How To Crimp A JST-XH Pin | PR-3254/SN-28B Crimping Tutorial for Dupont Pins And Connectors
Vložit
- čas přidán 21. 01. 2021
- How To Use A Crimp Tool To Make Or Repair Lipo Balance Lead Plugs
Crimping Tool Kit - www.amazon.com/Crimping-Preci...
Contact Me, ScooterPie:
Propsoffohio@gmail.com
scooterpie.100
My Gear:
Fatshark HDO - pyrodrone.com/pages/search-re...
RapidFire Module - pyrodrone.com/products/immers...
Goggle Battery - www.amazon.com/GOLDBAT-5000mA...
Goggle Power Cable - www.getfpv.com/slaytech-fatsh...
Foxeer Lollipop 2 - pyrodrone.com/products/10cm-f...
Foxeer Patch - www.amazon.com/gp/product/B07...
RadiomasterTX16S - www.buddyrc.com/products/radi...
Radiomaster Nano Receiver - www.buddyrc.com/collections/r...
IDST Q6 300W Charger - www.getfpv.com/isdt-q6-pro-ba...
Charger Power Supply 24V - www.amazon.com/gp/product/B00...
Strix 4s Parallel Board - www.readymaderc.com/products/...
Taranis QX7 Transmitter - www.getfpv.com/frsky-taranis-...
M7 Hall Gimbals - www.racedayquads.com/products...
Favorite Quad - www.banggood.com/EACHINEDIATO...
Worthy Quad Kit - Skystars x120 Bolt - www.gearbest.com/brushless-fp...
Mobula6 Whoop 25K Motors - pyrodrone.com/products/happym...
Jumper T16 - graysonhobby.com/jumper-t16-p...
I had almost given up on cramping, or at least my tools.
This video really goes the extra mile (or millimeter in that case) to show every detail of the process, the lack of useless music and the calm and clear voice adds to the value. Also near perfect focus for extra clarity. Very impressed and very grateful.
I appreciate your support and encouragement. As I walk around the Museum race, day four, answering spectators' questions and weary, you have lifted my spirits...👍🏻🍻👊🏻
This has the best camera shots I've seen in a crimping video. For all the fears you voiced of getting good shots... you did amazing camera work. Thanks!
I appreciate your kind words of encouragement, thank you...👍🏻🍻👊🏻
The white connectors are JST not dupont connectors
i agree, hats off to this guy!
😊😊
Bardzo dobre video
The Bob Ross of crimping. Excellent video.
Thank you sir. I came here after watching 3 or 4 other videos and only learned to crimp from you. Regards
My pleasure.. It really means a lot to hear your feedback and encouragement...👍🏻🍻👊🏻
Quality tutorial right here - the close-up shots and the precise details walked us through every step of how to use a crimping tool. The husband and I were able to crimp a set of wires for our diode laser, saved us money and time. Thank you so much for taking the time to zoom in and explain.
My pleasure. Helping and saving money seem to be my most favorite things to do nowadays.. I appreciate your encouragement, feedback, and support...🍻
I know this is an old video, but this is the first time in my life I've been able to figure it out and make some great crimps... best explanation I've ever see of it, thank you so much!
My pleasure, I appreciate your support and kind words of encouragement...👍🏻🍻👊🏻
Best tutorial for crimping, detailed explanation with crisp, zoomed in, clear footage of tiny component. Appreciate the effort that has gone into making this.
I appreciate your kind words and encouragement. Thank you...👍🏻🍻👊🏻
Thank you! 😃 I learned more in 15 minutes than I did in 5 hours of trying all of the wrong things on my own. 😩
My pleasure. One of the most frustrating tools out there, lol...🍻
You're a life saver my guy, I wasted about ten connectors trying to figure this out myself and your video cleared everything up. Cheers,
I appreciate your feedback.. This is one of those tools that have the potential to make holes in the wall...🤣
Thank you so much for this video! I have just spent over 2 hours, watching different videos on this and got nowhere, other than burning through a load of connectors. Almost gave up, then found your video and bang, all working and every connector worked first try!
You have made my night, I appreciate your support and feedback! I too watched a few dead-end videos and felt a void that needed filled. Enjoy the Breeze...👍🏻🍻👊🏻
I second this comment!
Pretty intricately demonstrated, Best camera view. Thanks a lot.
@suminlee127
I do believe my OCD came on when filming, Lol.. I appreciate your feedback and support...👍🏻🍻👊🏻
This has to be the most helpful instruction video on crimping I've seen - really clear and close up shots, and lots of very detailed explanation. Brilliant job and really helpful :)
I appreciate your feedback and kind words of encouragement. It's my pleasure, thank you for your support...🍻
my dude needs to be voice acter for audiobooks, watch it again, and imagine him reading a western novel ( great video for info as well, thanks)
I appreciate your encouragement. I've never done a voice over, Lol. I wouldn't mind giving it a go someday...🍻
This is the only video I was able to find that thoroughly explained how do use this darn tool. Thank you so much!
You bet, happy to help. Frustrating to smash a pin when you have 8 wires all nicely lined up, lol...
You saved me £22 :)
I bought another crimping tool 5 minutes before I watch this video, and after watching your video I learned that the crimping tool that I alreay have can crimp JST-XH, tested and it is working beautifully, instantly cancelled the order... Apparently I was using it in a wrong way. Thank you very much...
That's amazing news! Saving money is the best.. Your welcome, it was my pleasure. I appreciate your support...👍🏻🍻👊🏻
Great Video. I was so nervous about crimping again after shorting out a previous pcb with my horrible skills. I saw this video and I see where all my failures were. Thank You.
My pleasure. That's awesome you got things straightened out, glad to help.. I appreciate your feedback!
I'm always making videos and explaining things multiple ways to help the most people possible...👍🏻🍻👊🏻
GREAT VIDEO!!!! I have been struggling with these connectors for a LONG time and I found i was doing it wrong all along. I had every problem you described, and a few more. You’re a lifesaver. I’ll share the video with others in our train club so we can all do it RIGHT.
🙏 thank you.
I appreciate your encouragement and support. Didn't consider all the other hobbies that use this connector type, trains are cool...👍🏻🍻👊🏻
I know this is an old video, and I don't normally comment on videos from this long ago, but I wanted to say thank you. You really helped me to figure this out. The close up shots were really what did it for me. And the mention of the adjustment wheel on the side was huge. After watching this I was crimping OK, but the crimp was so tight that any pull on the wire and it would break off. I adjusted the wheel to its lowest setting and now it crimps great. I just need about 100 crimps of practice.
I appreciate your comment. It stokes my motivation to make videos. I've been a bit burned out lately (spending a dozen hours to make a video to get 200 views). Your encouragement helps me as much as my video helps you...👍🏻🍻👊🏻
I am new to this technical world.
This video really explains everything you need to pay attention to when crimping.
Thank you.
My pleasure.. I appreciate your feedback...🍻
I've watched dozens of videos about Crimping JST , and I can say for sure that this is the best explanation of them all
Thank you
So glad to hear this. I appreciate your support and encouragement...👍🏻🍻👊🏻
Great presentation. I recently purchased a crimp tool for what was described as capable of handling 2.5mm pins, however when it arrived the "slots" were not identified as such. Your diagram allowed me to confirm what slots would work for the pins that were provided with the JST connectors I had on hand. Thanks!
My pleasure. I appreciate your feedback. I had such a fit figuring out this tool. Glad to be of assistance...🍻
Watched a bunch of these and yours is by far the most comprehensive and clear. Thank you!
My pleasure, I'm glad it helped. I appreciate your feedback...🍻
Well done. Best video for showing, explaining. I thought I knew enough about these... but still learnt something better. Leaving the connector on the strip while inserting seems so obvious but something i wasn't doing... doh!...Many thanks
I appreciate your support and feedback.. I can say, the process did not come naturally. I can't tell you how many 8-pin connectors I had to do to get it down, Lol...🍻
AWWWW MAN YOU ARE A LEGEND. Firstly, I have a rudimentary physics/electronics background, finding myself retired at 51 with time on my hands. Got into amateur radio and mega trying to wire up a DMR hotspot using a circuit board connected to a raspberry pi4. Like the comment below from simon C, I was pretty fed up and felt like launching this crimping tool and its pins, into space. I have just connected 4 in a row after 2 days of near stroke activity!!! Thank you.
You've made my morning.. I feel your pain. I smashed many connectors before getting the perfect crimp. Enjoy your retirement...👍🏻🍻👊🏻
@@propsoff Please never underestimate the life line, video's of your quality represent. People like you and your content just make CZcams. So, from Bournemouth UK....MAGIC!
It worked! Thank you for showing it up close and explaining how the shape of the front and pin relate to how it locks in place. Hopefully I've finally got the hang of it and no magic smoke will ever escape again!
My pleasure, glad this helped! Enjoy the freedom of making perfect length cables...👍🏻🍻👊🏻
This is, hands down, the best video on the subject. I’ve spent the past month watching videos and trying but only today, after yours, did I get my first successful crimp.
I appreciate your feedback and encouragement. It's great to hear this video helped you...👍🏻🍻👊🏻
Thank you 🙌🙌 I've been searching online for someone to explain an show clearly how it's done and this is hands down the best. Great video/instructions 👍😀
I really appreciate your kind words of encouragement. I'm glad this was helpful...👍🏻🍻👊🏻
great tutorial, you literaly saved my new lipo that I shorted when I plugged it incorrectly into "2x3s to 6s" balance adapter and one pin melted from the short ;o]
after 2 failed attempts to crimp I decided to watch some tutorial and glad I found this one as you only have about 3-4 tries before you run out of the cable ;o]
these are a real PITA to crimp (especially if you don't know what to look for and be sure to avoid)
on 1st attemp I inserted the cable too far
on 2nd attempt I used my magnifying led lamp to check from the other side that I am inserting it just enought but I used the second crimp hole which is too wide so it crashed the end and was not able to lift the securing pin anymore
finally on the 3rd attempt after watching your video and using the first hole and making sure to not crimp the end of the connector I made a perfect crimp
Heck yeah! So satisfying to fix things. I'm glad my video helped. Your definitely right, only so many attempts to fix a balance plug wire before having to cut into it. I appreciate your feedback and support...👍🏻🍻👊🏻
Absolutely the best instructional crimping vid I’ve seen! THX!
Gee wiz, thank you very much...👍🏻🍻👊🏻
Thanks for the clear explanation. It's one part of wiring I never got into. Wouldn't mind giving it a shot now.
I needed a pile of 3s,4s, and 5s extensions for projects I was doing and the videos I found were hard to understand. Or the camera angle was so bad I couldn't see how the pin fit. The instructions from manufacturers are a JOKE!.. Lol... I'm happy this video gives you a boost of confidence. I just couldn't see paying for so many extensions and not even having them be the correct length. Thank you for your kind feedback. Enjoy the Breeze...👍🏻🍻👊🏻
Absolute Professionell Explanation. After scraping 10 Headers, it took me just this Video, to get to know the Points to look after.
I appreciate your support and feedback. It makes my day knowing this is helping...🍻
Hello Everyone! Thank you for checking out my channel and subscribing! Here we take a close look at using a crimping tool to repair or extend a lipo balance lead.. Hope this helps someone.. Enjoy the Breeze...👍🏻🍻👊🏻
Thank you, I watched several videos on how to use these crimpers and this is by far the best one. There's some pretty hurtin' unit videos out there on how not to use this crimper and you did it the right way. Thank you.
I appreciate your feedback and support. I get frustrated when I waste time searching videos. Even more so when they lead me nowhere..
I'm glad it helped...👍🏻🍻👊🏻
I was about to give up but then i found this video. Thank you so much!
I'm very happy your on track and making them work. The frustration is real, Lol.. I appreciate your support and feedback...🍻
I just received my crimp tool and try many way's but without success until I watch your video and now it works very well. Thanks very much for your excellent explanation, now I can use my crimp tool.
Your feedback inspires me to keep making videos. It's an unfriendly tool until you get the hang of it... I appreciate your support...🍻
Liked and subscribed. As others have said, hands down best jst crimping video on this platform. The fantastic shots, and detailed explanations are much appreciated. You have a very calm and soothing voice to boot. Thank you for transferring your knowledge and skills, you are what makes CZcams great.
Wow! I really appreciate your kind words of encouragement and feedback. Also, welcome to the PropsOff family!!
Enjoy the Breeze...👍🏻🍻👊🏻
This video should be placed at the top when someone search "how to crimp JST". Looked at it once, first time crimping and I cannot stop, all crimps are just perfect. Thank you very much for this video!!!, it surely took you a lot of time to record it properly.
I appreciate your feedback and encouraging words.. I tried hard to film it close..
Haha! I watched so many terrible videos and continued to destroy pins or poke holes in my fingers, till I got it just right... I thought, good thing to make a video of, hopefully making other lives easier..👍🏻🍻👊🏻
Hah, I've been using this tool for months and never realized you could crimp with the pin still on the metal stripping, I've always snapped them off, positioned them, and then crimped! *redfaced...)
However now doing it this way, I have one peice of advice to add. once the strip is in the tool and you're just about ready to crimp, instead of eyeballing how far the wire slides in, position it in place in the NEXT pin over, just outside the tool where it's clearly visible. pinch right at the entry point with your fingernails, and now you have the perfect depth marked-and-ready at your fingertips!
Great advice.. I appreciate your feedback...🍻
Thank you. Finally a video that really shows how to crimp. Thankfully this is helpful
My pleasure.. This tool was very frustrating and nearly ended up being scrap metal...🤣
Awesome man! Thanks so much for sharing this! Nice and clear and close up. I watched a few of your vids tonight. Great content.
Thank you for the encouragement, I appreciate it very much...👍🏻🍻👊🏻
This is the best ever video Ive come across so far about how to crimp the JST-XH connector. You've taken a lot of trouble to cover every little minute detail regarding the do's and don'ts of crimping. Helped me a lot. Thanks a bunch ! Really appreciate all the effort you have put in.
I appreciate your support and feedback. Your kind words of encouragement has made my morning, and made the hours of filming and editing so worth it. Have a great day...👍🏻🍻👊🏻
@@propsoff Glad to hear that. The least I can do is subscribe to your channel for a job well done. You too have a wonderful day !
This was a life saver!! Thank you and really loved the close ups!
I appreciate your encouragement and support. The closeups are so necessary because these pins get destroyed so easy. It's frustrating to have to redo it after the harness is all one length and looking sweet, can't have a short one and 7 long ones, lol.. OCD...🤣
Great video !! did my first connector following your tips and worked as expected!
I appreciate your feedback. I'm glad it helped...👍🏻🍻👊🏻
Thank God for you. I have had a terrible time finding a good video
I appreciate your feedback and support...👍🏻🍻👊🏻
excellent job! close ups were very well done.. going to make my job a hella lot easier.. thumbs up!
I appreciate your feedback and support. I've made so many connectors now, this tool and kit has paid for itself many times over...🍻
Really glad I found this video have just ordered the exact same tool and connectors Thanks.
I'm glad it was helpful. I used to purchase finished balance leads and they were never long enough or too long. Nice to custom make them.. Enjoy the Breeze...👍🏻🍻👊🏻
Thanks. I really needed that demo - i was at the point if returning the crimper - great cameRa work too
I appreciate your feedback and encouragement. It really is frustrating till you get it. The instructions that come with the tool is complete garbage.
Absolutely fantastic and thorough guide. Thank you so much
My pleasure...👍🏻🍻👊🏻
That was awesome. You did an awesome job of filming that I really appreciate it. I needed that help.
My pleasure, I appreciate your encouragement...🍻
Very Helpful!! Very clear camera and voice.
I appreciate your support and encouragement...🍻
Great in focus close up shots. I have struggled with this and now get fewer messed up crimps after realizing the importance of the little hook and the box. Also pushing the wire into the connector too far interferes with pushing the connector to the mating connector. My crimp tool came with a little instruction booklet that had some good diagrams showing proper usage. It takes some practice and steady hands. Thanks.
I appreciate your feedback. I'm glad it helped. A while back I was buying connectors pre-wired and was tiresome by the expense, I needed a better solution. The videos of this tool, well, frankly sucked...lol
very good close up camera work, thanks!
Your feedback is appreciated...👍🏻🍻👊🏻
Great video, the explination was concise and informative, and as a total noob at this, it gave me confidence to try it myself, Brilloiant.
My pleasure.. I appreciate you taking the time to let me know and your encouragement...👍🏻🍻👊🏻
Excellent video showing the technique. Thanks very much !
I appreciate your feedback. I'm glad it helped...🍻
Awesome tutorial clear precise and easy to understand !!
I appreciate your feedback and encouragement...👍🏻🍻👊🏻
Such a nice and detailed video! Well done! 👍
I appreciate your feedback. A tip of my hat to ya kind sir...🍻
The video I immediately knew I needed. Thanks, pal
Your welcome, glad it was helpful...👍🏻🍻👊🏻
Thanks, finally got it! Great Video!
I appreciate your support and feedback...👍🏻🍻👊🏻
I have thought about buying a crimping tool and kit but I ended up buying precrimped jst 1.0 and 1.25 kits. But I can see where this can be handy because you save money & use different gage wires of your choice. Thanks man.
Exactly.. I have made a stack of balance lead extensions and this tool plus kit has already paid for itself.. I will admit, it's tedious though.. Thanks for checking it out...👍🏻🍻👊🏻
Don’t worry about camera clearness. You did excellent explaining all the points on crimping connectors. I am a rank amateur as I need to learn this but don’t have the tools yet. I wish I could have given you 5 stars ⭐️⭐️⭐️⭐️⭐️
@@bruceyoung1343
I appreciate your encouragement and feedback. Your on to something, star ratings would be very useful...🍻
@@propsoff right now I’m researching 2mm jst kits and ratchet crumpers.
@@bruceyoung1343
I had a few of these crimping tools and this kit was perfect for balance-plugs. I built a charging station and needed many independent connectors (male and female). Been a good kit for me.. I do not have a 2mm specific kit though.
@@propsoff I have a Coolmoon controller with 2mm pin spacing. Do I have to get a specific crumpet for 2mm?
@@bruceyoung1343
Just the dyes
This was exactly what I needed thank you so much.
Your welcome.. I appreciate your feedback, and I'm glad it helped...🍻
Great detailed tutorial, thank you.
I appreciate your feedback.. Thank you...👍🏻🍻👊🏻
The width in the jaws is merely measurement, it is not referred to the pitch of the connector. So (XH) 2.54 is actually the space between pins of this type of connection. Also, pay attention when seller declares that its compatible both jst and dupont: they should have different width, like you could see on this tool (a wider jaw part)
Also, despite the Chinese clone vendors calling it “XH 2.54”, XH actually has a pitch of 2.50mm.
Top ! Best instruction ever massive thanks , subbed
Your kind words of encouragement has made my day, thank you for that! Welcome to the PropsOff family...👍🏻🍻👊🏻
Very well described - I can finally make good crimps!
Heck yeah.. I appreciate your feedback...🍻
Thanks for the video. Its about 2mm of insulation that needs to be taken off the tip of the insulated wire and the inner conductor core wires should not be twisted as it makes it difficult for the JST XH inner pin broad middle wings to curve around the individual strands of the inner core and hold on to it.
Interesting point. makes sense.
BTW arun., what do you think about all gubments drawing a line around you(Antarctic Treaty) and saying you are not allowed to leave? If you don't know what I mean, read my about tab.
I needed this guide. Thank you!
I appreciate your feedback and support...👍🏻🍻👊🏻
Thanks man!!! Excellent job good detail!
I appreciate your feedback...👍🏻🍻👊🏻
Thank you, I’ve learnt something today
Lol, I appreciate your support...👍🏻🍻👊🏻
Awesome video, just ordered a tool through your link, thank you 🙏
I appreciate your feedback and support.. It's still working great and so, so much nicer to make it on the spot, rather than waiting for a pre-made cable...👍🏻🍻👊🏻
Wow very helpful As aways Your the go to guy for sure Thanks again 💪💪
Excellent! I thought that was it...🍻
Excellent detailed video!!!!!
I appreciate your kind words...👍🏻🍻👊🏻
Thanks bud you helped me a ton. Great video.
I appreciate your encouragement and feedback. Glad it helped...👍🏻🍻👊🏻
Thank you! Nicely done 🎉
My pleasure.. I appreciate your support and feedback...👍🏻🍻👊🏻
Super helpful. Thanks!
My pleasure.. I appreciate your feedback...👍🏻🍻👊🏻
Thanks for this video, great close up shows me I have wrong teeth on my crimper
My pleasure, glad this helped identify your issue. Just curious, did the manufacturer send it with the wrong size?
@@propsoff wrong teeth type
Mehn, you really took the time to zoom in and focus on to such a small part. Good job ... i learned a lot.
I appreciate your kind words of encouragement. It was so frustrating to have to redo it, especially when all the wires were pre-cut to the same length.
@@propsoff i see, but good job on this thorough tutorial video youve made. You made everything easier to understand. Kudos to you from the philippines.
Super good video, thank you!
@@chrisdonica3173
My pleasure, I appreciate your support and feedback...👍🏻🍻👊🏻
Thanks for this. It was a big help
My pleasure...👍🏻🍻👊🏻
That was very helpful. Thank you.
I appreciate your feedback...👍🏻🍻👊🏻
fantastic video. thank you
My pleasure.. I appreciate your support and feedback...👍🏻🍻👊🏻
Great tutorial, many thanks
I appreciate the feedback. Enjoy the Breeze...👍🏻🍻👊🏻
Thank you, stopped me trashing my workshop in a fit of rage!
Lol, I can completely relate.. My drywall was on standby 4shO...🤣
Thanks I needed this video ordering tool now to repair my battery
This is a very convenient tool to have on hand...🍻
Nice Vid. Thanx a zillion !
I appreciate your support...👍🏻🍻👊🏻
Now i know how to do it, good job 👍👍👍
I appreciate your encouragement...👍🏻🍻👊🏻
Bardzo dobre video,pozdrawiam
My first mistake was cramping the entire metal. FYI, there is also a leveler between the handle if you need to release the jaw before it is fully closed.
🍻
Great, thank you!
My pleasure. I appreciate your feedback...🍻
Thanks, big help 👍
I appreciate your support and feedback...👍🏻🍻👊🏻
excellent video
I appreciate it...🍻
great video! i noticed my crimping tool has jaws TWICE as wide for some reason, making it impossible to get a correct crimp, but lowering the tension on it has improved my crimping allot, might need to lower it even more tbh...
I appreciate your support. Out of all the hand tools I have, this crimper takes the cake for being the most frustrating. After 100s of pins, I'm finally getting faster, lol...🍻
You just saved me throwing my crimping tool out of the window, thank you.
Saving one tool at a time...🤣🍻
Thank you so much!!!
My pleasure...👍🏻🍻👊🏻
Great! Thank you, all you need to know...
My pleasure, glad it helped.. I appreciate your feedback...🍻
Thank you very much!
My pleasure, have a wonderful day...👍🏻🍻👊🏻
Thanks so much for sharing..
Happy to help. The first time using a crimp tool very similar, nearly ruined all my drywall...🤣
nice in detail video.
I appreciate your feedback and support...🍻
Thank you!
My pleasure...🍻
thank you so much!
My pleasure...🍻