arduino cannot get sync || avrdude: stk500_getsync(): not in sync: resp=0x00 error Solved
Vložit
- čas přidán 5. 09. 2024
- zip password - subham123@
link -
steps -
1. Disconnect your Arduino from Power and USB.
2. Put a Link on the ICSP1 and short pins 5-6.
3. Connect USB cable.
4. Remove the ICSP1 5-6 Link.
5. Start FLIP software. Go to: Start All \\Programs \\ Flip \\ Flip.
6. Go to: Settings \\ Communication \\ USB.
7. Click to Open.
8. Go to: File \\ Load HEX file. Select this file
9. Press Run.
10. Disconnect USB cable and connect it again.
11. Go to Device manager Win+Pause \\ Hardware \\ Device manager and check if the driver was loaded correctly. You should see it under Ports \\ Arduino Uno
12. Great! We can now test a Blink example. Start Arduino software Start \\ Arduino.
13. Click on the “Open” icon arrow Up \\ 01.Basics \\ Blink.
14. Select COM Port: Tools \\ Serial Port \\ COM select the port where the board was recognized.
15. Click to “Upload” icon arrow Right.
16. The user LED should start blinking
bro,can u provide me that software?
the file link is updated you can download it from there
@@ElectroSpecies can u say me password?
@@ElectroSpecies the file is no available
There is not porccesor menu under tools bar. How can I fix it?
I cant have a connection to this flip sw In device manager I See arduino com port but this sw cant detect UNO .. any reason ?
Description link not working
its says AtlibusbDfu.dll not found i followed all the steps pls help(your arduino and my Arduino same)
If u have any problem with the rar file download then comment down below
Plz send the link of the software
what is the password of winrar
Please give the hex file link, the link given on the description isn't working
Bro.. ATmega328p. Device is not found in device selection
I think u need to burn bootloader in the atmega 328p if u have another Arduino then please go through my first video on this channel ... Or otherwise I will upload a tutorial how to use Arduino atmega 16 as a atmega 32 programmer a day after tomorrow
same problem. did you find a way ? thanks. Peace
@@jeremyuzan1169 go through my first video how to burn bootloader in atmega 328 p
@@ElectroSpecies Thank you very much. I bought a .... "Fake" atmega 328p that was the reason. Amazon is selling not working atmega
@@jeremyuzan1169 ya I can understand this is also happen to me then I choose digikey to buy stuff 👍🏻
Why I couldn't open the USB device in Atmel flip, and the cable symbol on the top left corner is in grey colour not black and yours is black
Try to installation of the driver for atmel flip
@@ElectroSpecies how can I do that
www.avrfreaks.net/forum/installing-flip-windows10
Go through the link
Where are these pins in the uno r3 smd version? Pls tell
I guess your arduino is a chineese clone with the CH340G chip. That chip doesn't have these pins.
@@frozen_mitko Yeah I got to know after a while...
I got it replaced.
BTW thanks.
stuck in 1:10 cant connect to usb
Connect the ISP pin 5 and 6 and then disconnected it .. if still not happening anything there is a forlder in the zip files named driver .. please try to install the driver and try again
Bro for arduino mega 2560 how can i do, please give a clear explanation please
Soon I will upload a tutorial on this
is that work for you guys??
try it after installing the driver properly
The file is not available
atlibusbfafu.dll not found
Help, AtlibUsbdfu.dll not found
Try to install from official website
Plz provide me a zoom in photograph of the icsp pins
The ISP pin 5 &6
Do it works with arduino nano?
Bro, I can't find both atmel flip and hex files link's in description, can you give me the links by reply to my comment. Pardon my mistake. Thank you😁
Comment down your e-mail id I will forward it to you.
or
here is another working link - www.mediafire.com/file/36udvun84k2c9fm/file
@@ElectroSpecies hafizjdt48@gmail.com
This is my email thanks
@@hafizhafizi351 if u recived the email then please commment down below and subscribe my channel and keep supporting bro thanks in advance
@@ElectroSpecies Can you foward it to me too, muhammadhanis7300@gmail.com
file not found
ICSP1 not res plase help
step 5 , I cant have a connection to this flip sw.. In device manager I See arduino COMport but this sw cant detect UNO .. any reason ?
May be some hardware issue
Bro did u connect the faulty arduino to another arduino
Nope .. I just re-upload the farmware ..
thank you very much bro
I don't understand wiring at 1:28
www.google.com/search?q=isp+pin+5+and+6+connection+Arduino&client=ms-android-huawei-rev1&prmd=isvn&sxsrf=ALeKk01c_UvnB-wgYRa7IHzdExAqTmVxVA:1608122492796&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjZl8CPw9LtAhXizDgGHZZGAFwQ_AUoAXoECA0QAQ&biw=424&bih=783#imgrc=xG66iqfOG1bDfM
In the link there is details about the pins of Arduino and in the video on that section I just simply connect and disconnect the isp pins 5 & 6 in the Arduino board 🙏
Hope you understand
Can u help
did not work for me - can´t find usb device
arduino nano is it suitable?
No my dear brother ,, casuse it uses ftdi programmin chip to program
May be in your case the connector pin is loose ।। Retry it after fix it ,, or other wise please cheak the bootloader of the main chip ,,, or may be replace the ftdi chip also helpful in your case
@@ElectroSpecies astk500_recv() programmer is not responding..somehow I could not solve.
you could have selected processer with old bootloader
It works ony for ayduino uno .. not for the nano .. in nano may be the ftdi chip or the usb connector is broken
I dont find this setting in IDE , can you tell how can I get it
sir the password is incorrect
subham123@ or Subham123@ one of them is correct
Thanks sir
@@ElectroSpecies passwords are not working
still not uploading
May be there is some hardware issue please recheak the board
RAR FILE EROR
Password Subham123@ unzip useing winrar
❤
Downvoting for refreshing the desktop
What the heck
And also send the link of the software soon
The link is in the description
link :- www.mediafire.com/file/36udvun84k2c9fm/file
Bro, Share that software please
It's already in the given zip file under video description
Gracias bro me solucionsstee
😅 I can't get you dear