SPEC chassis for 2nd Gen F-Body
Vložit
- čas přidán 23. 11. 2020
- IT'S HERE!!! Possibly one of our most hotly requested chassis setups - SPEC for 2nd Gen F-Body is all new and ready to rock!
Phil and Jeremy Gerber walk us through the unique features for the Roadster Shop 2nd Gen SPEC chassis setup and highlight the details that make this chassis such an appealing package for any 1970-81 project.
ZERO FLOOR MODS NEEDED. Fully, bolt-in, complete chassis - Full details, standard features, options and pricing here:
roadstershop.com/product/full...
See the build gallery of our 1970 Trans AM SPEC project HERE - roadstershop.com/galleries/19...
---
Why SPEC?
- No kinks, bends or stressed areas that are prone to flex like mandrel bent tubing.
- Ability to contour to stock floors for no floor modifications on most applications.
- CNC located factory mounts built into the frame for easy, vehicle specific installation.
- Frame rail designs to accommodate 325 width rear tire with mini-tub.
- Add the strength of a full frame without modifying the floor of your vehicle.
Standard Features:
- RS exclusive “Laser Rails” precision CNC laser cut and contoured
- Crossmembers and chassis bracing to allowing for 3″ exhaust
- Engine mounts for SBC, BBC, or optional LS & LT
- Adjustable, drop out trans mount
- No floor modifications required for chassis installation
- Trans tunnel mods may be necessary for larger automatic transmissions
- Utilizes factory body, bumper, and core support mounts for a true bolt-on installation
- SPEC IFS
- RS SV by Fox fixed valve coilovers
- Power rack & pinion steering
- Easy to adjust upper a-arm eccentric mounts for fast and accurate alignments
- Wilwood Pro Spindle
- Parallel 4-Bar rear suspension
- Ford 9" housing with 31 spline axles
Video Guide:
0:10 Introduction
0:39 Backstory of 2nd Gen F Body SPEC
2:16 Powerplant Options
2:34 Transmission Options
2:57 2nd Gen Design Brief
4:02 Unique SPEC Chassis Details
4:54 The Brake Line Problem
5:37 Chassis and Body Mounts
6:19 Unique 4-Link Setup
7:06 Standard and Optional SPEC Details
7:45 EZ SPEC Install
8:14 Let's See Those F-Body Builds! - Auta a dopravní prostředky
Now this is an upgrade that I would invest in for my 70 Camaro, this is next level stuff
From what is see this is the way to go. These guys covered everything to make the 2 gen jump in the 21 century and keep with todays cars on the road. This will bring new life for the Beutifull old cars. I so want one having two 1970 -71 Formula Firebirds
This chassis should never be painted, what a work of art. Shoot it clear. Jeez, so beautiful!
Nice, hope to use my first few checks from my retirement to finally finish my '80 Camaro I've been hanging on to since 1983. This looks like the perfect base for it. Thank you guys.
amazing work
Great work
Nice work
Beautiful
This is perfect for the 79 im working on. Great job
My ‘71 needs this!!! Gorgeous
This is Marvellous work!
So much want. That's a beautiful chassis
Very professional quality and presentation. I like the compact, yet detailed information. Good stuff!
You guys are awesome! I've never seen anything put out by you guys that could be considered Near half assed. You post more I'll keep watching!
Wow you guys really know what you're doing I love the fact that you guys could put this out into the market, I feel it's going to be big as second gens are getting more and more popular by the day. Awesome job brothers
Beautiful work of art. Wish I could install this on my 73 firebird. Gorgeous job!!
I love what you guys do.it’s very neat.I hope to bring you a car to build very soon.
Holy cow. I feel I’ve been looking fir you guys my entire life.
Wish this had been available when I built my 72 Camaro... (finished in 2003) Would have done my best to scrape the funding together. However to go back and start over is not feasable... not does it make sense at this stage in life for me. Maybe, whoever buys it, will have the budget and the drive to take it to this next level of performance. Would gladly send pic, but youtube doesn't support such a response. Awesome job GUYS!!!
Big fan of your work and been following your company for a few years now, my goal is to get a least one built by y’all. Keep up the excellent work
I hope fellow car enthusiast can appreciate what these guys have accomplished
Taking old school to next level high tech , awesome job
I would love to put this chassis under both my 1971 Camaro and 1980 firebird. Great job. Looks amazing.
Beautiful stuff!
Amazing design and work you put into this. And the CAD video showing how it bolts in a deal closer.
My 77 TA so needs this and what a work of art that chassis is. I so wish I could have went this route. Congratulations on your success and your shop is amazing!
Looks great!
That's so cool.
That's a super dope chassie you guys made awesome work
Cant wait to get mine! Got one on order.Also, the professionalism/service of this company is spectacular.
Very impressive that they have a full Solidworks CAD file of the entire car. Its a lot more worrk up front, but a huge savings down the road when you go to assemble the car and everthing fits as planned.
Love the story on the TA..
My first car was a TA 455 cameo white with blue interior🤘
Haha - really? That's amazing.
I can dream about putting that chassis on my 80 trans am, it sure looks nice. Great video.
Love this
I've had my '78 Z since 1985. I was in high school. For so. many. years. it was the least-respected Camaro ever. So great to see such love for these beautiful cars. Your new chassis is now on my bucket list. Well played.
impressive
Now This a Fascinating and Interesting investment...
Just got me a 79 Camaro that would be a awesome upgrade 😎
Still have my #s matching LM1 80 z28 with t's since highschool 88'. Would be tons of fun....no xtra cash thanks to Covid.
Love the way you did the suspension and everything the frame is outstanding one thing you didn’t mention did you consider the wider wheel tubs in the rear so you put real tires back there. I was just checking on that and hopefully you do you had an integrated him thank you .
Thas sick would love to have it for my 1980 TURBO TA
I will take 2 of these 72& 81 trans am
BAD ASS !!!
Wish i could afford this for my 1970 camaro...
Ground clearance was a major problem for mufflers great job guy wish I had my 71 bird back 😢
These guys make muscle cars handle, they are the gods 🔥🤙
We're mortals - but thanks - we love making things go fast (and handle)!
Where you guys located and can I pick up two of them
Massive upgrades, I was a little surprised that with all this, you didn't look into using a Corvette, aftermarket, etc. rear I.R.S set up. Great stuff.
Talk with them, they can put in whatever you want for a rear end. :)
@@mikalnaylorI'm sure they can, but I doubt they have the calculations or the program/setup for it. Would probably be custom, so expect to pay $$$ more than the already $$$$$$. They can do it tho.
Top demais queria muito trabalhar em uma empresa como essa ✌🏽✌🏽🇧🇷🇧🇷
2nd generation 🔥 🐦
Do you have one for 1971 chevy Nova? Looks great!!
I need that chassis.
Looking for a good body to mount to it now
This is exactly what these old F-Bodies have been needing. The unibody structure and A-frame front end doesn't make for a very solid chassis, especially if you want to build a 600+ hp pro touring sports car from a 2nd Gen Firebird/Camaro line. Looks like I have some saving to do for the system I want on my 78 Firebird Formula. Looking forward to this one.
How cool is that, you can turn your 6 cylinder grocery getter , into a beast at the track
Can you possibly do a install video on this set up
This is not a second generation Camaro!!! Great work and love the car!
What size tire fits under the rear of a car with this setup?
Wow, I need to save up! If you guys want to sponsor my firebird and have this installed, let me know!! lol
What does this do to the ground clearance? Also, does it cause the body to sit higher? Can it accommodate a Butler Pontiac engine?
You guys have to make Independent rear suspension. That would be a game changer
SPEC is designed to be an easier bolt in product and so IRS is not accomodated in this chassis lineup. In FAST TRACK however we do offer IRS as an upgrade. roadstershop.com/product/full-chassis/1970-81-camaro-chassis/
You mentioned chassis had LS & LT motor mounts. But what about Firebirds running factory Pontiac power?
What width tire can you fit without mini tub?
круто!
I have a 72 grand prix would that fit or would u need to make a whole new frame for it???
I’m gonna put this on my z28 but it’s a 2000. Some bits might stick out ;)
Don’t think that’s gonna work bro
@@alexbrook9871 lol
Will this allow for a t-56 magnum f or only the older t-56
why would you not put adjustment holes on the lower control arm to get more antisquat?
What's the turn around on the frame time , I need this, it's about time someone did this
Give us a call whenever you are ready to order and we can give you an accurate timeline. 847-949-7637
@@RoadsterShop amigo quisiera comprar un chasis soy de Perú cuál es el precio y el procedimiento de compra .....ó talvez me puedes vender los planos para poder fabricarlos aquí mismo
What kind of money does this kit run? Can a sbc350 with turbo 350/400 bolt in?
Which software do they use? Who knows it? Thank you so much
What tire widths on front and back can do fit without cutting? I am assuming if you put in a 325 rear you will loose the back seats?
I am running a P325 in back of my '81 WS6 TA without tubs, & using factory 7.5" x 15" wheels. This was achieved with just a pair of billet, hub-centric spacers. Mine were 13/16", but I'm pretty sure 11/16ths would work a hair better & keep the tires from contacting wheelhouse, or shock tubes/leafsprings.
Beautiful chassis. Do you plan to offer Pontiac motor mounts for this product? That's virtually the only thing that would make me consider the Schwartz full frame over this.
Robert - give us a call and we can go over options for motor mounts. 847-949-7637
That's awesome! Now I just need to sell my first born or hit the lotto to be able to afford it! Haha
Professional products/ professional prices. Not hating, just not anywhere near most DIY guys budgets. But we can dream and drool... 🤤
I love your vids I have a 77 how much is this
Thank you! $11,995 complete for this one.
I love this, is it available?
Yup - link in the description.
I have a 1979 Camaro Rs that I placed a z28 body kit on it. After halfway work from shops spending 3-4K on the body and still not being satisfied. Along with other work that barely puts a dent in the project. If you’re interested in taking her in to fit up your stuff
Feel free to do so ((:
Well we already built the chassis around the '70 T/A in the video, but we would be happy to finish off the car. If you're interested in doing a full build let us know.
man i would love this but it pushes the car weight over 4250 lbs...
Do you ship to Canada 🇨🇦?
From BANK’S POWER
Why no option to run a true PONTIAC motor under a Firebird. They too can be built to go fast (or faster), than a Chevy motor. Look at what "Big Chief" has proven. Wide port Edelbrocks, Tiger, Ram Air V tunnel ports can flow alot of air, not to mention the billet heads. All I'm asking is it should be an option, even at an extra cost. Aftermarket PONTIAC blocks,forged cranks and better breathing heads have made the PONTIAC V8 a horsepower and torque monster. If u don't want to do that, build a frame for a 4-wheel electric motor 2nd gen F-body so a Firebird Trans Am could live into the 22nd century. Hopefully before the government forces everyone to buy an electric powered vehicle. Thank you for building an "Awesome" frame. P.S. Someone has already built a 1965 or 66 Electric Ford Mustang. Don't u think an 1970 and a half or 1971 PONTIAC TRANS AM more powerful all electric powered car should pull up in the other lane?
We can certainly build mounts as a custom option on these. We just don't get enough demand for the Pontiac powerplants to make them a production item.
Would love to have this but at 12 grand its out of my pocket book
Id rather pay 12k for this versus 11k for independent rear from Heidts.. much more overall bang for the buck
Powder coating is $3000 - can I use bed-liner?
How do I get sponsored for a frame for my 78- will work for frame
How much hp can it handle??
Could this be done in an IRS setup????
IRS is an option on our FAST TRACK chassis setup - check them out on our website.
Aqui no brasil e muito e muito burocrático esse tipo de serviços
its PERFECTION! to bad my project car is a 1978 original turbo regal with Ttops, Schwartz performance has what i want but waaaay to expensive, to the point, I can teach myself to weld and build the frame myself for 20k plus. i can do it on Autodesk fusion 360 and 3D print it in 1/10 scale or 190mm and make whatever tweaks needed before building full scale. this hobby has gotten to expensive, ill build my own.
For about $11k - you get a laser cut and welded chassis, Fox suspension tuned by RS, mounts for whatever motor you want, and all modern suspension geometry that bolts under your car. Let us know if you don't end up DIY'ing it - we'd love to help you out!
You have so many options for the Camaro / Firebird cars , why do you not build a SPEC series chassis for the 68-72 Novas? Only TRAK series? Any reason for that?
The goal of the SPEC series is to simplify installation typically without removing the factory floor. Doing so requires a larger amount of engineering than the Fast Track lineup in order to make that easier install work with the factory floors. Some vehicles it's just not possible to do this - others we haven't had the opportunity to invest the time required to create the SPEC chassis - and others yet are just not great candidates for the SPEC lineup.
@@RoadsterShop thanks for the informative response. 👍
How much does it cost?
Do you have anything for the 1984 trans am?
Yep! Our Fast Track is available for the 3rd gens. Available with IRS optional. roadstershop.com/product/full-chassis/1982-1992-chevrolet-camaro-chassis/ Let us know if you have any questions.
When I have a Pontiac, Have to have a Butler performance engine. Not some Chevy.
BullyBilly.
So am I reading this right? You guys are putting a frame into a uni- bodied car? Or are you putting a better frame into an already framed car
Frame into a unibody car
We've designed the chassis to work with the factory sub rails.
Very cool! Can it be ordered with powder coating?
Absolutely!
🍺✅👍🏼🙏
I'm going to be swapping a 1971 camaro front clip onto my 1980 firebird and was wondering if this full frame would still work on something like that? Still a great looking frame.
It eliminates the need for the front sub frame
I'm loosing my mind, will you trade my C10 for one of these chassis done up? I am pulling the most beat 79 z28 out of a field and putting this chassis under it!
What’s is the price on something like that
roadstershop.com/product/1970-81-spec-camaro-chassis/
How does someone order 1 of these
Call us at 847-949-7637 or email to info@roadstershop.com
damn...
this can't be cheap lol
#ProTouring
If $$$ wasn’t the issue… the build
the want .. and dance .
Is the checks
I put my last name on .
$ and my fate have oppositions on something I can’t put a finger on. 😅🤠🤑😇😕