Bandsaws: Mastering Setup and Use - A No BS Guide
Vložit
- čas přidán 9. 07. 2024
- *Support What we do at KMTools.com
In this video, we're going to cover the basics of setting up your bandsaw and learning how to use it. We'll discuss the importance of tension, how to adjust it, and some common uses for a bandsaw.
If you're interested in woodworking but have never used a bandsaw, this is the video for you! By the end of this video, you'll be able to use your bandsaw to great effect!
Let me know what you’d like to see next! Please like, comment and subscribe.
----
Products and Videos Discussed Support what we do at KMTools.com
Andy Klein’s Bandsaw Tension App Explanation Video (update coming soon) • New Phone App for Band...
Bandsaw Tensioning App IPHONE shop.kmtools.com/TensionAppIp...
Bandsaw Tensioning App ANDROID shop.kmtools.com/TensionAppAn...
Bandsaw Flush Trim Jig kmtools.com/products/bandsaw-...
Bandsaw Flush Trim Jig Video • Make flush-trimming a ...
Miter Slot Locking Hardware kmtools.com/products/miter-sl...
Timberwolf 1/2” Blade amzn.to/3QVTgUH
Timberwolf 1/4” Blade amzn.to/3QWkBWT
Timberwolf 1/8” Blade amzn.to/3ucpp1e
Andy Klein Bandsaw Sharpening Jig • Bandsaw Blade Sharpene...
The Katz-Moses Woodworkers with Disabilities Fund ABOUT kmtools.com/pages/kmww-charity
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
----
Timestamps
No BS Bandsaw Intro 0:00
Bandsaw Setup and Blades 0:34
Bandsaw Tracking 1:22
Bandsaw Tension 3 Methods 1:56
Tension Your Bandsaw with Your Phone 3:37
Setting Up the Guides 5:28
Types of Bandsaw Blades 6:52
Resawing on the Bandsaw 2 Ways 8:28
Cutting Curves on the Bandsaw 11:32
Bandsaw Flush Trim Jig 14:06
Bandsaw Zero Clearance Tip Tip 14:56
Bandsaw Tension Tip 15:31
NO BS Outro 16:10
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA - Jak na to + styl
Products and Videos Discussed *Support what we do* at KMTools.com
*Bandsaw Tensioning App IPHONE* shop.kmtools.com/TensionAppIphone
*Bandsaw Tensioning App ANDROID* shop.kmtools.com/TensionAppAndroid
*Andy Klein’s Bandsaw Tension App Explanation Video (update coming soon)* czcams.com/video/sW-afPosTaI/video.htmlsi=Bwi5PV5GM3VGCTK3
*Bandsaw Flush Trim Jig* kmtools.com/products/bandsaw-flush-trim-jig-5-pack
*Bandsaw Flush Trim Jig Video* czcams.com/video/VsLN_gJvCZA/video.htmlsi=NZd8IEsWABMQjMn4
*Miter Slot Locking Hardware* kmtools.com/products/miter-slot-hardware-kit-for-jigs
*Timberwolf 1/2” Blade* amzn.to/3QVTgUH
*Timberwolf 1/4” Blade* amzn.to/3QWkBWT
*Timberwolf 1/8” Blade* amzn.to/3ucpp1e
*Andy Klein Bandsaw Sharpening Jig* czcams.com/video/aZXlvm8qqHQ/video.htmlsi=7_e9WMZPdgAklQaK
*The Katz-Moses Woodworkers with Disabilities Fund ABOUT* kmtools.com/pages/kmww-charity
What a helpfull video! Thanks for the NO BS series. I wanted to purchase the app but i get a message the app has been made only for older android version. Any chance on getting this fixed?
Greetings from Holland.
Something that is so basic it is easy to overlook - make sure your table is square to your blade! I once spent an hour fiddling with the guides and my fence trying to figure out why my resaw was skewing off track and the table wasn’t at perfect 90 to the blade
I feel your pain, been there
Same for me. I wound up having to shim between the table and the trunnions using a cut-up soda can to get the table square to the blade on my Grizzly 14 inch. After that resawing worked like a dream.
I keep a square at my bandsaw, just for this purpose.
I've been building for more than thirty years and I *still* pick up a tip or two with your no BS videos.
I swear this is sorcery. You put out a sharpening video the same day I purchased a book dedicated to sharpening and this week I had my first bandsaw delivered. Was planning on setting up these next couple of days
As you point out in showing your testing rig, bandsaw tension is set in pounds (lbs). There are actual tension gauges available to set the tension; one of the best is from Starrett. The saw itself plays a huge role in selecting the target tension, so it would be good if the app allowed for cast iron vs. welded steel bandsaws etc. I have a 24" Agazzani that I run a 1" carbide Trimaster blade on tensioned to 35,000 lbs, and it works beautifully. I also have a 17" Grizzly, and there is no way in the world that saw could tension any blade to 35,000 lbs, as the spring would be in coil bind well before that, so the type of saw is very important to determining the target tension.
WOW! I have never seen or heard of a "follower" for templates, but that is absolutely brilliant!
I watched another content creator recently. I LOVE his comment. “I’d rather eat a frozen pinecone than change my bandsaw blade”. This is how I feel. I think it’s more about making sure i know how to set everything up. So this is super helpful. I mainly do straight cuts and resawing on my bandsaw. So I have my amazing resaw blade installed. But I’ve gotten into doing some template routing. And I KNOW that I should put my other blade in. But I’ve just been too lazy. This was super helpful> I may end up changing it today.
This was so much help! I rarely use a bandsaw, until last night trying to resaw for the first time.
Thanks for sharing your knowledge in a down-to-earth way everyone can understand and no shenanigans.
The timing of this is perfect for me. I just ordered my 1st 14" bandsaw. Thanks for the great content.
Good to see you back!
Perfect timing! My new Timberwolf blade arrived the other day for my Rikon 10” saw. My project today was to install it and set it up. And BOOM! You released this video🙃. Love these no BS videos. I will be downloading the app to give it a try as part of my set up.
Thank you for this video, Jonathan. As a cautionary tale, I ruined a Rikon band saw during my move because I forgot to detention it. During the move (summertime in the Eastern US) it was on the truck several nights and when I finally got to it in the shop, the main spring was toast. Still to this day I can’t find any way to replace that, so now I have to replace the entire saw. I’m heartbroken and wallet light. But, your video will be key when I finally get that new saw and get it tuned and set up. :)
Amazon sells a Carter tension spring for 14" bandsaws - called a "cobra coil bandsaw tension spring", about $35
Really excellent tips, Jonathan! Thanks a bunch! 😃
I still don't have a bandsaw, but I definitely want to get one!
Stay safe there with your family! 🖖😊
Thanks for the tips. Especially on the tension and setting it up. Mine was all wrong, but I took the five minutes it took to set it right. Thanks again.
This is just an amazing series. As a newer woodworker, this is taking a lot of the fear out of moving from hand tools to my inherited power tools. Thank you for producing these, and thank you for making an app! I never would have thought of measuring the frequency of the blade! You and Andy Klein are a dangerous combination! I would love to see your take on a circular saw, and the drill press. Might be shorter videos, but maybe combine a few different tools into one? Thanks again!
Really liking these No BS videos! Great information for beginners and refreshers for more experienced woodworkers.
Thank you my friend
Another great video and amazing tips for new woodworkers. Thanks for sharing
Something I think might be interesting for a No BS video would be fences. How to set fences properly. Differences in fence styles and lengths. Recommended fence upgrades via purchase (Bow XT extender, Jess Em stock guides, etc), as well as jigs or other construction that can be made to compensate for a fence that won't keep square or is too short (a contractor saw fence, essentially).
Brilliant video Katz Man! Keep ‘em coming!
I don't have a bandsaw yet, and have been somewhat intimidated by the tool. This video really helped me understand what's involved in setting one up (and gives me some ideas in what to look for in my bandsaw purchase).
Super helpful video as I just got my first bandsaw yesterday! Picked up the app for my iPhone- great tool to have to helpful remove some of the guesswork.
Just put the blade tensioning app on my iPhone and iPad . Getting the blade tensioning right is so tough for me. Can’t wait to give this a try. Keep up the “nerd” work. Love the insight you give us mortals. Rob
I am really enjoying the No BS series
Thanks for the video! I was just gifted a bandsaw a week ago, and have no clue where to start. This helps a lot.
Great series, man. Thanks for these videos!
Great video. I've used a similar method for tuning my bandsaw using a guitar tuner.
Great job always get a lot from them. I have a 14" Delta and love it.
Jonathan, this video could not have come out at a better time! I just finished cleaning and replacing the guide bearings on my 14” Craftsman bandsaw last night in preparation for getting back out in the shop after a long hiatus. The app has been purchased and I’ll be using it when I install the blade today! Thanks for all the awesome no-BS videos!
I own a craftsman also. Unfortunately since Sears went belly up support for the saw doesn’t exist. However, I found that my saw must have been built by Rikon or the manufacturer of Rikon. Mine is a cross between the 10-324 and 10-325. I’ve been able to buy parts and accessories that work perfectly with my Craftsman. And it is a great saw.
@@mwoody4560I have a Rikon 13-900 rip fence on it. Bolted right on with no modifications.
Great video Buddy!
Love the flush trim jig!
Digging the no bs videos thank you
Great video, and just in time. I had a blade wandering and everything was tuned up, not running on bearings, not over tight, or loose on the tension. Tracking was perfect, back of gullet riding right on the center of the tire. Wouldn't you know, the blade was dull...I didn't realize how dull until I swapped it out. Thank you!
Great information as always. I thought that the blade had to be tight, like a scrollsaw, thanks for clearing that up for me.
thank you Katz . i have the same bandsaw . i use a 3/4 " 3 tpi for resaw and use a disk grinder to resharpen it it takes about 18 mins . on the face . after i got it a wind fall fell into my lap . trees dropped in my area . 200.00$ chain saw and i have logs to boards . pear . china berry , birch and oak . sitting on cinder blocks an 2/4" pear is chest high . lots of work but good wood .in 72 i learned to open blades . i forgot how by 2014 lol . at this time i got 8 white oak logs waiting for health to improve and to finish building Izzs chain saw jig / sled . thank you for all you do .
It is so funny - I am blessed, that's for sure - some people might call it coincidence, but this happens to me all the time. I just bought a Rikon 10" bandsaw, and I've been watching a ton of videos on setup, and I get this email today, because this video was just made. The same thing has happened when I ran into a hiccup while trying to learn something while playing guitar, or when working on my photography, or ... etc - I'm not kidding, it is awesome, so, thank you for this. PS I bought the app, without even finishing this video. Here's hoping it works as expected, when it is out of beta.
Great timing
Just picked up my bandsaw
Interesting tip on de-tensioning the blade
I won't use it daily so this is a good one
Top man, another winner. Thank you.
Thank you my friend
BTW, I really enjoyed the segment. Like most of your CZcams, it was very informative and enjoyable to watch.
You are da man! Thanks for the no BS info 😊
I’d love to see a no BS guide to changing jointer knives/basic jointer set up. I have an older Jet jointer with straight knives and it was extremely nerve wracking to swap the knives and dial it in. Great series of videos, thanks!
I have a 14” wood cutting bandsaw and love it. If you think putting a new blade on can be intimidating, you should try that on a horizontal steel cutting bandsaw, where the blade twists almost 90 degrees to go around the pulleys. I’d also just replaced the guide bearings so everything was out of. whack. I enjoyed your video, keep up the good work. Almost forgot regarding changing blade, I have only one arm which doesn’t help either.
Thank you, I've been butchering band saw set ups since I was a kid.
Great video! I got a Hammer bandsaw, will buy the app when it has support!
Always had issues it’s my small band saw, defo gonna try these techniques
Thanks Jonathan. I don't have a bandsaw but I'll refer back to your video if I ever do. 😊😊😊
Wow! Downloaded the app and many thanks for sharing these basic things! The last thing I want to be is some smart^&% know-it-all, yet I struggled for a long time to stop my blade from wandering, no matter how hard I pushed it against the fence. It turned out that my table wasn’t 100% square to my blade when leaving the factory. It might help others to also check that in addition to your wonderful informative video!
Oh, and my bandsaw is the Hammer N3800…
Awesome, I use Grizzley 513 17" saw, and always wondered about this. The blade is 131 1/2". Thanks for the great info
Highland woodworking wood slicer resaw blade. Fine woodworking a few years back voted it to be best 1/2 inch blade for resawing. It is really good. I bought the app. Thanks.
Great information and will be using the information
Glad it was helpful!
Several really good tips. Blade tracking and tension, templet jig, how to adjust bearings, types and width of blades. However you didn't cover aligning the miter slot to the blade and the fence to the miter slot.
That’s more table saw setup. A bandsaw is a rough cutting tool and those things aren’t as critical
Found an old bench top bandsaw. This will really help me tune it up. Do you look for the 1/2 deflection on all sized blades?
Great video, timed perfectly! Thank you.
I downloaded the app and used it on a Laguna 14BX with a Timberwolf 1/8” x 14RK 0.025 … I couldn’t loosen the tension sufficiently to get into the desired range and it felt scary loose. Interesting, I cleaned my blade (it had some pine resin/sawdust) and, without moving my phone, the frequency changed slightly. I’ll check the next blade when I need to change for the project, but am apprehensive about running the 1/8” at such a low tension (reading below 0 on the built in reference). Keep up the great work and I look forward to the updates to the app.
I'm an early adopter of the app and would love to see Laguna resaw king carbide tipped blades included. Also the highland woodslicer blade. Thanks so much!
thank you
I would love to see how you store your bandsaw blades. I Haven't found a good storage solution for my small shop yet.
Great video. Thanks! Please look at tension parameters for Highland Woodworking wood slicer resaw blades if you haven't already. The skip tooth design of these makes them so nice to use and makes for a great cut surface.
A recommendation for the app, that could help inexperienced users (and you, if you start selling bandsaw blades through your site, or if you have affiliate links): Blade recommendations by usage. When you're on the screen to set your parameters, put the type of cutting first in the list. Have the app default to recommended blade width and tpi automatically, and a link to where we can get your recommended blade for that setup. Then, if they don't have that exact blade, they can adjust parameters to the closest of the ones they have.
I know the more advanced users won't need to be reminded of the recommended type each time, but it could be a nice perk for the newer users.
Not for nothing, but finding another way to offset the cost of the app might be a good idea. Don't get me wrong, it's a cool idea, but raising the cost more than $5 on something that is basically a combination of a single data reference table and a free guitar tuning app is probably going to be pushing it.
(and coming from someone who's bought quite a few of your products, i mean this in a constructive way, not trying to negatively criticize)
Thanks for another great No BS video!
Really liking the no BS series, JKM. An idea for another episode could be the “No BS guide to finishing”.
That’s coming real soon
With respect to TPI I have had a lot of success with the guideline of “enough to have 4 teeth in the cut, or 3 tpi, whichever is coarser.” You don’t want to cut 1/2” stock with a 3 tpi blade, but for resawing 6” stock 3 tpi is great.
Awesome, I was wondering if I could just tune my saw to a specific note or frequency
I really appreciate this series of videos. They're incredibly helpful for me as a beginner. I'd appreciate it if you could do one on jigsaws. Sounds stupid but I still haven't gotten a decent grip on them.
Pun intended hahaha?
haha, I missed that one!
Could we get a no bs jointer video? Loving this series
Always looking to up my bandsaw game. I like my 10" Rikon saw, but I think it's time to invest in some nicer blades. I keep watching for a used 14" saw, but haven't had any luck yet. Really enjoying this series, thanks for the tips!
keep looking. I picked up an old 1990's 3/4HP Delta 14" for $100 on craigslist last week. They're out there and old wood workers are getting out of the hobby every day.
id love a no bs video on drying wood or tips for selecting large pieces of wood from a lumbar yard.
App looks interesting, add the Highland Woodworking "Wood Slicer" blades! (if you haven't already) TimberWolf and Highland blades are about all I use these days! Nice video!
Once again, an outstanding No BS video! Your timing was perfectly timed for what I need to do with my saw. How about adding the Laguna resaw blade?
I really love your videos and that's no BS! In the past, when you over tightened your blade, did you have a lot of blades break? I have a friend who swears that tighter is better but I am skeptical. Could you please expand on the why of proper tension on a bandsaw? Thank you!
Thank you Jonathan, downloaded the iOS app & went out to my Jet 14" band saw that currently has a 105" x 3/8' 3 TPI Carter AccuRight blade installed - I was amazed at how under tensioned the blade was. I set the manufacturer parameter to 'Other' - the app worked perfectly. My one question is does the temperature of the blade and ambient surroundings have any effect on the tension tuning (I'm in NJ, my garage temperature was 54 degrees) If so how often, or at what +/- temperature variation should I expect to re-tension?
Good video on the bandsaw. How do you go about cleaning your bandsaw blades? Mine seemed to get dirty easily and it takes forever to clean them
I bought a used band saw at a friend's garage sale a few years ago and haven''t set it up yet. (small space) I am really gaining good knowledge from your videos. I play guitar and have an electronic tuner - think that might work if I find the right pitch to tune the blade? Thanks for all the info.
Defo the best hair on CZcams! Sadly app is not compatible with latest version if Android so I could not buy it.
i hope you will include smaller bandsaws.. i will definately purchase the app if you do... for the RECORD i have a RECORD BS250
Great video, I'm buying the app. My blades are a Highland Woodslicer 1/2 in, a Resaw King 3/4 in, R & D Tufftooth 3/8, Viking 1/4 in , all 111 in long, on Rikon 326. It seems to have enough power for the 3/4 in blade.
Excellent tips…If you have never used a wood slicer re-saw blade from Highland Woodworking then you owe it to yourself to try one.
Thanks for the video. Would have liked to check out the app but I couldn't because it was made to work with a older android version.
Ace as always! The App looks great, would you consider adding the Axminster range of bandsaws for us over in the UK? ;)
I’d love to see you do a tutorial on wood turning. 1:40
Excellent video. Than you JKM. One helpful hint that would have helped (If it is true). When the cut is tracking to the left, the blade needs to be adjusted forward and vice versa, if it is tracking right, the blade is too far back on the wheel. I am pretty sure I learned that from Mr. Snodgrass.
Feels like we should test that. Makes sense and has never crossed my mind
@@katzmosestools That has always been my issue with my Harvey Ambasadore. I can't keep the wood against the fence. It walks away (need to move the blade toward me.)
Olson blades, since they are readily available on Amazon to most of us. Thanks.
For an 1/8” blade, how are you adjusting the side bearings? The distance the blade pushes back into the back bearing, seems about to put the teeth on the side bearings. Thanks for the video, great one.
Dude, I think u are really good at education! I've been in the training world for a long time. Great stuff. Thanks a ton.
Just bought the app.
Also just watched your Mastering Accuracy (a subject near and dear to my Japanese-saw heart) and I will now be switching to the marking knife. Your vid cleared up some nagging uncertainty. Also just bought your shop apron ("where the hell did I put my D@*%n _________?!")
Thanks!
The app looks great, I am using Makita LB1200F bandsaw with stock blade. Would be great, if the App could support it. Thanks. BTW I really like this no BS series, I would love to see one about table saw, similar to this, mix of safety /settings / operation advices.
Amazing video, thank you. I just bought my first bandsaw and have been overwhelmed trying to figure out why my cut quality sucks. Question: What blade would you recommend for bandsaw boxes? Still a 1/4" blade for the curves, but lower tpi since you're creating more sawdust?
I’d go with an 1/8” 14tpi
The concept of the app is excellent. I can't wait to give it a try but I'll have to wait for the update. I attempted to purchase the app in the Google Play store and it won't let me because it was made for an older version of Android. I'll keep an eye open for the update though so I can grab it when it's available for my phone.
Same problem here for my android phone. I was interested in getting in before the price hike as I've always wondered if my tension is correct. This app would do the trick.
Hi!! I don't use the bandsaw very often, so I take the tension off when I'm done. But after a few times I can't saw straight anymore. Do I have to repeat all the steps every time??
Can you get Wood Slicer blades added to the application?
Very helpful video, great tips! How about 1/2 & 1/4” Timber Wolf blades 132” length? Great idea with the app. Stay safe.
Another great No BS video! I love watching these as I am learning so much stuff I didn’t know. Thanks Jonathan for making these!
So for us super budget bandsaw operators, how would you tune up one of those Harbor Freight bandsaws? I bought a nicer bosch blade for it, but would really like to maximize what it can do (I don't use it for a whole lot, hence why I only have a cheap-o one). Love your videos!
Lenox blades are what I buy for my shop . I’m sure there are other great blades but the company where I buy blades and knives for the molder and shapers only sells Lenox blades of all sorts.
I have a large Rikon bandsaw with a significant tracking error. Is there a way to fix this?
Johnathan, please add the Powermatic 14 inch bandsaw to your list for the app please! Thank you very much!
How about Starrett blades?
Hey Jonathan, What about those who purchased the app when Andy first introduced it? Just checking.....
What if you have an old 3 wheel delta?
Just bought the app yesterday. It was $6 but I’m still ok with that.
A suggestion from UK users - add Record Power to the manufacturer list please.
A No BS video showing how to get the most out of your cheap a$$ band saw would be good. The small Harbor Freight model, the Wen, etc. Can you get good results with them? What is the best set up and how to maintain that? Is it even worth it? I had the small hf bandsaw, I could never get anything even remotely close to straight off of it. And most likely user head space and timing, granted. Having some idea of left and right reasonable expectation performance capabilities would be nice.
I use Wood Slicer for re-sawing, please ad it