is excellent, especially compared to others.
@@grtnomel5607 Tks vm. Your comment is much appreciated👊
What bulbs does the maxsym 600i ABS take? H7 or H4?
H1
What a stupid design for changing consumable parts!!! I changed twice the lights on that thing. Shame to the one whom approved that design.
I agree. I suppose if you are flexible enough with small hands and fingers of steel , you can do it without removing the fairing... but I tried...