In this video we get a new engine put together for the LML tow rig project and get it installed. So close to being fired up! --Check out my Instagram-- SketchyDA
Gotta watch using the oem hardware to bolt the csf radiator and intercooler together, the bolt hits the cooler and tries to make a hole before it tightens together
You better start pumping out some vids now that your down in Florida! Get that c10 running, probably won’t have the time working on kyles stuff, that’s gonna be a full time job with double overtime, the way he keeps breaking stuff.
Good job bro I have been following you since the turbo DA I love that you do different things I just wish you did more explaining on what your doing with the diesels for us noobs that get deals like you did here
I don't have a diesel, or a trunk, or care about them, but i really enjoy your videos man. Your explanations and communication to the camera are great. Not sure how serious you are about the channel but i think you should change up the intro.
This is a awesome video, great job, the oil cooler upgrade will a 2020 cooler also work it’s a l5p with minor differences, Gale banks said it bolts right up it sounds like you know from experience, I’m wandering cause I want to upgrade my lml as well.
Would really like your help on my 2005 LLY Duramax would like to do an engine replacement and upgrade on the new engine with parts that would last over a hundred thousand miles.. im down in tx!! I run a hot shot delivery service
Wyatt is back making videos with boostedboiz, I suspect an upcoming video here on his channel but for now check out the latest at boostedboiz because Wyatt has made some big changes....oh p.s. the truck made it to florida.
Damn came out on my Guzzi. Time went to fast with Hayden. See your still at it, looking real good. Good to have a stable tow rig, next a trailer? The money is always going out. Lol good job, keep at it.
Is there a way to oil prime duramax before the first initial start up? Go through oil galley plug? Anybody with suggestions would be greatly appreciated.
"What's going on guys?" One too many words, and only one correct. You say f*cking cheeseburgers right after anyways! I see a lot of MAHLE in this video. Is that sort of just the go to for aftermarket diesel components that don't suck? Gosh golly gee that's a huge intercooler, hah. Great work as always man. I gotta figure out how to get as much done as you.
I made a cp3 vs cp4 comparision video on my channel. Simply looking at it from an engineering perspective it's hard not to see a volutary lower service life
I work for Dmax and I build the Duramax. When we switched to the cp4 I remember Bosch coming in the plant. It was weird as nothing had happened on the street yet. At the time my job was unloading trucks that delivered our parts. They assigned me to assist the rep from Bosch. Well it turned out they lied to GM and Dmax as they designed it for European diesel not US. They said they had a quality issue at their plant that they were not sure if it got out of their plant and they wanted to check at ours to see. They refused to say what that was. I’ve been interviewed by GM attorneys over the lawsuit about that situation.
@@dmaxlife2785 @D Max Life Any injection pump that isn't made of steel internals isn't gonna last. ESPECIALLY at the high pressures diesels now work at. They knew exactly what they were doing. Every thing is worse on the pump. EVERYTHING. Not only it has a smaller surface area on the cam, but it goes 360 degree, it has no pressure lube on the shaft etc etc. Heres the video I made to illustrate and note the design changes leading to shorter life . czcams.com/video/uUu3XmOAWnI/video.html
Veikra I’m not denying that at all. Bosch flat out hid it and lied about the issue. Then customers start having problems and suddenly Bosch opened up about what they done.That is a main reason we no longer use Bosch and the patent for their common rail expired
Hey man did you end up doing a dingle berry ball hone on the engine and then just buffing the deck? I'm looking to do the same to my 320k mile engine. Runs great just want to make it last another 200k or more. I do get pressure on the upper hose but sometimes it takes a week other times it may take longer. Many tell me head gaskets but im not losing any coolant at all. Im lost on it tho, reason why I just want to refresh the lower end and let it bump
Upload so.e more videos bruh. 11k views out of 60k subs in 3 days. Not terrible. I know you day job takes up alot of time but I think if you incorporated sone of that then alot of people could relate
Wyatt deserves 10x this many subscribers.
He probably could have 10x more subscribers if he'd upload more frequently instead of every couple of months. You get out what you put in.
Maybe if he released more than one video a year he would have
Did you two coordinate that reply? Good work.
@@sjv6598 chill the guy does run his own business, It's not just for you guy..
David floener Shush fool.
The Integra needs a comeback. Its the reason why I used to watch your videos in the first place.
That car was sold a few years ago bro. Fyi
It’s nice to see a different build on CZcams that’s not an LS or K swap
go watch vargas brothers smash on some dorito's
Awesome video brother!
You and Hayden are my favorite F AGS.🍔
Very entertaining video.
Cant wait to see this thing ripping!! Awesome job Winston golly
Stocked on the move
He is back 🤟🏼
Gull damn son. Glad to see you back at it. You and Haden need to post more videos. Love the content.
Congratulations on your move hope it all goes well for you
Nicely done man
Great stuff can't hardly wait for the next video. 😁👍
Keep it up bro
Gotta watch using the oem hardware to bolt the csf radiator and intercooler together, the bolt hits the cooler and tries to make a hole before it tightens together
You lubed that cam shaft so well 😜😜😜
He’ll yeah bro u did a good job filming it was kool to see u rip apart Diesel engine and put it back together in a time lapse
Always enjoy your videos.
You can definitely tell this is the first one you have ever put together. Lol you make it look so easy great video as usual guy.
2 Trucks 1 Wyatt 👍
Good job Wyatt. Love the quality content and explanation. Cheers
Very happy to see you down in Florida! Hopefully you can learn some good youtube tactics from Kyle. Keep your videos coming as well!
Go see JH Diesel!
Cool! Subscribed after seeing you in Kyle's video. Looks like great content.
Need more video’s from you man!!.. you a coo as guy!!... make me laugh more!! Great work keep it coming!
You better start pumping out some vids now that your down in Florida! Get that c10 running, probably won’t have the time working on kyles stuff, that’s gonna be a full time job with double overtime, the way he keeps breaking stuff.
Nice vid bro, love the content.
CO TO FL is quite a change of scenery
Came for the og sketchy DA
Stayed for the fawkin cheeburgers
Great video as always Wit.
Weird doesn't look like I see an egr cooler 😉
It’s behind the condenser. It’s not very clean looking tho
The getting sh*t done to filming it ratio was good. Good bit of difference between an update video an a how to.
Great job! Can't wait to see it on the road.
YEEE YEEEEE support support 🙌🤝🤝
Keep the camera rolling Wyatt. It would be nice to see a weekly video even if you think it’s shit
Good work ol son
Love your videos Wyatt. Keep up the good work!
You deserve to be bigger
Good stuff Wyatt. Need to send my L5P to you for some tweaks.
Hell yeah lets go Wyatt, the content I’ve been waiting for ! 🤟
Here from Kyle's video and sub'ed
Great video, very underrated.
Hell yea boi florida man now eh
You’re not the only one who hates trying to get panel gaps even, which is why my cars always end up looking like ass😂
Finally a video though
Great work, just need more videos....
Great video bro, please keep it up you and Hayden !!!
Nice gaps.
love the videos keep them coming
Great video man. Hoping to see more vids. Always hustlin, Keep givin’ ‘er bud.
Good job bro I have been following you since the turbo DA I love that you do different things I just wish you did more explaining on what your doing with the diesels for us noobs that get deals like you did here
I don't have a diesel, or a trunk, or care about them, but i really enjoy your videos man. Your explanations and communication to the camera are great. Not sure how serious you are about the channel but i think you should change up the intro.
What you don't like fukin cheeseburgers man?
Finally
Hell ya
This is a awesome video, great job, the oil cooler upgrade will a 2020 cooler also work it’s a l5p with minor differences, Gale banks said it bolts right up it sounds like you know from experience, I’m wandering cause I want to upgrade my lml as well.
Would really like your help on my 2005 LLY Duramax would like to do an engine replacement and upgrade on the new engine with parts that would last over a hundred thousand miles.. im down in tx!! I run a hot shot delivery service
hell yeah i want some cheese burgers
Wyatt is back making videos with boostedboiz, I suspect an upcoming video here on his channel but for now check out the latest at boostedboiz because Wyatt has made some big changes....oh p.s. the truck made it to florida.
Time to update your intro add some truck burn outs and big diesel turbo rollen coal
👍👍from this guy
the intro, yall want some fucking cheese burgers, lmao
What music do you use in a lot of your videos, like the music used in the final LB7 race engine assembly video? Thanks
Damn came out on my Guzzi. Time went to fast with Hayden. See your still at it, looking real good. Good to have a stable tow rig, next a trailer? The money is always going out. Lol good job, keep at it.
🍔👍
Is there a way to oil prime duramax before the first initial start up? Go through oil galley plug? Anybody with suggestions would be greatly appreciated.
Yayyy. We made it to the gas station.
Did you build your engine stand or buy it
I want to see more on the XJ
Either sold or for sale. Don’t hold your breath
I’m wanting to do the oil cooler on my LMM to the L5P also. Where did you get yours and the part number please
Watching from Fresno California can u upload Lil more often Wyatt 👍
were the cylinders bores in good shape?
What kind of schooling did you do to learn all this stuff ? Or was it just hands on experience only lol
"What's going on guys?" One too many words, and only one correct. You say f*cking cheeseburgers right after anyways!
I see a lot of MAHLE in this video. Is that sort of just the go to for aftermarket diesel components that don't suck?
Gosh golly gee that's a huge intercooler, hah. Great work as always man. I gotta figure out how to get as much done as you.
Mahle is what we use to build the Duramax. It comes in unlabeled but the manifest has mahle on it.
@@dmaxlife2785 Oh cool
Do this means that you might make it to Cleetus and cars with the race truck?
I made a cp3 vs cp4 comparision video on my channel. Simply looking at it from an engineering perspective it's hard not to see a volutary lower service life
I work for Dmax and I build the Duramax. When we switched to the cp4 I remember Bosch coming in the plant. It was weird as nothing had happened on the street yet. At the time my job was unloading trucks that delivered our parts. They assigned me to assist the rep from Bosch. Well it turned out they lied to GM and Dmax as they designed it for European diesel not US. They said they had a quality issue at their plant that they were not sure if it got out of their plant and they wanted to check at ours to see. They refused to say what that was. I’ve been interviewed by GM attorneys over the lawsuit about that situation.
@@dmaxlife2785 @D Max Life Any injection pump that isn't made of steel internals isn't gonna last. ESPECIALLY at the high pressures diesels now work at. They knew exactly what they were doing. Every thing is worse on the pump. EVERYTHING. Not only it has a smaller surface area on the cam, but it goes 360 degree, it has no pressure lube on the shaft etc etc. Heres the video I made to illustrate and note the design changes leading to shorter life . czcams.com/video/uUu3XmOAWnI/video.html
Veikra I’m not denying that at all. Bosch flat out hid it and lied about the issue. Then customers start having problems and suddenly Bosch opened up about what they done.That is a main reason we no longer use Bosch and the patent for their common rail expired
What killed the motor originally?
Hey man did you end up doing a dingle berry ball hone on the engine and then just buffing the deck? I'm looking to do the same to my 320k mile engine. Runs great just want to make it last another 200k or more. I do get pressure on the upper hose but sometimes it takes a week other times it may take longer. Many tell me head gaskets but im not losing any coolant at all. Im lost on it tho, reason why I just want to refresh the lower end and let it bump
Hey where is that Florida video tho. 🤷
Is there a particular reason to put each rod/piston in and torque individually instead of putting them all in and then torquing the set?
I do it like him so I’m sure they are torque. I have enough distractions at home that I can see me missing a rod bolt and ruining a new build.
I know nothing about diesel engines but is honing the cylinders not needed?
Well touch more on that an the end of the video. He says that 4 times lol
And never does but it's all good to me..
Do you still have the jeep
Nice work! Did u use the ARP head bolts?
i'm not sorry i called you fat, but i am pumped your a florida man now, cool as hell, gave you a sub, no homo from the land of burnouts
Damn early ass upload
What would you charge for this setup. Lmm
1 view, 4 thumbs up!
Comment! LOL 😂
Jo where them cheeeeese burggggers?? 😄😄
Upload so.e more videos bruh. 11k views out of 60k subs in 3 days. Not terrible. I know you day job takes up alot of time but I think if you incorporated sone of that then alot of people could relate
Do you use otto insurance lol
Being a GMC it's the rig you're supposed to tow, not tow with.
So a chevy emblem will make it all better then.
I'll take some fucking cheese burgers
Lol u Literally just rebuilt the whole engine and building another one
Love the content but damn don’t put politics in your ads Biden ad 🤮
I mean if you would have just bought a Ford you wouldn't have had to do any of that.... Trolololol.
You must be a stand up comedian!!
Your voice is putting me to sleep