How To Make Amazing Stable RC Plane With Handmade RC. Long Flight Time
Vložit
- čas přidán 18. 04. 2023
- How to make a model airplane. Materiels Stryfoam and Foamboard.
It is a complete trainer model with long flight time, stable flight, short take-off distance.
Necessary Materials:
2212 980-1000KV Brushless Motor: s.click.aliexpress.com/e/_Dlo... OR s.click.aliexpress.com/e/_DFa... OR s.click.aliexpress.com/e/_Ddc...
9x6 propellers: s.click.aliexpress.com/e/_Ddl...
30A Brushless ESC: s.click.aliexpress.com/e/_DED... OR s.click.aliexpress.com/e/_DCg... OR s.click.aliexpress.com/e/_Dej...
LiPo Battery 11.1V 2200mAh: s.click.aliexpress.com/e/_DET...
D57mm wheel (2 pcs): s.click.aliexpress.com/e/_DcR...
D30mm Wheel: s.click.aliexpress.com/e/_DcR...
Control horns (4 pcs): s.click.aliexpress.com/e/_DDC...
Micro servos (4 pcs): s.click.aliexpress.com/e/_DlZ... OR s.click.aliexpress.com/e/_DcI... OR s.click.aliexpress.com/e/_DEj...
Gold Connectors 3.5mm: s.click.aliexpress.com/e/_Dmx...
Wheel stopper: s.click.aliexpress.com/e/_DCc...
Y extension cable: s.click.aliexpress.com/e/_Deg...
Adjustable Linkage stopper (Easy Link): s.click.aliexpress.com/e/_Dkv...
Pushrods: s.click.aliexpress.com/e/_DFa...
Canopy Hatch Lock : s.click.aliexpress.com/e/_DE3...
Fiber Strips Adhesive Tape (25mm): s.click.aliexpress.com/e/_DlM...
Fastener strip : s.click.aliexpress.com/e/_DnN...
Screws (M2.2-2.3) : s.click.aliexpress.com/e/_DEv...
M3x30mm screws : s.click.aliexpress.com/e/_DCB...
5mm Kraft Foamboard (1 plate)
3mm insulation foam (1 plate)
6mm insulation foam (1 plate)
Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw...
Hot melt Glue Gun: s.click.aliexpress.com/e/_Dln... OR
s.click.aliexpress.com/e/_DnD... OR s.click.aliexpress.com/e/_Dl2...
If you don't want to use handmade RC:
4 or 6 channel radio control system: s.click.aliexpress.com/e/_Ddu... OR s.click.aliexpress.com/e/_DCP...
Some of the shops that sell Kraft Foam Board:
www.amazon.in/Pacon-Water-Res...
pacon.com/board-480/water-res...
tinyurl.com/4ups272k
www.foamboard.shop/en/foamboa...
www.enasco.com/p/Pacon-Water-...
www.mwmaterialsworld.com/es/p...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
DIAGRAMS and DETAILS: shorturl.at/hiFP0
Landing Gear 3D File: shorturl.at/bCDIN
Making Handmade Radio Control Video: • Making a 2400 meters L...
Technicial Specifications:
Lenght: 73 cm (28.74 inc)
Wing span: 109 cm (42.91 inc)
Flight weight: About 675 gr
Center of gravity: 4.9-5.5cm from the front of the wing
Required control system: Min. 4 channels, 4 micro servos
Suitable battery: 11.1V 2200Mah (Max 2700maH)
Suitable motor: 2212 Brushless Motor (980-1400KV)
Suitable propeller: 2 Blade 9x6 (9060)
Flight Time: Approximately 30 minutes for an average gas level of 38%
Wing area: 1976 cm2
Vbar: 0.46
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
#rcairplanes
#modelairplane - Jak na to + styl
I've been building simple DIY rc airplanes for the past year after buying expensive airframes from major brands for big money. My most common design is a simple wing and tail attached to a carbon arrow from Walmart, without electronics $6.00 total and E-flight just came out with the "slow stick" that is a carbon copy of my design for $200. I have to say I enjoy flying my budget builds way more then an over priced $400 foam warbird any day. Once you understand the basic principles of airfoil design the sky is the limit...... Pun intended.....kind of lol. Warm up the glue gun grab a few sheets of foam board from the dollar store and cut, sand and glue until you have something that looks like an airplane and send it 👍 if it doesn't fly do a little more research and try it again. I was at the park maybe 7 times until one of mine finally flew and that is a great feeling.
Slow stick has been a design in RC for many many years!
@@beargillium2369 sorry
@@jordancoleman2402 doesnt make you a bad engineer though! you reinvented the wheel without knowing it existed!
@@macandfries6765 I'm a shit engineer 🤣
Smooth Take-off & Landing, what a masterpiece there...
Very good looking plane. Looks almost store bought. Flies great!
Kendin I think you've finally made something I think I can build too. I've been wanting to get into the RC hobby for over 55 years... and it's time! Thank you for this video!
I have waited 66 years. BUT none of these supplies are available in the small African country I live in. So never will it happen I think.
Haha this comment gave me a good laugh. “KendinYap” means do it yourself in Turkish and Kendin means yourself… It’s not his name. Good luck getting into the hobby though
@hendrikdebruin4012 None of these parts are available in the rich European country I live in. Have you looked online?
Lo hace parecer tan fácil, yo arme uno de sus modelos y lleva bastante tiempo y dedicación, mis felicitaciones por cada uno de sus videos.
great it seems to be super stable in flight great for beginners. I am also building a high wing at the moment (the Stinson SR9 see on the channel) I hope it will fly as well as this one
awsome.i have built and flew rc for a long time.this was a awsome vidieo.thank you
Great video, I've been waiting to see your homemade controller and receiver in use and it was worth the wait, I love your videos.
May you make a build using packing foam from appliances. Again great content man :)
Nispeten kolay bulunan malzemelerle yapabileceğimiz ürünler ortaya koymak,,
izleyici açısından daha anlamlı. Teşekkürler.
Thank u sir ..... thanks a lot .... we need more such cool long flight time build
POR ESO ESTOY SUSCRITO A TU CANAL, NO HACE FALTA UN MODELO COMPLICADO PARA QUE VUELE PERFECTO, SOLO HACE FALTA HACER BIEN LAS COSAS. CON UN MODELO BASICO HAS CONSEGUIDO UN GRAN VUELO CON MUCHA PERFECCION. UN ABRAZO Y ESPERO CON IMPACIENCIA EL SIGUIENTE VIDEO
So neat clean any beginners can easily learn better and faster..Many Thanks Sir..Hope to see some more..God Bless you Sir
It really is a 1-day build, I'll go ahead and try it ;D
Very nice.
I'm going to follow your plan and try it myself. Thank you very much. 👍
şimdiye kadar gördüğüm en mükemmel kanal teşekkür ederiz ve özellikle bu kadar yabancı izleyicin olmasına ragmen türkçe olarak da bize yardım ettiğin için minnetarım
So cool project 👍👍👍❤
Хорошо управляется самолётом ещё и без полётного контроллера.
The king is back! Abi bekliyoruz videolarını devam!
Bende diyorum neden bu videoyu daha önce görmedim meyerm yeni paylaşmış koca yürekli abim ❤
Great video, this is amazing 👌
Yine harika bir video 👍
Excellent content..👌👍👍
Beautiful airplane, congratulations for your great channel, tutorials and airplane designs. This aircraft seems to fly amazingly, long flight time and manoeuvrability so I decided to start my foam airplanes building experience with this.
Here in Chile there is no depron or any type of naked foam for the wing, only carboard with foam core so I think that might be a little heavy at last, I will report the result. I'm about to start the rear gear but there's some data missing, can you please share some of them, especially the rear landing gear geometry and measures?
Wonderful content❤️
El becerisi ustam. Ben de size özenip daha önceki videolarınızdaki gibi bir trainer yaptım ama 30 metre uçtu😂. Bu işte denge ve el becerisi çok önemli.
Hepimizin için geçerli... Uçurmayı öğrenmek bir süreç.
Superb !!!
Very nice 👍
Gotta build me one of these! 😝😝😁🤪🤣👍👍🇺🇲
Hocam elinize sağlık, aileronu kontrol eden servolari aileronlarin merkezlerinin hizalarına koyarsanız daha iyi olur, kolay gelsin.
Hi. I am building myself one this weekend😀😀👍🛩️
Very nice work, Sir.
Will the 3d printed landing gear work with the DIY Trainer plane from 2020?
Ellerine sağlık
hello, great video. hey can you put a mix channel on the homemade radio control?
reis tb2 filan yapsana modelini güzel olur bence hem reklam değeride var ;)
🎉Felicitaciones desde Uruguay. Al fin un avión que vuela como un aeromodelo y no como un avión que va colgado de la hélice y la potencia del motor. Un placer ver volar ese avión. Aaaaaa a y gracias por compartir los planos.
Haha. My brother and I did this in the very early 1970's. He built the planes. I built the radios. It was a little more involved than this :-)
an awesome build - congrats. I like your approach of building stuff out of easily available and affordable materials. Where are you located?
Nice video. Been watching a lot of your videos on how to make planes and controllers. How do you determine where the front landing gear should be placed? I'm thinking they get placed at the center of gravity position.
It wouldn't be good to consider the center of gravity for back wheel models. Because the nose of the plane will move downwards during landing and take off and the propeller will hit the ground. I usually place under the leading edge of wing. That is further from the center of gravity.
@@Kendin-Yap Thank you. That will definitely help me in placing them properly.
If you made a kit of it for sale, I would buy one! :)
1st ❤
Excellent video! Where do you get the motor to propeller adapter?
Merhabalar elinize sağlık. Ağırlık merkezi videoda mm cinsinden yazılmış galiba cm olacaktı . Takibe devam 💯
alet aşırı dengeli... hocam 2.5 mt kanat açıklığı olan bir çalışma yaptınızmı yada yapmayı düşünürmüsünüz?
Tebrikler. Yine güzel bir proje. Peki önceki uçaklardan farkı nedir kararlı uçuş için?
Önceki trainerdan bir kaç farkı var. Bu modelin gövdeye oranla kanadı çok daha uzun ve dolayısıyla kanat alanı çok daha fazla. Yatay stabilize (elevatör) çok daha büyük. Ve kanat köpükten yapıldığı için boyutlarına oranla çok daha hafif. Tüm bunlar bir araya gelince hem daha kararlı bir uçuş hem de daha uzun uçuş süresi sağlıyor.
I didn't understand the size of the wing before you cut it and the size of the two layers. And can I use 5mm foam board for two layers?
That is a wonderful stable aircraft! Would love to be in contact with you to exchange project ideas.
Can I cut half the depth of the wing and make the winglet move without having to glue the winglet with adhesive because I do not have adhesive?
I will use a long spiral piece to connect two separate wings, but the question is: How will I build the wing elevation angle when I have two wings connected by a long spiral piece? What are the alternatives to using such an angle that gives stable flight? For your information, I am a beginner in flying, but there is a friend of mine who made a plane with two separate wings and connected them with a spiral piece, but I did not. Use this angle and use a straight wing without making a wing that goes up a little??
Built one, it flew so well. Thx
Any tips for the build? Thanks!
@@Syphronix Not really. The PDF and the video pretty much cover everything. I am new to RC BTW.
👏👏👏👏
👍👍👍
Kendin, i have a problem with the transmitter and receiver from your 8ch 2400 meter range. More then 1 servo's react on throttle or yaw. Do you know what i'm doing wrong? Kind regards. Henk Ketelaars (The Netherlands)
How stable is the rudder after a period of use? Any way to strengthen it?
sir can you write delta wing code or next project for delta wing everythink is done last think is mixxing allgreat i love your work sir keep going
Hi, watching the video, about 10 seconds in you start making wing reinforcers to ensure the correct airfoil. Both are made from 5mm foamboard I believe, one is two layers thick, the other four. Is the width of these reinforcers critical? , if so what should they be please? They are obviously 540mm long for each wing half. Good work.
Sorry I forgot to add it. I updated the detail page. Thanks.
www.rcpano.net/2023/04/19/how-to-make-amazing-stable-rc-trainer-airplane-with-handmade-rc-long-flight-time/
@@Kendin-Yap can't open the link, can you give the width?
@@zhaozhao6148 Lenght: 73 cm (28.74 inc)
Wing span: 109 cm (42.91 inc)
Flight weight: About 675 gr
Center of gravity: 4.9-5.5cm from the front of the wing
Required control system: Min. 4 channels, 4 micro servos
Suitable battery: 11.1V 2200Mah (Max 2700maH)
Suitable motor: 2212 Brushless Motor (980-1400KV)
Suitable propeller: 2 Blade 9×6 (9060)
Flight Time: Approximately 30 minutes for an average gas level of 38%
Wing area: 1976 cm2
Vbar: 0.46
Please please please build a supercub with Alison's using foam whose wing is about 80cm long
I need to build one your vedios are perfect
Thanks to your video, I'm planning to build one. But I have a question. Why do you have to tilt the motor a little bit when you're building it?
www.balsaworkbench.com/?page_id=2714
@@Kendin-Yap Oh thank you very much sir
I am a beginner in fixed wing airplanes and now I will be making my first airplane. Do I have to use Gyro so I can fly and how do I use it? Can you explain in a good way ❤️
Üstat elinize emeginize sağlıkl. Bir tane de pusher model yapmayı düşünür müsünüz. Pusher modeller de trainer icin uygun mudur ?
Eski videolarımda pusher model var. Trainer için çok ideal değil. Burundan çekişli modeller daha stabildir.
Question please if I have a motor 1400with esc30 With battery 2200 I have a plane with a long wingspan 84cm With a bird's length of 70cm And wing width 22cm. Can the plane fly well and is it similar to the plane in this video?
Tu es forte mon Garçon
❤
Nice project... I will try to build one. Just to clarify if the info at 12:15 related to CG is correct??? that might be ~49-55mm (4.9-5.5cm) instead of 4.9-5.5mm ???
Yes, sorry there was a typo. But there is correct data in the technical information below the video and on the detail page on my website. CG: 4.9-5.5cm (49 - 55mm)
@@Kendin-Yap Thanks and please keep going. You have great projects there 😁
@@Kendin-Yap I looked for this information. Thx, nice project. I will try make it. Greetings
may i get for this program arduino nano with lora?
How long does it take to build one like this.
Bu uçağın arkadan motorlu olanı nasıl yapılabilir çok şeyin değişmesi falan gerekiyor mu? Arkadan motorlu buna benzer uçak yaparsanız çok güzel olur.
I can't find the insulation foam sheets anywhere. could you send me a link, maybe for a product on amazon that would work
*****If I may add - - there doesn't seem to be anywhere that has in stock the basic 3, 5 and 7mm card stock that you specify. It's either out of stock or such a high price that it's unaffordable. Do you have any further suggestions for outlets that have specifcally what is needed and if you could explain what a "panel" is of the card stock - it's dimensions please? Seems everything else is available where you noted - which I am thankful for!
For Kraft Foamboard and insulation foam, it makes sense to search local dealers in your country of residence. Since it is a large-volume product, it is expensive to procure it from international vendors by cargo.
Kraft foamboard; It is a foam material whose outer surfaces are covered with kraft paper. Plate dimensions: 50x70cm. Or it could be larger. It is a light material.
Insulation foam, on the other hand, is a fully condensed foam material. Plate dimensions are larger than foamboard.
Insulation foam is usually sold in construction-building materials markets.
Foamboard is sold in shops that sell architectural models or hobby-stationery.
@@Kendin-Yap Thank you very much! I appreciate the response. 🙂
if i want to use this controller for drones do i need to change code or something else?
Can I use 2204 2300KV brushless motor with 15A ESC? For a slow flying?
You can use it. But high kv (high rpm) is not ideal for slow flying.
Hocam motor seçimini nasıl yapılır ? Birde RC uçak nasıl uçar mantığını anlattığınız bir video atarsanız yani bende kendime özgü RC uçak yapmak istiyorum o yüzden.
Uçuş mantığını anlattığı video var kanalda.
uçağın yapımını bitirdik hocam yapısal ve elektroniksel olarak sorunsuz duruyor haftasonu test uçuşunu gerçekleştireceğiz. sadece şöyle bir durum söz konusu, uçak taksi esnasında bazenleri ağırlığı uca verip pervane üstüne düşme durumu oluyor bu da fazla bir sorun teşkil etmiyor. videonuz için teşekkürler
What dimension have those 4 strip foam? That is 5mm foam?! Thanks
Strip for battery 25 or 38mm, Strip tape for hinge 25mm, Foamboard 5mm, insulation foam 3mm and 6mm
Perfect ..bro, what size of the brushless motor sir..👍
2212
hocam artık daha büyük modeller bekliyoruz
Elinize sağlık, iki sorum olacaktı. 1-) kanatları deprondan değil de fotobloktan yapsak herhangi bir sorun oluşturur mu?
2-) Bende 1800 mah pil ve 1000kv 1045 pervane mevcut. Muhtemelen pilden dolayı daha hafif olacaktır ve motor-pervane kaldırma gücü de sizin kullandığınız motor-pervaneye göre yaklaşık 100 gram daha fazla kaldırma üretiyor. Datasheete göre. Yani bu kaldırma-ağırlık dengesi sorun yaratır mı? Uçağa fazla mı gelir yoksa çok etkilemez mi
Evet kanatlar da fotobloktan yapılır. Ama fotoblok biraz daha ağırdır. Uçuş süresini bir miktar etkileyebilir. 100gr itme kuvveti farkı önemli bir sorun yaratmaz. 10 inc pervane uzun olduğu için yere sürtebilir. İniş takımlarını bir miktar yükseltmek gerekebilir.
Elinize sağlık, sizin gibi kanalların youtube da olması çok güzel. Acaba bu uçak 10 mm lik xps köpük ile yapılabilir mi çünkü 5 mm lik fotoblok bulmak zor
10mm biraz kalın ama gövde genişliğini ona göre uyarlarsanız olabilir tabi ki
Usta Gemi gibi bir RC araç gelirmi büyük
Keşke tanışma veya konuşma fırsatım olsa sizle🥺
Can I use a whole piece of foam board measuring 100 cm without having to cut it in half and weld it?
Where do you get all the specs for all the little pieces on the inside?
Luar biasa sekali kerja anda👍
Hocam selamlar , bu uçakta elimdeki 3s 3300 mah pili kullanabilirmiyim ağır gelirse , uçakta ne gibi değişiklik ile bu pili kullanabilirim. Malum lipo pil bulmak baya sıkıntı.
Bu uçak için 2700 üstü ağır olacaktır. 3300 ile de uçabilir ama kararlı uçuşu azalacaktır. İniş mesafesi uzayacaktır. Ağırlık nedeniyle motor daha yüksek devirlerde çalışacağından uçuş süresi artmayacaktır. Ama denenebilir.
@@Kendin-Yap Anladim hocam teşekkürler ederim
I cannot find the insulation foam board. What else can I use? Can I just use regular foam board?
hocam bende su 27 ucaginizi yapmaya calismistim ama bir kac metre sonra yere cakildi ama yinede benim icin iyi bi deneyimdi bide f35 yada b2 siprint bomba ucagi yapimi yaparmisiniz acaba
abi depronu nereden bulabiliriz. 10 lu adet satılıyor ve 2 bin tl yalıtım malzemesi olarak . Çok pahalı . Buna alternetif ne kullanabiliriz köpüğe çok benziyor ama ucuz alternetifi var mıdır? eline sağlık
Depron bir yalıtım köpüğüdür. Depron olması şart değil farklı marka yalıtım köpüklerini kullanabilirsiniz. Bi ara Koçtaş'ta tek tek satılıyordu markasını hatırlayamadım ama... çok daha uygun fiyatlıydı.
Depronu nerden temin ettiniz acaba onun linkini de paylaşabilir misiniz?
Sir, I do not understand what is the measurement of the place where you placed the long, light-thick wooden pieces, and I also do not understand what is the size of the piece to install the wing before installing it in the first place, when I placed an airfoil and the airfoil stopped and I glued them together.
Can I use a fan? 8*6 With this model in Motor1400
Merhabalar hocam neden batarya kapasitesine max 2700 mah dediniz?
Kapasite arttıkça pilin ağırlığı da artar. Belli bir ağırlıktan sonra model kararlı uçuş özelliğin kaybetmeye başlar. Bu yüzden bir sınır olmalı. Her model uçak için aerodinamik yapısına ve boyutlarına göre bir ağırlık sınırı vardır.
It seems that my hobby has already accomplished.but I have a problem how to charge the battery?
Hope to give me reply soon.❤️
โฟมทีใช้ทำเครื่องบินหาผซื้อได้ทีไหน ในช้อปปีมีไหม ชื่อเรียกว่าอะไร
If you use a 1000kv He must use a large fan. Does this mean that the fan will hit the ground? How can I avoid that?
8x6 propeller can be used for 1000KV motor. It's not the ideal propeller, but it works. For 9x6 or 10x4.5 propeller the fuselage needs to be upgraded. In this case, larger diameter wheels can be used. Or the landing gear should be raised.
hocam kanat kesiti kısmında kanadın alt kısmı ve üst kısmıyla olan yükseklik farkı bir kanadımda 1.7cm civarında diğerinde 2cm oldu.bu ciddi bir sorun oluştururmu çok ufak bir fark var yani gözükürde
Uçmasına engel değil ama iki kanat arasında kaldırma kuvveti farkı oluşacaktır. Kalın olan daha fazla kaldırma kuvveti oluşturacağı için diğer tarafa yatma eğilimi oluşacak. Ters yönde aileron ile dengelenebilir. İdeal olan bire bir aynı olmasıdır.
Hello, is it possible to create a fixed, straight wing without a slight rise in the wing upwards, and what are the reasons for doing so?
Wing angle is necessary for stable flight. If there is no angle, the control will be aggressive. The angled wing structure is important, especially for those who are not very experienced.
@@Kendin-Yap I will use a long spiral piece to connect two separate wings, but the question is: How will I build the wing elevation angle when I have two wings connected by a long spiral piece? What are the alternatives to using such an angle that gives stable flight? For your information, I am a beginner in flying, but there is a friend of mine who made a plane with two separate wings and connected them with a spiral piece, but I did not. Use this angle and use a straight wing without making a wing that goes up a little??
how do i know if i made the wing right?
Öncelikle elinize sağlık tüm videolarınızı izledim ilgi ile takip ediyorum kendimde benzer bir uçak yapmaya çalışıyorum fakat arduino ile pc üzerinden kontrol edebileceğim bir model yapmaya çalışıyorum el becerim ve elektronik bilgim biraz kısıtlı bu tarz bir çalışmanız var mı yada bu tarz bir video düşünür müsünüz ?
Teşekkürler. PC ile kontrol konusunda bir tecrübem yok maalesef.
Hocam bu fotobloku nereden bulabiliriz hiç bir yerde yok sizin kullandığınız veya farklı tipleri varsa link atarsanız sevinirim
Bir süredir kolay bulunmuyor. Ben eskiden aldıklarımı kullanıyorum. Ama internette aşağıdaki linkte satıldığını gördüm.
www.hakikatkirtasiye.com/urun/fotoblok-straforlu-maket-kartonu-kraft-5mm-50x70cm-5li-paket
Hocam kanat gövde oranlarını neye göre belirliyorsunuz. Bunun için bir program var mı