Replacing the clutch on a Massey Ferguson 35 Diesel Tractor.
Vložit
- čas přidán 11. 02. 2024
- In this episode I split the tractor in half to replace the clutch plate #mechanical #tractor #diesel #restoration #masseyferguson #farmequipment #mechanic
- Auta a dopravní prostředky
Steve that clutch is adjusted right. When your slashing put the pedal halfway down to stop the pto or all the way down to stop the pto and the forward travel. It's a 2-stage clutch unlike the grey Fergy single. stage which when you pushed the clutch down the pto and forward travel stopped. Those 35 are the best tractor ever built. Thanks for great videos.
Actually.. you press the clutch half way,, allowing gear or direction change.. but pto remains spinning.. clutch fully depressed stops drive to the pto and gearbox
Massey Ferguson the best tractor better I would say than John expensive
@@golfy808 Thanks for correcting me. You are right. Was past my bedtime when i wrote that comment.
I really don’t understand how you don’t have 100,000 subscribers, I love your content and your snarky comments but then again, I’ve been a mechanical repair guy for over 50 years!
Hi Steve. I’m not sure mate. Subscribers just seemed to have stopped for some reason
I agree, great channel!
Help me share it and grow it fellas. It would be much appreciated. Even though you have been for a long time😅😅. A lot of effort goes in behind the scenes that isn’t seen on here but certainly not complaining. I enjoy it regardless of the result
Alreet Marra,
Bloody hell, that clutch gave it's last ounce of loyalty. I'm suprised it worked at all!.
A tractor splitting rail is definitely to go.
Great news, I've released the hostage from customs.
Cheers for sending it out.👍🏻
The quality and fit are mint.👌🏻
🤞🏻The channel kinetic energy spools back up.
Hi mate. Yes it was rooted but still working ok for some reason. I will probably make a rail one day. I got a few measurements off the last one I used.
I’m glad you liked it and that it fits. That’s some exquisite gear right there.
Thanks as always mate
Matty's Workshop sent me here 👍
Looking forward to a binge watch of your channel 😎
Hi Paul thanks for coming over for a look mate and hopefully you enjoy the episodes.
Awesome vid', Steve! It's always good when you find the definitive reason for something, even better when it's a (relatively) cheap fix!! Thanks for sharing 🙂
Hi Pete. I’m happy with how it turned out mate and it’s still going fine now. I’ve actually just had to do the head gasket on it too. That’s another video to come. My pleasure and talk soon
greetings from North Carolina USA Steve,hope all is going well....its alive...lol...another good show,thanks for sharing
Greetings over there Robert thank you mate. Yes we all going well here and hope you are also.
Matty's Workshop sent me. We have Masseys in Canada.
Gday Doug. Thanks for having a look mate. I can’t thank Matty enough.
Massey are a great tractor. I have a few here, they are old but still do the job mate. I’m sure they are nearly world wide
nice one there just popped over for a look and have now subscribed by way Matty from Matty's workshop recommended you in his last video glad he did Cheers
Hi mate I can’t thank him enough for the shoutout and more subs. It’s just magnificent. I’m glad you came over and that you liked it. There’s plenty to go back through if your into this sort of content. Thanks again mate
Gday Steve, splitting the tractor is the easy bit but putting them together is as easy normally and I’m buggered if I know how it was still driving when the clutch plate fell to bits, I didn’t think the price for the new plate wasn’t to bad from Lance, great video mate, cheers
Gday Matty. Yes it was still driving and working okay. Didn’t feel great but it never has. I was surprised to see it as bad as it was. I was expecting it to be rusty but not rooted. The price was a lot better than the complete kit.
"As close as rooted as shit is to swearing". PMSL, not one I'd heard of before. Australians, like us Poms, do like a choice phrase or two. The first motor vehicle I ever drove (at the princely age of 13) was a Fergie 35 on a farm in Cornwall (I believe it ran on something called TVO). The 35 (successor to the grey Fergie) is a brilliant bit of kit, even today.
Thanks for watching mate. Yes I like those sayings😂. Those Fergies are great even today like you say. It’s a great little machine to use
Had a MF35 and 65 The 65 just traveled everywhere I mean the steering !😊
Hi mate. They both good tractors. I know what you mean about the 65. My uncle had one and it was the same
Makes you wonder if the rivets of the driven plate were just biting on the pieces left adhered to the flywheel! Amazing it didn’t let you down in the paddock
It must have been mate and was doing it for a long time too. It’s always felt a bit funny but always worked
Thx for another great vid
My pleasure mate thank you
G'day Steve. We don't care in what order you put them out mate, we love watching them all cobber. Ripper again as usual. 🤠
Thanks Daryl. This was on November mate after the honeymoon so a while back now. It wasn’t planned, just something I had to do so I was filming it. It turned out ok. Hope you are both well there mate and thanks again
All good this end cobber. Thanks Steve.🤠 @@stevesplacedownunder
Evening Steve, can’t wait to see what this year brings for you in terms of growing the channel/hopefully you going full time as per that video you did late last year. Keep it up regardless of whatever CZcams is doing. Bruce
Hi Bruce. This just came through as I’m watching your ACCO video. My channel hasn’t really taken back off since I stopped for that month when I got married. It’s still going ok though and still very much enjoying it. But it’s not an easy game. Yours is flying along mate. You’re certainly growing it very nicely. Well done mate. I will send you an email.
@@stevesplacedownunderok thank you Steve, yes I have an email address in my profile now 😅
my old grey fergie would try to start itself also if it was raining lol, l would never leave it in gear and disconnect the battery it was a petrol one
Hi mate yeah this must of had moisture somewhere to make it happen. It’s not as uncommon as people may think
Awesome morning brother and sister from another country that looks like a tedious job but very interesting !!! I've only replaced 1 clutch in a tractor by myself it was difficult but got it finished dont think I want to tackle it again by myself 😂😂😂😂😂😂 yall have an awesome day brother and sister see yall next adventure 😂😂
It’s not a bad job mate but lining it back up is the hardest part. Especially when I only lined the clutch up by eye
Hi Steve nice to see i cheap fix I would have done the same mate 👍
Hi Nick. If it was my only tractor I would have done the lot but it’s not and there’s money to spend on the others also. But at the same time it’s fixed properly and not just patched up.
Hey steve, would it help to paint or powder coat some of those pieces. Anyway good you only had to spend 100 on the friction disk. I have a bad front axle on one of my plow trucks. Hope I can get through the winter before replacing it. Great video mate. Jim
Hi Jim. It probably would mate yes but I try to fit everything into the small amount of time that I have. If it was my only one then I probably may have done something like that.
Hope your truck lasts yes and that you can repair it cheap enough. All the best Jim
Great film, for me from Central Europe. You're great at showing everything. Thanks for replying to the email. I Request for another reply. Let me know when the hats are available.🙂
Nice mate keep Up still working on RC nitro s
will you show us the bikes in the shed behind you in the start of this video please.
Yeah I will in a future episode
Should be a stop to adjust for PTO to engage. Normally on the floor board.
Thank you mate I will have a lookout for it
Just subb'ed
Hi mate thank you. Stay tuned for plenty more
Look at laser welder cleaner cutter the way forward.Ultra sonic 30 litre cleaner.Is what it is is the new 24/7.Add things like it fits like a stocking on a chickens lips .Also no real nicknames today old days thought was given to nicknames
Hi Steve Bare co is at Ingleburn if you need to buy local
Thanks Neil. There is a dealer in Penrith too that I use. We use them for work and they deliver if need be
Nuda good one Steve
Thank you Ron
Have channel Alex nitro boy