Toyota Tundra: Welding On New Convertor Flanges & Replacing Muffler
Vložit
- čas přidán 21. 12. 2022
- All this time I believed Scotty and yet here I am with a broke down Toyota Tundra. Not to mention MY OWN! It's ok though because it just needs a new exhaust system and a few convertor flanges welded on. I guess we could forgive him...
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained. - Auta a dopravní prostředky
Now before we start a *Chevy vs Toyota* war in the comment section let it be known I am a Toyota fan boy haha. I was just poking fun at our good friend Scotty for all the love he gives Toyota. I can't complain to much about my Tundra. After all, this is the first "repair." Not to mention most 2013 GM's I can't put on my lift because the frames snap in half or crush from all the rust 😂 There....shots fired! 💥💥💥
Seriously though😐 ....calm down they're all junk when they're broke
Plus 1000!
But how many treat there trucks with either fluid film or krown?
I'm not a fan of chevy and will never own a Japanese crap toyota but to each their own choice
Theres no good vehicles left anymore too much emissions.
I’ve heard a saying at the shop my dad worked at if it’s got … or tires you’ve got problems. I’ll leave the three dots for the word missing to keep it pg lol
The last time I heard someone break so many experts’ hearts, it was my video. 😂 I hate working on my own stuff too. The owner is a cheapskate that never pays!
You're rubbing off on me haha
You should complain to management, Scott.
Giveaway all the repaired vehicles for Free.
@vehcor I watch all your videos, you are extremely talented at what you do. Keep up the good work (without the bi*** mittens 😂😂😂
Let the pizza girl do the work
I was a service tech for 42 years and there is something extremely satisfying watching a craftsman do work. The skill and explanations of the process keep bringing me back and loving every video. Thanks again Mr. O for the awesome videos ( yes at 75 years old I said awesome).
I've been an auto tech for over 20 years and I think this channel is the most legit auto repair CZcams channel I've seen. Two thumbs up.
The ChrisFix "soapy wudder" killed me! 😂
It’s awesome how far the channel has evolved. I found your channel when you only had around 40k. With nearly 20x that many now, you still don’t have a sponsor or do any stupid advertising plugs (I say this as a compliment and with respect). Thanks for keeping it real.
Sponsor free you tube content is getting thin on the ground these days. Thanks Eric.
Its all about how level headed, sincere, honest and trustworthy he is. NO BS! Its like, I would really enjoy having this guy as a friend! I follow Eric to watch him methodically hunt down and solve really complex issues. Its amazing when you can insert your self into his troubleshooting scenario and do/predict the next step he will take. YES, I have been schooled by Eric but, not very often. I lived in the RUST BELT most of my life and have experienced the exact same vehicle cancer issues he experiences. Ive had damn older Jeeps dissolve out from under me and toil over the same F150 exhaust bolt nubs hell! You can put Rainman Ray and FORDBOSSME up there in the same greatness. They are my go to channels!
@@myfastcars I wouldn't put Rainman Ray on that same pedestal. He was alright when he was working for others but as soon as he started working for himself he went down hill. He complains way to much. Heaven forbid he gets oil on his hands. He complains he has no time to do maintenance on his own truck but he has plenty of time to add gauges and diff covers. I used to be a fan of his but not anymore.
On the railroad, the cutting torch is known as the "hot wrench." It's a huge help in replacing rusted track bolts.
Also on the railroad I used to work for, the gas powered hacksaw!
I grew up with my father's pipeline welding rig in the driveway. Your torch technique is excellent, and MIG work adequate to purpose (I have MIG welded piping for a Nuclear project) . Doing it all with bare hands makes my old burn scars throb, but you get away with it. Don't let the would be fire jockey comments bother you. Gloves and safety glasses are all I would add if I tried this job. Good Work.
Screw all those people. As a retired professional welder at a high level, your welds are fine. You are usually welding rust to new metal. Always a real joy!
,
I always come for the repair but stay for the commentary. Eric O. is the king of auto repair on CZcams. Thanks and Merry Christmas to you and yours.
He's top 5 for sure.
Agree 💯
Indeed
Mrs. O’s husband is the ultimate
Eric is a great mechanic if I’m ever in New York I’m definitely gonna look him up but what about Ray and Scotty they’re also great mechanics too watching these three guys videos is like watching the Three Stooges. You could never get enough and you can watch the reruns and enjoy them over and over again 👍❤️ merry Christmas everyone God bless you all in Jesus holy name, and have a happy new year… sending love and prayers and holiday. Cheers from Chicago another salt belt 👍❤️⛄️🎁🎅🎄
I also work in the rust belt and that's ehat separates mechanics from dipshits, Eric o is one of the best I know and I'm right up there with him and no I dont have to brag to know I'm better than most..... my work speaks for itself
Just a quick note that might make life a lil' bit easier. The confines, restricted access space makes MIG welding exhaust a PITA. Thought you should know that Tweco makes an adjustable/bendable replacement contact tube for MIG guns called the Knucklehead series making it a ton easier to wrap a weld bead around those hard to get to spots.
Thanks, I was wondering how others get away with that.
Damn.. I need one of these!
It is nice to know someone who can still use a cutting touch not just a sawzall and PB blaster.
I've been a mechanic for a few years now and I have to say your welding and cutting torch experience is Awesome. I'm a full time mechanic here in NC I've done some welding twice this week and I would be so embarrassed if I had taking pictures or even videos of the jobs I had done they were absolutely terrible. I've learned so much from watching your videos keep up the good work and Thank You for the hard and honest work that you do for our fellow Americans.
Welders do take it serious and if your work depends on it there is no good enough to pass muster. There's always competetion too. But I'll go out on a limb and say most critics haven't welding anything in thier life.
For a truck driven in the north east, the frame and undercarriage look really good.
It is a daily dirt road driver and a I plow with it
An ounce of prevention is worth a pound of cure, as they say.
Fluid film
Fluid film my 06 Tacoma every year and I live in southeast PA where the brine and salt are used. The frame is still original and looks great. Like Eric’s Tundra.
I never heard of fluid film until I started watching here. If we get a few inches of snow here in the South it's over. Snow plows??? Haha nope. Not here. We all just stay home and wait for the roads to melt 24 hours later
Wow, from Scotty Kilmer to Chris Fix to the Streets of Gold with an absence of rust, my whole day is covered.
I loved his dead-pan Scotty joke.
I was just waiting to see who else he was gonna work in! 😄
Power Age and ScannerDanner. And Pine Hollow Auto Diagnostics too!😁
We do this type of repair at my shop all the time! Great to see someone else doing it like we do. Whatever Toyota and Subaru use for exhaust pipe holds up good, but the flanges just turn into dust. By the way, that's an Autopart International muffler and we get them special order through Advance Auto. As far as I can tell they're the highest quality replacement exhaust out there. It's now my first choice for exhaust. Had way too many Tundras come back for Walker tailpipes that rusted off after a year or two.
Good info thanks
I've welded for 38 years and I will say your welds are perfect.. great work
Fluid film for the win.....lookin good after all those years
Just wanted to wish you all a Merry Christmas, and a great new year! I appreciate your video's and the learning experience you provide to us all. Your ability to explain what you are doing, while performing your repairs is a gift. Thanks!
Thank you very much for all the videos over all these years. So much entertainment and teaching, all for free. Even if "If I can do it, you can do it." does not always apply to me, I still learned enough to do more home wrenching on my car.
I wish you and yours a merry christmas and may your wishes be fulfilled.
Again, thanks for everything you do. It is very appreciated.
Greetings from Germany!
The title ALL of us were waiting for! 🤣
Next video title: “I’m getting sued by Toyota for saying this…. But I don’t care!” Then “My Last video before I quit CZcams” ….
@@RustyZipper Scotty will never quit, he's "quit" dozens of times.
@@tonebonebgky2 Which is one reason I don't watch him anymore. Clickbait, and his annoying voice, not to mention the waving hands. If he ever gets handcuffed by the cops, how will he be able to answer their questions?
Love how wifey walks in “is it done yet” no matter what you say the next line will always be “what’s taking so long” 😂 lol she wants to see Customer work being done 👍
NIce job! The videos you post on your channel are very informative, always learn something when I watch!
Not only are you a good mechanic you’re a good guy! Thanks for sharing your knowledge
Just for shoots and giggles, you should have soldered something just to complete the hat trick of introducing heat to influence metal in one video. Love your channel, Eric. It’s the best out there. Just keep doing what you’re doing!
Not sure if anyone else noticed, but Eric O shows the same care and attention to detail on his own vehicle(s) as he does anything else that comes through his doors. Truly a class act! Merry Christmas to Mr. and Mrs. O and all the O's!
My thoughts exactly. Dr and Mrs O are a class act💯👍🌲
The commentary on your vids is pure gold… keep doing what you are doing Mr. O.
I do want to say thank you to South main auto channel because I have learned a lot watching your channel. I am kinda new to automotive industry with only 2 years as a full time dealer auto service tech. I'm not sure how long I've been following you but I know it's been quite some time probably a couple of years maybe more but I quickly realized you have alot of knowledge and experience. So I subscribed and watch most of your videos trying to learn all i can.
Nice to see that you treat your own vehicle just the same as your customers' vehicles. 👍 Never ever seen you take a cheap shortcut. Just a very good and honest mechanic.
At the moment you said" come on baby light my fire " the video went to commercial and I couldn't be happier...
😁
Your torch work is very talented & seriously educational, great job as always...
Hi, Mr. and Mrs. O. I wish you a happy holiday season. I hope you are healthy and enjoy great times together. Thanks for sharing it with us.
Who would have thought that replacing a muffler and tailpipe you would be able to showcase your many skills from using your cutting torch to fitting the flanges and pulling your system tight with a ratchet strap , nice Eric as usual.
Cuttin' torch, heck yeah, efficient. Like other commenters, I don't use my torch as frequently as a whole lot of guys and the local supply house raised their prices about 500% for tank lease, so I bought them. That has worked out well. I think they have added gold molecules to the fuel and shielding gases as well as the price indicates something like that. They've also decided that every consumable, from tips, to gloves, to hammers, pliers, discs, everything, now gets a hazmat charge. I never realized soapstone markers were hazardous, didn't know mig tips and sharpies were hazardous, didn't know leather gloves were hazardous. How have we stayed alive for so long? 😉😉
Your welding and cutting skills are great. I have done some welding and cutting back in the day. You were dead on about developing those skills. Always enjoy your videos. Keep them coming and Happy New Eric.
Absolute nothing wrong with your welding..! Your the man who is able to turn their hand to anything. Been watching your videos for years now and still love them all.. Keep up the great work Sir.. Merry Christmas..! Al from Scotland 😎👍👏👏🎅
I love to see you bring out the torch, it gets the job done. Merry Christmas.
I think he oughta get a HyperTherm brand plasma cutter. But only because he's got too much money ;)
That was a dam fine Scotty imitation.
I could almost hear his testicle-less screech.
The flailing arms..lmao
Now scotty is gonna come after eric like he did chris fix.
@@lawnside82 Scotty will bring a knife to a gun fight.
I play Scotty vids at 1.5x and it makes him look like he could take flight. 😂
One of the only CZcamsrs I watch start to finish, thanks Eric O
First time here. You do awesome work and it's a pleasure to watch you use that torch. Every single time I use the torch on exhaust parts I make a mess of things and regret using it. You are a master of the art. Keep up the great work and thank you very much for sharing it with the rest of us. Merry Christmas and have a great New Year.
I suspect the torch issue is because the "youngsters" and those who grew up in dealerships haven't had ready access to torches. I'm just a DIYer and can't imagine not having "Vic".
as a youngster who doesn't have ready access to a torch i just sit there jealous.
Long time dealer tech here. It's weird where I'm at in Virginia because it wasn't as essential until about 10 years ago or so when the state started brining the roads before winter weather. Now I use them all the time. As far as the young people I've encountered lately, most of them can barely operate a screwdriver, so using a torch is going to be a hard sell for a while. I hope that's just an issue in my area and not everywhere. It's time for me to move into the independent world though.
I work at a dealership on Long Island and i use the torch weekly. Rusty cars need some extra motivation to come apart lol
@@crazyracinjason Try some farm boys (and girls) for productivity and knowledge.
As a fellow resident of NYS in the rust belt, Your comment on the torch could not be more true! It is an absolute necessity!! I think that its rare that I can do any car repair up here without using the torch. Great videos and I love your channel! Merry Christmas
your ability to handle a torch and welder to get the job done to your standards was terrific. keep up the great videos.
Man do you bring back memories! Started my wrenching career In Buffalo at Toyota and exhaust work was like brake work. Rust wins!! Bring on the blue flame wrench! After 6-7 years of that, moved south and wrenched another 30 here. Hardly touched another torch. Made more too! Merry Christmas to you and yours.
Excellent video! Nice to see Scott’s comment along with the Chris Fix reference. I was waiting for you to say Rays gravity when you dropped the bolts as well.
This is always as entertaining with your humor as it is informative with the repairs.
Love how organized you and your shop are.
Glad to see you're show again.
Mrs. O is the best supervisor. Making sure your working and doing it right!
I love your extreme welding excellence. I have never ever seen anyone weld as well as you do.
As a DIY'r, I own my torch setup. Leasing the tanks all year long to use it once or twice just didn't pencil out. A medium Miller/Smith torch setup, a 75cuft full acetylene tank, an 80cuft oxygen tank, and a cart set me back over $1000 several years ago. The upfront cost of leasing the tanks would have been lower, but at this point they're probably paying me back. There are cheaper ways to torch, but I like nice tools. 😉
Yep. Same for welding gases: it works out better for us DIY’ers in the long run to own the tanks outright and find a place that will fill them at a reasonable cost.
I had a set of tiny tanks used for hvac brazing I was using for automotive. Seems like I was constantly having them filled. Upgraded the garage to giant tanks on the cart and I haven't filled them since. Its time to refill though. I use mine a couple times a month, but without them I can't do the work. Well worth the $.
I always wanted a torch but could not justify the cost. Than one day I was driving along and someone was throwing out one of the small portable kit, ( tanks carry case gages the whole thing). The tanks were completely full.
Some jurisdictions won't allow you to own tanks as a diy or shop or dealership. The people that own them can't legally get them filled.
One draw back with torches is the cost of acetylene. The last time I had my small tank refilled (2 years ago) it was well over $100.
THanks for sharing your welds only have to not leak and stay until the tail pipe rots off looks good
Thanks for the video Eric, great torch work! Welds didn't look bad either! Years ago had a 74 Maverick, got pipes and mufflers from the Zone. I think I must have replaced a part of it every year. Had a stack of receipts so I very rarely paid for the parts. Got very handy cutting the inside pipe out with a hacksaw blade. Took some time but gotter done. Hope you and your family have a great and safe holiday.
You're the best mechanic, and only mechanic I watch. I love your channel, don't stop. Socal here!
The welds on those flanges are beautiful. I’m envious. Happy holidays!
Eric you just keep doing what you are doing it great I twisted wenches for sixty years and today I watch your videos about two hours a day I see nothing wrong with your work keep it up my friend
These are the greatest auto repair videos of all time. Merry Blessed Christmas to you and your family. No rust in Heaven for sure!
Damn. That took some serious skill. Great job Eric. I couldn't begin to imagine doing that without all of those honed skills
Eric, I think you do just fine with a torch. Most viewers don't know a time before cut-off saws, Sawzalls, stick, TIG & MIG welders, and a host of other modern tools. But there was a time, not so long ago when blacksmiths turned mechanics traveled with Oxyacetylene rigs to do both cutting and welding. And that was the only way to get things fixed! You made short work of your exhaust rebuild and I'm sure it will last! Merry Christmas and a Happy New Year to you and Mrs. O and family! 😁
No truer word spoken “I hate working on my own stuff “
love the videos and expertise!
I used the cutting torches while working all my career (34 years ) in similar conditions as you ( up here in Canada ) with road salt used on the roads . Its a must tool to have !
I'll tend to learn more from watching 10 minutes of this channel than an hour of listening to Scotty's opinions.
Have noticed your exceptional surgery skills with a torch in the past. My dad fixed rusty junk and farm trucks that lived on dirt roads to feed the family when I was a kid. He too used a torch all the time. Love watching a pro burn a 3/8 nut off an exhaust stud and the stud is still useable. Love your channel!
Just like Peter Hoeg's Ms Smilla, Eric O. has a feeling for steel.
Thanks for the video Eric, always great to see someone who knows what they're doing.
Hope you're well prepared for the cold front heading your way today.
Dang that "new" muffler looks like the rattle can special. Next time look into Ferrita exhausts for options. Full stainless that allows good flow, but not a lot of noise.
The rear coupling (marmon) flange isn't a bad style, they usually seal pretty well.
Thanks for your video of repairing your Tundra I appreciate your honesty and I think your welding skills are top notch. Hopefully the armchair welders approve if not too bad for them.
There's an old adage that the best mechanics own the most clapped-out cars. Speaking as someone that spends 40+ hours a week spinning wrenches, sometimes the last thing I want to do when I'm not on the clock is pick-up a wrench and turn it on my own pile of parts.
So very true, I think it's a combination of things though. One, we don't want to work on down time and two we tend to know if something is actually a big deal that needs to be repaired ASAP or if it can wait a bit and three, we know that the repair is likely to snowball....
We know how bad a car can get before it needs an actual repair.
Yeah, I'm guilty.
From Manitoba, Canada. I Use the torch alot. Heat and remove otherwise it break and the repair. Love how I can cut one layer and not touch the other layer on exhaust work. Keep up the good work. Merry Christmas!
Been using a torch and MIG welder for 50 years. Living in the Northeast, I don't know how one could work without them. One can develop some pretty good surgical skills over the years using these tools.
I lived for a few years in the North East (NH) and I realised quickly that rust doesn't worry about the badge on the front, or where a vehicle is made/assembled. It hits all metal very quickly.
Thanks for the video Eric O great job. I had to cut out a flange on my Subaru outback exhaust got the new one from Summit racing there was nothing left. 2011 284k. Merry Christmas and Happy New Year to you and your family ❤️❤️👍✅.
This is what I did about 3 years ago on my 2010 Tundra. Same time frame winter, mine was in January. I was driving and all of a sudden, the truck lost almost all power. I pulled into a gas station purchased some Ajax dish soap to add to the rubber hanger so I could remove the exhaust. Later I am going need to replace the flanges sometime soon as they are also very thin. I used one of the flange repair clamps to support the back of it for now. I also think the same thing about how Heaven will be like when working on my vehicles with rust. Everything dies here on earth; we are just seeking for ways to delay the inevitable here. I am very glad you shared you story and how you felt. I hope you and your family have a very Merry Christmas!!!
Love what work you do wish your shop was near me keep up the good work
Good job, Eric! Merry Christmas!
I had a muffle from Rock Auto that was stainless steel that looked just like that all banged up. I was like "heck no!!" I shipped it back, they shipped another one, and the new one was clean with no dents. I have been using Rock Auto for pretty much anything, great prices, and great service!!
After watching another outstanding video, I'm left exhausted! Merry Christmas to the O's at South Main Auto!
I have to agree with you, an Oxy/Acetylene setup is a very cost effective tool. I many cases there is literally few other choices that work so well... and yes finesse is required or things just melt or fuse together.
2:18 😂 FedEx guy chucks it of the back like it's a Christmas present. 😆thats so true man
Your confidence when welding assures me that you're a good welder!👨🏭
Eric! Love the truck! I have an older mid nineties Yota truck and I loves it! Luckily I do not live anywhere near the rust belt. Your the best brother. Thank you for all you do! 🛻
Nothing wrong with the welds as long as both parts are welded and no leaks it's a win win no matter what it looks like, Merry Christmas Mr,O and your family 🎄
That Miller 211 is a great machine for the average DIY person. It does cost more upfront for the machine but all I habe ever used is Miller. As soon as I'm able to thats the machine I'm going to order for myself.
Before I ask the question you already have the answer good job.
I think your personality is as great as your car crafting skills. Very enjoyable to watch. What I call car crafting/fabricating is becoming a lost art. So many youngsters just want everything to bolt on and if it doesn't or fit exactly they are lost. I started working on cars more than 50 years ago in my early teens. There was no internet or videos showing how to do things. I had a Chilton's book and we just figured out how to do things. I will bet as you age you'll find yourself using gloves more and more just as I have, Really helps with the cuts and burns.
Eric, you have no idea how much I love this video 😆🤣😂👏👏👏
Great video Eric .you truly are a master in what you do. Thank you for my evening entertainment.
Hey Scott, maybe you and Eric should do a video together. Good chance you could alienate ALL they armchair experts. 😁
Cutting torches in general are an absolute necessity . I was an electrician and we had torches in our shop.Kanda like a sledgehammer , you may not need it all the time but when you do it's nice to have. Makes a 30 minute job a 3 minute one.
Great video, thanks for recording. Merry Christmas!
I really enjoy your videos. A few comments on why...1) Just because you can do it, doesn't mean that I can. You are a skilled troubleshooter with tremendous patience. The backbone of our great country. And to think, we are paying six-figures-plus to a bunch of worthless Phd grads. 2) In a world where people don't change out of their PJs for the day, how Mrs O dresses is refreshing. Also love how the two of you interact. Classy! 3) Thanks for keeping the content G-rated....or can I just call it "respectable" . 4) You need not invest any of your time on the negative comments you receive. Those of us that are confident in who we are may see something we'd do differently, but have no urge to try to one-up you. More than likely, we'll try it your way the next time and make up our own minds. Merry Christmas to you and your family!
The old time muffler guys used them to cut the old off then gas welded the new pipes together-came out perfect every time!!
I don't know about the cutting torch comments, but it does impress me how you can cut a nut of a stud without damaging the threads. Hats off to you for that.
Hope you and your family keep safe from the snow storm eric.
I wish there were more people like you in the world it would be a far better place Merry Xmas to you and family !
Oh Lord!! My 2008 is on borrowed time. 😁
I put an aftermarket muffler on my Tundra about 12 years ago, and I’ve had zero problems. Flowmaster is a litttle throatier, but nothing that abuses my sensitive ears
Great video, you can tell when someone knows what they are doing. Trying to decide if I going to tackle it myself - same issue on a 2007 Tundra original exhaust!
Great looking welds Eric....very nicely done
Excellent work that you do aside, its so annoying when transport companies don't take care of items they are delivering. Merry Christmas Eric, Vanessa and family.
Wow that is beat up. I miss working in a shop where I can do exhaust jobs. I recently had to put a piece of pipe on my xj coz some crackhead stole my converter. Welding outside on the dirt in the wind was fun. The burning flesh smell brought back so many memories
i have some major minor exhaust work to do on an old old Corolla, what do you recommend
Love the channel mate I love the gas axe especially when doing exhaust jobs I would just say each to their own well done 👍🦘🇦🇺
I always had good luck with the Walker Dynomax Super Turbo mufflers. Had some on my fox body mustang and sounded and flowed great.
This is pretty good timing. I bought a Tundra because years ago Eric told me to in a youtube comment haha. Mine is leaking from the exact same flanges. Im not confident enough to weld them so I glooped it up good with some JB weld hoping to at least get me through the winter. Its quieter now only problem is I think the manifold is leaking as well. I can't even see the manifolds but it sounds like it and that job looks like a pain in the ass. I hope his manifolds leak so we get a video hahaha.