Is This The KING of New PC Cases in 2024? Montech King 95
Vložit
- čas přidán 22. 05. 2024
- We built in the Montech King 95 and found some features that we really enjoyed. The design itself isn't incredibly "unique" per say, but as we dug deeper we discovered some unique traits that make this case a true contender. Let's talk about it and check out this latest case from Montech!
FREE PC GIVEAWAY: www.metapcs.com/freepc
0:00 Intro & Unboxing
1:05 Initial thoughts
4:46 Build Montage
5:42 Build Notes, Temps and Final Thoughts
FOLLOW OUR SOCIALS AND ENGAGE:
tiktok: / metapcsonline
instagram: / metapcsonline
facebook: / metapcs
twitter: / metapcs
#pcbuild #gamingpc #pccase - Věda a technologie
I have this case with a tower cooler on 7800X3D+RX 6800 and boy is it amazing! Temps average 66c for CPU and the GPU is about 45c under gaming load. Light use at about 42c CPU and 34c GPU in full glass mode - I love it! For a first builder, it was so spacious and easy to build in - highly recommended!
I was wondering what difference that would be with a tower cooler. So tough to choose which case if you want to show off a beautiful tower cooler and this one would do it.
@@RLRPhotography I have a cheap little Thermalright Assasin 120 SE and its kicking butt so far!
@@RLRPhotography Tower cooler seems ok. I don't stress test but I got the pro white edition with a new 5800X (no overclocks or anything) and the Thermalright Assassin (non-SE) White, actually bought 2 extra of the Montech case fans to replace the Thermalright ones for matching rgb, and it seems to hover in the 60s when gaming in full glass case mode. Sometimes when it is super stressed it can get to around 77 (like Steam installs for some reason, whats up with your installs pegging max CPU load, Steam?) but I haven't seen higher than that. I did put one of the Thermalright fans in the top along with a Noctua for some extra exhaust, though. Took a lot of tweaking to get thermals and sound set but its all good.
here i am 25 yrs old with no experience about building pc coz i dnt have one since birth😅 but im learning step by step how to build a pc every watching ur videos guyss i wish i have my own pc someday and build it even lower specs hehe tnx for ur videos bosses i wish that i can mke someday❤
A couple of build tips: That hinged rear cover can be easily removed during the build by just grabbing it at the upper right corner and yanking to the right, pulling the upper hinge out. You can easily replace it when you're done (reverse the procedure to snap it back in). But I couldn't think of a reason to replace it.
I bought the non-pro version to use my own fans. To provide a nice space for my own , I removed the upper hard drive cage and mounted my psu in the upper space. That left a large, flat rear panel to adhere my fan and aRGB splitters.
Also, with the non-pro version you're provided an adapter cable that breaks out the front panel leads. It also separates the leads from that small button so that you can plug it onto the motherboard Reset pins and make that small button a Reset button.
This is an absolute beast of a case! I can’t wait to see more from you guys!
the swivel fans and mesh add on are pretty nice! I don't really notice the rounded glass enough to be wowed by it tho
seeing the Avatar case beside it was like, wow. that thing is massive and must be pretty heavy
The build you made for this case was pretty nice, it all works nice together with the case👍
Y’all’s PC’s are always top of the line!
Beautiful case, I think it's main selling points is all the fans and fan controller with the glass panel setup. Because you don't need to buy anything extra for solid thermal performance
Just received my King 95 pro today, and now i can't wait to get home from work to swap parts from the old case into the new case, also new processor and and larger cooler.
I ordered this case this past weekend for my first build, I’m excited to get started!
I love the look of this case and they way you can change the direction of those front fans is cool. I think also having the buttons and n the side instead of the bottom is a better option.
What an amazing and beautiful case !
I installed 2)140mm Montech fans in the bottom and used one of the 120mm fans located with the screws as to no threaded holes to mount. Also 2) 140mm fans in the top. Temps are mid to upper 30c, i5 12400 and rtx 3060, 3) 2tb nvme and 1) 4tb HHD 3) 4tb SSD . This case is so much better that my old Thermal Take H200, very happy. 😄😄😄
Love the case. It is at the top of my 2024 list right now.
This case lowered my I7-12700 temps by about 20 degrees. In my old case my cpu would sit between 85-90 F down to 69-75. This case is fantastic and looks amazing. I love mine.
Love your videos!!! That’s a cool case!!
Wow, amazing case, can’t wait to see the build at META PC
I already have this case and, I can honestly say, the temps on GPU and CPU are no different to my old Corsair Case! The case looks amazingly cool and extremely well engineered.
I have this and I absolutely love it. It was my first build and it was crazy easy to build even for a first timer
That's great to hear! Love hearing feedback from someone who owns the case.
I have seen this case before and it looks like a nice addition to the fishbowls. Wish they did a full size build, 😢
Such a nice case for real 😮
so i got this case a week ago and i have to say this is one of the most beautiful cases ive ever seen. For that price its just unbelievable.Got the pro version I love the fans! they look awesome. Cablemanagement is so easy. The only thing i dont partially like is the connection on the side. Id rather have it on the bottom like with the Hyte y60-70. Apart from that im totally mindblown by how good, functual and spacious this case is.Theres room for everything. The RGB bar at the front looks wonderful.
I bought 3 extra fans for the top cause i dont use an aio cooler. The Airflow is amazing even with the Glasspanel. Ryzen 5800x3d runs at 55 C max. The Gpu on 60-70C.
Montech did a great Job with this case and for 150€ (the pro version) this is a steal.
Great case! Nice RGB also.
I just bought this case for brand new build. Can’t wait for it to come in
This does look like a great case. Does it have a vertical GPU option?
Love your videos!!!!
i love it, the only thing id like to see is the availability for a vertical GPU mount
That is an absolute beast of a case!!! 😮
Case looks dope the build looks sick
That is an absolute beast holy 😮
Very clean simple yet effective
Nice case indeed. I am looking into building a new one and really love the Lian Li cases, so this could be a nice option.
Can you vertically mount larger GPUs in this? Will it have enough space for the bottom fans?
I definitely want this case for my build.
Fishbowls looking crazy
the build you mad for this case is beautiful very cool
Beast of a build!
Love it. I want one now
I just got my white version of it, it looks so good, gonna switch it out for my current case!😃
Really liking the look of the case, was just wondering if it would be viable to add a Ryzen 7800X 3D with a decent twin tower cooler and add 2-3 exaust fans to the top? Or do you think with a fish tank style case an AIO is a must to keep temperatures under control? 🤔
I have built one of these (Red 🎉) and the answer is yes, definitely. Fitting a a three-fan radiator on the ceiling would be fine and there’s room for the twin-tower.
Looks amazing
I have this case just waiting for my new MB to arrive.
I’m not sure which fans I like more, the ones with rgb in the actual fans, or the outlines like the fans in the case
For the NON pro version without rgb hub. If my motherboard only has 3 5V ARGB headers (3A max), will i be able to connect 10 argb fans (9 case fans and 1 cpu cooler fans) AND the front panel light strip? Thermalright argb fans btw.
Not sure of your question. How many fans you can connect to the motherboard depends on the motherboard and how you daisy chain the fans. Or you can get an accessory fan splitter to plug them into. If you get an accessory splitter, I would recommend removing that upper hard drive cage and mounting the psu in the upper position. That will leave a large, flat rear plate large enough for you to adhere both a fan splitter and an aRGB light splitter.
DAM WHAT AN ABSOLUTE BEAST OF A CASE!
honestly, the fans are the best part, the lights on it are amazing.
I'm getting the white version of this pc case and building with the Ryzen 7 7700x and RX7800xt, with an all white theme. Costing about £1600, and gonna have 9 fans in it, with the hub in the back, be able to take all 9 fans that I put in the case?
I just built my first ever PC a few days ago and went with this case.
I decided on the 7900xtx and 7800x3d (yes, fairly overkill especially for a new PC guy, buy I don't want to think about upgrading for a long time).
I ended up with 9 fans total including the 3 fan AIO mounted to the top, so 9 fans should fit just fine. Very pretty clean looking case that fit everything I wanted with some room to spare, while also not being overly bulky.
Can i set the colors of my preference in this case?
Beautiful PC!
That looks amazing
This is so good looking
Thanks!
Thanks legend!! 🙏
Dude that's a monster
what a beast! i would buy that
Hi just went to enter but says promotion not available in your area😞😖any chance i can still stand a chance to win?
The way the thing looks the fams
its just suprising that you can build a pc so fast and easy.
That case looks pretty good ngl
Amazing pc 🎉
Damn what a case
THis looks so cool oml.
i got these beautiful case with 4070 super and 5900x
well what about the gpu sag ? can you put something there to prevent it ? ( since there are fans at the bottom , so some holders might have issue with that , if its pillar holder / or maybe vertical GPU bracket ? )
My Gigabyte RTX 4080 came with a snazzy anti-sag support bracket that consists of an L-shaped bracket that screws into standoffs that replace two of the mobo's mounting screws in the lower-front corner and extends forward toward the case front and a piece that screws to the end of the cooler with a tab that sticks up for the screw which attaches to the bracket to suspend the card.
Because it's hidden behind the card I got a lot of comments on Reddit about needing a support for it because it just looked like it was floating. Also got a lot of "your bottom fan is backwards" remarks because they didn't know the Montech Sky Two had reverse pitch fans.
Luckily the card I put in this case came with a bracket that mounts like the GPU does but extends out and screws to the opposite side of the card for support. No sagging and feels solid enough.
I'd prefer a vertical stand but that fan would get in the way.
@@sawdust8691 same. Also bought 4080 super that came with the bracket .
I bought fractal design flex 2 vertical , but didn't fit montech, so I'm glad this gpu bracket was there in packaging
The avatar pc still keeps getting my attention even if it is not the main part of the video
Entry for the PC giveaway ❤
Cool video
the curved glass look so good, but the mesh gives better airflow, so im torn on what is better
negligible difference
Why didn’t Montech make the filter on the bottom removal from the front instead of the back. Only downfall I am seeing from this case. Looking good and all the colors, black, white, red, blue, you really have a choice. However, those colors will cost you a few more dollars.
One addition they could make on future variety is to add a CPU monitor on the front, something simple. Would be a great addition to know what is happening to the system.
Nice video!
I thought the side would be best
Man that's impressive no way dude
How much would this build be
It looks like a pc fit for a king
I have a question, Do you ship to southeast-asia? Or do you only ship in the US?
Ship what to SEA? We in Indonesia can get everything already
Sickkkk
Wow 😲 beautiful 😍
I love it
Hooray
Do you guys do rent to own?
Keep it up
Lots of effort from montech, it could be one of the best pc cases out there
I like how roomy the inside is with all the components
Why montech isnt in every rigeons?
Can you do a giveaway for people who have followed you for eons in Europe? Every time you have a competition it's always not available in my Area. You have a fan base beyond The USA. 😊
Sexy clean Build , Can't wait for mine.
I need a new pc so badly
Where’s the full video?
fish "bowl"? never heard that term.
Commenting for the avatar pc :)
A third fishbowl case means I can put my magikarp and Gyarados together☺️💀
😂😂
🎉
My mother bord went out today and I joined the giveaway so hopefully I win cause I don't have the money for a motherbord or anything else
I wanna win Avatar pc 🎉
Came out good . I'll take care of it and show it off 🎉🎉
Its beautiful man but money is problem here😅but one day ☝️
I want the avatar pc
I would like the pc please for an upgrade as my ps4 overheats so much 😢
What’s good shawty
Hi
It looks like a good product for ballers. Stock it. People will want to buy it.
My giveaway
You should just keep that one
The avatar one looked alot better🤷♂️
Damn