Car Check: 2WD Modified Class | PN West Coast Regionals 2023 |
Vložit
- čas přidán 12. 09. 2023
- This car was really good on that race weekend. I came in the following positions: A1 - 2nd, A2 - 1st, A3 - 2nd. Came in 2nd Place for the West Coast PN Regionals. I'm just not used to 3 days of racing, it was a bit too much for me. Anyway, please see specs below.
RX28 SE (Gen1)
RR Bumper
GL Racing Green Springs (front)
Slight Toe out
.5mm caster shim
PN Rims19.5mm with .5mm offset (front)
PN Tires KS1038 - scuffed via PN v3 tire truer (glued)
Reflex Racing Rims 20mm with +3 offset (rear)
Marka Radial 15's (glued)
5g weight under RX and ESC
ESC is GL Racing - Blinky mode
Pink top shock spring with .5mm droop
Black side springs
13T/53T gearing (best with 12T)
Kyosho Diff with Carbide balls
GL Racing 5500kv (tested at 5900kv)
Ride Height: 1.7mm front | 1.5mm rear
Fast Eddies Ceramic Bearings (stock with grease)
Mako body
No play in the rear end of the car.
Average play in the front of the car.
I like this. I may steal it when I get into mod class.
Thanks again for this helpfull video Tj! Regards Danny
Thank you for putting out these videos.
I like to keep about the same amount of play in the front end as you. When the front end has too little play, I feel it gets really darty as well.
Hi Tjay!