PRP SHREDDY STEERING WHEEL (Install)
Vložit
- čas přidán 3. 12. 2021
- A quick install video of how to remove the factory steering wheel and install the quick disconnect and PRP Shreddy edition steering wheel on the wrangler! I absolutely love this set up and if you are looking for the parts to do this to your rig the links are below.
Quick Disconnect:
genright.com/products/jeep-tj...
Shreddy Steering Wheel:
www.prpseats.com/product/prp-...
Push-To-Talk Bracket:
www.prpseats.com/product/push...
If you want to stay more up to date with us head over to our Instagram page here / jeepfamoverland
By no means am I responsible for any injury, legal or other problems caused by what you do to your vehicle so check your state laws and check with your insurance company on modifications you want to do to your vehicle
Still good watching even after a year. Happy trails Fam
What u know about TONY’S tech talk
I love tech talks with Tony Pellegrino. We met him and his wife and everyone else at KOH last February and we will be back out there again this upcoming year for KOH again
Great video. I Just installed my wheel. Still waiting for my push to talk plate to come in. I’d like to see which buttons you used and how you wired them. Thanks!
I used everything from Rugged Radios for my buttons and wiring them to my controllers
Daaaamn shreddy glak glak jeep 😆
Just wait until you see the new seats and harnesses lol
if you don't have a steering wheel puller just loosen the main bolt half way and wiggle the steering wheel side to side till its lose, then unscrew the bolt completely
If that works then yeah but for mine it wasn't going to happen unfortunately because it took a lot even with the puller and I tried that before I got my puller out.
Your link to the genright adapter goes to one listed for the TJ. Does that still work on the Jk?
Yup it is the same one for the JK and JKU
@@jeepfamoverland what did you do for the airbag wiring? Do you have lights on the dash now?
@Jason Waren The wiring is no longer there and there are lights on the dash
How does it affect the steering wheel placement. Is it closer or further from the dash?
Slightly further from the dash but not by much
Can you post a link to the adapter? A
genright.com/products/jeep-tj-lj-quick-disconnect-steering-wheel-hub-adapter-kit.html
Which 2 jaw puller did you use?
Just one from the local parts store they didn't have a small one so I used the large size one and it was a bear to get into place because the openings were smaller than the jaws
@@jeepfamoverland thanks I ended up using a 3 jaw puller to get the job done
Hey bro would this work for my 08 Jeep?
Yes it would but don't forget with this system you will no longer have a clock spring which means no horn or airbags
@@jeepfamoverland would I keep turn signal
@@johnathanlopez4012 yes the turn signals will still be usable
@@jeepfamoverland thanks sooo much
@@johnathanlopez4012 no problem