This is the best video I have seen of how to modify the slim line pros. You got to the point unlike all the other videos I have seen which just confused the hell out of me I am doing mine today just like that
Found out about your channel just the other day and I'm glad I did. I love how raw your opinion is and saw your video about the fast feeds really hit me. I'll tell you more on IG, i'll show you my progress with it.
fast feeds aren't upgrade from Master's.....even the name says so. I got Master's in barber school and found every reason to complain about them and spend money on clippers every chance I got.. a few years later, I don't know why, but I started using the masters for my tapers and it has been my go to clipper ever since for any texture, cut, or style. now all of the clippers I bought, for whatever reason I thought I needed to, sit In the closet, bag, or drawer....and I have over 4 pairs or masters, some fade masters, phat masters, and my cuts are better quicker and easier. try it. if you use red speed-o guides...you can use some wahls too and use the same guards as the masters to blend seamlessly between clippers.
I'd say masters r lit. But for a beginner trying to get a fade right the masters will heat up more than fast feeds. Both good I keep them on my line up .
Every video you make is helping me immensely. I appreciate it! I'm currently in barber school and have about 3 months left. I've learned a lot from you.
I love your videos man ! Great energy keep it the good work I’ve hopefully I’m the lucky one to get the fast feeds been wanting one since I started cutting hair 🙏🙏
I tagged you also can you make a video on how to modify and adjust the new t outliner they have rivet like bolts holding the arm now so I’m not sure if it’s able to modify for more power now would be helpful 🙏🙏
@@CZcamsBarberAcademy I appreciate that brother, But I'm asking you not to put in this 1, the clipper can go to some who needs it and might not have any. I have plenty of fastfeeds . so I'm sitting of for this one bro
I’m having a hard time with the with the screws tightening to hold the zero gap. I have plenty of clearance.... quick question while I’m at it.... could a gtx blade work properly on a gto trimmer?
I recommend following Ricardo the barber steps if you have 0 experience and do not want to break the plastic piece cause u gotta buy a whole brand new blade just for the piece
What's up @CZcams barber academy I adjusted and did everything you suggested in this video but my liners are still not hitting like yours. Any suggestions?? Let me know please bro I been at it for hours and can't get it going.
Dope tutorial but today I was cutting and it made a weird noise so I checked my trimmers took then apart and the metal clip that holds the little black box it broke, what could i do???!!!!???!???
The reason barbers skeleton Liners is for increased air flow To stop them from over heating To maximize the most use out One pair on many clients. Some Also drill small holes in the housing unit on top of skeleton To help.
@@CZcamsBarberAcademy getting the black piece to connect. I put a drop of glue and it held. But it doesn't work that well. BTW, I have some items to send you. Let me know where to send.
I’ve tried to 0 gap my slimline and either they bite or not close enough. I saw on amazon a tool to help 0 gap em. Do you think they are useful or worth it? I work at GC and do men’s/boys cuts/ fades 99% of the time (I’m near an Army base). Anyway, thanks for your videos and your help!
My trimmers dont sound as strong as yours. If I tighten the blade down too much, it sounds like it’s struggling. If I loosen it, the blade starts to wiggle. Any advise?
The real reason most skeleton Liners is it allows more air flow To prevent them getting hot fast Sme people even drill small holes In the housing unit.
@youtube barber academy Its been a little over a year since this video. Can you update on the slimline mod? Still think its a good idea? Any wear on motor?
What's up Eddie. I know your a busy man, but if possible I was wondering if you could give my son a shout out on a future video. His name is Brandon Isaiah Sexton. He's turning 2 yrs old in a couple weeks. We always watch your videos at night when I put him to bed. He'd really get a kick out of it. Just if you get time. Much appreciated brother. We're from Louisville Ky. Maybe one day we can make it to your shop for a cut if we're ever in your part of town
Keep grinding my dude I appreciate the content and that u actually respond to your fans and followers #barberlove and as always #stayphokissed and god bless from #phokisscuts
hey whats up bro love the content you put out brother. would you be able to do this for me? I had a guy try this for me but he messed it up and the blade does not sit right on the trimmer. Would really appreciate it and obviously i would compensate you for the service. ill send you all the parts and all i would need for you to do is to put the gtx blade on the slim line pro for me LMK brother Thanks Jon the Barber-
I honestly sold my fast feeds in school because I struggled with the bald fades. But yea would love to give it another shot with that ceramic blade! I’m @behindthebarber on IG
Video idea: How about a “barbers client horror story” talking about horrible clients you’ve had or seen. I see a lot of stylist/hairdressers do those videos. It could maybe even become multiple videos.. Side note: I look forward to learning about barbering but I don’t have anyone to practice on (school is too expensive for me right now with a pregnant wife and 1 year old) but hopefully I can practice on my first actual head this weekend and post it on Instagram 😂 insta: anthonyfnov90
Wassup boss been really wanting a pair but have been sketchy to do so cause they are difficult to zero gap them and with the recommendation of the ceramic blade still possible that it would pull hair but would definitely love a chance for a pair set right ig@peepsquitenice
Wassup bro I appreciate the content I hope I win these fastfeeds cuz my andis masters broke but goodluck to everyone but more luck for me lol and my name on Instagram is Jerry_officialx thanks
I’m going to barber college in January but I have been cutting my siblings , my friends and also my own hair for about a year now if I can win that clipper that’d be great IG: la_dasav !
CZcams Barber Academy thanks I appreciate that and I can’t wait until I start school I am more than ready to give it my all and then some. I appreciate the kind words and also want to thank you for going out of your way to make these videos for us, don’t know how much you hear this but we really do appreciate everything you do for us once again thanks ! #hopeiwin #fingerscrossed #goodluckeveryone
Thanks for all this awesome information!! I’m 22 yrs as a barber and your videos keep me inspired and motivated for the passion of being a barber.
And what is your I. G. Name?
This is the best video I have seen of how to modify the slim line pros. You got to the point unlike all the other videos I have seen which just confused the hell out of me I am doing mine today just like that
You are a beast Eddie , and a good teacher . Your skills are very helpful
Found out about your channel just the other day and I'm glad I did. I love how raw your opinion is and saw your video about the fast feeds really hit me. I'll tell you more on IG, i'll show you my progress with it.
@@CZcamsBarberAcademy check your DMs
I would love to own my first pair of Oster fast feeds it'll be my upgrade from the Masters I got for barber school
fast feeds aren't upgrade from Master's.....even the name says so. I got Master's in barber school and found every reason to complain about them and spend money on clippers every chance I got.. a few years later, I don't know why, but I started using the masters for my tapers and it has been my go to clipper ever since for any texture, cut, or style. now all of the clippers I bought, for whatever reason I thought I needed to, sit In the closet, bag, or drawer....and I have over 4 pairs or masters, some fade masters, phat masters, and my cuts are better quicker and easier. try it. if you use red speed-o guides...you can use some wahls too and use the same guards as the masters to blend seamlessly between clippers.
I'd say masters r lit. But for a beginner trying to get a fade right the masters will heat up more than fast feeds. Both good I keep them on my line up .
Every video you make is helping me immensely. I appreciate it! I'm currently in barber school and have about 3 months left. I've learned a lot from you.
Will def put them fast feeds to use for sure!!!
Dang you just thru those blades and I need a replacement lol
Been trying to get these down in Australia like the fast feeds
NEED THOSE FAST FEEDS
Keep these videos coming salute!!!!
Sick video. Didn’t even know this was possible
I luv the slimline pro li I might have to buy another pair and mod it
I love your videos man ! Great energy keep it the good work I’ve hopefully I’m the lucky one to get the fast feeds been wanting one since I started cutting hair 🙏🙏
I tagged you also can you make a video on how to modify and adjust the new t outliner they have rivet like bolts holding the arm now so I’m not sure if it’s able to modify for more power now would be helpful 🙏🙏
Followed your instructions good sir.
Keep the grind going👍
@@CZcamsBarberAcademy I appreciate that brother, But I'm asking you not to put in this 1, the clipper can go to some who needs it and might not have any. I have plenty of fastfeeds . so I'm sitting of for this one bro
Anytime, but more likely I will enter the next giveaway
I’m having a hard time with the with the screws tightening to hold the zero gap. I have plenty of clearance.... quick question while I’m at it.... could a gtx blade work properly on a gto trimmer?
I recommend following Ricardo the barber steps if you have 0 experience and do not want to break the plastic piece cause u gotta buy a whole brand new blade just for the piece
Thanks bro for modification instructions. Will you be doing a demo of the cordless fast feeds?
What's up @CZcams barber academy
I adjusted and did everything you suggested in this video but my liners are still not hitting like yours. Any suggestions?? Let me know please bro I been at it for hours and can't get it going.
Do you have to cut the skeleton? And if not what benefit do you get for cutting it
The Skelton allows more air flow
In them to prevent over heating
Some barbers drill small holes in
the housing unit to help as well.
Dope tutorial but today I was cutting and it made a weird noise so I checked my trimmers took then apart and the metal clip that holds the little black box it broke, what could i do???!!!!???!???
CZcams Barber Academy I actually bought a replacement part and what could I do to prevent it breaking again?!?
I've had the slimline pro. Now I have the gtx. The gtx is stronger motor in my opinion.
Awesome! So probably a dumb question but what does skeletoning do to the trimmer??
It is suppose to allow more
Air flow in the liners to
prevent them from heating
Up so fast.Some people drill
Holes in the housing unit as
Well...
Is it true that the slim line eventually won’t be powerful enough to have the gtx blade?
Should I zero gap my slimline pro li
Nice video 👌
Why is the clamp completely different on my Andis Slimline Pro li. Can anyone help?
what is the reason to have it skeleton it? will the blade cut just as good if i don't skeleton it?
I’m curious 2
The reason barbers skeleton
Liners is for increased air flow
To stop them from over heating
To maximize the most use out
One pair on many clients. Some
Also drill small holes in the
housing unit on top of skeleton
To help.
Where could I buy the clip? Mine broke off of one of my Slimlines
What’s the drill bit in mm?
What's the difference between gtx vs the slimline Pro Li-T-blade?
Thanks ..
Gtx blade is deep tooth!
Did the slimline pro give sharper lines when the blade was replaced to the gtx blade?
Can you easily change back to the original blade after making the mod?
I tried this...could not get it to work.
@@CZcamsBarberAcademy getting the black piece to connect. I put a drop of glue and it held. But it doesn't work that well. BTW, I have some items to send you. Let me know where to send.
I’ve tried to 0 gap my slimline and either they bite or not close enough. I saw on amazon a tool to help 0 gap em. Do you think they are useful or worth it? I work at GC and do men’s/boys cuts/ fades 99% of the time (I’m near an Army base). Anyway, thanks for your videos and your help!
My trimmers dont sound as strong as yours. If I tighten the blade down too much, it sounds like it’s struggling. If I loosen it, the blade starts to wiggle. Any advise?
One quick question how would you compare the Andis ceramic select cut to the Oster fast feeds?
Do u have to skeleton it ?
@@CZcamsBarberAcademy niice thank you 👊😎
The real reason most skeleton
Liners is it allows more air flow
To prevent them getting hot fast
Sme people even drill small holes
In the housing unit.
I broke my clip while doing this. Where can i get another one
Yo wat up homie it's staychrispy from ig. Let me try them fast feeds tho🙌🙌🙌
Are these supposed to be loud? Like louder than my wahl magic clips?
How to change that blades no idea
Isn’t the GTx more powerful than the slimline?
Yea
Can I get in even if I’m not in school yet? I’ll be starting in February
@youtube barber academy Its been a little over a year since this video. Can you update on the slimline mod? Still think its a good idea? Any wear on motor?
@@CZcamsBarberAcademy ok but if I already have slimlines and on a budget is it a good option? Thanks for the advice!
Do they hit better then cordless t outliner ?
Once they have the andis blade on
Them what is the difference between
Them and cordless andis?)
Ok you explained the question!
Yo can I put the gtx blade on styliner 2?
Wouldn't touch the plastic thing will rather drill the metal blade instead
What's up Eddie. I know your a busy man, but if possible I was wondering if you could give my son a shout out on a future video. His name is Brandon Isaiah Sexton. He's turning 2 yrs old in a couple weeks. We always watch your videos at night when I put him to bed. He'd really get a kick out of it. Just if you get time. Much appreciated brother. We're from Louisville Ky. Maybe one day we can make it to your shop for a cut if we're ever in your part of town
@@CZcamsBarberAcademy I sure will buddy. All the best to you and your family bro
Quick question. Can you leave it normal? Not make it skeleton after the mod?
I’m 15 and cut hair could that work?
Keep grinding my dude I appreciate the content and that u actually respond to your fans and followers #barberlove and as always #stayphokissed and god bless from #phokisscuts
That must use GTX blade,or can use GTO blade too?
Wahyu Black I modded it with grey t outliners. Only problem was it’s hard to get it zero gapped
👍🏼
Ig Barber.behn 👌🏻
Damn this means I don't need my andies T outliners anymore🤔🤨😩
You won’t need your gtx outliner
What if I don’t have IG
Had to pull out my old IG for this. Lol my SN is chonkyfire242 I tagged you. Thanks.
Will the blackout blade cut just as good or is the GTX Blade better?
Thanks for sharing your video.
@@CZcamsBarberAcademy Thanks for your reply. I thought same thing, blackout blade is just a regular blade blacked out.
hey whats up bro love the content you put out brother. would you be able to do this for me? I had a guy try this for me but he messed it up and the blade does not sit right on the trimmer. Would really appreciate it and obviously i would compensate you for the service. ill send you all the parts and all i would need for you to do is to put the gtx blade on the slim line pro for me
LMK brother
Thanks
Jon the Barber-
They sound mad loud
Hello...
Can you help me modify my slim line pro trimmers? I can pay you....
Did I win?
I honestly sold my fast feeds in school because I struggled with the bald fades. But yea would love to give it another shot with that ceramic blade! I’m @behindthebarber on IG
Video idea:
How about a “barbers client horror story” talking about horrible clients you’ve had or seen. I see a lot of stylist/hairdressers do those videos. It could maybe even become multiple videos..
Side note: I look forward to learning about barbering but I don’t have anyone to practice on (school is too expensive for me right now with a pregnant wife and 1 year old) but hopefully I can practice on my first actual head this weekend and post it on Instagram 😂 insta: anthonyfnov90
What’s your IG
Hope to get a chance to use those fast feeds. Keep of the great videos🙏🏽🔥 My ig is @becerra_blends hope to hear from you soon.
Wassup boss been really wanting a pair but have been sketchy to do so cause they are difficult to zero gap them and with the recommendation of the ceramic blade still possible that it would pull hair but would definitely love a chance for a pair set right ig@peepsquitenice
Ive been wanting to try the fast feeds out. I'm @johnblazethebarber205 on ig
I have commented and tagged you on instagram I’m doing it again @queenp_4532
Wassup bro I appreciate the content I hope I win these fastfeeds cuz my andis masters broke but goodluck to everyone but more luck for me lol and my name on Instagram is Jerry_officialx thanks
I’m going to barber college in January but I have been cutting my siblings , my friends and also my own hair for about a year now if I can win that clipper that’d be great
IG: la_dasav !
CZcams Barber Academy thanks I appreciate that and I can’t wait until I start school I am more than ready to give it my all and then some. I appreciate the kind words and also want to thank you for going out of your way to make these videos for us, don’t know how much you hear this but we really do appreciate everything you do for us once again thanks !
#hopeiwin #fingerscrossed #goodluckeveryone