PVC WAR HORN - Test Build
Vložit
- čas přidán 27. 07. 2017
- Building a small war horn from PVC was fun but you're gonna love the gigantic final project that I do next! Can you make a better human powered PVC war horn!? #HUMANPOWEREDPVCWARHORNCHALLENGE
MY PATREON
/ jairusofall
GAWKBOX : www.gawkbox.com/jairusofall
TAD : givetad.com/JAIRUSOFALL
------------------OTHER STUFF------------------
Instagram: jairusofall
Facebook: / jairusofall
Twitter: @Jairusofall
Patreon: / jairusofall
Sponsorship Inquiry: bsearcy.joa@gmail.com - Zábava
thats some mad-max shit right there
yes
Wickedddddddddd!
the Hacksmith you from Maine?
Keep knocking Doc, I don't care The Hacksmith? He's in Ontario. His channel is amazing
Kyle Campbell thanks Kyle!
FOR FUCJ SAKE
I think the hacksmith has the exact same recommended video's as I have... Nice
The tone at the end was awesome!
I got that deep sound!
Kinda reminds me of the tripods from war of the worlds.
Imagine walking through an abandoned house or through the woods and hear the deep sounding horn
“Higher pitches so it doesn’t sound like a dinosaur”
the idea that Vikings came over with like, dinosaur esque battle horns is awesome tho
6:09 chewbacca?
Lol yeah exactly
If you want to stick ABS together use acetone. It forms a chemical weld between the two sections and makes it pretty strong. You basically just paint the acetone onto the two edges you wanna stick together then hold it in place and it should set somewhat quickly
For a weld that is as strong as the base material, dissolve some ABS scrap in acetone until it forms a paste, then use it like glue. Once the acetone evaporates out of the paste, you'll have a solid ABS weld bead and no gaps. Much stronger than using just acetone but it takes hours to set if it's thick.
Dude, you triggered something! Mentioning all of those other CZcamsr's made your viewers go off and watch / notify them. Then they stuck around and watched a video or two of theirs, so you contributed a huge amount of "session" watch time. This is my theory. Interesting... I'm on vacation, but I'll try this when I get back!
I made a pvc ship horn out of 90mm gutter pipe and a stiff PET plastic. Lets just say the neighbors dont like when i put 100psi through it.
harrison law 😂👍
harrison law hahaha
#PVCWARHORNCHALLENGE This could be awesome! Especially if we can get some people like the Hacksmith or Colin Furze involved!
Side note: The pipe I used for the horns was HDPE not ABS. Really difficult to bond.
If you use acetone on both abs surfaces that you wanna weld the hold them together for a few seconds than the acetone will evaporate leaving the two parts chemically bonded and its very strong :)
Austin Lower Well I wish I knew that a little while ago! LOL Thanks! I'll know for next time.
JAIRUS OF ALL watch anchorman. that's why he says loud noises and yells
I've been summoned.
Also I think Colin Furze has already won, he farted on France with a giant pulsejet =P
Awesome project. I use a hot air welder hand tool and and plastic rods to weld this on occasion, and it's still a son of a B*!ch, so I felt your pain brother 😂
i dont know why i just love this dude, he is my favourite crazy scientist.
Thanks!
Build this yourself and you too can hook up with some hot T-rex teens in your area !
Just made a pvc airhorn like the video. It is extremely loud and its so much fun to add different lengths of pvc to the end to see what tones I can produce. Thank you for the video!
I used to go to a lot of LARP events and having something like this would've been super helpful.
Your shirt collection is amazing
you should try filling the pipe with sand and capping both ends and then heat forming it to prevent it from being crushed.
Should have used abs slurry ...mix and with acetone it's great for bonding abs look it up
Jamie Ward it was hdpe it might still work idk
Friggin awesome. Something to play up in the hills at night to terrify the neighbors lol.
1:50 "Horn! Bphfphfhfppfh..." Great moment.
I JUST SHIT MY PANTS!!!!!!!
Couple of tips: instead of trying to custom form your funnels, use cheap/inexpensive black plastic funnels from an auto parts store like the ones used for draining/filling automatic transmissions. Also to bend pvc pipe without it kinking, try filling the pipe with a sufficient quantity of play sand preheated in an oven to about 400 deg F. The hot sand will soften the pipe allowing you to bend it in whatever shape you want while keeping it from kinking/collapsing. Cheers!
lol we all have that one friend who screeches for the hell of it.
Amazing video as always! You are a big source of inspiration for me to work on projects, even though I'm more of an electronics/programming guy than a builder.
Keep up the amazing work! I can't wait to see what you make next.
Nathan Seymour Thanks! Comments like that mean a lot to me!
Finally, your channel starts growing! Good for you!
Thanks!
This has been my field of expertise for over 25 years now, and I hate to break it to you, but between 279-450BC PVC was more of an ivory colour! But apart from that, beautiful work mon ami. 👍 Best wishes from an Englishman in a French forest (lifts visor and salutes) 🏆🇬🇧⚔️
I'm glad you are pretty rapidly gaining subs. When I first subscribed you were a small channel building at a big channel production level.
Just found your channel, super innovative and entertaining, keep it coming!
This is such a fun idea, great video!
I lov the dedication you have on your channel, and how you don't give up. You really deserve more subscribers and supporters
Now this is gonna be epic project! I challenge you to make the final horn loud enough to break your neighbours windows! However if you cannot get it loud enough just toss it through the neighbours window to maximize the annoyance :D
Love It! Thank You
That looks awesome!!!
Traditonal plastic welders use a spinning rod of filler plastic. The friction heats all three components (the sides to be bonded and the welding rod) and welds them together. Other plastic welders heat both sides by using a hot plate between the two sides and then removing it and sticking them together. Keep the torch for welding/soldering metal.
Thanks for the info!!
The multiphonics at the end are so cool!!
Oh my god Jarius that last sound sounded so cool
This video ended up In my recommendations and I love it. You earned a new sub.
That was an awesome build!!!👍
More inspirational model building videos? That video was so great
I like these kind of channels like JAIRUS OF ALL, Colin Furze and The Slingshot Channel
luv dat
Fooking awesome!!
That at the end sounds like a genuine war horn.
That horn sounds badass.
Test the power fist on materials with high tensile strength.
Jairus, the reason shooting the air horn into the pipe didn't work is because all those bends has actually created a low pass filter. Your DIY air horn works because it's a lower frequency. If you took some bends out (like almost all) it would actually be much louder.
Subscribed because he cracks me up
Awesome!!! I'm glad I could help out!!! It's pretty sweet to see my name pop up in your video! Keep it up man, love your videos!
that last part was beautiful
0.5 sec intro. I LOVE THIS CHANNEL!!!!!!!ive seen vids wit 4+minute intros...
Holy shit.
I need to do this.
That is the best war horn I've ever heard.
perfect for new years!
To bend pvc similar to a mandrel you can plug the ends (wood plug works well) and fill it with hot sand heated on a stovetop. The pvc absorbs the heat from the sand and is able to bend without crushing because the inside of the tube is full.
The best material I've found for making PVC air-horn diaphragms is vinyl sheeting. It's pliable enough that it's not too awful to work with, but it's also quite tough.
I would get a bending spring for the thin plastic to prevent crinkling or cracking. The spring will help to keep the pipe from losing form when heated.
Hope this helps, nice build.
7:16 sounds bad ass. I'm making one now
63k subs? Damn you blew up man.
It happened in about two weeks! Crazy fast!
Your consistently awesome projects have to be a big part of that. Keep it up bro.
This is amazing.
If you build that gargantuan one, please, if you can, add the weight to the diaphragm again. That lower noise is really badass!
Since you actually told us when the video was going to be loud and not i am going to subscribe.
That's a nice courtecy.
Subscribed. This is like... The dumbest most awesome thing I have ever seen.. I NEED one
I can't wait to see the bigger one
"time to make this hot and try not to die." I like the way this guy lives his life.
Thats actually really cooo sounding
Very cool! But couldn't you use an actual plastic welder to weld the pipe together at the seam?
Ian Ingram I could've but I don't have one. 😔
Damn this is cool!
I totally see you doing a Raider warlord cosplay with that!
This build didn't have any wreckless endangerment of Bryce. 3/10.
Can you imagine going into battle, and sounding your horn, and everyone stops, with a very weird expression on their faces, only to drop to the ground and crapping!!
If only the brown note actually existed!!
Holy Shift! I love your mother function shirt!
awesome
have you gone into bell making ?
loads to be learnt and tried there
I hope the next horn does reach the brown node. Beautiful south park reference
that diy air horn tho! super cool!
HELL YEAAA MAKE IT!!!!
... so it doesn't sound like a dinosaur
I literally laughed out loud on this one
HAHAHA
Sounds sick at that medium pitch.
Another great adventure with jairus! Lol
Great video bro :)
as you have found it is difficult to make a continuous profile from your straight sided pipe. You can build a very effective horn using stepped sections of larger and larger pipe to provide the horn expansion.
to plastic weld ABS can't you use an ABS paste by melting scrap ABS in acetone? then use it as a glue to melt the two sides together
Some use sand to keep copper pipe kinking when bending, could work here also, but weight will become an issue.
Great job. I think I'll build one but use plastic oil funnels.
This video made me spit my water out from laughing. I feel bad for my dog but you've earned a subscriber.
Nice video!
You know ASB glue is in every hardware store, right? The other thing If you filled the PVC pipe with sand or salt cap or plug the ends before you started to bend the pipe in a coil it wouldn't of collapse in the tight bends.
BEST...SHIRT...EVER!!!!!!!!
Very cool build. I'm always curious how a video got shred when it has many more views than the channel has subs. Any advice on that?
Urgent Question: While the challenge may be over, Homecoming season is not, I plan to build a PVC Greathorn/Warhorn and need to get a better understanding of the artificial little diaphragm piece. Are you/him blowing like a horn, or are you simply pushing air into it with the pipe touching the plastic? Any tips on getting a deep noise from my horn? If anyone has advice please send my way!
If they sounds that horn on war, must be named The War of Farts
ABS can easily be chemical welded with acetone. Great build :)
To resolve the kinking issues you had with the curly bit, you could run an aluminum rod, (or any bendable, yet rigid rod) through it, and bend it to your liking. You'll get the clean shape you want, but it won't be all floppy because of the rod.
Ive seen people fill the pvc pipe with sand, and pack it in to let it retain its shape, that seemed to work pretty well.
That is beautiful
If you want to bend the pipe without constriction, you have to fill it up with sand first! This definetely works with metal, so it should work with the PVC as well
if you want to bend a pvc tube, close one end, fill the tube with wet sand, warm the tube, bend it, remove the sand, voila! perfect shape.
I gotta say I'm impressed
That was the must unenthusiastic "Tada" ever heard. I love it.
Hey just some advice, if you're trying to draw as straight line on something round, such as tubing, use a pice of angle iron. Its much easier.
I appreciate the heads up on the volume
Soo cool!!
Hello Jarius!
Im making a video game, and looking to have a war horn sound over the battlefield when demons approach... i was wondering if i could use this video for sound effects?
and a bit of a further request, i was wondering if you could release a new video with this horn being sounded as a battle charge lol
i know im asking a lot, but i would really appreciate it!
Thanks, either way.