Make a JigSaw Table | DIY Portable Jigsaw Table - Part 2
Vložit
- čas přidán 16. 06. 2024
- In this video I'm building a jigsaw table / jigsaw cutting station.
► For more details check out my website: allflavorworkshop.com/
► Tutorial and Plans available: allflavorworkshop.com/how-to-...
► ALL Woodworking Plans: allflavorworkshop.com/woodwor...
This is the second part of a video for a jigsaw table build - Watch the first part here - • Make a JigSaw Table | ... . In this part I am making a different type of a fastening system reusing the components I built in the first video. The system is attached from the side of the jigsaw table. The arms are held by 2 wooden knobs allowing them to move both vertically and horizontally (make wooden knobs - • Make Awesome Tiny Knob... ). The head with the bearings is fixed to the horizontal arm with 2 screws in a slot allowing for fine tuning depending on the width and depth of the jigsaw blade. This attachment from the side gives more space on the table allowing for a jigsaw fence to be attached and used as well. I made an easy (removable) one in the video using a simple locking system - a nice guide for straight cuts.
🛠 Tools and Material (affiliate links):
Jigsaw - amzn.to/3S85cDr
Trim Router - amzn.to/3HbQcOg
Hand Drill - amzn.to/3HqLEnH
Circular Saw - amzn.to/4aMD0xg
F-Clamps - amzn.to/48ArzY1
Spring Clamps - amzn.to/41Nuh9D
Chisel Set - amzn.to/3tHNJrT
Machinist Square - amzn.to/48fT6xw
Speed Square - amzn.to/3RO67Hy
Drill bits - 6mm - amzn.to/48Kaaf7
Forstner bits - 15mm - amzn.to/3Hd1aDb
Jigsaw Blades - amzn.to/4aXeF83
Wood Glue - amzn.to/48ltKhJ
Epoxy - amzn.to/3tJ5R4L
Double-Sided Woodworking Tape - amzn.to/3tPMGpM
Hardware Assortment Kit - amzn.to/41PodgQ
Bearings - amzn.to/48QpYwD
Plywood 12mm - amzn.to/3tLZ5ez
Plywood 9mm - amzn.to/47pmMXQ
Aluminum L angle - 540 mm (15 mm x 15 mm x 2mm)
M4 Bolts, M6 Bolts, M6 T-nuts, M6 Washers
🛠 All My Tools & Gear:
allflavorworkshop.com/tools-a...
We may earn an affiliate commission when you buy something through our retail links. As an Amazon Associate AllFlavor Workshop earns from qualifying purchases.
► Subscribe To AllFlavor Workshop YT Channel: bit.ly/2T9cIxD
► Sign up for my newsletter: allflavorworkshop.com/mailing...
► Other helpful tutorials:
• How To Make a Jigsaw C...
• How To Make a Jigsaw G...
• How To Make a Circular...
► Follow me on:
Website - allflavorworkshop.com/
Pinterest - / allflavorworkshop
Instagram - / allflavorworkshop
If you have any thoughts or questions, let me know in the comments below and I will get back to you as soon as possible. I am not a professional but I like making something new with my hands. Any suggestion or advice is highly appreciated.
TIMESTAMPS:
00:00 Cutting with a jigsaw table
01:03 Attaching a removeable tightening jig
04:50 Making a vertical adjustable mechanism
05:57 Attaching a horizontal adjustable mechanism
08:45 Building a fixing system for the blade
09:56 Assembling all parts together
11:08 Making a simple jigsaw table fence
12:01 Jigsaw table cuts demonstration
Thank you all for watching and for your support.
#diytools #homemadetools #jigsawtable #jigsaw #allflavorworkshop
----------------------------------------------------------------------
WARNING:
All information, processes and working procedures provided by AllFlavor Workshop is of a general nature and is furnished only for educational/entertainment purposes only. No information is to be taken as professional advice. You agree that use of this information is at your own risk and hold AllFlavor Workshop harmless from any and all losses, liabilities, injuries or damages resulting from any and all claims.
HAVE FUN BUT ALWAYS KEEP SAFE!
----------------------------------------------------------------------
how to make a jigsaw table
make a jigsaw table
jigsaw table jig
jigsaw table build
how to make a table saw with a jigsaw
how to make a jigsaw cutting station
how to make a jigsaw guide
diy jigsaw cutting station
diytools
shop made tools
homemade workshop tools
AllFlavor Workshop - Jak na to + styl
Thank you for watching, thank you for your great support!
► Tutorial and Plans available: allflavorworkshop.com/how-to-make-a-diy-jigsaw-table/
► ALL Woodworking Plans: allflavorworkshop.com/woodworking-plans/
🛠 All My Tools & Gear: allflavorworkshop.com/tools-and-resources/
Check out the description. Subscribe not to miss anything!👍 THANKS!
@Gianni Finnegan We dont, and everyone knew she was doing that guy from 2 streets over.
One of the better designed tables. Some real thought gone into this one. Well done.
Sieht SUPER aus, gefehlt mir sehr
Thank you so much Johann
Belo projeto,vou tentar fazer um parecido
Very good & neat job. Thank u!
Thank you too Stelios. Appreciated.
Nice :) : here’s an upgrade idea, if you angled that support arm, let’s say 45 degrees backwards, then you could make cut-outs not only along a long board but across it.
Hi Naqua, great idea, thanks! Something for another creation / video. 👍 Happy you liked it and thanks for watching :)
Отличный станок!👍
Thank you Yuri 👍
Excellent
Thank you Akbar. Happy you like it. :)
Your drilling machine and stand look solid. Particularly the chuck. Can you tell some information on this?
Most excellent video and project. I've looked at quite a few vid's on this and your is the best by far. Do you have or sell plans? Keep broadcasting!!
Hi there, thank you for such a nice comment and support. I have plans on paper, they are not public though yet but I am planning on doing so. I am glad you liked the video. Much appreciated 👍
Sehr gute Lukas. Sie nehmen nach dem Meister JSK, aber Ihre Arbeit ist besser für den durchschnittlichen Handwerker geeignet!
gooooooood شكرا
Thank you Kamal! Much appreciated.😊
Самое сложное изобретение, но мастеру - класс!!
Thank you Yurchik. Appreciated. 👍
@@AllFlavorWorkshop Thank you
Mythical. Tanks
Thank you too! 👍
In this is great.
I've been trying to find a long scrolling blade to make thinner, more accurate cuts. But it seems they are all under 4 inches. Any suggestions?
That's right. Same struggle here. :/ With the jigsaw table build they work fine with narrower wood. I think the precision would be a quite off if longer scrolling blades were used. Fot that I am planning to build a scroll saw. Let me know if you get some info on those long jigsaw scroll blades. Thanks
@@AllFlavorWorkshop will do.
I was actually considering making my own. Perhaps with a sawzall blade, or a coping saw style blade.
I'd love to see a scroll saw table build. I made a large one with a router and a long, but dangerous bit, but to get it to cut thin is tough. Perhaps it might be better to use a cut-out tool? I tried with a rotary tool, but tbh, the rotary tool industry is garbage. Dremel went to 💩, and I tried so many other brands, but they all seem to be junk (if you need adjustable speed). Milwaukee has a great o e in their 12v lineup, but for most things I like a rotary tool to be corded.
With that said, the cutout tool might be the way to go for a scroll saw. They tend to be pretty strong, but sometimes, too strong.
Either way, I look forward to the scroll saw build. And I'll let you know how my "long scrolling blade" adventure goes lol.
@@carterscustomrods Sounds interesting. And I wonder myself. I've been thinking about this for some time and I see there are few setbacks on the way. I am planning on making one in the future but I am still figuring our few things. Nevertheless there will be few updates on the build until its all done.. ;) let me know.
Do you think a v-slot aluminum extrusion would be a better support bar to run across the top?
It would be more rigid, lighter weight, and easier to adjust. But I'm trying to think of the downfalls to using an extrusion.
Я сто раз подумал бы, перед использованием.придумайте защиту на пилке.уж очень она не внушает доверия.вся конструкция хорошо продумана.единственный,на мой взгляд, минус.
Hi Денис. Good point. Everyone take precautions while working with power tools. Thanks, stay safe. 👍
Any plans
Working on it, thanks ;)
Stiksav