Making a 2400 meters LONG RANGE 8-Channel & Digital Trim Radio Control For RC Models. PART-2

How to make long range remote control with 100mW NRF24L01 PA LN (E01-ML01DP5) 2.4Ghz module and Arduino.
If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
CZcams JOIN: www.youtube.com/@Kendin-Yap/join
Necessary materials:
2 x PS4 Analogue Joystick (10K) : s.click.aliexpress.com/e/_DBS...
2 x Toggle switch: s.click.aliexpress.com/e/_DCd...
2 x 100mW NRF24L01 PA LN (E01-ML01DP5): s.click.aliexpress.com/e/_DmE...
2 x Arduino Nano: s.click.aliexpress.com/e/_Dlh...
2 x NRF24 wireless 3.3v adaptor: s.click.aliexpress.com/e/_Dlm...
2 x 100uF (16V or above) electrolytic capacitors : s.click.aliexpress.com/e/_DBJ...
4 x Female Header Pin (15 pins): s.click.aliexpress.com/e/_DDq...
2 x 10K potantiometer: s.click.aliexpress.com/e/_DCV...
Universal PCB board: s.click.aliexpress.com/e/_DF8...
AA Pil Kutusu (6xAA Cells) : s.click.aliexpress.com/e/_DFM...
veya 18650 pil kutusu : s.click.aliexpress.com/e/_DER...
5mm LED: s.click.aliexpress.com/e/_DB6...
330R Direnç: s.click.aliexpress.com/e/_DFk...
Rocker buton (10x15mm): s.click.aliexpress.com/e/_DDv...
Tact buton (6x6x7): s.click.aliexpress.com/e/_Dm2...
Screws: s.click.aliexpress.com/e/_DEv...
Heat-Shrink: s.click.aliexpress.com/e/_DnM...
26AWG cable: s.click.aliexpress.com/e/_DCR...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
DIAGRAMS & CODES: www.rcpano.net/2022/10/30/mak...
OR tinyurl.com/49treus3
PART-1 Video: • Making a Long Range Re...
Radio Box 3D STL Files: drive.google.com/file/d/1DkdL...
My Website (KendinYap): www.rcpano.net
Required materials for regulators:
1uF electrolytic capacitors : s.click.aliexpress.com/e/_DDV...
10uF electrolytic capacitors: s.click.aliexpress.com/e/_Ddf...
100nF ceramic capacitor: s.click.aliexpress.com/e/_DmU...
7805 5V Regulator IC: s.click.aliexpress.com/e/_DDv...
7809 9V Regulator IC: s.click.aliexpress.com/e/_DlX...
80W soldering iron: s.click.aliexpress.com/e/_DD7...
Digital Multimetre AC DC A830L : s.click.aliexpress.com/e/_Dmj...
Digital Multimetre AC DC ANENG XL830L : s.click.aliexpress.com/e/_DEJ...
UT61 Profesyonel Digital Multimetre Tester: s.click.aliexpress.com/e/_Dmt...
My website: www.rcpano.net
#DiyRC #DiyArduinoRC
Thank you for watching. Please Share, Like and Subscribe for More Amazing Videos.
All of my videos: / kendinyap-video

[@JannieH]

Simply incredible how far electronics have advanced in the last 40 yrs. Back in the 80's I built a six channel on the old 27Mhz band. The receiver was most daunting. True AM super heterodyne technology, hand turned pick-up coils with 455Khz IF coils. Miracle to have got it working at all. Well done on this very well presented project...Brilliant.

[@orange_tweleve]

Hand tuned couls , rhat truly something tbh

[@yaminsiddiqui4690]

legend

[@paradiselost9946]

im fiddlinga round with a project retro build... 50s style.
a motor driven PWM? the tX is the easy bit actually... just CW.

[@dubab.249]

I remember those times, it was enthusiasm and not this today, you type in your laptop and you're done.

[@ashwinrawat9622]

Hi, where can I find design for such a thing? I would love to build something like that.

[@trentsuveges7622]

Dang that's gotta be the coolest thing I've seen ever!

[@antonisvianos8017]

Till now have made 6ch control, drone, retracts, rc airplane all work perfect. With few words Kendin is MASTER!!!!!!!!!

[@brianparisien9262]

Fantastic! I've been looking for something like this for a long time! Many thanks for your generosity and sharing.

[@maraqltv7748]

mini bayraktar lan adam. hela olsun abi !

[@knightflyer909]

Excellent range test! The best I have seen yet. Thank you.

[@marcofe82]

Hi, it's absolute impressive what you've done! I can't imagine how much effort you spent in this!Stunning!Lastly, Thank you so much to have shared this project!

[@jonoyb4721]

Purely awesome! Amazing skills! Congratulations!

[@Jabanoflier]

Awsome build. Great flight too.

[@333donutboy]

This is going on my "project list". I subbed because I'm looking forward to more content. Thanks!

[@benjaminjohnson6476]

Very nice. Seems like a cool project to do. Love you're content type. Keep it up!

[@dudkipl2802]

amazing. perfect for anyone who has time and doesnt want to waste money on an expensive RX and TX

[@mmtechchannel8002]

It's really amazing. It has a really long range. This distance is enough for me

[@rctruckjp]

Me encanta sus proyectos. Quisiera aprender más de usted. Me toca meter el esfuerzo para lograrlo pero con sus videos tengo guía para lograrlo. Saludos desde Colombia. Sigue así mi hermano.

[@senoltetik6709]

bende devamını bekliyordum bu işe gönülvermeye hazır ama maddi yetersizlikleri dolayısı ile başlamayan yeni nesil için çare olmuşsunuz .teşekkürler.

[@haydensuperville1967]

Brilliant and Extrodinary Work......Masterful Indeed!!

[@MehmetSutas]

Mükemmel bir proje olmuş. Elinize sağlık.

[@surveyengineer2372]

Hocam helal olsun. Diyecek söz bulamıyorum artık.

[@juliocesarvelandia3386]

Muy elaborado, de principio a fin.
Total: Una obra de arte.
Y para hacerlo, hay que saber si o SI.

[@weareelectricgi]

very cool and very clean build. awesome 👍

[@stargazer279]

im glad i found your channel, i will be able to build some projects with your videos as reference

Harika bir maker örneği olmuş hocam, ellerine sağlık

[@kuro1803]

coolest thing i eve seen today

[@beytullahaztekinn]

This project is wonderful.

[@pcantele]

Wonderful job!👍

[@g.p.7880]

Nice 3d model 👌👌👌

[@ismailmercan5393]

Mükemmel ötesi bir çalışma emeğinize sağlık 👏👏👏

[@hadibiseyleryapalm2870]

Mükemmel olmuş. Kaliteli içerikler için teşekkür ederim.

[@khaleedan]

Well done mam really unbelievable ❤❤❤❤

[@josefix1987]

Thank you so much for this educational video, I learned so much.

[@mehmetalikocaslan5152]

Elinize emeğinize sağlık. Çok güzel bir proje olmuş. çalışmalarınızda kolaylıklar dilerim.

[@allengentz7572]

Thank you for sharing this project well explained and would be an excellent challenge for me.

[@StyleTechnique]

Allah razı olsun, bu projelerinizi bizimle paylaştığınız! Çok sağolun!

2. videoda geldi. Gerçekten güzel çalışma olmuş. Emeğinize sağlık.

[@mckone9]

Eline sağlık hocam. Good job

[@EdgarMorales-vw2wr]

Good JOB CONGRATS!!!

[@berkaykara1255]

Hocam çok güzel çalışmışsın tebrik ediyorum 🥹👏👏

[@mrwaqas6208]

Thank you so much to have shared this project🥰🥰

[@varunkulkarni3240]

very nice projects, watched all videos, nice keep it up 👍

[@zahidhamood6079]

Outstanding sir... One the best video... Appreciated 👉💯💯❤️

[@umitbaba5690]

Really amazing buddy, I don't know what to say, amazing! I will make too

[@user-ld2mv2hr6r]

Thank you.
I'm jealous of your skills

[@frankdearr2772]

great topic, thanks 👍

[@slowpasha]

Abi sen napıyon ya, işi baya ileriye almışın reis 😂👍

[@c.n.palanivelrajan6080]

Thank you for awesome and incredible idea

[@skatehero7703]

Harika olmuş. Emeğinize sağlık.

[@IzergilBaba]

It would be interesting to try the same project, but with the ESP32 with external antennas connected through the ESP-Now protocol in Long-Range mode. The price range will be the same, and ESP32 can be programmed in Arduino IDE. Also, the weight of the receiver can be reduced using some tiny ESP32-C3 modules, such as Seeeduino.

[@drumbum7999]

no.

[@downey2294]

how would that work?

[@nickoyumicko7954]

Thnaks for your sharing , good job 👍

[@tekosis1]

Elinize sağlık çok güzel çalışma.

[@aliseref9767]

Çok güzel bir çalışma olmuş, ellerinize sağlık.

[@Krash_fpv]

Very nice build quality....I really want to learn Arduino....time to start studying

[@isaacluz7398]

Professor muito bom. Já sou seu fã. Obrigado por compartilhar seu conhecimento. Saúde, obrigado.

[@SrunEmpire]

Nice and love your content

[@motivational67624]

very good 🎉🎉🎉

[@isayildiz6478]

Çok güzel bir çalışma olmuş tebrikler

[@deneyselhobi9333]

Hocam ellerinize sağlık Çok güzel bir çalışma olmuş tebrikler

[@wallaguest1]

looking great

[@fluffyflunk]

Nicely done. Simply beautiful. I'm very tempted building one for myself even though I don't need it since I'm blessed with the TX16S.

[@anthony3D]

Bon travail 😎👍

[@dobo1980]

When changing the channel inversion to control the servo, I noticed that there was an error in the assignment of channels to pins.
Namely, the A3 NANO CH4 pin of the transmitter controls the D0 (RX) pin of the ATmega328P-PU_DIP CH1 of the receiver.
It is similar with A1 - CH2 of the transmitter, and on the receiver it is CH3 - D3.
TRIM in the transmitter works well for me.
I haven't changed anything in the code, the pins are assigned as in the shared code.
How and where can this be fixed?

[@Lukenukkem]

Nice work. I may have taken the time to etch out my own circuit board.

[@qqpp6017]

Thank you for the good video. ^^

[@adalante35]

çok güzel bir çalışma olmuş elinize sağlık

[@dz-abouttechnique1849]

Nice video!

[@conorstewart2214]

For the Transmitter you don’t need to connect power and ground to the switches, you can just use the internal pull-up or pulldown internal resistors.

[@onebreh]

it changes the behaviour of the pot. For linear input you need to connect power and grund too.

[@conorstewart2214]

@@onebreh I know how a pot works, I am on about the toggle switches which they connected to both power and ground, they are connected directly to a digital pin, they have nothing to do with the pots and for switches you only need to connect it to either power or ground, not both, and use either pull up or pull down resistors which are present in the arduinos digital pins.
Also pots don’t need to be linear, you get logarithmic pots too.
Edit: see how they did the buttons, they can do the switches like that too with only 2 wires.

[@JaydenLawson]

Was hoping that you would build the vTX system too! That's what I'm most interested in

[@conorstewart2214]

VTXs are very complex devices, they are far beyond what a hobbyist can do, just like most kinds of radio control, including the modules used in this video, they just use off the shelf radio modules they didn’t design them themselves. Video in general is a lot more difficult to work with and in drones or robotics they usually just take the camera and connect it to a VTX sometimes through an OSD chip.

[@hassenfit2589]

You are genius Bro

[@arunsasidharan2577]

Simply awesome. Can you make a auto pilot too?? That would be great 👍

[@kemalylmam8684]

On numara beş yıldız...

[@jefersonmedeiros7677]

Very nice !

[@paimo27]

This is very awesome project

[@EDITZKING2012]

Yes

[@rckhmer6780]

ល្អណាស់😊😊❤❤

[@KHALED-sk5cu]

Amazing bro.. 👌

[@karangupta4978]

I'm gonna attempt this built this summer... wish me luck guys.

[@alexanderrodriguez9434]

Hola amigo excelente proyecto

[@gauravkhanekar3924]

Really Awesome man...😍🌹👌🏻
Can you make this Tx with some more extra Channels and Colour touch display like professional Tx16s.
With different kind of RC model selections, and custom starup Logo and custom startup audio and other audio for mode selection.
Thank you...😃🌹

[@OMNI_INFINITY]

Thanks!

[@user-gf7qo7lm9y]

Hi @KendinYap, I have a question. I already made the transmitter and the receiver you showed in the video, but there is a problem. The transmitter sends signals(printing values in serial monitor), but the receiver does not receive them. The receiver POW and RX LEDs are on, but the transmitter LEDs - L and TX are shining very weakly. What can I do to fix this problem? Thanks a lot! :D

[@jozefnovak7750]

Super!

[@AlioshNeira]

awesome!!!

[@davidepiccini9254]

Wow comgratulation

[@amir.mahfoozi]

This is a rival to the Bayraktar TB2 😁

[@EmreYasinAlbayrak]

İstanbul model uçak klübünün pisti. Bir gün bu tarz işler yapan insanlarla tanışmak için oraya gittim fakat üye olmayan giremez diyerek içeri almadılar.

[@ioannisbatas1614]

Superb !!!

[@xxlalbatross3287]

Excellent

[@jasonhayward6965]

useful stuff

[@bulenboncuk426]

vidio kaçırmışım bügüm karşıma çıktı son derece ınanılmaz güzel 👍👍

[@rocgravillon9858]

Great !
a little advice: the on/off switch is poorly placed (under the palm of the hand) it would be good to move it (at the top for example)
Congratulations

[@SchwanaCARDHUT]

MERCI ET BRAVO 👏 👏 ...............

[@rajeshpenta7735]

Veri nice 👍👍👍

[@ardacoskun481]

Türkiyedeki alışveriş sitelerinden malzemeleri aldığınız zaman 750 tl tutuyor ( kapsız) fiyatı tutuyor. ardiunosuz 430 tl tutuyor.güvenilir sitelerde kumanda 2000 tlden satılıyor. paranız varsa direkt kumanda alın geçin ama paranız yoksa aradaki farkla batarya sarj aletini almaya yetecek kadar para var.

[@mairoadangarciaaza3504]

Thanks a lot

[@mohammadnazmi6146]

خیلی خلی عالی بود

[@webspiderc]

so cool

[@kctech1090]

Not bad not bad !

[@user-su4ln3nq7q]

이건 뭐 봐도 못만들겠다...진짜 대단하네 ㅎㅎ
수신기 만드는 방법도 있나요?

[@emrekayax07]

That s Great

[@NightBlue17]

2.4 km menzil çok başarılı.

[@turkalpkucur]

perfect

[@goodday92]

it's good idea 👍 😅