Old Three Wheeler Sitting Outside For Years. Will It Run?
Vložit
- čas přidán 10. 09. 2024
- I buy a rare Yamaha Tri-Moto 175cc 2-stroke three wheeler and try to get it running after it has been sitting for years. #Yamaha, #2Stroke, #Trike,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
The smell of blue smoke , the sound , aaawwww a 2stroke memory of my youth in the 80’s. Thank you
I bought one of these Tri Moto 175's new in the early 80's. Blew a piston riding through wet snow and slush across a lake. Warranty covered the repair:). My first new 3 wheeler was the Tri Moto 125. Good times!
Goverment: Let's ban 3-wheeler production, those are too way dangerous! Guys on CZcams: We will fix all the old ones & build some new ones too! 3-wheelers one love!
Heck yeah they even have a kit to convert the Honda 450 dirt bikes into a three wheeler they're pretty badass too!
@@kevinAuman1 I've seen this vid! ;)
@@kevinAuman1 I built an xr200 into a three wheeler😭
All the world needs is builders to create. The ban won’t work if they cant catch them
@@kevinAuman1 for real cboys has a crf450 3 wheeler that thing is crazy
but nowdays they are still dangerous but less cause you make the rear WIDE AF and its already better. love how the cboys broke that engines multiple times cause the air filter is a cone filter near the rear and they went full send tru water, and that is why you want and need a air box...
but also there is this channel on youtube that build trikes but also transform bikes into quads they make a crf 450 quad that is just crazy
This one deserves some new tires and a seat cover joe
I had this exact 3-wheeler, it was such a blast!! Thanks for bringing this one back to life.
Same model or you literally owned this exact machine before 2vintage?
@@heathwak3030 same model. Sorry for the confusion.
I had one of these as well, I thought it was the fastest thing on the planet as a kid lol
Love to see the old stuff come alive!
That deserves a full restoration
Of course you’d have one of these on now, one week after I sold my ‘82 175… bought for $100, seized engine, new piston, rings, pull cord spring… sold for $1000
Every video wheather it runs or not never dissapoints with knowledge alone 🔥
That was the only three wheeler that I’ve owned. I had so much fun with it and almost makes me want to buy one if I had a place to ride it. Great video
adjust the clutch that will fix it slipping it’s behind the cover where u check the oil
I remember when they used to sell them in the Sears catalog crazy to seeing one again💯💯💪
there fast but unusual for the atc rider i rode one on a whole summer so i got used to the handling very fast little bikes
I bought a 2005 crf150f and there was a huge nest in the air box and 2 dead mice. Ram like a champ tho. Still smell of decaying mice, they literally melted, it was fun cleaning it out
I had this 3-wheeler as a kid and Honda 125M 3 -wheeler !! So badass that you take the time out to fix these awesome machines 👏🙌🤙
Thanx for the warning for headphone users when you turned the vaccum on shit my dude lol ,"huh, what you say?"" Ha ha
haha sorry I didn't realize it was that bad. I don't edit with headphones on. My bad!
I just started fixing my tri moto 175 that was my dads when he was my age and it has been sitting for 27 years
Those had the weight really far back in the chassis.
I have had good luck with a few ounces of ATF in the old tires or good old fix-a-flat to slow/stop leaks and get more life from those old low-pressure tires.
Especially since it's so important for the tire OD size (pressure) to match for the back on a live axle rig.
Great job!!!!
Yeah, riding a 3 wheeler with a flat back tire definitely takes some skill. With enough seat time Joe, you’ll learn how to nurse an atc home with a flat rear tire…..it takes balance while standing up on the pegs!
This is probably my favorite video
Wowww what a score for that cheap!!! Even if it needs a rebuild hell that can be done for almost nothing on these old 2 smokers lol
Love the vids man! Actually the trimoto 125 was made from 1979 till 1985. I have a really nice condition trimoto 125 1985 with all original tires and stickers, love that little thing.
The YT125 was made 82 and 83. The 175 was only 83
@@phodailey nope ,talking nonsense bud
@@originalbbz7978 I thought wrong lol. The 125 was made 80 - 85. I'm not entirely sure but I'm pretty confident the 175 is only 83
@@phodailey not sure about the 175 never had one. But I know the 125 inside out lol ,it was made from 79 till 85.
The mouse brain tho ha ha ha 😂
Yeah so gross lol
That things is in good shape, I’ve never seen a 175 in that good of shape
Thumbs up 👍 for the hacksaw shifter repair. I have done the same thing a few times in the past ha ha
Worked pretty well!
Shifter shaft shakes. Shim the shank from shimmy!
Those little 175s were quick. Good find..
any three wheeler non honda is a rarity! keep up the great work, i love the vids. you have inspired me to start workin on atvs. jus bought an 01 rancher for 200 and now it runs again!
Out of the tri motos that 175 is the rarest one produced. The 200cc the 1985 ytm 200cc was the rarest. Only year they made 5 speed, with reverse, electric start, shaft drive, and telescopic front forks
86 200ers is rarest
i do want to go out and buy a cheep bike and fix it you make it look so easy it gives me corage to do it i at least watch two ove your show every day
Oh wow I had the 125 growing up
I love those old three wheelers. You should try and find a old 125 Suzuki three wheeler
Once I saw that spark, I knew you were in business. Great job.
it's amazing the places that mice can get. that gooey thing at the carburetor 🤢🤮
Yeah so nasty!
Definitely old dead mouse 🤣🤣🤢
I had a 225 with a twist throttle! Loved it !!!😃👍👍👍👍👍👍👍👍
Rearward mounted engine + 3 wheeler= wheelie machine
I just picked up an 83 yt175 a few days ago, albeit in a lot worse shape. Will definitely try what you did with the shifter as mine has even more play than yours did
Safe to say that carb is definitely going in the carb dip for awhile! That was some nasty crap in there. The oil in the carb likely leaked past the pump and check valve if it sat for a long time. My H2 Kaw triple used to do that if it sat for awhile.
Thanks for a cool video, Joe!
You had an H2? NICE! What a sound that machine makes.
I just picked one up this march for 300 bucks and it's about the same condition of yours. I have the headlight guard on mine.
You wanna sell me one of those quads you fixed up? ill come pick it up.. not kidding.
One thing I found in life if I ever came across any oil injected machines I would remove the oil injection and mix the gas myself ! After blowing 3-4 engines mostly Yamaha after rebuilding remove the oil injection and the motors would last for years ! It seems most oil injection systems could not keep up at high rpm !
aways premix and block off oil ports so dont have a air lean mixture my first 175 had a broken oil injection line
i have an 83 honda 200. its way more reliable than the mid 90s polaris sportsman i have.
I had to take a link out of my chain before on my Honda. Three wheeler worked pretty good.
That's a great find for sure. Speaking of rare wheelers I picked up a 84 Manco 310 Quest. Still has the original tire's on it and is in great shape. I'm the 3rd owner
That's awesome!
Yamaha dt175 has the oil pump as this bike and same spot just a fun fact
That's cool!
Yeah I have a 1976 dt175 and I'm picking up a yt125 tmr
Maaan I'm jealous. I just paid $500 for one of these in horrendous shape. Massive hole in the pipe. Has compression and spark but doesn't fire. Not even a pop.
Nope not the original tires my man. The rears were matching with your front tire, a dimpled knobby tread was OEM. Own 2 of these things and was around when they were brand new have one as a kid. The one I'm building right now is a Franken Trike for better handling and more comfort. The neck was removed and raked to 24 degrees which matches the Honda 250r frame layout and using triple trees and the entire front end off a trashed Honda 250r. Engine has been fully modified and built for performance. Custom crank, welded cylinder deck and installation of a Yam DT-175 jug with the best of the cylinder heads from 85 with the center located spark plug and shaved for higher compression as we as ported mildly. Using the larger reed cage of the DT and a custom intake and boot running a 28mm Mikuni round slide. Clutch was modified for a higher stall speed engagement as well as the DT cylinder was modified, they had great transfer ports but a poor exhaust port design. Welding up the top of the exhaust port on the outside and the removal of the restrictive blockage of the original casting was removed for a free flowing downstream system. They run pretty well though even in stock trim when they aren't beaten into the ground and left for dead! Lol.
Have you tried using a turkey baster for feeding fuel into the carb fuel line?
They are also good for sucking out water / oil ect out of bottom end of 2 stroke engines.
Handy to have around.
Zoom oiler for gas only way to go. Use mine all the time.
You need a upgrade to a 6x12 enclosed trailer! Fits 2 Quads...
Used to have one of those, very good shape except it never ran right consistently, but when it ran, it went!
Great job on that old pig, lucky it ran so easy, sat a long time.
We just got one. The thing is a beast!
Yess. All the 3 wheelerssss!!!
Would have liked to seen a part 2 of the next oil change to see if there was any more metal flakes from the grinding you predicted
The shavings were probably clutch.
I had the earlier 125cc and a 1983 yz125 dirt bike. how anyone made it through childhood in the 80's is beyond me.
This video was my CZcams highlight today. 😄
All the 175 engines back in the day ran forever!!
mines still run at under 90psi runs great starts good to
The 225dx is a blast I love mine
Not reading the spoilers in the comments...😑
Of all the ATCs I’ve ridden those were by far the most unstable lol, quick little bikes though we had two we used to take down to Mexico and ride on the beach, anything other than flat ground they were a bit of a handful, Honda definitely had the handling figured out way before Yamaha, those little 175s definitely hauled A$$ tho for such a small ATC lol
That was put away with the old non ethenol fuel or it wouldn't look like it does. Once again great job.
My friend has one of these 175 and it’s mint thing can pick up and wheelie every gear absolute animal
The one you got doesn’t even come close to how good my buddy’s does I think if you really took time to rebuild that motor you’d be surprised on what that thing can do
@@ZachsUpOnOne bigger small sprockets and bigger tires kill the power on these
@@EwFatppl idk his revving out sounds like crap compared to my buddy’s ik two strokes are finicky but I personally think that thing is whooped
I had one those it was a blast an the best bang for the buck. It was a 1983 yt175k model tri moto
If it's a Yamaha it's good! 👍
Have to give mice credit. They pick the coziest places to build their homes.
I have a blue yamaha trimoto 200cc trike and it's my favorite lol the capability of a dirt bike and quad all in one.
I find it's easier to use a wrench on the plug socket in tight spots rather than fighting the watchet in there.
As others have said Yam Dt175 motors almost bulletproof and will shrug off plenty of abuse. In '78 they revised the model with a monoshock rear, cdi ign, lighter plastic components and a six speed transmission to make a very popular and successful trail bike, more nimble and responsive than the rather heavier and slower revving 250. Wondering if your trike has a 5 speed, as it probably weighs more?
its a 5 speed they all are except first gen yt125
I cut one of them up years back and put the engine in a cage-kart. So easy to transplant and work great for that type of thing. It was crazy fast!
Hey U can use this trick to know if an engine is gonna run you don’t even need a carb on the bike to do it u can drop fuel down the carb holes on 4 strokes too and down the cylinder of 2 strokes more common on 2s but not a lot of people use it on 4s
The shift levers on those are jenky.. have fun.
Favourite youtuber
Those metal stick valve stem bar tools come in handy for replacing them with to. They pivot to pry down to pop them through the rims very easy to with. A little bit of soap they will pop through until it seats into place when the stem is to the putter rim edge. Just make sure that area is cleaned up good first. Before reinstalling A new replacement vavle stem in it's place. Yes those tires needed replaced A very long time ago. A 1/4 cup of kerosene to presoak into that muffler.& then burn it out good. After the exhaust has been removed from the engine will bring up the tourche.& horsepower to. I remember that three wheeler growing up years ago.
Love the custom seat cover (duct tape), every ATV I ever worked on, the seat goes to crap,in just three years or less
OLD SCHOOL NO SUSPENSION TOO MUCH POWER... GOTTA LOVE IT!
These things are getting harder and harder to come by and they were fun as hell to tool around on so I'd either hang onto it or make sure you ask a decent price for her, heck I'd say running and a new sear cover it should fetch close to a grand for ya!
yeah i mean if he got it cheap why not keep it in a corner for now. if its rare sit on it make it like new.
keep it oem, the tires oem... just fix it
@@reggiexp69 those tired are not oem
@@EwFatppl my bad i tought so... they look like some old ones didnt look it up
@@reggiexp69 those are trail pros they suck and are heavy and to big for these they also slow them down to and they barely wear out
@@EwFatppl oww that is why they look old and wierd so i guess they were oem.
My mate had a Honda 3 wheeler! We all nearly killed are self’s at least one time riding it! Good day’s.
Not going to lie I go straight to 2 vintage to see new videos when I get on CZcams and get a hour or so free time I’m doing a crf 450r and pw50 into a 60 cc
Omfg....that was my 1st 3 wheeler then I graduated to ATC ..250 R...now the was a rush
The tri moto 175 was so fun growing up on.
Just got a tri moto 175 yesterday. Perfect timing.
The play.in the shifter was like that when they were new
"sweet" got the old it175 engine on it. Remember when kids were running around in their backyards and and the trail
Nice little machine. Thank you for letting it live for a bit longer.
Seen a few 200s and 225s for sale cheap in Michigan lately. The 175s are pretty rare anymore.
Yeah I see the 200s and 225s up more than the 175s.
Had one in 1986 also a trimoto 125
That is so tiny, a Playskool my first three-wheeler
The way your wrench snaps up in the air when your removing the spark plug and taking it off the socket, I did that and hit the crossover fuel line on my Yamaha which is exposed above the cylinder head and gas was spilling everywhere haha
Feel like every young up an coming mechanic should build one jus for the exp 😂
I have a 1977 commuter industries granger 8 hp comet torque drive I wouldn't let it for less than 1,500 super reliable and fun
Man thats cool! You should fix it make The plastics shine again and fix The flat tire. Love to se old 2 strokes Come back to life! Allso you should se if you can get a front light on it since it wasnt working. Great vid 👍
Looks like a blaster engine
Awesome videos man
.look forward to watching them every day after work
Just got a 08crf250r. Gas has been in it since last fall. Starts fine, idles fine and no bog. Once you get into the mid rpm’s the bike spitters and looses power and gains the power then looses it again. In the high rpm’s it’s fine. Anyone know what’s going on here??
clean carb replace gas
Can't believe that a 3 wheeler that old didn't puke the crank seals right after you got it running.
How do you know if crank seals go bad on these?
@@opengate5849it will run lean ,or not run depending on how bad the are cracked.
Saw this on your Instagram been waiting for this video s
Mouse juice cant be good for the carb lol
nope not good at all lol
Tires are tubeless Joe! Bad seal or a hole in tire of some sorts.
The original oem tires were the Dunlop knobbies that would have matched the front tire on it.
I got one of these, bought it a couple months ago, thing is a blast and kinda fast.
The seat is a masterpiece. Have you ever opened up a air box that had been sitting outside that was in prestine condition? Runs supriseing good.