Arduino 10 Channels Wireless Transmitter Receiver | nrf24l01+| DIY 🔥
Vložit
- čas přidán 6. 07. 2024
- In this video we are going to make 10 Channel NRF Transmitter Receiver using Arduino.
No soldering👌
We will use nrf24l01+ modules to transmit and receive data.
we have total 10 channels using joysticks, push buttons and potentiometers.
We will control servo motors and led's at receiver end.
This can be used to control RC Planes, drones, cars etc.
I have explained in details each step along with code and diagram for transmitter and receiver.
👉 Please subscribe: czcams.com/users/hashinclude...
👉 Components - Transmitter:
✅ Arduino Nano amzn.to/4cquOTP
✅ nrf24l01+ transreceiver amzn.to/3fyb8VN
✅ nrf adpater amzn.to/3fyb8VN
✅ Analog Joystick amzn.to/4eAxQ98
✅ Potentiometers
✅ Push buttons amzn.to/3VQCHfk
✅ 7-12 V DC Battery (in our case lipo 2s battery) amzn.to/4cxwz0Q
✅ Breadboard amzn.to/3sXgZqC
✅ Double sided tape amzn.to/3KSJdfa
✅ Jumper wires amzn.to/3heE3Pa
👉 Components - Receiver:
✅ Arduino Nano amzn.to/4cquOTP
✅ nrf24l01+ transreceiver amzn.to/3fyb8VN
✅ nrf adpater amzn.to/3fyb8VN
✅ Servo motor amzn.to/3zl7MPc
✅ leds amzn.to/3VRfiu1
✅ 220 ohm resisters amzn.to/3VRfiu1
✅ UBEC/Buck converter to step down voltage to 5 v amzn.to/3xB5gUv
✅ 7-12 V DC Battery (in our case lipo 3s battery) amzn.to/4ewRm6G
✅ Breadboard amzn.to/3sXgZqC
✅ Jumper wires amzn.to/3heE3Pa
👉 Shorts Channel :
/ ujwalnandanwar
👉 Codes and diagrams:
github.com/un0038998/10_Chann...
👉 Elevating Car
• Elevating WiFi Car usi...
👉 Camera Car
• Surveillance Car using...
👉 Wi-Fi Car
• Smartphone controlled ...
👉 Hand Gesture controlled car
• Hand Gesture Controlle...
👉 Bluetooth car
• How to make Bluetooth ...
👉 Obstacle avoiding car
• Arduino Obstacle Avoid...
👉 Arduino RC car using nrf24l01+ module
• Arduino RC car using N...
👉 Obstacle avoiding car
• Arduino Obstacle Avoid...
👉 Arduino RC car using nrf24l01+ module
• Arduino RC car using N...
👉 Watch more videos:
/ hashincludeelectronics
👉 Follow us on Instagram:
/ hashincludeelectronics
⏱Chapters
00:00 Intro
00:45 Transmitter Components
01:27 Transmitter Connections
05:08 Transmitter Code Explanation
06:39 Receiver Components
07:10 Receiver Connections - Part1
08:08 Receiver Code - Print values on Serial Monitor
11:00 Receiver Connections - Part2 with Servos/LED
12:23 Receiver Code - with servos/LEDs
12:59 Demo
14:40 Important Points
#10channeltransmitterreceiver #arduino #hashincludeelectronics - Věda a technologie
I made this it is not a fake video it is work well really. it is working I expected. I was very happy😁😁
Thank you very much for your comments :) I am glad that this project helped you .
Your transmitter and receiver work properly till now?
First of all I would like to say a very well done tutorial. The code explanation part seemed a bit rushed. But I think by pausing often the parts can be understood. And I understand why that portion was fast. The video would be much too long if you didn't. Besides, anyone who is going to be adapting your code to their project should be able to figure it out.
I have been experimenting with both Arduino and ESP32 to control a 6-servo robotic arm. With the Arduino I've used an HC-12 module. I've been hesitant to switch to an NRF module because of the problems I've heard about them and needing so many Arduino pins for communication. Your tutorial is making me rethink using the NRF module. I'm very impressed by the responsiveness of your controls. And you dealt with the parsing on the receiving code nicely. You definitely earned my subscription. Thank you for sharing.
Thank you very much for checking out the video and nice comment 👍I am glad that you found this video helpful. Yeah I kept code explanation short so that video does not become longer. Code is really straight forward and as you mentioned it can be customized as per project need. Thanks for subscription too 👍
@@hashincludeelectronics so nice ...
Awesome one , its very useful to me, all the best for your upcoming video...💜💜💜🥳🥳🥳🥳😇🔥🔥🔥🔥🔥🔥🔥🔥
Thank you very much 👌🏻👍🏻
Thank you for uploading an amazing video!!!!!! 😍
Happy to help 👍🏻👏🏻
Its a perfect 100% pure tutorial its called tutorial exately thanka a lot for this stuff
Thank you very much for checking out the video 👍🏻👏🏻
Best tutorial ever❤
Thank you very much 👏🏻👍🏻
Excellent sir ☺️
Thank you 👍🏻👏🏻
Question: can I put a 10uf capacitor & adapter at the same time on the NRF24L01?
Thanks bro it's fantastic
Awesome 👍🏻👏🏻
Hello! Very clear and great video. What needs to be changed in your code so that when you press one of the buttons, the LED lights up and goes out when you press it again. And what needs to be changed so that when you press one of the buttons, the LED blinks like a turn signal. I would like to apply your control in the model of the car where there is a headlight and turn signal control.
Thanks for checking out the video. You can do that at receiver end. At receiver end you need to set the LED status (Use some variable). So when the LED status variable changes from LOW - > HIGH that is ( 0 -> 1) , then you consider toggling the LED. same you can use of blinks.
Very helpful video. Good job!
Welcome 👍🏻
@@hashincludeelectronics please create a videos:- how to connect a motor driver (to connect 775 12v dc motor) to this receiver ?
@@newthinkofficial You can check my video on nrf24l01 rc car which uses L298N motor driver to control DC motor . You can use this receiver in the same way. Give it a try .
@@hashincludeelectronics okay... Thank you..!
Thank you for this type of video
You are welcome 🙏
@@hashincludeelectronics please make a video for how to reset factory a nodemcu 🙏
@@hashincludeelectronics please make it
Perfect
Thank you very much 👍🏻👏🏻
good job!!!
Thank you very much 👍🏻
This is a really good video. I have been building a custom radio for my model tugboat following a different video, with no audio. This video filled in some gaps for me. I’m soldering my project PCB boards. Thank you for posting.!
Thank you very much for checking out the video and nice comment . I am glad that this video helped you 👍🏻👏🏻
I have building a remote controlled ship about 10 feet long
Excelente video te felicito mi amigo. Eres el mejor, todo muy bien explicado y ordenado. Este si es un tutorial de verdad y no falso como en muchos otroa videos. Like y suscripción saludos
Muchas Gracias 🙂👍🏻
@@hashincludeelectronics estoy haciendo un camion con su remolque a control remoto. Me sirvió mucho tu video saludos
hola, no estas batallando con los modulos nrf? los mios no se comunican:c
@@valquiriavalor7082 hola si batallé porque habia visto otros tutoriales y crei que los pines los conectaban siempre igual y en este tutorial en lugar del el pin 10 era el 11 (el miso). Pero fue error mio por no verificar bien la conexión. Checa eso y ojala se te solucione saludos
@@jeremias5737 muchas gracias por responder, hiciste algo extra para disminuir el ruido o solo seguiste tal cual el video?
💯💯
👍
I have the version with the Power Amp and external antenna. Had to modify the code to set the power level to avoid saturating the receiver during testing. Otherwise this project worked great.
Thank you very much for checking out the video and nice comment 👍🏻👏🏻
Nice, im gonna use a arduino uno for the controller and a arduino mega for the car
Nice . Yeah it should work as long as you make proper connections as per Arduino board . Make sure you use rechargeable battery only 👍🏻good luck and also share the experience later .
Can i use this roborace comp
Will this control the pwm and brake or i have to buy a heavy motor driver like smartelex ?
⭐⭐⭐⭐⭐ it works well 👍
Nice 👍🏻👏🏻👌🏻
Thank god its working smoothervthan me
Awesome 👏🏻
@@hashincludeelectronics hi bro ive made this but its rx is not working properly
@@rccreators7758 i also face the same problem
Good day,
@hash include electronics. Thank you for uploading an amazing video. I am presently going through the connections and I was able to read the values from receiver code - print values on the Serial monitor (Chapter 8:08). I am presently stuck on trying to add the LEDs and Servos. I tried connecting just the 4 LEDs without a battery (just the USB cable to the computer), to the receiver connection and ran the appropriate sketch, to no avail as the push buttons were not able to turn them on, from the transmitter side. I must admit I made some adjustments to your given circuit. I used 2 pieces of NRF24L01 RF Transceiver instead of 2 pieces of Nrf24l01 1.1km Wireless module because my Nrf24l01 1.1km Wireless module did not seem to work.
Thanks for checking out video 👍🏻 if you are able to receive the values then it should work for LEDs as well . Hope you have using nrf adapter as well . Try using battery supply . Don’t worry it will work .
@@hashincludeelectronics Thank you so much for your help, it has finally worked, I only needed to solder a 10uF 25V capacitor to my nRF24L01 module even with the wireless adaptor in use. I am very very grateful. Thank you once again.
@@chidinmaogbazi5687 awesome work 👍🏻
Thanks bhaaiii
You are welcome 🙏
I've come across a little issue , the serial monitor shows that it recieves data but when upload the reciever code to the arduino to use the servos won't move. Any idea why such a thing could happen ?
Edit : I didn't edit anything on the code , did I miss something that was supposed to be selected ? Like a line that was unselected but I have to select. Oh and I used 3pin toggle switches for the switches , non of them work on the serial monitor along with one potentiometer.
Edit : so I did manage to make everything work and even added 2 more led channels , but still I can't seem to get the two potentiometers to work. For some reason when I move the rigjt joystick y axis, the two potentiometer channels move too. Worst part is I don't see any short circuit anywhere. ( was tested with the pots removed) . When I attach both pots , one of them work but still it's possible to move that axis with the joystick right y axis
Try connecting just one servo and one potentiometer first . And then go on increasing .
@hashincludeelectronics for using esc for a bldc motor,in the place of servo motor shall we need to change any in code?
You will have to make changes in receiver code . The value written to servo motor is 0-180 and 90 is center position when joystick is at center . For BLDC you will have to make center position value as 0 when joystick is at center . 👍🏻👏🏻you can check my BLDC motor video for the reference and see how we can change the code accordingly . 👍🏻👏🏻
@hash include electronic very nice video. Bro i have a question can we use dc gear motor instead of servo motor. Or we have to do something pls reply
Yes you can use dc motor. Please check my videos rc car using nrf trans receiver module for reference 👍🏻👏🏻
I have one more question ; can this be done with 2X Arduino pro mini MK 3.3V or 5V, or a combination with Arduino NANO
and Arduino Pro mini (SparkFun) and do these codes of yours match?
Zlatko Turčić (Croatia)
If all pins are available then I believe the code should work . I did not try Arduino pro mini but you can give it a shot .
Great. Can I use push on or push off buttons instead of normal push buttons?
And how to use rocker switches, 3 position toggle switches in this project?
Yes you can those buttons 👍🏻👏🏻
@@hashincludeelectronics Then there is no need to make some changes in the code?
@@hashincludeelectronics please reply ..🙏
Hello how is possible to connect wirelessly the pins of MAX7219 (CLK, CS, DIN) to Arduino pins? So that there's no more physical wires that connects between MAX7219 and Arduino. Thank you.
Unfortunately I am not sure about this module 👍🏻
Make a full detailed video on programming please in hindi
i have a question,I can do this project with the ARM STM32 DEVELOPMENT BOARD
Thank you for checking out the video 👍🏻👏🏻. I have not tried that module . I would suggest to use the same modules which I used in project to avoid issues 👏🏻👍🏻
How to connect multiple transmitter to one receiver to light up led and trigger relay on the receiver side?
You can use same pipe address in all transmitters 👍🏻👏🏻
Which arduino nano module should I buy, I mean there are many nano boards with different sram, cpu flash memory
You can buy any Arduino nano board 👍🏻
is it possible to do with two DC motor l298n driver in addition?
Yes you can do that . Check my videos on rc car using nrf module for reference
Hello,
Thanks for uploading such a good video but I want to ask that if, I want to replace the joystick with any other components like toggle switch or any normal button , so it will work or not. I know that you already add some buttons but I am asking just for information, i want to make this transmitter. Thank you
I hope you will reply
Yes you can add that . However you will have to read the button state as digital read same as other buttons.
Hi nice video , I'm kinda curious why did you used a nrf24l01+ PLA + LNA module for the reciever instead of just a base module nrf24l01, does it have to do anything with more precise control and noise reduction ? I'm curious about it cuz you usually use that module if you want to transmit information back to the transmitter.
This module has better range with antenna . So I used it . It will be very useful while making drone or plane projects.
@@hashincludeelectronics oh that makes sense , plus I believe the antenna would be better off at picking signals compared to the pcb antenna on the module I used.
@@orange_tweleve exactly 👍🏻
Thanks for your video, how is it possible to send data from 3pins of 74HC165 (Load input pin#1, Clock pin#2 and Output pin#9) to multiple arduino boards? Thank you
Unfortunately I don’t have idea about this module you said .
Thank you, it's a Shift register that I used to expand inputs of arduino to have more push buttons. I thought instead of connecting the 3pins of Shift register using wires to arduino pins, would be great if it is done wireless with NRF24L01 module.
The power to reciver arduino should be given to 5v pin or VIN pin?
Vin pin
Is there is a different if I chose the nrf module vs nrf +antenna
I mean the code is the same or change
Yup it’s same . No change in code 👍🏻
Can anyone share the link to buy this potentiometer?
If i want to use 12v brushed motor in place of servo and led
You can use that . However you will have to motor driver module to run that 12 v dc motor . You can check my video on L298N motor driver for that . Also check my car related videos using nrf24l01 module 👍🏻👏🏻
Hope that your code work if we try it!
Yes it will . All the best 👍🏻
Hello brother.. it is possible to install a screen on this control so that the related settings can be made. Same as the Fly Sky control panel
Yes you can connect 16*2 LCD display to it 👍🏻👏🏻
@@hashincludeelectronics Can you teach me how to do this?
I have Arduino uno and nano
so controller gets 7.4v? does it burn?
also what is the max amps it can support?
Great vídeo 😊
Yes we can provide 7-12 V to Arduino . It does not burn.
@@hashincludeelectronics Nice! thanks im buying the components to make my own
I want make a project which is wireless home appliances on ,off & and also show ampere & volt in remote display
You can check my video on home automation for reference 👍🏻👏🏻
Hello bro I don’t want the push switch insted of this i add more
2 X potentiometer &
2 X toggle switch
What is want to do for this ?
You can only connect potentiometers to Arduino analog pins . Regarding toggle switch you can use it instead of push button 👍🏻👏🏻
Hi , I have used Uno as transmitter and nano as receiver. But nothing shows up on the serial monitor even though im using rechargeable batteries. Please help as the serial monitor remains blank
Are you using NRF adapter ?
Instead of servo can we use a bldc motor
Yes you can 👍🏻👏🏻
Sir plz make transmitter and receiver for drone
That will be a new project 👍🏻👏🏻
Its like we need to connect differently than universal receivers can u do with 3 pin
Sorry but I did not understand your question
@@hashincludeelectronics i mean theres is light use in other channels can u do other functions rather than led
Good video. Question: Can it all be connected without an nrf adapter? !
Thanks for checking out the video . 👍🏻👏🏻. We can make this without nrf adapter but I would not recommend it . Nrf adapter solves many power related issues in this project . So please use it . It’s cheap as well .
@@hashincludeelectronics Did you mean that because of a possible voltage drop? I would try to solder the capacitor (25V 100 µF), if that is a possible problem, since I don't currently have an nRF adapter.
@@zlatkoturcic3041 yes you can try that . But how you are going to power nrf module ? Using 3.3 v from Arduino nano ? Don’t think that pin can provide enough current . You can give it a try . However if you face issues then please buy those nrf adapter .
vaiya, receiver er 2 pas theke 2ta pic diba, (servo motor gular wire guja j connet hoice oi jwgata clear na)
Can i add a bldc motor in the receiver part
Yes you can . You should use any of the servo channel for BLDC motor 👏🏻👍🏻
Please add burshless motor with it on a another video please 🙏🙏🙏
How to control motor forward and backward does the code changes or can we connect motor in place of one servo
Please tell bro
Or we should use brushed esc or brushless esc
Please reply bro
You can check my video on Arduino nrf24l01 car for reference👍🏻👏🏻
can you add dc motor , motor control with a joystick (robotic car )
You can easily add it . Check my other video on rc car using nrf24l01+ module for reference
Can use push Botten insted of joystick?
Yes you can use . However we are already using push buttons in this project . Joysticks are used for different purpose that it to add some analog control .
Hello, I am having trouble with this, I am using an arduino nano and uno, and using the exact same modules and have confirmed multiple times connections are correct. I am using the correct powersource for the transmitter, but am still getting the "no signal" error from the receiver. Please help, I have tried multiple things, not working
I got the code to work, but Now I am having the problem that as soon as I plug something in, the connection no longer works
Are you using rechargeable battery for receiver ? If not then please use it . Also make sure you are using nrf adapter as shown in video 👍🏻👏🏻
I have to connect two L298N motor drivers. So what will be the connections ( circuit diagram) and code for the receiver.?
I need this connection on one potentiometer and one analogue joystick.
Transmitter will be same....
Please check my video on how to use L298N driver . Also check rc car using nrf where I have used L298N driver with nrf transmitter. Those videos will give you idea for your project . Good luck 👍🏻
@@hashincludeelectronics but how can I combine those codes?
And what will be the circuit diagram?
Please help
@@newthinkofficial you need to check the videos slowly and carefully . Give it a try . Go step by step . Add one driver first and one motor.
@@hashincludeelectronics please provide me code and circuit diagram.
Please!🙏
@@newthinkofficial unfortunately I can not help with full code and diagram for your customised project. Please note that it needs full connections , testing etc . So you need to check videos and use it in your project . 👍🏻
is it ok if the transmitter port available is com9 only? while the receiver port is com8?
Yes that’s fine . 👍🏻🙏
@@hashincludeelectronics hello, follow up question, is it ok to use variable regulated ps instead of using buck converter?
@@rogelkimuelr.4473 yes you can . However make sure it provides 5v output at receiver . 👍🏻👏🏻
Can I replace lights with DC motors with same wiring diagram , please fast answer
You can not directly connect DC motors to microcontroller . You will have to use motor driver module to run DC motors 👍🏻👏🏻
Sir, have you made it for 2 way communication?
It’s one way communication 👍🏻👏🏻
Can i use ESP8266 NODEMCU without using arduino nano?Please reply bro this the last part where im gonna build it
Unfortunately not in this project . This project needs Arduino board either Nano or Uno.
@@hashincludeelectronics Oh okay thank bro
Bro i have one nano only iam use nodemcu instead of another nano pls reply quick i have exibition
i dont think that works.. but try it... if you have 2 nodemcu , then check other videos in YT
Greetings!
I connected everything like you, downloaded the codes from Git hub, the transmitter is Arduino "NANO" and the receiver Arduino "mini". The serial monitor keeps showing "No Signal". What could be the problem?
Nice greeting!
Please make sure you use rechargeable battery . Also make sure you use nrf adapter . Check for any loose connection. Don’t worry it will work .
@@hashincludeelectronics i have the same problem but with an arduino uno and an arduino mega. (I’m using a rechargeable battery and nfr adapter). What could be the problem??
Can you make different channels outputs for rc plane
You can use the same setup for RC planes . It’s like you have to use servos and bldc motor . 👍🏻👏🏻
@@hashincludeelectronics no I meant that can you show how to make different channel output as in other commercial recievers.
i have a question, how much meters this transmitter and receiver can stay conected?
Thanks for checking out the video 👏🏻👍🏻. It is said that it can go upto 1km. Give it a try 👍🏻
How to make a brushless motor go front and back pls reply
It’s not possible to reverse the direction of BLdC motor programmatically . It’s has to be done by interchanging any 2 wires physically. There is another hack way to do it programmatically using 2 relays but it’s not recommended.
Can u pls contact me how to do that because i am a beginner and i want to know how pls
Question: Why don't you use the switch in the joystick?
You can use that switch as well if needed. However I used additional switches .
It's kinda annoying to use that switch cuz there's a high chance to move the joystick axes while pressing down on it.
Can i control brushless motors from this transmiter and receiver
Yes you can . You can use any of these servo channels . 👏🏻👍🏻
Can I use on/off switches at the place of push buttons?
Yes you can
@@hashincludeelectronicshow much ( k potentiometer) you have used in this video?
@@newthinkofficial it’s 10k
Transmiter and receiver ki jagah par Lora 3:34 module transmitter and receiver Ka use kar Ke ak video banao bade bhaiya
Sure will try 👍🏻👏🏻
How can i control l298n motar driver instead of servo can you please help me I tried making change in code but not working please reply
Yea you can . Please check my other videos on car using nrf transmitter receiver . That video will give you idea 👍🏻👏🏻
bro i tried but i didnot get any pwm digits on serial monitor ( i have checked the circuit )
Please check the video slowly and carefully for any missing step 👍🏻👏🏻
Is there any chance or way of extending the range of the transmitter and receiver?
It is said that the range can go upto 1km . If you need additional range then please check for other module which can provide that much range . How much range do you need ? And for what purpose ?
@@hashincludeelectronics I need at least 5km range for my project purpose.
@@surajkanojiya5943 Most people say that antennas like clover leaf and Yagi can provide these range. However, you need to make it yourself (I mean test it yourself) and sometimes, it will have power issues or any other things.... But try it.....
Sir you have made very usefull and best video ever but sir i have been having a problem that i had aploded the the code correctly but it is not working i have checked the connection properly when i connect reciver to computer and opened serial monitor it is not showing any values please give me a solution sir
Thank you for checking out the video 👍🏻👏🏻. Please make sure you use nrf adapter as I used . Also double check for any loose connections
Yes sir i am using nrf adapter aswell and i check the loose connections also but it is not working sir can i message you personally because i have to submit this project in school sir please
Can i use only servo or motor without using led
You can use but you need to make changes in code where we used LEDs and push buttons . We are already using servo motors though 👍🏻👏🏻
Can we make 14 channels in aurdino nano
Yes we can . You can use analog pins as additional pins 👏🏻👍🏻
I am getting no signal again and again, I have wired it correctly too. I am also using the same library version as you.
Please Help!
Please makes sure there is no loose connection . Also make sure you are using nrf adapter as shown in video . Check for power supply 👏🏻👍🏻
hlo bro brushed motor ko control kar sakta hai for rc tank
Yes you can . Please check my videos on cars 👍🏻👏🏻
all car video are related with esp32 module
@@ankushdhiman0111 there is video using nrf module and Arduino . Please check that 👍🏻👏🏻
Please edit the code for bldc and share with me please 🙏🙏🙏
Hey. Im a beginner at arduino and coding, but gon a test this.
Can the 10ch be increased to more channels?
I want minimum 10ch for my 3d printed excavator.
Yes it can be expanded to more than 10 channel . Just use the available input pins and code it. You can copy paste the required code for increased channel .
Can i add trogle switch in this
Yes you can add 👍🏻
@@hashincludeelectronics thanks.. sir
How many channel transmitter can be built using arduino nano?
You can use all the IO pins of Arduino board to set your channels . I have used almost all the pins . 👍🏻 please check if any pin is left and you can use that for new channel .
hi your video is very helpful for me but i am having problem : if(radio.isChipconected()&& radio.available()) . Can you help me? 11:09
Thanks for checking out the video 👍🏻. What problem are you facing ?
@@hashincludeelectronics I cannot connect between tx and rx. tx light is on but rx is not
@@phamlong1180 if you're getting of a error on this line of code , remove the "radio.isChipconnectedd()&&" and then try again to upload...
Great vidio
I try upload your code but it can conect,in serial monitor is no signal..
Maybe u have solution ?
Use rechargeable battery only . Also make sure you are using nrf adapter .
I've been struggling for 2 weeks, replaced the boards and Ard..UNO, PRO-MINI, NANO - new Nrf24...with and without antenna, but I can't manage to connect the transmitter and receiver, on the serial monitor it keeps saying "No Signal" and the ice the bulbs do not receive a signal. I mean give up trying.😭😠
@@hashincludeelectronics Hello, I use an NRF adapter and a rechargeable battery (2x18650=7.4V) via a step-down DC/DC to 5V. For the transmitter, the same 2x3.7V=7.4V, but it doesn't work. Is it possible that the power supply of the receiver goes through the reducing voltage?!
सर,
क्या एक लॉरा मोडूल रिसिव्हर और ट्रान्समीटर दोनो काम एकसाथ कर सक्ता हैं ?
Yes it can do . This module can act as transmitter and receiver . But it can receive or transmit data at a time
Can i use this with arduino uno instead of nano
Yes you can 👍🏻👏🏻
@@hashincludeelectronics hii bro
Why are you not doing any projects it's been one year you posted videos
@@shadowfighter7085 I will be back with videos soon . Currently occupied with some other stuff . But stay tuned 👍🏻👏🏻
WHAT HAPPENS WE SEND TWO SIGNALS AT A SAME TIME THROUGH nrf24l01 ?????????
Not sure if we can send 2 signals at the same time from same transmitter . Please check nrf24l01 sheet 👍🏻👏🏻
Please tell the potentiometer reading.
You can use 10k 👍🏻👏🏻
for circuit design, what software is best ? free
I use fritzing 👍🏻👏🏻
@@hashincludeelectronics but how can i add nrf24L01 adapter module ?
I got the code to work, but Now I am having the problem that as soon as I plug the servo in, the connection no longer works
Which power source are you using at receiver ?
@@hashincludeelectronics I am using a wall outlet that supplies steady 5volts through USB port. It is not a adapter, it is a directly installed USB port
Can I make it with Arduino pro mini?
Unfortunately I have not used Arduino mini . If all required pins are available then give it a try . Else use Arduino nano or Uno .
Hello! Can you help me? I have an error 'class RF24' has no member named 'isChipConnected'
Uninstall any previously installed rf24 library . And install new one suggested in video
@@hashincludeelectronics
Works, thanks)
@@user-im7cz6nv2i glad that it worked 👍🏻 good job
I have nrf module without the antenna will it work ?
Yes it will 👍🏻👏🏻
@@hashincludeelectronics also I m thinking of making rc boat using this , and the module will be really deep in boat , will the receiver get signal from it ?
@@hashincludeelectronics also is giving the power thing for module important?
How to bind transmitter and receiver
Please check the video for the information you need 👍🏻👏🏻
I did everything the exact same and it keep showing me no signal in serial monitor 😢 please answer me 😢
Please use rechargeable battery . Also make sure there are no loose connections . Also use nrf adapter only . Check video for any missing step again . 👏🏻👍🏻
How can we use brushlese motor in this project?
Please check my video ok BLDC motor for reference 👍🏻👏🏻
@@hashincludeelectronics it is very difficult for me to change the code for using bldc
Please edit the code for bldc and share with me
@@hashincludeelectronicsplease modify the code for for bldc and share with me please 🙏🙏🙏