Worlds Fastest Shingler Bustin' it out
Vložit
- čas přidán 4. 11. 2020
- This channel is for educational purposes only. The methods taught in these video's are just a few of many ways to do construction. Use your best judgement of what will work best for you and what is required by code in your area. Like, subscribe, and hit the bell.
#worldsfastestshingler #roofing #dormer
I roof all day everyday... and the last thing you’d think I’d want to do it watch your videos while on the couch.
But here I am.. love the videos!
Haha what else is there to do? Shittt we love for this stuff
My fault its a 9 12 pitch guage on phone
It's a sickness... I'm 62 and have a spinal cord injury.. can't roof anymore makes me sad..
Same here been roofing for 13 years now and must say these guys are good shit. We are built different and take pride in our work that's why we always think about roofs. This crew is one the only people doing it right on CZcams
3:40 “I kinda like the hitachi”
I knew you’d come to your senses 😄
lol still prefer the bostich
Good job Zach,love to see ya back!!!!Good shit bud🤘🏻💪🏼
yes sir thanks
Nice work
How do I shingle where the two planes meet at the ridge? There won’t be a vent installed. I just kept shingling both planes until they met. Thanks
Not sure exactly what you mean
@@NWIVeteranConstruction when your doing one half of the roof and Boycub is doing the other side, and you’re both shingling from the eave to the ridge….how is the “point” where you meet Boycub supposed to look? I finally finished the rental house and now the top point (where two opposing planes meet) looks like overlapped granule portion of the shingle. I used GAF NS charcoal color and the exposed part of the shingle spans the ridge. Do I just conceal it with charcoal ridge cap shingles? Thanks
Sweet u have a feeder I like to see that
What’s the pitch?
Nice video, and nice shingling speed for the piddley part of the roof! You use some different techniques than myself, but it seems to work well for you. I'll have to consider the kicker shingle, as I usually spend a lot of time popping the framing nails out at the bottom of the valley so I can slide my shingle and ice/shield in 6" or so. Side tip, but this year was the first year I got an Equipter, and it is absolutely the best investment ever! Nevermind that It's equivalent in labor saving to a full time labourer, but it's worth it for the advertising alone! With a heloc my financing comes to $116 CDN a month! There is a reason nobody who owns one complains about it.
Those palm nailers come in handy
they sure do
I just finished doing a setup just like this one, and my little palm nailer saved the day.
Hey brother! Roofer in training here in Louisville. Love watching your videos, your process is completely different from what we do here but I enjoy your work. Keep the videos coming!
You must roof the right way then hahaha. This guys process is backwards and upside-down.....
Where are you located
That lazy guys brings a bed on the roof lol. Aka couch cushions. He better have joints rolled sitting around like that lol.
What do you pay per square for your boys zach?
Why you nailin so hi!!! That shit gunna leak yo!
That's a joke obviously. I see you work with a shingle handler too 😂
what pitch is that roof
Its a 6. Reads 6.5 and 7 in some places
Pass the shingles to my hand. I can pick them up off the roof by myself. Lol maybe I'm just a dick.
Inexperienced at it's best, guarantee my 4 million it leaked
Nice video. The boycub face with do you even shangle would make you some extra cash as a tshirt
My Mrs cousins man fell off a roof yesterday working he fractures his spine broke his ribs his eye socket and had a bleed to the brain along with a fractured skull hes in a medically induced coma for 9 days don't think he will ever be the same again .. because he never wore any safety gear whilst on roof take it from me dude its all fun and games till it happens to you he has a 1 year old son
How many times have you fallen off a roof? 3-5? 5-10? 10+?
1 time i fell But landed on my feet. Another time I jumped because I knew I was gonna go off. Also landed on my feet that was only about 8 ft so I didn't really care if I fell. I was working on granules on plywood n a bee tried to sting my junk. Wasn't careful. Other 3 falls were ladder related. You have no control falling off those things so that sucks. I Landed on my back/ elbow once from 9 ft
Veteran Construction ain’t that something. I heard my dad telling stories about roofers teaching greenhorns how to “properly fall off a roof.” Maybe this could be a video idea.
I’ve been lucky to only have fallen off a roof once. I was doing gutter cleanings in the fall. Lost traction on a wet spot and landed on a backpack blower. Thankfully, the customer was an attorney so he’s helping me sue.
Lol.
You need to man up and have the fastest hand banger roofing competition
It’d be cool. Nothing but respect. Love the videos
haha well, i don't think there's many left. n i know i'd get whipped
@@NWIVeteranConstruction you
I’d give you half the money for a nail gun give away. It’d be a good contest
Break out the head-lamps! Lol.
Is boy cub back? Is it just me or does your vods seem like a quentin tarantino movie?
haha yes he's back
Sometimes I feel like boy cubs a stoner. Just straight vibin lol.
Zach: Shingle
Boy cub: that cloud is talking to me
😂😂
Boy cub is back on it ! Dope ! You guys are a cool crew.
lol thanks man
The gang is back together. You can tell he knows how you like things now. Probably best that he left for awhile, got some confidence, and also realized the grass isnt always greener.
6:55 a better way to do that is no flashing there just take some soffit off and make sure your shingle is pushed all the way back and run it up to your dormer, then do your valley.
Enjoy picking up tips n tricks! Cheers!!
Glad you like them!
Erie metal roofs $35 to 50 Thousand dollars a roof
For that price you do a good shingle roof with all ice and water then the next week you put on a regular old ribbed steel roof no leaks as long as your breathing and the roof has not been hit by a tornado.and still have 30 grand left for a new truck
Do you ever use mastic (black roof tar) ? Or how do you seal anything??
it all seals itself. no need in my area
Can you explain why you did the valley here the same way boy cub was doing it on his return video (and you tore of and did the opposite)? Is it because the dormer roof is the same pitch as the main roof? Did you do the other side of this dormer the same way or did the dormer shingles extend first onto the main roof? So confused right now 🤔
So, most valleys are done this way... where that valley line goes above the ridge... because you want to run your lower slope first. The one with boycub was weird because there was a pitch change. The reverse gable peak was steeper than the pitch it died into. If you're looking to see typical valleys, you can see 2 more on my page. One is it's own video, and the other is in the 2 hour long video, there's a time stamp on the description or Comment section
You should do a video about your tattoos and time in the army :)
nahhhhhh lol
@@NWIVeteranConstruction Whyyyyyy lol
@@yewarrhorez idk lmao I drew the one in Afghanistan and said if I make it out alive I'm getting it. The other someone else drew after I picked everything out. Got the first piece done 7 hours straight
@@NWIVeteranConstruction One is on your arm and one is on your chest right? I haven't gotten a clear look at either. See this is why I wanted you to do a video and then I can hear about your bravery in Afghanistan :)
Man faster than me I get my tape out measure each end cut then square the line up with scissors then cut it lol (2 minutes later) I can’t do carpentry anymore my back is so bad!
haha right on man. hook blades work wonders
No cigarettes' for the Boy Cub?.....yes sir!
I'm glad to see another use a shingle as a straight edge to cut your gable. Looks nice and clean man! Probably faster without a tosser though. And much respect but do you not use step flashing ? Take care man
i used it in there and thanks
Should be cutting as you nail waste of time and shingles
i see the sun dropped oh damn
it went fast lol
Can you do a video of how to do roof penetrations, such as pipes, turbans, and vents? I know how to do them, I just would like some tips to be more efficient. I love your videos by the way, I've learned a lot from you and I've made a lot of progress in a very short amount of time, so thank you for your effort
i've got 2 videos involving vents and i have a 2 hour video with pipes and furnace stacks. i believe i put the time stamps in the 2 hour one to help you guys navigate
in the description or a pinned comment
@@NWIVeteranConstruction Thank you very much, I appreciate it
Why u using a hitachi? Love the vids
picked it up and it felt nice lol figured i'd change it up a little
Nails in the middle of a valley?
never. camera angles are deceiving
Man let ur gun nail them not you 😂
Ur hitting so hard like a 🔨
So... this is the month. Is the roofing Olympics postponed or canceled?
i was figuring we wouldn't do it coz the rona and elections lol but if you n your boss are down i'll put it together. i'll just need a few more. wouldn't mind doing a small one the first year and get bigger after that
Why not put 2-3 bundles on that dormer and feed from the top would be a lot easier for both feeder and shingled
he went up there for a little bit. he did oooookayy
Shoots a hole in the felt to get palm nails lol
Also your help is lousy man I feel for ya
Had a guy here in maine knock out two good sized rooves on my property in a day by himself. About 1300-1400 square feet
Show him my videos I'd love to see some of his work
Does nobody use the gun to make sure your lines are straight?
Not the 3 tab Guage thing. I actually just took that off the Hitachi
4 square materials supplyed what do u charge
Depends on pitch n all that. If it's gonna take more than half a day I Gatta charge 7-800 for a day's work
40% 10.85. Run is 26ft.but minus 6 ft for the flat.deck 74 inches. True 2 inch main beam.its not a traditional hip got that flat at the top chimney in middle common rafter i believe is 11 ft make one intresting video
8 minutes a square so what do you do after the 32 minutes?😁
@@5050johnsmith lmao i was talking tear off n such
Pitch is?? 6/12-8/12?
its a 6
At 1:45 look look down 2 feet to your left! Sticks out like a sore thumb!
I don't see what you're talking about
What happened to your bostitch
eh, shot a few with the hitachi and it felt nice, so changed it up a little
Hey Zach how are you
doin fine how bout yourself
@@NWIVeteranConstruction im good
youre a savage like me on a roof, i learned alot of tricks from you. how can you stand working so hard while ur guys just hang around, you would easily profit 200k in a year if you went solo. no bullshit
lol i probably come close to making that with them. i could make 500k easy if i just subbed it out for 90 a sq on walkers. i'd rather show people because i'm thankful someone showed me.
Im in southwest michigan, when i do sub work for a bigger company i get 160 per square, stripped and shingled, they provide material. 1 layer. Does this sound like your area too?
Your not making 160 a sq for 1 layer walkie.. not subbed at least
Well thats a good sign then because i didnt know if it was high or low, guess i will be happy then!
@@jacob5525 shit last year I had guys getting to pay me 60. Another 80 and the most ever was 100. That's why I don't sub. No money to be made
Interesting that hidden shingle u use to start the valley..never seen that done before.i might steal this from you. I like it better then cutting my shingle and wrapping it up then I run a tin in the valley. Really good idea u have
thanks. wish he showed how it looked from the bottom. it sticks down quite a bit. not too much. but its visible for sure and helps divert the water
You looking for a worker just graduated have ged in construction
Where you live bro I'm in nw Indiana
Too much of a rush job, yet too slow in some areas. Try to get smoother and you got it. Get your hander to think ahead or get him shingling another slope.
fashooo
Gotta watch out for those meat gazers. 😂
straight up
Getting dark at 5:30 now sucks huh?
Yes absolutely
Only thing missing is tweaker brad hanging over your shoulder telling his stories at a mile a second.
Glad to see the cub is out of the pen!
Has he been demoted to tosser?
He's not a tweaker he's done nothing more than we all have lol and nah boycub was shingling there just really wasn't anywhere else for him to shingle coz what was left was super tricky
Hey zack, can you make a video on how to make course line up together when coming from 2 different parts of a roof
yes sir. remember the part of the video where i said something about the lines i'm following? i'm already making one. just posted this because its more fun and was an easy edit. that ones for sunday
Any Home owners watching this, this not the right way too shingle a dormer
why you subbed if you're always talking shit lol
@@NWIVeteranConstruction what lol I'm 31 years old roofing since I was 14, owned my own buissness since 20 in canada, I've never sub or sub out, just remember if you sub for work you still are making someone else rich, just like working by the hour, the best quote for like is be a follower or be a leader, I'd rather be a leader it is what I do and put food on peoples tables that follow me
I said subbed to my channel. Always got something to say. What's wrong worry it since you didn't bother mentioning. And don't say it's coz you do it different lmao
I am not subbed, and sorry for the late reply im working on a roof like I do every day 7 days a week haha
Did you ever do the estimate for all the bird houses? 🐦
For those lazy guys just hanging out without nothing to do.
He looks tired 😓 help him instead watching 😡
Love your videos bro, but we all know your not the fastest. Its ok to be among the best.
haha some day soon we will see! I'd like to think I'm top 5 to ever do it but I'm definitely not as motivated as I have been in the past. there was a time a few years ago I'd bet everything I own that nobody couldn't beat me on a 20 sq. side gable to gable. but i do have a 80 sq job coming up and i would like to shingle the gravy side by myself. i assume its around 25 sq. i know i'd finish it but the problem is its at least a 7 pitch
@@NWIVeteranConstruction lol I was just giving you some shit. You knock shit out man, I roof all day and then most days watch whatever new content you have out. I actually started cutting my racks the way you do, normally we bump the step out over the rake and cut it off, but I have to say your way is faster and easier.
@@tonybowen472 that's awesome bro I couldn't not try either the first time I saw it. Those nice big steps make it easier to shingle right?
That is the worst shingle thrower I’ve ever seen
lmfao he doesn't toss very often. definitely could've made me look a little better
you've lost a lot of weight what gives man cub?
thanks
Dude your slider is horrible
You got boy cup throwing shingles all that does is slow you down ,i don't like that when my workers do that i just tell them go do something more productive. Doesn't mean I don't like your videos always watch them
haha i don't ever use a tosser. usually i have them hand me a few shingles or set them up but it worked out nicely
How does your back not lock up on you? Makes me hurt just watching you bending over nailing
A lot of stretching lol
Posting videos with no fall protection, no eye protection while using pneumatic tools...I’m sure OSHA will forgive you
No eye protection lol I can tell you’ve never been in the roofing industry
@@kingpuff2272 I actually am and I’m very aware of OSHA requirements
teach your guys, you shouldn't be in the field
His employees probably know how to do it. There isn't a problem with bosses working, I'd rather work for someone who's actually working with me rather than me doing all the work and him getting 90% of the paycheck. Especially for a smaller business
It looks to me like he is teaching them. Also probably enjoys being on the job.
Why?
Like whats wrong with him being in the field
I don't mind being here really.. my guys know what they're doing but we have a schedule to up keep and now i've got to film videos as well. so even if i was to get off the job completely and stay on the business side i would have to come back for videos lol i'm doomed to the roof. time for me to accept it