Scooter Fault Finding Not charging and trans-axle removal on a Rascal Vision
Vložit
- čas přidán 23. 11. 2020
- Identifying why the charger is not charging the scooter also has a very noisy trans axle while driving.
www.nithsdale-wheelchairs.com/
Contact E-mail is nithsdale.wheelchairs@btinternet.com - Auta a dopravní prostředky
My friend managed to repair the shattered transaxle so we attempting putting it on today-Hoping all's well for you cheers for the help a few years back.
They did a bad repair at the time and that's why it collapsed initially
Ah of course! Keep one of the wheels on will help!
What do you guess on time-Im guessing the switch will take 10 minutes haha we likely on it for 6 months. We need the knowledge you have...👍
UPDATE-ITS FIXED!!! Also running smooth-Even though it's a 500watt motor RPM decent still only running a smooth solid 7.8mph I can see I have an electrical fault so will now get it fully rewired and clean all boards etc like you also do...Thanks again for previous help...
Thank you sir for another helpful Video 👨🦼👍 : )
Please keep them coming as they help us novices get to grips with the ins and outs of these machines 👍👩🦼 : )
The rubber seal on the casing is pretty badly damaged on ours but hopefully I've a spare from my other.
Respect to you brilliant man.
Thanks for your brilliant videos and I'm sure you should be wearing a cape with a big "S" on the front! (SuperMan) !
Great video
I am using a mobility scooter transaxle and motor for a different application, do you know if I could easily lock the rear differential as I’m going over wet muddy ground. Thanks, I’ve learned a lot from your videos 😎🤓
Hi sadly I have never attempted the lock it for health and safety reasons. You would have to dismantle the axle and weld part of the gears sadly as I say I have never attempted it so you will need to hunt around to see what’s to weld or remove not really sure you may want to ask around sorry
My TGA BREEZE S3 isn't fully charging, I've had it on charge but it's not fully charging, it's only on half a charge. There is only 2 of the 4 charging light's on the scooter that light's up and that's it. Basically i want to know why it's not fully charging, only showing half a charge. i've put it on charge quite a few time's now and not once has it fully charged my tga breeze s3 scooter. The scooter work's OK as in it run's and moves but it just won't fully charge. Help
Hello my name is John Paul I am from Ireland
And I have cerebral palsy but it was crutches to get around
I have recently finished up working
In my previous job which was supermarket
I just wondering where did you learn all about how to fix chairs and mobility scooters
Would really like to learn
I know you are in Scotland but I just wondered if there is a course and if so could you tell me the name maybe I can find it in Ireland
I have subscribed to your channel because I sofa very badly with dyslexic
And I'm a visual learner anyway sorry for this long text and if there is any spelling mistakes sorry I speak on my text thank you coined regards Irish JP
Thank you. I bet that 2nd wheel was a right pain to shift.
yes indeed it was just as well the trans axle was done. mind you i have the cut up wheels before that where seized on as i would of damaged the axle on removal
For your info that is a Rascal Ventura ,I have got one !!! I have a weird problem with mine, the pavements arou8nd where I live are very rough as a result the red freewheel lever keeps jumping out of fixed wheel and into freewheel .I have tightened up the screw that holds the lever in place but it still undoes Should I remove it completely and clean it up and use some Threadloc on it ot is there another way ? ?
Hi never heard that happening. Is there an issue wae something pushing the lever into manual when it hits a pump. Check that
@@tomjacques4 Hi thanks for coming back to me ,I have checked there is nothing that can hit it the Alun screw that holds the handle in place is just coming loose and because of very rough pavements it just jumps into freewheel . I once used cable ties to hold the handle in the motor mode which worked until I needed to move the scooter in freewheel mode!!!I was thinking of taking out the screw completely washing it thoroughly and then coating it in Threadloc seeing if that works Told you it was a weird one !!
@@michaelratcliffe5493 SOMETHING WRONG I HAVE THIS SCOOTER AND IT never goes into freewhell in fact u have to pull lever HARD to do that. your maybe faulty
not a rascal vision!! thats a rascal VENTURA same as mine. now i did comment about my wobbly tiller this is the scooter i am on about.
Well spotted
Check the location holes on the gas Stroud that adjusts tiller could be worn or slack
@@tomjacques4 im sorry i dont understand what u mean. what is the gas stroud?
@@tomjacques4 if u mean gas strut as they call it - it has alum key screws and i tighten them all seems wobble is lower down? was wondering about the bearings in the tiller bottom???
@@tomjacques4 i think if you look at 4:56 you see the black rubber boot i think my wobble is coming from under that boot, do you think i need new bearings?? i have tightened down that big massive nut thats there but it still wobbles.
I may have put the transaxle the wrong way round is that possible?
Everything’s possible , do you mean fitting it to the frame ?
@@tomjacques4 Yes onto the frame I think I've put it on backwards. I will strip it down today and alter.
I have one of theses the spanner flashes 7 times and wont move could you help please
Sorry for the late reply but what’s the make and model please
It's a rascal ventura
@@simonbeech41 check speed pot / throttle pot and wiring of said
Do you have a electronic brake for a tga breeze s3 scooter ? Cheap as possible please as I'm on ESA. Many thank's
Nothings cheap with TGA I will need the serial number of the scooter please
@Nithsdale Wheelchairs V where is the serial number on a tga please ?. And what is the answer to my other question please ?.
@@kevzee there are different brakes available that’s why I need the serial number which should be located on the tiller in front of your knees
@@tomjacques4 there isn't ONE
@@kevzee hi will need a picture then
could you not just replace the berings
these are non serviceable units and when the bearings are gone as much as that they cause damage to the drive shaft which is not available as a spare part in the UK only the complete Axle,