Hello sir! Huge thanks to you. It's 3am here and I am having exhibition of my Arduino project in 8am morning, I was frustrated as hell. Lost all hopes and went off to bed. Then I saw your video and came to know that 0 and 1 are serial port pins and they didn't allow my program to update. I got up and tried and succeeded. You helped me like a miracle, will never forget this moment. Thank u so much for posting this video! 😇
THANK YOU! My PORTS were all connecting blutooth. So I turned it off and re-opened the program to get my USB port to recognize my UNO. It finally uploaded that damn blinking sketch after 2 days. I am very green at this and your video was extremely helpful!
Sir Thank you a lot! I just wanted to learn something on my own and if I would have failed in just starting the ARDUINO UNO my confidence would be lost before going any further and I would have thought I can't do this !! THANK YOU ALOT!! GOD GIVE YOU LOT OF SUCCESS IN THE FUTURE!! I AM SUBSCRIBED!! (problem was drivers )
Thank you so much. I use Uno with Labview for Bluetooth communication program. So I used Tx and Rx pins. That was the problem! I unplugged Arduino's 0 &1 pins and it's done!
I struggled with esp for along time until I started using python. I would seriously recommend doing all ESP projects with python. It’s fast, clean and so much easier to work with.
hey dude you're the best, i did a stupid mistake by using a charging cable and i did everything from installing the drivers all of them even the ones that my board is not concerned with, but it was the DAMN cable.
Eu tive um problema de comunicação com o meu Arduino, após vários meses de funcionamento sem problemas, resolveu dar um problema de comunicação com a Porta COM CH340. Depois de muito verificar e tudo estava bem, cheguei á conclusão que tinha sido uma atualização do windows que atualizou os drivers CH340. A única maneira de resolver, é ir à respetiva porta e reverter para os drivers anteriores. Espero que ajude.
In my case I am getting Sketch used 3796 of program storage space.maximum is 32256 bytes global variables use 190 byte of dynamic memory leaving 1858 byte for local variable.
Hello sir,I saw your video but instead of getting com3 i'm getting com7,and doing the steps u said its still not working..please tell something..thanks
I am using mega 2560 with python using pyfirmata Since i made communication with my program i was using it through its port no ttyACM0 ( i can see it by its ide installed in my pc) with board selected as Arduino mega 2560 nd all was working fine But from last two days suddenly and automatically it changes its port no continuosly Means lets say currently the Port no is ttyACM0... Now if i do power on and off then i try to connect it then it shows errror in communication Then if i check it then it showing that its port no is ttyACM1 now Similarly next time ttyACM2 and so on May i know why this is happening? Any idea?
hello sir, i have a case.... arduino uno: "error connecting to the avr! retrying in 10s (no response from the board: list index out of range, please check the connection, port setting or reset the avr)" how is the solution ..... Thanks
hey pls help i have this arduino uno, it always error when uploading, i check everything on the software and everything was right. but my arduino LED always blinking even though i reset it. is this one of the problem that might be the cause i can't upload?
i have two arduinos and two cables one of the arduinos work properly while the other does not the other arduino does not even light up its on led its like its dead can someone help
If you or anyone in the comments can help me out, my takes a incredibly long time to upload it never finished uploading and I don't know what the issue is
ITS SHOWING avrdude: ser_open(): can't open device "\\.\COM11": Access is denied. Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. CAN ANYONE HELP ??????????/!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I'm getting this error while uploading the program.Please Help me. " Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno" This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. "
most probably his bootloader is destroyed.. that was the case in mine... I got another Arduino and used it as ISP to burn the bootloader into the previous one.. @@@asali-channel
hi, I am using arduino nano and could not get rid of the problem . Here is Problem below. Sketch uses 930 bytes (3%) of program storage space. Maximum is 30720 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x28 Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. Invalid library found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a: no headers files (.h) found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a Invalid library found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a: no headers files (.h) found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a
Can you please upload you're code into a pastebin aswell please? Apparently you have an invalid library somewhere so your code could be helpfull also have you imported the correct libraries?
@@asali-channel The invalid library has nothing to do with the programmer not responding. The problem is driver related. Windows sees it but incorrectly and the IDE only knows what com port.
For Nano try using the ATmega328P(old bootloader) instead of the ATmega328P. Under Tools Menu then Processor: select ATmega328P(old bootloader). This solves the problem 80% of the time. Good luck!!
Nope. Did not solve problem. Have about $200 in Arduino product and it's all bricks at this point. All worked last fall. My firm opinion of most of IT right now is it's all trash and what does work is broken by people making updates. It's not worth the time or head ache to even teach the next generation how to use it.
Hello sir! Huge thanks to you. It's 3am here and I am having exhibition of my Arduino project in 8am morning, I was frustrated as hell. Lost all hopes and went off to bed. Then I saw your video and came to know that 0 and 1 are serial port pins and they didn't allow my program to update. I got up and tried and succeeded. You helped me like a miracle, will never forget this moment. Thank u so much for posting this video! 😇
Happy to hear my video helped you out buddy! :)
exactly the same thing happening to me rn but its 6;50 am
THANK YOU! My PORTS were all connecting blutooth. So I turned it off and re-opened the program to get my USB port to recognize my UNO. It finally uploaded that damn blinking sketch after 2 days. I am very green at this and your video was extremely helpful!
Sir Thank you a lot! I just wanted to learn something on my own and if I would have failed in just starting the ARDUINO UNO my confidence would be lost before going any further and I would have thought I can't do this !! THANK YOU ALOT!! GOD GIVE YOU LOT OF SUCCESS IN THE FUTURE!! I AM SUBSCRIBED!! (problem was drivers )
Thank you so much. I use Uno with Labview for Bluetooth communication program. So I used Tx and Rx pins. That was the problem! I unplugged Arduino's 0 &1 pins and it's done!
Unplugging from pins 0 and 1 just ended hours of frustration for me. Thank you so much!
you tube algo is making me cry, i got you like after 3-4 days of continuous hunt for my problem , thank you bro !
THANK YOU. Solved my (NOT) uploading problem by turning off firewall (win10) for a little while.
I too had the pins plugged in the Arduino as well. As soon as I unplugged my servo from it I was able to upload my sketch. Thanks so much!
Vic
Canada
i haven't updated the drivers...now my arduino is working properly...thanks bro..good tutorial
you are great sir u saved my money i thought my arduino had problem but it was port thank you so much sir...
Really thank you!!!!! I am making project useless box and this video saved me hours of working again thanks.
Thanks a lot. I solved the problem because of this video.
Suberb, i was facing problem from a lot of time. i also watched a lot of videos but you give the solution in this video
Thank you a lot! i was making esp32 and it cracked arduino programme settings. now i fixed it! Thank you!
I struggled with esp for along time until I started using python. I would seriously recommend doing all ESP projects with python. It’s fast, clean and so much easier to work with.
Thank you I unsuccessfully tried to program the arduino for one year thanks
Thanks for the video after installing the drivers my port option came back!! Thank You
hey dude you're the best, i did a stupid mistake by using a charging cable and i did everything from installing the drivers all of them even the ones that my board is not concerned with, but it was the DAMN cable.
Thanks and godbless 😍 very helpful tutorial .. done subscribed 😊
Thanks man, you saved me a shit ton of time
Disconecting 5V and GND while uploading worked for me. when I tried again to do it while plugged, I've got the same issue as before.
OH MY GID THANK YOU SOOOOOOOOOOOOO MUCH
Try closing Ultimaker Cura if you have it running, that was my problem
Thats Right ...Thanks
Your video been very helpful. Great👍
Thank you this helped me a lot
Thank you so much! This helped me A LOT with my problem
thank you
Thank you a lot . It really helped me
Good
Eu tive um problema de comunicação com o meu Arduino, após vários meses de funcionamento sem problemas, resolveu dar um problema de comunicação com a Porta COM CH340. Depois de muito verificar e tudo estava bem, cheguei á conclusão que tinha sido uma atualização do windows que atualizou os drivers CH340. A única maneira de resolver, é ir à respetiva porta e reverter para os drivers anteriores. Espero que ajude.
thenks
What you have done for the port??? Please reply
In my case I am getting
Sketch used 3796 of program storage space.maximum is 32256 bytes global variables use 190 byte of dynamic memory leaving 1858 byte for local variable.
This video help me .Thanks
Honestly, Thank you so much!
Thx thumb up for this video u helped me
i cant thank you enough my good sir youve helped me
You're welcome buddy!
tnx a lot solve my problem
Thanks Man
You're welcome!
My led on my arduino uno board is not blinking on pressing the reset button and code is not uploading to it can you please help me 🙏🙏
Maraming salamat sir
hello sir. In my pc's device manager ,there is neither port option nor other devices option..what should i go for?
Hello sir,I saw your video but instead of getting com3 i'm getting com7,and doing the steps u said its still not working..please tell something..thanks
You are a genius bro
You're genius!
thanks a lot super helpful
Thank you very much it worked
I tried update driver but still it showing programmer is not responding my board is arduino uno plz help
Sorry for the late response! What brand is your Arduino made of? This is important for installing the correct drivers!
thanks for the help mate
Thank you thank you thank youuu
You're welcome welcome welcomeee
I love you bro ! Its working..
Hi sir
I have tryed all your methods of trying to get it to work put not even the COM its plugged into is showing can you help me
I have question
when I enter code in arduino and save it before saving the code it closed I mean ide closed
I am using mega 2560 with python using pyfirmata
Since i made communication with my program i was using it through its port no ttyACM0 ( i can see it by its ide installed in my pc) with board selected as Arduino mega 2560 nd all was working fine
But from last two days suddenly and automatically it changes its port no continuosly
Means lets say currently the Port no is ttyACM0...
Now if i do power on and off then i try to connect it then it shows errror in communication
Then if i check it then it showing that its port no is ttyACM1 now
Similarly next time ttyACM2 and so on
May i know why this is happening?
Any idea?
If your arduino still doesn't work, here's a link that I found helpful:
www.hobbyelectronix.com/2020/05/arduino-troubleshooting_20.html
THank you so much man
i have driver, i removed RX and TX wires, i have bootloder and still not uploading
sir in my one i cant upload a file to the arduino can you solve this problem
thanks alot
hello sir,
i have a case....
arduino uno: "error connecting to the avr! retrying in 10s (no response from the board: list index out of range, please check the connection, port setting or reset the avr)"
how is the solution ..... Thanks
Sir I have facing a problem in degitalwrite declaration please tell me how I can fix it
Sir i am doing a voice controlled robot and my arduino is not getting the code uploaded.Should i remove the 0 and 1 pins and try uploading???
my arduino leonardo the COM 7 is gone and i can't install or erase a new code
hey pls help
i have this arduino uno, it always error when uploading, i check everything on the software and everything was right. but my arduino LED always blinking even though i reset it. is this one of the problem that might be the cause i can't upload?
Are you getting any kind of errors when uploading? If so please tell me which one
@@asali-channel it says sync error, and programer not responding, do you know what's that mean?
I might know, can you tell me what type of arduino you have? Duemilanove, Genuino, etc? (I don't mean uno)
@@asali-channel i have genuino
Love u broo
i have two arduinos and two cables one of the arduinos work properly while the other does not
the other arduino does not even light up its on led
its like its dead
can someone help
Hello Valued Expert,
May you help me to get a sketch for reading and changing SDcard CID.
Thanks in advance!
All I get is
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x27
this is permenent flashing ? or restart then erace ?
If you or anyone in the comments can help me out, my takes a incredibly long time to upload it never finished uploading and I don't know what the issue is
ITS SHOWING
avrdude: ser_open(): can't open device "\\.\COM11": Access is denied.
Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
CAN ANYONE HELP ??????????/!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@@abrorbobomurodov2361 what???
how to fix if orange led not blinking
Hey I have also made video on this problem.
Oh great to hear, I'll check it out! :)
@@asali-channel Oh Thanks it will be pleasure for me.
I'm getting this error while uploading the program.Please Help me.
"
Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
"
Hello
I'm facing the avrdude:stk500v2_RevieveMessage(): timeout error.
This is a common problem online with no definite solution
Hlo sir This is Trilok Singh from India.sir my Arduino uno 3 is uploading show error again and again .and same nano .so please tell me about something
why i always get AVRdude : stk500_getsync : programmer is not responding. my port and my board is on correct place ..??
Sorry for the late response! Have you tried to unplug all wires before uploading? Once it has uploaded try to reconnect the wires
@@asali-channel i already tired that
Perhaps yours is broken, I suggest you try again to follow every step I took in my video, from what brand is your Arduino Uno?
most probably his bootloader is destroyed.. that was the case in mine... I got another Arduino and used it as
ISP to burn the bootloader into the previous one.. @@@asali-channel
please help me out i am making tiny sorter google experiment
good research
How to reset an arduino?
There should be a small red button on your Arduino Uno
errors messages are typical than codes
Doesn't he sound a bit like Mr cheese?
My arduno is broken L light is not working
its showing programmer is not responding please help
No wires are connected to pin 0 & 1?
@@asali-channel i am not understanding pin 0 and 1
@@asali-channel how to do please help i am new to aurdino its urgent
No wires should be connected to pin 0 & 1 as these are part of the serial interface so please unplug any wires connected to those pins
@@asali-channel i am only trying to upload program on aurdino nothing is connected but still showing error can i try that aurduino on win 10
no sound
Anyone having exit error 1
This means there is an error in your code:
forum.arduino.cc/index.php?topic=365466.0
Problem solved driver problem
Thankyou so much bro! you saved my ass lmao
opa, amigo, tenho arduino uno, e da erro quando tento carregar para a placa, como resolvo isso? como você resolveu o seu?
Happy to hear it worked out for you!
Lost
hi, I am using arduino nano and could not get rid of the problem .
Here is Problem below.
Sketch uses 930 bytes (3%) of program storage space. Maximum is 30720 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x28
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x28
Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
Invalid library found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a: no headers files (.h) found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a
Invalid library found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a: no headers files (.h) found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a
Can you please upload you're code into a pastebin aswell please? Apparently you have an invalid library somewhere so your code could be helpfull also have you imported the correct libraries?
@@asali-channel The invalid library has nothing to do with the programmer not responding. The problem is driver related. Windows sees it but incorrectly and the IDE only knows what com port.
@@mikelee1906 thanks for your response, I appreciate the help!
For Nano try using the ATmega328P(old bootloader) instead of the ATmega328P. Under Tools Menu then Processor: select ATmega328P(old bootloader). This solves the problem 80% of the time. Good luck!!
@@mikelee1906 well what about uno
Lol
Nope. Did not solve problem. Have about $200 in Arduino product and it's all bricks at this point. All worked last fall. My firm opinion of most of IT right now is it's all trash and what does work is broken by people making updates. It's not worth the time or head ache to even teach the next generation how to use it.
blah blah blah you talk to say nothing