Video není dostupné.
Omlouváme se.
Trashed Yamaha Three Wheeler - Will It Run?
Vložit
- čas přidán 8. 12. 2019
- 1985 Yamaha 3 wheeler. Bought it for $310 Will it run? Part 1 of potentially 3 uploads. This bike feels good. Let's dive in
MY GEAR / Shopping on Amazon? : goo.gl/YcPzCL
Shopping on Ebay? - tiny.cc/dve3gz
⚠ My Merchandise ▶ machinemerch.com / 3dmachines.co/
Instagram : 3d.machines
FACEBOOK: / 3dmachines
SEND ME CHRISTMAS PRESENTS:
3DMachines
PO BOX 122
Gowanda, NY 14070
United States of America
the good old 3dmachines videos stile, I really missed them!!!
*style
Just a tinkering in the garage on a, WTF happened to this machine..... loving the content kind of back to the old days type of vid
@8:47 I love the reaction when these old Yamahas just work 😂😂💀 you really can’t kill anything they make.
I rolled one of these as a kid doing a half ass jump & jammed the foot peg through my lower calf, 50 stitches later I was good as new
This is the Dalton us original viewers know and love
MarMotoring yes dude it’s been years since of watched I forget how I use to watch him every day
I agree 110% as a teen in the 2000s this is what I did for fun. I'm glad to see him back. To all you teens now wear gloves!!! when wrenching. My bike mech instructor in 05 had the hand shakes and told us to wear gloves. If you can't ride what you build what is the point?
I need a 3 wheeler dang
Get a 250r
Eyy Fooligan hi
Honda 350 r
@Jerred Leatherow anything for free
@@thejdmworkshop9302 amen.... There's one in my garage that I just fully rebuilt.
Love the old yamaha 3 wheelers, my dad had a black and gold 225dx. I still have a Tri-Z as well, definitely hyped to see where this project goes!
Soak that slide with pb blaster. It has additives wd40 doesnt that will break down the oxidation on it
When I was 8 my stepdad bought me a Yamaha 125. That was in 1980 I miss it. Lots of fun
Old fuel makes slides stick my guy,
Screwdriver pry up on the slide gently from the carb opening
I like these videos...less show boating...more the real you😊👍
One of my first bikes around 8 was a clapped Honda 3 wheeler with no brakes and I got it runing with the spark pug from my weed eater bike and pop starting it
Only way to stop was to down shift
Good times dumb parents
I think i'd need brakes on a 3 wheeler. They're sketchy enough with brakes.
3DMachines yeah this is why I have learning disability’s now xD
Jk seriously thoe wtf were Thay thinking even if my kid paid for it I would not let him ride that old death trap
But shit we were poor 🤷🏽♂️
Good video. This is what got me hooked years ago. You tinkering with the play by play. Keep it up man.
It's awesome to see people restoring these 3 wheelers. I still have my 1984 Kawasaki Tecate 250. Love that beast!
Had a slide stuck in a carb last year. Used brake cleaner, and it slid out after about 10 minutes of sitting. tried WD40 first, with the same results. Cleaned it all up with carb cleaner, and still runs great today.
Stay tuned to see how mine comes out.... Uploading tomorrow
@@3DMachines I'll watch for it! Good luck bud!
4 likes 0 views
“CZcams is fine”
It just got posted today🥴
CZcams is doing y’all a favor
Please, upload more, i miss the videos badly
I want to upload a lot. Catch up on everything
Thanks!
I remember going with my dad buying a brand new Trimoto 225 at the Yamaha dealership just like this one ! We loaded it in the trailer behind my dads old honda civic, we went to the woods near rapid lakes, my dad started the three wheeler my sister hopped infront I was in the back. We where rolling for about 10 minutes my dad did a quick turn and the ATC tipped and we all fell to the ground. I had a broken jaw my sister a broken leg and my dad had a few scrapes and burns... It was the end of the three wheeler my dad sold it and never ever bought trikes or quads again ! He felt so bad for all these years.
These things are a beast i had one and it never let me down
Dalton is turning into a Mustie1 👍👍👍
I clicked on this video without looking to see who posted it. I legit thought I was watching a Mustie1 video for the first 10 minutes
Those were great machines, better than the similar sized hondas of those days. My buddy growing up had an identical one except his really was trashed. That thing you have is near mint! Anyways it ran forever took beating after beating untill the frame wore out where the swingarm bearings would normally go, he rode it without any to speak of for years and destroyed the bearing housings on it.
Easy pulling on that carburetor soak the thing in carburetor cleaner spray in the slides will release you pulling a hard enough and you'll break your cables or worse and everything is stuck because it's been sitting probably 10 plus years or 5 plus with ethanol fuel
So now, Dalton is a part-time youtuber and a full-time mechanic ??
Well when you delete all your videos and turn into a "singer" for a month, it kinda destroys your fan base.
Nope. He is, was, and always will be a business man/hustler. Mans gotta eat
making more doing that then being full youtube so why not?
Hank Jones is that a trailer park boys reference 😂
Chase-hahahaa not that i know of but i picked it up somewhere.
The wheels are offset see if they can be switched from side to side it's a good machine I had a 83 lots of fun to ride only problem I had was the ujoint
This 100%. Those u joints and yokes kill alot of these. 225dr u joints are bigger and barely fit in the housing, but they are cheaper and last longer.
After not really watching many of your videos for the past couple years(subcribed since 2016 tho) i enjoyed this one alot. Its wild how fast time goes by, like the content and the more matured you. Thanks dude
Love the video's 3Dmachines keep up the good work 👍 👍 👍 👍 👍
The best three wheeler ever made was the Honda big red.
You spelled Kawasaki Tecate 3 wrong
Fred, U were right after U said Honda.... No need to mention the model... LOL!
I love the 350x's
@@xRamRacing 😂
Hard to believe but I've had really good luck using Pine Sol for cleaning carburetors just let it soak and it'll eat every bit of it really cleans aluminum also and it's cheap and will not hurt your gaskets at all
I’ve rode a 3-wheeler all my life it’s one of the few things i know how to work on almost perfectly
My dad used one back when he was a lifeguard in his prime time!😂 hes 73 now and doesnt look 73 at all! No grey hair yet still waiting on that😂 love your videos keep em up!
My edit: they quickly started hating them! For obvious reasons. For them tipping over so easily. Three wheelers kinda ruined atving for my dad which is sad!😥
My brother and I had this 3-wheeler when we were kids. If memory serves me right the OEM tires were not as wide as the ones on your machine. Ours seems to have more clearance on the battery box. I have great stories and memories from our adventures on the 225 DX.
Your right OEM e the same size as the ones he has but they r shaped differently more of a balloon shape I have 2 of these one with OEM tires and one with the same ones he has tires say they e same size but OEM from the back look taller and skinnier
@@markburns8216 Yes, that is how I remember it! Fun times though!
PB blast it and try prying the slide with a flat head screwdriver. Its worked for me before on my 1981 honda 180 semiauto pull start
lever that siezed slide out with a big screwdriver. It would pop right out. one it a thousand times & you got nothing to lose, The fuel turns ransid and becomes like superglue.
That's why when I do a deal I always have the seller count up the cash. No bullshit "oh you were $20 short" shenanigans.
Wow I wish I could find one for that price. I found a 200 YTM in a scrapyard but the engine is seized and the axle assembly was shattered. I just bought an axle assembly for $50 so I have $100 in this awesome three wheeler and I have Marvel mystery oil in the cylinder...
Haven't messed With many carbs like this..the throttle is seized from rust,etc gotta pry it up through the hole you were prying from but don't scar it up
Best video of yours I’ve watched in a long time. Really enjoyed this one.
Hell yeah some good old 3d machines content just like in the old days!!
Back to your roots. Good Job Dalton.
gas turned to varnish then hardened up solid
Awesome video(s) ..Hoping to do a restore on a 3 wheeler some day like this !
& yeah haha PB Blaster is way better that wd40 XD
What happened to this channel?
Love the return to old days videos
I recently bought a 20 horse Honda GX620 v-twin engine that had been sitting unused for several years and when I checked the oil it was very black molasses-like and reeked heavily of old varnish (exactly what old fuel does), the shit made me choke. After draining out the oil I pulled the crank case side cover off and lots of thick molasses sludge left behind. I used a full can of brake cleaner alone in hosing out the case, side cover and its oil galleries and also I pulled the oil pump out and gave it a good cleaning. NO way was that engine getting started up with that molasses.
Wow. Sounds like a sticky situation.
hey dude, long time no watch, haven't since prince died, i still miss him.
One of the most garnished carbs I've seen, good thing it comes right off with carb clean water corrosion in carbs is a whole different story lol, awesome bike super fun project bike that's still in amazing shape love yours vids keep these ones up haha
I hope the cables unseize
@@3DMachines should but the real question is when will they fray and let go haha if not it's a small quad I'm sure ebay or amazon has some cheap cables if all else fails
Use spray bud not a screwdriver to pry the needle to unfree the throttle. Great channel bud.
Good idea ordering a carb, but to get that thing freed up you need to get the good carb cleaner that's sold in a gallon paint can. That old gas basically turned into schlack and the cleaner will eat it up.
Varnished carb.. paint thinner will maybe work if you soak it long enough. As soon as ya pull it out of the thinner pull the slide n choke out.. maybe.. if you still decide to keep that carb. Then wipe all that out. Paint thinner kinda melts that stuff away. Like tar after you soak it.
You never bonded the wires. Shrink sleeves are just for protection. It will corrode. Love the content! Keep it up!
I got my beanie and hoodie a few weeks ago and I’d just like to say top notch Dalton keep up the good work
Things were definitely made a lot better back then I’m still running a 200es big red
Does yours ever over heat? Mine used to.
3DMachines ya when it’s like this past summer wicked hot but day like today runs like a champ
Hey 3DM!! A PZ27 or PZ30 clone carb will go on if U make the holes on the carb a little wider,
Did you say you welded the cast iron bracket at the beginning? How did you keep it from cracking and how long did the weld hold? Welding cast can be done but it's tricky. I pack it in sand immediately after welding to slow down the cooling process
for the carburetor try hot water to un-seize it, had the same issue and that worked a charm for me
Back to the old ways!! Keep it up man!!
Reminds me of my blue 200cc I had, but no rear shock was rough!!!
Love watching his videos just wish he uploaded more then he does like he use to but I understand he's a busy guy
Luv the vid man......I got 2 of these trimoto's....1 is identical 84 yellow DX, other is a 85 black/red/gold DR w/ reverse. (would sell to the right person)
Did you just put the wire and connector together with just heat shrink?
I have a 3 wheeler similar to this one but it has no power. Had it running off jumper cables and accidently shifted into first and touched the cables now I have no power what do you think it might be.?
U are the best youtuber ever i love your videos and your channel
Great find Dalton.. Three Wheeler's are awesome..
Carb cleaner works good on that old hard varnish but will destroy rubber seals and plastic parts. If you could soak it (submerged) in kerosene or mineral spirits a few days that might free everything up.
I didn't finish the video yet so maybe you get it, but that lever you were playing with on the head is the decompression lever.
Next time your having issues that bad with varnish and stuff being jammed domt be afraid to place stuff up with carb clean it will break it free the quickest
I'll do that too. Thanks
Take the throttle cable off at the handle bars, then ultrasonic!! 👍🏻🖐️🙂🇨🇦
Love that you have posted! Been waiting for long! Always loved youre vids! Have seen all i think since you mande the racing mower
Trashed? Looks mint hasnt been ridin since the 80's
They didnt have reverse until 1985 and they were the 225dr, and DO NOT paint that headlight bezel yellow, the blue ones are hard to find, sell the blue and buy a yellow, also the tank shrouds are off a ytm 200, the decals are different
"the sidewall's shot but still got pretty good tread" LOL....Trailpro's tread is made out of the hardest rubber known to Man. Those probably have 35K miles on them with another 100K left 😂
DALTON-Put the carb, throttle cable, and all in the ultrasonic cleaner... Put the damn handle bars in too if ya have to. Hahahaaa
did they ever change the oil or use a fuel stabilizer?
great project to watch
Love their videos. Great to watch. Hilarious comedy. Camere girl adds good content. Love the work they do..
Those Carlisle trail pros are the best tires for snow I ran mine at 3 psi
I have a 1988 Honda fourtrax the mechanics told me I need a new cdi box or the quad will never start is this true pls help.
Stuck carbs is a yamaha thing, my choke got stuck on my ttr from a few years ago. I think its a bad quality aluminum corroding to steel parts from the choke and the slide needle. I have also seen that in a lot of tecumseh stuff, just poor quality materials id say.
Wheelie monster! love mine
It better be.
3dmachine i dont think you understand thing is slow as balls but 3rd gear just nail it and your doing a wheelie no joke
Should have soaked the carb in your ultrasonic cleaner with the cables still installed into the carburetor. It'll free up the gunk holding up the slides.
I traded it for a scooter And I have wonderful spark but my carburetor is the same exact way I even had trouble taking the carburetor apart the same way
I had the same problem with a carborator on a quad, i got it loosen up by heating it a little bit, my guess was bad petrol dried inside or soemthing. hope this helps someone else then me :D
I have a trashed tri moto and it looks way worse than that and empties the crank case out the tailpipe after running for a few minutes.
Hey 3DMachines. I have the same problem with the throttle on my 1982 Honda Z50r. Hopefully you find the solution to this problem!
Hey turn your CC's on for your viewers who might not be able to hear as well as everyone else please, thanks!
Also put the carb in a sandblaster
Great Content Dalton! Thanks!
i just bought a honda 3 wheeler motor and i'm trying to stick it on a gokart frame. coincidence
Don’t forget to order the cables !!!!!! O and the coil o and well just buy everything your going to need it ,good vid tho !
great video
The stuff my uncle did on those Yamaha three wheelers
I tell you what after I seen this video The same day you posted this video I got a 1985 Tri motor
Whats up Dalton!
Getting ready to eat some lunch. You?
7:37 that front tire looks sooooo fatt!
Thank u Dalton I was entertained
The privous owner taighten the carb to hard so the carb has been oval and is destroyd:(
I did that to on my Honda mt50:(
The only thing to do is a new carb:(
Btw Loooooooovee your videos man keep up the good work, you make my days everytime you load up something.
Lots off love from Sweden💪🏻
i used to have a 1984 Yamaha 200cc ATV, I always cracked up at the seat....SHAFT!!!!!!
It even has the same rear plastics, thats crazy
What happened to the Jeep build ?
What happened to the shop
225 ytm is a fun wheeler... if the clutch in it is half decent u would probably like it;)