Stunning Root Ball Turning Transformation
Vložit
- čas přidán 3. 04. 2024
- I was given this Almond tree root ball from a member of my local woodturning club. This is my first attempt at turning a root ball. I was definitely a little nervous about this one, it was the largest and most unbalanced piece I have turned to date. Originally I had planned to not use any resin in this piece, but unfortunately there was no way I was going to be able to hallow it out and have it stay in one piece. I also had a bit of a scare when part of the root caught on the tool rest and broke. I’m sorry I didn’t catch it on camera. It was pretty intense. I set my lathe speed at 450 rpm for the majority of this turning (lowest speed my lathe will go). Only raising it to approximately 600 rpm once the piece was cut and better balanced. I think I lost about an inch of my 5/8” bowl gouge turning this piece due to the constant sharpening. The inside of the root had lots of rocks and dirt that I just couldn’t get to until I turned it down a bit. The simple woodturning carbide tools worked great as always. The Sumi black pigment powder from Eye candy pigments came out amazing and really went well with the grain color of the piece. I finished the piece with Danish oil and polished with carnauba wax. This was by far the most fun I’ve had turning a piece and plan on finding more root balls to turn. The fact every piece is original and one of a kind is what I think makes it so special. Thanks for watching! Hope you have a great day!
#woodworking #woodturning #resin
Affiliate links
Simple woodturning tools
www.simplewoodturningtools.com?bg_ref=gkr80FMJN5
Limited time coupon code!!!!!!!!!
Square3
Acrylic resin simple start turner and hollower
www.simplewoodturningtools.co...
Acrylic resin simple start roughing tool
www.simplewoodturningtools.co...
Simple hollowing system with laser kit
www.simplewoodturningtools.co...
Super Clear Epoxy Partner
Superclear epoxy resin
www.superepoxysystems.com/ref...
5% off coupon code-SQUAREANDLEVEL
Eye Candy pigments 👁️
bit.ly/48vZNLf
Coupon code:
Squareandlevel
Sumi Black Eye Candy pigment powder-
bit.ly/3J5Qasr
@superclearepoxy
@EyeCandyPigments
@KerryHarrison-Woodturning - Jak na to + styl
![[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny](http://i.ytimg.com/vi/3G9MH063Cx4/mqdefault.jpg)
I was given this Almond tree root ball from a member of my local woodturning club. This is my first attempt at turning a root ball. I was definitely a little nervous about this one, it was the largest and most unbalanced piece I have turned to date. Originally I had planned to not use any resin in this piece, but unfortunately there was no way I was going to be able to hollow it out and have it stay in one piece. I also had a bit of a scare when part of the root caught on the tool rest and broke. I’m sorry I didn’t catch it on camera. It was pretty intense. I set my lathe speed at 450 rpm for the majority of this turning (lowest speed my lathe will go). Only raising it to approximately 600 rpm once the piece was cut and better balanced. I think I lost about an inch of my 5/8” bowl gouge turning this piece due to the constant sharpening. The inside of the root had lots of rocks and dirt that I just couldn’t get to until I turned it down a bit. The simple woodturning carbide tools worked great as always. The Sumi black pigment powder from Eye candy pigments came out amazing and really went well with the grain color of the piece. I finished the piece with Danish oil and polished with carnauba wax. This was by far the most fun I’ve had turning a piece and plan on finding more root balls to turn. The fact every piece is original and one of a kind is what I think makes it so special. Thanks for watching! Hope you have a great day!
#woodworking #woodturning #resin
Affiliate links
Simple woodturning tools
www.simplewoodturningtools.com?bg_ref=gkr80FMJN5
Limited time coupon code!!!!!!!!!
Square3
Acrylic resin simple start turner and hollower
www.simplewoodturningtools.com/knyydq
Acrylic resin simple start roughing tool
www.simplewoodturningtools.com/yio14f
Simple hollowing system with laser kit
www.simplewoodturningtools.com/ect9ii
Super Clear Epoxy Partner
Superclear epoxy resin
www.superepoxysystems.com/ref/squareandlevel/
Eye Candy pigments 👁️
bit.ly/48vZNLf
Coupon code:
Squareandlevel
Sumi Black Eye Candy pigment powder-
bit.ly/3J5Qasr
I like this idea of duping the description in the comments... borrowing. :)
Thanx. New turner and new sub. Something about the rootball really speaks to me. Not sure why. Maybe you are giving new life to a 'reject' or something. Not sure. Keep up the good work. Going to call my shrink now....
@@johnlivsey4146 haha. I totally agree. It’s basically trash. Would either end up in a landfill or a bonfire. Kinda cool to make something unique and interesting with it. Thanks for watching. Hope you have a great day.
I like turning stuff that shouldn't be turned, in other words, trash 😊. This one turned out great 👍@@squareandlevel
Is this for sale and how much?
Beautiful piece! Thanks for posting! 👏👏👏🏴🏴
I love the contrast - beautiful !! 👍 from 🇨🇦
WOW! That is beautiful. Thanks for posting!!
A WINNER, a thing of beauty!!!
Rey nice, looks like an ancient pot that is in perfect shape and ready for display in a museum.
Gorgeous results! Well done!
That is a beautiful piece of art. Thank you for sharing.
Oh My Goodness- it’s stunning! Such a delight to watch you create!
Thank you so much!
Extraordinary skill. I was transfixed for the whole process.
You are an artist and I love the smell of wood
WOW! Beautifully done 👩🏻🏫👵🏻👏🏻🥰‼️
Absolutely beautiful!!
Magificant! Beautiful. Marvelous work!
Thanks John! Have a good one!
Masterful! 👍🏻 Beautiful piece!
Thank you very much!
Wow! Glad you kept up with that after the piece broke off. That thing is gorgeous
Thanks! Hope you have a great day!
Beautiful piece!
I like the black, I use a lot of coffee grounds in my turning.
Ha! I didn't know anyone else did that!
@@davidhunt7519 lol, I really like the color and tone, smells good too
Sorry for late response. I’m intrigued by this idea and am most likely going to “barrow” it. Haha. Curious if you have any rough ratios you go by for coffee/resin. You’ve convinced me with the “smells good”comment.
Beautiful Vase Scott, what a challenge!!! You did amazing, great work
Thanks so much Mike. Really appreciate it. This was a fun one. Hope you have a great day!
Love your work, please keep it up. I'm learning by watching.
Thanks, will do! Hope you have a great day!
Wah wah whee wah ...!! ❤❤❤❤ Man, thats so beautiful !!!😮😮😮
Stupendous, I was so surprised when you stopped the lathe at the end. Thank you for sharing this journey with us. 😎
Thank you!
Good work man
Oh boy. I've never seen your shop this dirty 😊. First class work as always sir.
Haha. It’s still a mess. Deep cleaning time this weekend. Thanks for watching. Hope you have a great day!
I like the direction that this went. And the black.
Beautiful piece
just gorgeous! very nice work--- hope to see more from you
More to come!
That's absolutely beautiful
Awesome video Scott! This one turned out amazingly! Such a huge starting point too! Keep up the great work!
Thank you Cam. Maybe in ten years I’ll be able to make a video as good as yours. Thanks for watching man. Hope you have a good one.
Man look at that lathe shake rattle and roll!!! Beautiful piece, Scott!
Thanks Glen. It's really not good that the lathe is shaking so much, but that's the slowest setting mine runs at. Thanks for watchinf mate! Hope you have a good one!
Absolutely beautiful
All I can just beautiful keep up the good work
I'm enjoying your videos. You are doing some fun pieces.
Thank you! I hope you have a great day!
Now that sure turned looking nice!! I also liked your zip-tie trick for keeping the wood from floating while giving you a handle to lift it out of the pressure pot. I have found that roots do not always turn the same as the parts of the tree that are above the ground. They also seem to dry a little faster.
That is an AMAZING piece of work
Thank you David. Hope you have a great day!
Very stunning. Great job.
Thank you so much!
Stunning!!!
Very impressive, quite the job there !!!!
Thank you very much!
Good work❤❤
Thank you! Hope you have a good day!
Espectacular empecé a verlo para ver cómo quedaba muy bonito 😮
Man that's beautiful. Whenever I mess with a root ball I usually break out the pressure washer and blast away all the dirt and rocks. Works great and all the mess is outside.
Did that twice before I started. Still full of rocks and dirt. These roots were wrapped so tight the stuff just wouldn’t come out. Thanks for watching. Hope you have a great day!
That's true. You can blast the outside all day long and then 7/8th of an inch in after 3 min of turning... there's a rock. 😢
Absolutely amazing so very cool great job
Thanks Jim. Hope you have a great day!
Thanks hope you have a great day also. Loving your wood turning stuff looks awesome . Keep up the great job
Phil , that vase is beautiful, I can't believe that came out of that piece of wood.
Thank you, but who is Phil? Hope you have a great day!
New subscriber . .That was very impressive, never turned a root before. Think I will wait awhile before I try. I will be closely watching your channel in future. Keep it up.
Thanks John. I’m definitely going to try and find more. That was by far the most interesting bit of turning I’ve done. Thanks for watching. I hope you have a great day!
That's so amazing
Absolutely Stunning 👏👏👏✌️
Thanks so much 😊
Yep, got a like from me. A very interesting video and I thank you for sharing 🌞
Beautiful x
Well done .
Beautiful 😊
La finale est magnifique le bois et une matière noble bravo félicitation pour ce que vous faites 👌👌👌👌👌👌👌👌👌👌
The prep work before it even gets mounted is crucial. I’ve hit a stone inside one root system before
When you first start carving, it scares the 💩 out of me! But wow! The end results ❤
Thanks Scott. That was a fun one. Have a good day man
So nice to look at.
Beautiful
What do you do with the shavings that have the epoxy in them? I normally put my shavings out as mulch around the trees, but wouldn't do that with epoxy for obvious reasons.
I am curious to see your method of reuse or disposal.
Thanks for another great video.
Very nice indeed and a good length of video too! Some people like to talk more and make the video more about them then their turning 🙂
Получилось великолепно....💜
Красиво и оргинально 💚
Truly beautiful - made me think of antiquities - like you'd find in a pyramid.
Great looking piece Scott. Really enjoying your videos, please keep them coming. I thought that yu may have used the top piece you parted off as a lid (not that it needed it). Thanks for sharing Cheers
Bruce
Thank you Bruce. I considered that exact thing with the lid but eventually decided against it on this specific piece. Will definitely keep it in mind for the future. As always thanks for watching and I hope you have a great day!
Excelente trabajo realizado
Well done
Love it!
Hermoso trabajo!!!!!!!!!!!!!!!!!!!
Amazing is right, thanks for sharing. Full View and Like 👍
Thank you too!👍
Boy, oh boy! That was one screwed up, pot bound tree! What type of wood was it? I used to dabble in marquetry and loved all the types of veneer available. I just loooove wood! This is like polishing a raw opal. You can’t wait to see what you uncover. It’s magnificent!!!!❤. From junk to jewels!
Bravissimo!
Não me canso de ver seus trabalhos ,e as belezas que você produz ❤❤.
Looks good.
Lovely ❤
Absolutely gorgeous! Fantastic work on what I would have thrown out to burn!!
You have great talent and a creative vision!!
Thank you so much!
Nicely Done Brother! I would imagine it took a lot of effort to make this one happen.
Thanks! It did for sure, but well worth it. This was a fun one. Hope you have a good one!
Awesomeness
Awesome
This is my favorite of your pieces so far! Good job! I am wanting to do this with table legs for some of my pieces but a 16 inch tall pressure pot seems like what I will need to stop from waisting epoxy. I think your simple tool affiliation is a plus and if you could explain what each tool is and does on a video that may be a good video. I turn mostly legs and have no idea the techniques involved but do enjoy. thanks
Thank you sir! It's one of my favorites as well. I'm on the fence about doing a tool video for multiple reasons. We will see what the future brings. Thanks for watching! Have good one!
Beautiful piece, have to agree with the comment below about color choice. With so many colors, why black?
Love this piece! Couple questions! What 5 gallon pressure pot do you use and what are your thoughts on it? It looks like a TCP Global. I’m wanting to buy one but keep reading how these pots don’t seal correctly out of the box and that has me hesitant to spend that type of money. Any advice/info will be greatly appreciated!
Thanks for watching! This is a CAT pot and this was the first time I used it. It was a little cheaper than the tcp global ones. So far I really like it. It was perfectly sealed out of the box. ( I pressurized it and sprayed all sealing points and fittings with soapy water to make sure). These things are wayyy over priced in my opinion but especially the ones for “resin casting “. They are the same as the paint pot ones with parts removed and then they charge more money for them. The first one I bought was a vevor paint pot that I modified. It was $70. It’s just a little on the small side. But I’m happy I now have two to work with. Hope that helps a bit. Have a great day. I’ll leave a link to the Cat 5 gall. One.
California Air Tools CAT-365C 5... www.amazon.com/dp/B017BXZ8B4?
@@squareandlevel Thank you for the insight! Keep up the great work!
That turned out great! Good job. Do you prefer an inertia sander over a power sander? Thanks.
I use both just depending on the piece. I had the inertia sander out from doing the inside of piece and just kept using it. They both work great tho. Thanks for watching. Hope you have a great day!
Nádherný 😍❤💯👍💯❤😍
Had dinner with your in-laws Tuesday night and we're all in agreement regarding your skill and creativity as a craftsman and artist!!!!!!!
Thanks Nick. Think I have a ways to go on the whole artist thing. It sure is fun though. Appreciate you taking the time as always. Hope to see you soon. Have a good one !
WOW!!!!!!
Is that a pressure chamber or vacuum chamber? Or both? And by the way I think the black is perfect.
This video I used my new pressure chamber. It is currently only set up for pressure. My old one is set up for both pressure or vacuum depending on what I’m doing. Thanks for watching, hope you have a great day!
I'm not a woodturner, but find it so relaxing watching a craftsman create something beautiful from something so mundane. I'm curious though how you ensure that the thickness is the same down the sides when you are hollowing the inside. Probably a dumb question I know.
Hi Tony. Not a dumb question. There is a laser attached to the hollower set up I use that points down on the outside of the vessel being turned. It helps to reference where the cutter is on the inside, making it fairly easy to obtain a uniform thickness throughout the piece. Thanks for watching. Hope you have a great day.
Wery nice
Красота.
Wonder Full, Top jop, Perfekt,
Dude, that came out amazing! Nice job Scott!
Just getting into turning myself. I know you do some work with Simple - as a beginner, that has already dulled his cheap set from Amazon, what to you suggest for a set? Want to get the nice stuff that will last forever now :) Thanks brother!
Thanks for watching! As far as tool recommendations, it really depends on what you want to turn. I personally like the full size tools that are for turning with resin. They have negative rake cutters and still work good if just turning wood. They would not be ideal for small detail work though. I have little interest in making pens and very small pieces so the full size tools work best for me. Simple woodturning tools have multiple different sets available depending on what you’re looking to do. I personally bought the full size AR STH tool first because I wanted to make sure I liked it before spending money on a set. I now wish I would have just bought the set to begin with. They really are high quality tools that work great. Hope that helps. Have a good one !
@@squareandlevel Thank you my friend, much appreciated! I don't have much interest in the small things... although I do have a small lathe. Looking for full size tools to do both wood and resin (have a couple of resin handle projects I want to do). So I'll take a look at their sets!
Yep, Ii knew the resin was coming.
Beautiful. But I don't get why almost everyone uses dark resin. In a case like this, where you had to use resin to hold the root ball together, why not use a resin more transparent, maybe even clear so you can look into it and see the root ball. Those twisty roots are the best part.
DENNIS DOLAN. ciao Dennis il tuo è stato un ottimo punto di osservazione, ma senza la resina scura si sarebbe perso quel tono di antichità Etrusca che abbiamo qui a Roma.
Opinions are like...well you know what they are like.
@@johnrains8409 Continua con il tuo modo di fare, non contesto mai l'operato degli altri perché ognuno di noi ha una visuale del lavoro diversa dagli altri, anzi cerco sempre di carpire i lati migliori, quindi buon lavoro di tanto in tanto questo filmato me lo riguardo perché sicuramente è costato tanto di fatica che di attrezzatura. un caro saluto da Roma
Why not use a larger forester bit to start with?
That’s the largest bit in my set. Thanks for watching, hope you have a good one!
My husband loved turning wood. Pleasure to watch this. So much work and a little danger even! But a gorgeous result.
BRAVO!!! no music
Очень красивое изделие из сучковатого корня.
Do these wood turning channels make anything other than vases??
Nuostabus meno kūrinys.
Linkiu sėkmės kuriant grožį.
Linkėjimai iš Lietuvos 🇱🇹
Any chance you are taking apprentices?
Haha. That would be the exact meaning of the blind leading the blind. I’m sorry. I am no way knowledgeable enough to teach anyone. Thanks for watching. I hope you have a great day!
@squareandlevel I had to try. Thanks my friend, you as well.
7:29 in, I got a bit concerned about the final shaping…😂😂
I got a bit concerned when editing this video because of that exact reason. You are the first to point it out and I’m sure not the last🤣🤣 Thanks for watching. Hope you have a great day!
Hi Phil, lovely piece as usual but I disagree. I think it looks like a pumpkin with a face & stork at the top. Thanks for a great channel. Dave
🇹🇯🇹🇯🇹🇯
the thumbnail looks like a basset hound, lol