Woodworking Tricks You'll Actually Use // Helpful Woodworking Hints
Vložit
- čas přidán 22. 06. 2024
- In this video I'll show you some helpful Woodworking Tricks and Hints You'll Actually Use
Merchandise & Plans: www.bourbonmoth.com
Patreon Page: / bourbonmothwoodworking
Cameo: www.cameo.com/bourbonmoth
Links below to tools and supplies:
Sanding Block: amzn.to/2vfcf5t
Sanding Eraser: amzn.to/32hbOVr
Japanese Pull Saw: amzn.to/3d93gV9
Japanese Pull Saw: amzn.to/2SBHUGo
Japanese Pull Saw: amzn.to/3loUhBQ
Set Up Blocks: amzn.to/2PxGRFK
Drill & Driver amzn.to/2xyJPEo
Trim Router: amzn.to/3hyjbh6
Clamps: amzn.to/2OjyYUh
Square: amzn.to/2tiTPQr
Tape Measure: amzn.to/3b2rnDq
Safety Glasses: amzn.to/2RMLoGv
Festool Router: amzn.to/3cMGEcN
Festool Chop Saw: amzn.to/31fbsx0
Woodpeckers Flip Stops: amzn.to/2tdKQzM
Extruded Aluminum: amzn.to/3iRSO5Y
Table Saw Blade: amzn.to/2RJUCmI
SOtunes Bluetooth Hearing Protection (10% off code- BOURBONMOTH10) bit.ly/BourbonMoth10
Bits & Bits Precision Cutting Tools (10% off code- BOURBONBITS)
bitsbits.com/ref/6220/
RZ Mask (15% off code: BOURBONMOTH15)
www.awin1.com/cread.php?awinmi...
Total Boat Epoxy: (10% coupon code TOTALMOTH) www.totalboat.com
Nicks Handmade Boots: bit.ly/3vZ8uMR
Firm Grip Work Gloves: thd.co/3LEO5TE
PowerPro Fasteners: amzn.to/3u3Mgtj
Pony Jorgensen Clamps: bit.ly/3knr9fZ
Spec Ops Hammer: amzn.to/3fMjAOd
Spec Ops Tape Measure: amzn.to/3w1M788
Spec Ops Pry Bar: amzn.to/2Ro3iC2
Spec Ops Chisels: amzn.to/3ga8kKv
Spec Ops Screw Drivers: amzn.to/3ciV8ls
Spec ops utility Knife: amzn.to/3g5ysWZ
Grizzly Tools:
Table Saw: amzn.to/2FBGs3q
Jointer: amzn.to/3aFYSM2
Planer: amzn.to/31cZAxa
Dust Collector: amzn.to/3l4rJOQ
Air Filtration: amzn.to/32pHx6r - Jak na to + styl
I was not ready for the second glue in a crack method
I don't think anyone would be!
OMG, I laughed my Ass off!!! I really needed that laugh.
@@mnmike59 i couldn’t stop laughing
My wife gave me a wired look when I burst out laughing
Good stuff.
After watching the video advert i was still skeptical. But when i finally downloaded the plans czcams.com/users/postUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!
The man TOOK ONE FOR THE TEAM on that glue trick. Holy smokes.
That was mayo mixed with a little mustard for the yellow to tint.
Looks more like he took one FROM the team.
Thank God it wasn't a butt crack!
Best way to deal with nails in a pallet that I've have ever seen
I was able to successfully remove the nails from most of my house with your nail removal trick.
Worked great in my truck tires, too!
also works great on fingers
This is literally what they used to do back when all nails were hand forged square nails. Wood was cheap, nails werent so it was faster to burn the building and extract the nails afterwards.
Don't try this method to remove aluminum window panes, though. Now, if you excuse me, I've got a lot of aluminum I have to smelt...
Me too! 😂
I’ve never actually laughed out loud at a woodworking video but that glue scene was hilarious. Thank you!
I used to have a nurse-contact who could get me large-diameter hypodermic needles and syringes, and those worked great for getting glue into tight places, but you have to clean them out immediately after use, and very thoroughly.
after removing the nails from the pallet, do I still sand up to 220 grit?
Clean up the dust with mineral spirits first
Even the comments are funny. Gotta love it.
Back to 150 by hand if you are using Rubio to finish the nails and ash.
🤣
😆😂🤣
Best pallet wood video ever!!!
So sick and tired of being asked for tips on processing of pallets. Best response ever, I honestly took a second to realize you were not doing some flaming voodoo to get those nails out. LOL. Instant subscribe.
Deck Wrecker also works:) but I prefer fire method as well
I've been a carpenter for 20 years......and yet I STILL learn something from these videos everyday LOL
Man... these videos are amazing. It’s like your dad telling you things that would take a lifetime of experience to learn
And, he even has the dad jokes.
I watched your video twice so if I missed anything I’d catch it the 2nd time. Great job.
A lot of woodworking channels use fancy camera tricks, but I appreciate your commitment to practical effects.
When older you are, slide across bench, you won't! (Journeyman Yoda)
I have discovered you channel three days ago and now I cannot stop binge watching your videos. Your channel is awesome, i am freaking laughing my way through each one of them and learning a TON of things. This is insane. Thank you so much for your hard work and sharing your knowledge.
I also discovered your channel three days ago and now cannot stop binge watching your videos. Your channel is awesome, I am freaking laughing my way through each one of them and learning a TON of things. This is insane. Thank you so much for your hard work and sharing your knowledge.
BEST PALLET TUTORIAL EVER!!! LOL!
How have he
Hu
U
Amen. So freaking tired of people using the garbagiest wood ever for making nonsense.
I have been an amateur wood worker for over 40 years experience, Bourbon Moth Woodworking is about the best for professional results and ideas. I have taken 4 years of vocational classes, and worked as a wood mechanic when I was younger. I am so pleased I found this.
hahah i was saying when you pulled out the pallet, he going to burn it, and yep you did that is the best way too deal with those pesky pallet nails
16:50 Old skool tip for accurately measuring interior dimensions: don't measure. Instead, take two sticks that are at least half the length you need to measure, then put one stick tight to each end of the inside dimension, then pinch them together where they overlap and BOOM, perfect inside measurement. You can then clamp them together, measure them, or just scribe that distance on the board you need to cut to that length. Perfect every time.
Excellent.
Good one!, I do this with the cheap never really accurate metal yardsticks sold at the big box stores, I've cut them so i have one at every foot and 1/2 foot (under 3') and use a wet-erase marker.
Damnit I wish I could see this visually. These comment tips all seem so useful but somehow it’s so hard to grasp via text
@@cariebb7763 here’s a little video that gives you a visual. In this case they’ve made a reusable tool, but you can make one out of any scraps of wood you have lying around and just use your fingers or spring clamps to pinch it instead of the wing nuts they’ve used. Hope that helps! 👍🏻
czcams.com/video/YRpnXYfF-w8/video.html
In finding the center of wider material, like a sheet product, I'll "over measure" beyond approx. center of the plywood from both sides, measuring the distance between those two points (relatively short space) and that nearly always gives me a center point of the panel. Easy to witness quickly, like his board centering, and I'm off to the table saw lickity split to make cabinet carcass pieces/shelving.
That method for getting the nails out of pallets is gonna save me so much time. Thanks, bro.
bro. I lost it when you did glue method 2. still laughing. that's when I hit subscribe.
I literally laughed out loud. I wish there was more than a thumbs up on here.
I was laughing so hard my wife came in to see what was going on. I backed it up so she could see it, and I thought she was going to wet her pants.
Dude, you never disappoint! The pallet wood segment was golden!
Found this channel....saw the fantastic opening.....stayed for the blow in glue tutorial....subbed for life! XD.
I do find “glue in the crack” tip number two extremely useful. Whenever I’m having a bad day at work (meaning every work day) I think of that tip and it makes the day better.
Great vid! I will not be using method #2 to glue my cracks, thank you very much. The method for finding the center of a board also works for dividing a board into more equal pieces. If you want to divide a board into 3 equal pieces without fighting with crazy fractions just measure across the board like you did using a number that is easily divisible by three, say twelve, and then mark at four and eight and you have three equal pieces. I believe this method works no matter how many equal pieces you want.
When I use that method, I also make a small line along the edge of the ruler, and use the ruler-side of that line where it intersects the measurement mark. I also use a fairly-fine mechanical pencil for marking measurements that need to be precise.
I never knew option 1 for getting glue into a crack, thanks for the helpful tip, now I can finally stop doing option 2
You are an affable guy. Just enough info, tips, and comic relief. Kudos my bearded woodworker.
The glue tip number 2 had me crying 😂. You are fantastic and I love your voice xxxx Hugs from Shropshire /North Wales Borders UK xxx
These were great! Especially the second tip on how to get the glue into a crack.
I literally spit my scotch out with the pallet burning. Amen brother love this channel.
you should be more careful...thats no way to treat scotch.
Shouldn’t you be drinking bourbon, not scotch, while watching this?
@Jackman is crying right now.....
@@ericrichter7933 Mixed with Moths? No thanks!
Best use of pallets by far
i dont know what it is about your personality but you make me laugh alot and your knowledge mixed with it is so entertaining HOCKED keep it up your awesome
I regret that I have but one like to give this video. The mix of gags with actually useful information … perfection.
Instead of measuring out and adding twelve inches, I use ten inches. Much, much easier to add ten to any given measurement than twelve.
A decade or three of carpentry/construction/cabinet making/screwing up has taught me a bunch of stuff, and you are teaching me more. Keep it up!
You don't add twelve, you add ONE. One foot. Much easier than any number.
@@BariumCobaltNitrog3n Adding one foot is great, if you are measuring in feet. Adding ten inches works much better when adding in inches, such as when building cabinets or framing walls.
If I need an interior measurement of an area to install a set of cabinets that is 86 3/4" long, how much is that in feet? It is easily measured as 76 3/4" plus 10".
@@coreyg7255 That's a good point.
Omg, watching this when everyone is sleeping sunday morning. I woke up everyone laughing so loud with the second metnod for gluing cracked board hahah ! !!!
Ok blowing that glue into the crack earned you a new sub! Take a bow my friend… you went WAY above and beyond on that one! 😂😂😂😂
Loved your trick for
Removing nails in pallets
The second method of gluing caught me by surprise. I couldn’t stop laughing! I love your humor and beyond that are some really great tips that are greatly appreciated! Your woodworking advice never gets old, it’s too entertaining……and informative. Keep it up!
That was hilarious i couldn't stop laughing ether 😝😝😝
I was not expecting that. At all.
Your pallet nail removal technique was fantastic.
I am definately not a woodworker, but I find myself watching your videos, not only because you give great tips and make beautiful things, because you are so frickin funny!!!! I think I might just buy some wood!!!
That glue crack thing is pure gold. Thanks.
Wow! Ten seconds in and I know your doppleganger -- Dave Teiff -- right down to the funny, quirky personality!
Anyway, down to the important stuff. Wiping down the wood with mineral spirits also raises the grain for most woods, making sanding more efficient for the next higher grit. I used to use water, but it takes longer to dry. Also, before using the mineral spirits, a quick hand-sand with the woodgrain using the same grit you just finished with on the sander will help remove swirls that you won't see until you apply a stain or finish. "Remove as you go" works best because 220-grit paper won't do as good a job on 80- or 100-grit swirl marks later. I learned this while turning pens and the wood surface is f l a w l e s s even under 10X magnification review (yeah, for a pen maybe it's the Nth degree, but some of us are wired like that...)
As a marketing professional, I have to comment...great entrance - immediately grabs the audience, and continues with an excellent presentation. It is engaging, informative, and keeps moving. Clearly, you scripted it properly and practiced, resulting in a natural on-screen effect. The video is carefully shot with good editing, resulting in a clean, well-lit piece with very clear audio. The result is great content. Keep up the excellent work!!!
Okay - I paused the video just to comment: De-nailing the pallet tip - Absolute Gold!
Just a massive thank you for these videos. I have just started trying to learn how to do some basic woodworking (very very basic) so simple tips like the creating your own "guide" for re-drilling holes has helped me immensely. The removing nails from the pallet had me in stitches. Great stuff.
I’ve been doing woodworking for a long time and have done a lot of stuff and watching this I learned some things. Well worth watching, I have some new and better ways of doing things.
Bourbon Moth: Come for the lawnmower tank, stay for the mouthful of glue.
Cool and fun video. Appreciate the effort!!!
Yeah I analyzed it and that is definitely the same bottle the entire clip. 🤣
@@bradymiguel im pretty certain he went all in
Eating glue is how some of us got first placed into shop class.
Not me, but some of us
beats sniffing it!
I am just starting out wood working. I watched one of your videos and said “man, I think I can do at least 40% as well as you can”. So I went bought all the tools and wood. $4,000 later I am ready to work. Your tips really help out, and my neighbors come over and say man that looks average. Thanks to your tips I think some day they will say man that looks slightly above average. Thanks for the inspiration and the tips! I love you.
You can do it. Keep it up. And you will get there.
Not even sure if I like the content of the video yet...the intro was enough to push that like button!
I’m currently suffering through a kidney stone and have been down and wore out for a week now. But when I saw the tip of blowing glue into a crack, I laughed so hard I totally forgot my KS pain. When you look up with all the glue in that righteous beard of yours, that’s an image I’ll never forget! I subscribed just because of that tip, and the other great tips as well.
These tip videos are fantastic for me. I am learning quite a bit from them. Thanks for taking the time to make and share so well!
"Sandpapers flippin expensive" as he's holding a festool sander lol 😅
I was thinking the same thing!
Exactly frestool is one of the most expensive for saws and just about everything. But they are nice tools
I have a Festool sander. I use it commercially. It's 24 years old. At $5 per year I don't consider it expensive.
@@wbwylie well that makes sense if you're using a commercially or for business. But most of these videos were watching including this guys are showing you how to do things yourself and have to save money. That's the difference.
@@wbwylie so you paid 120.00 for it?? That's a good deal.
Your center-finding trick also works with splitting anything in thirds, except you use a number that is divisible by 3-like 9 or 12. Tip a ruler to 0 and 9 and mark the spot where 3 and 6 intersect and you have a perfectly divided board into thirds.
You, sir, are a magnificent clown, meant in the best way possible. I've never had as much fun learning anything as I do learning from you. As a bonus, the tips and tricks are fantastic. Thank you for your videos.
That second method had me rolling on the floor. That’s why we love your channel bud. You put humor into it. In fact I realized I wasn’t subscribed. Could of sworn I was but I changed that real quick especially after seeing how far you’ll go to entertain us. Thank you for the laugh.
I love your videos!! About the center finding method, the same procedure works for dividing into 3rd, 4th, etc. For 3rds for instance just use an overall length divisible by 3.
That entrance deserves an award.
Right!?! I nearly spewed my tea!
Workman's comp is reviewing your claim...
The entrance makes me laugh. Interesting
You watch him too. I’m a big fan of yours
Hahahaha nice roll
Dude, I'm in my shop listening to this, and I had to stop what I was doing several times to either laugh out loud, or think to myself "Oooo, that's useful". Thanks!
I will use the pallet hack to eliminate the need for sanding which also saves me money on sandpaper. Thank you Mr. CZcamsr. 👍
Thank you for the suggestion of the sanding eraser. I just ordered mine yesterday. Keep up the great work!
Dude... I'm subscribing because of that glue #2 tip. Had me cracking up
I had only watched 1 or 2 of his videos, but after the pallet burning and the #2 glue method, count me as subscribed
I am still laughing over glue trick and the video is over! I also subscribed after seeing that!
The comment about pallets is spot-on, well said.
You are by far the funniest woodworker i have seen. Great job.
OMG, you crack gluing techniques had me rolling!
An anti-glue squeeze out hack I use is I apply shellac to the surface when I dry fit the joint. It dries in a few minutes. Then do your glue-up and clamping. Shellac prevents the glue from getting into the woods pores so cleans up easily with damp cloth. No issues with glue stains when you apply finish. Not my idea, got it from Cam at Blacktail.
I just started watching your videos, When you busted out that pallet I was like oh man not one these guys… Then you made my day
Between the pallet on fire and blowing glue in a crack, I absolutely have tears in my eyes from laughing so hard.
The glue-spitting was hilarious! Thanks, good stuff.
I love the work you did with the pallet! Really top notch!! Keep up the GREAT work my friend!
This is the first time the sequel is better than the original!
The reverse drilling to start out holes blew my mind 😮 sooo helpful
Great tips, learned a bunch even though I've been woodworking for years now.
same here!
inside measurement. I cut a stick exactly 10" and measure to it and add to my measurement. 10 is an easy number in my world
Most of the world agrees with you about the simplicity of ten. Where I live we have a whole numerical system based on ten. I love it.
@@nigelmtb that's just silly.
I will still get out my 3 barley corns and put them end to end then measure to that, then I know for example, that it is 154mm plus 3 barleycorn 🤔
I love my metric tape measure.
That's exactly what I do. I have sticks exactly cut to 30, 50, 80 inches, etc. Great for precisely cutting baseboard, crown molding and such.
In my opinion, he just had a bad tape measure. Mine has a little tab i fold out at the end, so the total is exactly 10 cm. It also has a locking feature, so I just flip out the tab, run the tape measure from one end to the other, lock it, then pick it up and read it, and add 10cm 🙂
Goes exactly as fast as any other measure, and is more presice than relying on a mark.
Your comedic timing…….is well timed. Great content, thanks your your time!
Thanks for the great tips. Your mannerisms remind me of how I acted teaching my high school Physics classes before I retired. Love it !!
😂 I can’t even handle the glue part right now. Thank you for that!
That pallet trick was probably the best one I’ve seen from any DIY video in the history of CZcams
So much for these boring wood channels. Entertaining and useful! Thanks for making learning fun!
The trick at 8 mins just saved my bacon! Cheers!
Might want to try dental floss to put glue in the crack method, and can count it as #3, since you prefer to avoid #2. But it was definitely funny!😂
He may have use dental floss AFTER method #2 in order to take the glue out of his teeth
You might try dental floss to remove the glue from between your teeth. Better yet, substitute melted ice cream to take the place of glue when you'rs filming mouth squirting glue into a crack. You cracked me up with that one.
That was epic. I wondered though if he was using glue, or something like pancake batter for that one.
I lost it at method #2.
Dental floss does not always work like you would want.
I'm sure, that I wasn't the only one, who foreseen how he planned to remove the nails from the pallets... Too funny 😂
Holy Cow!!! Best teacher ever .. dedicated enough to take some glue to the face for all of us.., in case we think of it on our own
Learn something new every time I watch your video. Thank.
My uncle discovered you with this video and he says to his wife "Does this guy remind you of anybody?" She immediately sent the video to my mom" ... they say we're soul brothers. You don't know me but I'd say we've definitely got the same sarcastic enthusiasm. Yay.
I REALLY hope that was hollandaise sauce, I know wood glue is non-toxic but having a beard, I can imagine the cleanup
It has a very unpleasant taste as well. Don't ask.
@@CeeJayThe13th Depends if you were that kid in school...
@@robandtina 😉😉
I wasn't *that* type of kid in school. But I am the type you can get to do sketchy stuff on a dare or who will do weird stuff out of curiosity.
(FYI, wood glue is basically just school glue with some extra stuff in it)
Excellent video! I have watched many tips and tricks videos that pretty much are the same tricks over and over. Not the case here!! These are great.
Just wait until it dries, then use a chisel....
I love the humor and the tips. One of my favorite CZcamsrs
For glue squeeze out, I take a glass of water and a small artist paintbrush. Swish the paintbrush in the water and mop up the glue while still wet. Repeat swishing the brush in the water many times while cleaning the glue. Surprisingly, all the glue will wash off and there is no perceptible grain raising from the water. Stains great with no extra sanding and only takes seconds to do. Great video too! Totally enjoyable and informative.
I hope this tips video includes how to do a table flip as sweet as the one in that intro
LMAOOOOO!!! My wife said Wtf you laughing at so early in the morning i said this carpenter im watching is funny as shit. Awsome video.
You are absolutely awesome you're funny and you know what you're doing and you know what you're doing I enjoy watching you
That was your funniest infinitive educational video yet. I laughed my ass off and learned some new tricks. Thanks brother for another great video.
Great entrance on this one particularly (hope you're okay). Anyway for me, best hand sanding block is a flat piece of 1.5" thick (or so) scrap hardwood cut to 4.5" width for adhesive-backed sandpaper. The sandpaper rolls are cheap (compared to round disks), blocks can be cut to any size and each fitted with different grit, and you can sand right up to corners.
For hand sanding, I use Norton 3X sheet sandpaper whenever I can. For routine flat work, I use one of those 3M rubber sanding blocks that takes 1/4 sheet ripped into long strips, but I don't like 3M's adhesive-backed sandpaper because it leaves little gobs of adhesive on the block, and those compromise the flatness of it. Besides, the Norton 3X paper cuts longer and doesn't clog as quickly. For detail sanding, I wrap 1/16 of a sheet around a piece of an old credit card (cut lengthwise).
-- I spent a bunch of years restoring century-old wooden entryways for three-story apartment buildings in the Boston area and finishing them with an alkyd-based marine varnish (Sikkens Cetol Marine-- NOT the Cetol products for house siding or windows and doors). These entryways had beveled-glass sidelights and toplights, many of them arched on top. In some places the built-up mouldings had more than 25 different surfaces to be finished, and some had Corinthian 1/2 columns with carved leaves and acorns on the capitals. In some parts, it was more like re-carving than refinishing, because there was so much UV degradation that had to be scraped off. Hundreds of hours of hand work on each one. I tried a couple of different power detail-sanders, but they were useless.
-- Some of 3M's stuff is OK, but their sheet sandpaper sucks. Gator brand is OK, and some other brand from Finland I ran into, but I still stock up on Norton 3X whenever I see it.
-- Discovering the utility of old credit cards for detail sanding "blocks" was a lifesaver. I cut them into strips about 7/8" wide, avoiding any raised numbers, and wrap the 1/16 sheets around them lengthwise. They are great for sanding inside corners and other grooves. For round concave troughs, I use milk-jug plastic, cut to rectangles sized so that the 1/16 sheet can be wrapped around them crosswise. The softer plastic takes the curve well, while its edges have enough stiffness to give a clean line where the trough meets whatever bounds it.
-- The Sikkens Cetol Marine varnish was another great discovery. It lasts a lot longer than spar varnish or polyurethane (including the allegedly UV-protected polyurethane). Oily tropical woods like mahogany or teak should be wiped down with acetone or lacquer thinner just prior to the first coat, to remove the oils from the surface (for the sake of adhesion and to avoid splotchy coloration from the oils reacting with the varnish), but the manufacturers won't tell you that, what with the EPA looking over their shoulders. The Sikkens Cetol Marine stays a bit pliable and doesn't crack or crystalize, and maintenance is easy-- just wash it with TSP and a Scotchbrite pad, rinse, let dry, and recoat after a couple of years in marine environments, but 5-6 years on land seems to be OK.
-- And for restoring those nice old brass kickplates and door handles, clean it up nicely, leaving in the little dings that give it character, and coat it with automotive clear coat. SEM sells it in a spray can, and it's available at auto-body supply stores.
-- Good detail scrapers are hard to find. Craftsman used to make a "Handy Scraper / Utility Scraper" that had 6 blades that could be rotated 180 degrees, and I was lucky enough to get two of them, but they are long-since gone from the hardware shelves. The closest thing to it is the Hyde Countour Scraper 10450, but most of their blades are sharpened only on the ends, not on all edges, and three of the countours are concave, for scraping spokes and round spindles, which can be scraped with a straight blade (it's all going to get sanded, right?). The old Craftsman scraper had 4 concave blades, with radii of 1/8", 1/4", 1/2", and something around 3", and a couple of pointy pentagons, one tall and narrow, with a wide base, and the other short and wider, with a very wide base. The Hyde and the Craftsman handles will accept one another's blades, which clip on with a quick-release lever, and the blades are held at about a 15-degree angle off perpendicular to the handle. They scrape on the pull stroke. I recently had a metal fabricator with a CNC setup make some of the Craftsman style blades, because my old ones have been sharpened so much that there isn't much left of them. A higher-end set of fixed-blade (perpendicular to handle) scrapers is available at stortz.com, and I may spring for a set of them, because they're apparently made of carbon steel, not stainless, and the permanently-attached handles would make them easier to sharpen (and less often). (stortz.com also carries Klenk offset aviation metal shears, which I had years ago, and worked better than any I have seen since. No having to lift one flap above your cutting hand, a radical difference from the usual ones.)
-- Hint of the day-- When you own some special, hard-to-find tools that are much better designed than the common variety, don't lend them out, even if it's to your boss.
@@grizzlygrizzle okay, this is such a great comment - years of very specialized and detailed work condensed into a CZcams comment. So special and greatly appreciated. I can confidently say that at some point I will try almost every recommendation you make here. Thanks so much for this enlightening and informative comment. I am going to make some sawdust now…
14:50 Glue in crack method 2 got me crying! Thanks I needed that! Subscribed!You are funny dude!
Man! This guy is very informative, but funny as hell. A little weird too. LOVE IT!
Love this channel. Hilarious and informative all in one easy package.
this is the most chaotic good energy
my Insomnia says thank you for finding this 😭
Made me laugh out loud AND I learned a couple things: thanks very much.
Learnt more in this video than all the woodwork lessons in school 👍
Not only good advice, but great entertainment. You should be on Telly
Roflmbo watching was worth it just for the humor. Besides I love that eraser.
Really? It's the 'humour' that will put me off watching him at all.
i was so invested and then the second crack fill method came in and i was laughing for like 10 min and had to rewatch the video
How could any one thumbs down that video.. very funny, and great tips.
I like your method for removing nails from pallets 😂👏🏻👏🏻👏🏻