New Exhaust Tips! | BMW F30 install
Vložit
- čas přidán 1. 11. 2019
- Installing new Carbon Fiber Exhaust Tips on the F30!
These were purchased from AliExpres. They are stainless steel and real 2x2 weave carbon fiber
Dimensions: 70mm inlet, 92mm outlet, 120mm long
Link:
www.aliexpress.com/item/10050...
Don't forget to follow on IG!
@thompsac_m3
#AcceleratedMotion
Click that subscribe button!
Thanks for watching!
Don't forget to subscribe!
#AcceleratedMotion
Follow me on IG!
@thompsac_m3
Follow me on TikTok:
@thompsac_m3
Looking for discounts on parts?
DM me on Instagram @thompsac_m3 for discount codes from my sponsors!
SPONSORS:
BPM Sport Tuning: coding, tuning, retrofits @bpmsport www.bpmsport.com/
Unique Style Racing: aftermarket automotive lighting @usrauto www.uniquestyleracings.com/ind...
The Rag Company: premium microfiber @theragcompany www.theragcompany.com/
Safety Restore: seatbelt modifications @safetyrestore www.safetyrestore.com/
Motorsport Hardware: race hardware & wheel studs @motorsporthardware motorsporthardware.com/
BlackboxMyCar: dashcams @blackboxmycar www.blackboxmycar.com/?aff=43
Gates Innovations: carbon fiber aero parts @gatesinnovations gatesinnovations.com/
Venoxy Gauge Faces: customized gauge faces @venoxycom venoxy.com/en/
BavSound: premium plug n play sound system solutions for BMW & MINI @bavsound www.bavsound.com/
DETAILING/GARAGE PRODUCTS:
SwissTrax (ribtrax): bit.ly/3fy44Ud
Obsessed Garage Custom Install Kranzle Pressure Washing Solution: bit.ly/2xRj5zy
Kranzle K1622 Pressure Washer: bit.ly/2zpYa6N
Kranzle K1322TS Pressure Washer: bit.ly/2LgMEgI
MTM gun & wand: bit.ly/3bj7AOV
MTM Hydro PF22.2 Foam Cannon: bit.ly/2YTo8dA
Cox Hand Crank Hose Reel: bit.ly/3bdB7tr
KobraJet 3/8” Pressure Washer Hose: bit.ly/2yy11Lc
Stainless Steel Shelving: bit.ly/2Whvx56
CarPro Reset Car Shampoo: amzn.to/2DeEO3x
CarPro Reload: amzn.to/2XKffAC
CarPro Eraser: bit.ly/2YNCxIA
CarPro Perl: bit.ly/2zmSNW6
CarPro IronX: amzn.to/2pP2o3z
Adam’s Car Shampoo: bit.ly/2WhB7nQ
Adam’s Tire & Rubber Cleaner: bit.ly/2WIqjhF
Adam’s Wheel Cleaner: bit.ly/2zkMWRa
Adam’s Dressing Applicator 6 pack: bit.ly/2WkDsP7
Chemical Guys Honeydew Snoafoam: amzn.to/35ygXYr
Obsessed Garage Decon Soap: bit.ly/2YNDd0k
Optimum Car Wash Soap: amzn.to/2QWt7Xj
Optimum No Rinse: bit.ly/2L9tF82
Optimum Ferrex: bit.ly/2YKmaMM
Obsessed Garage Carwashing Package: bit.ly/2WhvSVq
Meguiar’s Hyper Dressing: bit.ly/3cfHgqk
GTechniq C5 Wheel Armor ceramic coating: amzn.to/2XLCUk2
CQuarz DLux wheel & trim coat: amzn.to/2XPNg2G
IK Foam PRO 2 Pump Sprayer: amzn.to/37zZ90Y
MasterBlaster SideKick: amzn.to/2QMRuGJ
The Rag Company Starter Microfiber Kit: bit.ly/2zm8IEg
The Rag Company Eagle Edgeless: amzn.to/2OkLcfM
The Rag Company Cyclone Wash Mitt: amzn.to/2QRKjNo
The Rag Company Window Towel: amzn.to/33oZjFn
P&S Starter Bundle: bit.ly/3cfHe1G
P&S BeadMaker: bit.ly/2yFyi78
Detail Factory Detailing Brush: amzn.to/2XMQuUg
EZ Detail Brush: bit.ly/2yxe9jL
Microfiber Madness Incredi-brush: bit.ly/2AdAVxt
Lambskin Wheel Mitt: bit.ly/2SPe4i7
Tuf Shine Tire Cleaning Brush: bit.ly/3bhNnsA
P&S Brake Buster: bit.ly/2zkNBlC
Hyde’s Serum Rustopper Rust Inhibitor: bit.ly/2SP74Sg
Obsessed Garage Wheel and Tire Cleaning Package: bit.ly/2Lfz8u1
GritGuards: bit.ly/2YLZz2n
Stoner’s Invisible Glass: bit.ly/2WDpyGB
Lexol Leather Conditioner & Cleaner: amzn.to/2QQAHCL
Microfiber Restore: bit.ly/35KN0Gb
Rupes LHR15 Mark III 5”: bit.ly/35JXrcN
GEAR:
Sony A6300 mirrorless camera: amzn.to/2QQA2AY
QIBOX Glass Screen Protector: amzn.to/35vZVu6
RAVPower Camera Batteries Charger Set for Sony: amzn.to/35vZBLU
Rode VideoMicro Compact On-Camera Microphone Shock Mount: amzn.to/35zGyjW
Zhiyun Crane V2 Handheld Gimbal Stabilizer: amzn.to/2KSwnih
Manfrotto Rapid Connect Quick Release Plate: amzn.to/35Ai5Lj
SanDisk Ultra 64GB SC Card: amzn.to/34iUBtL
Sabrent 4-Port USB 2.0 Hub with Individual LED lit Power Switches: amzn.to/2KT97RA - Auta a dopravní prostředky
Looks amazing man!
Tyler Barker thank you! I like them a lot!
Looks really awesome! ❤
Fabius Maximus Cunctator thank you!
@@accelerated_motion do the power seats and comfort access come as standard in the US? In Europe there are barely any F30s with that.
Fabius Maximus Cunctator I believe it’s an option! Not all of them come with comfort access, but it’s highly desirable option. Power seats are standard I believe.
As a fellow Bimmer owner, I just got the shiny carbon fiber look ones as well, but the Sparkovic ones, I looked up the stock exhast pipe size, these tips are huge, but look great, I'm going to have to make some kinda spacer..but quality job.
My car has an M Performance exhaust so the stock tips might be bigger than a regular stock exhaust.
Those new tips are sick!
thanks homie
3mm hex 👍🏼🙏🏼
I've tried to get dual exhaust tips. The rear diffuser I've installed has the openings for dual. I cant seem to find any for my M340i that fit on properly without having to cut the exhaust itself and possibly mess up the emissions and make the check engine light come on. Any recommendations? 😫
Your exhaust tips should bang off with a hammer, as mine did in my video. The tips I have slipped right over the existing piping under the stock tips. No cutting required, no emissions or check engine light issues. I assume it would be the same for your 340.
Hey sir, I also have a BMW 440i I am also looking at buying the bmw carbon fiber tips. One of the factors I’m considering buying them is the sound quality. I have herd that it does make the exhaust sound better with more pops are growl. Just curious from an actual customer your thoughts of the sound difference.
I actually feel like the exhaust note got a little quieter after installing these tips. The burbling and pops come from the tune that you have.
Hi! look great! the sounds from exausts sound different with the tips? Which diameter I need? I have serie 1 116d
I will say, by adding the tips, it muffled the sound a tiny bit more, but nothing super noticeable. You'll want to measure your stock tip diameter and decide what size to order.
Hi bro, what the name od those rear lights? They loook great
Those are blackline taillights from Unique Style Racing. Check out my other videos. I did a full DIY install on the taillights. Theres also a discount code available if you want to purchase at set!
The tips look resonated (the holes inside) Have the tips affected the sound at all?
Chris Derman correct. It did make the exhaust a tad quieter. Barely noticeable. I also feel like the tone dropped a little lower too. But again, very minimal change.
Thnx
No problem
Hey would you put these on a 320i?, also is that veichle completely stock and the tips have just been added?
Exhaust is stock M Performance. I'm not sure if they would fit a 320 - you'll want to measure your stock tip dimensions and see if these will work.
Would you recommend these tips for my M2? How's the condition of the tips after 4 Months?
TLGKRL I love them still! My only complaint is the long bolt on the clamp looks like it’s starting to rust a little. But I can easily pick up a replacement at the hardware store. But the Carbon tips looks great otherwise! I recommend them if the diameter is the same for your m2!
Thanks for your reply! :)
Hello Adam, I want to install these tips for my F30 2014, but it only has one pipe. Is it possible to install a fake tip on the right side?
That would require a lot more work. If going through all of the hassle to add another exhaust tip, you might as well do a custom exhaust and make both tips functional.
Can u change a single exhaust to a dual exit on both ends?
I have seen guys with 328's do a dual exhaust tip conversion. I assume the muffler will be in the way, so if you did a muffler delete and have some custom exhaust work done, its certainly quite possible to do.
Can i put this in my 2015 bmw435i gran coupe?? Thank you for answer
KN NK if you have an M Performance exhaust, then you’ll be able to use the tips in my video, as they are the diameter that you need.
Big help i backed my car into a curb and the left tip is now uneven to the right one, i thought i can unbolt the 10mm but too small of a hole to fit a10mm i didnt know there is a pin i can remove with ale key and adjust it
Nice
Where did you get your rear diffuser and trunk spoiler from? I’m in the market and want to make sure I’m getting quality. I’ve got the same car.
Rear diffuser is from JHP Dynamics. Trunk spoiler is from Gates Innovations. I did install videos for both of those on my channel as well. I also have a discount code for Gates Innovations so go check out that video!
Accelerated Motion reached out to JHP and they said they are closed. Are you able to provide the discount code off of IG as I’m not on IG?
@@nicholaswilbur2113 Yeah JHP is no longer in business but they have a partner company who is now operating. I dont know who that is though. Are you subscribed to my channel? If not, please subscribe and go check out my GATES INNOVATIONS spoiler video. Discount code is there.
Accelerated Motion I am subscribed. I’ll see if I can find the code
nicholas wilbur “acceleratedmotion” get you 10% off on Gates Innovations website👍🏻
Hi, I have an F82 M4. Do you think yours would fit my F82?
I think the diameter is different for the M4. I would measure your stock ones and go from there.
Hey bro I found some that are 101mm, so 4 inches. Would that fit with the m performance diffuser? Or would i not be able to fit it?
With the stock M Performance Diffuser? I would measure the cutout for the diffuser. I know with my aftermarket carbon fiber diffuser, I can easily fit a 4inch tip but I'm not entirely sure about the stock one. Might be tight fit and you dont want to rub and risk burning it.
@@accelerated_motion it would actually be from AAConcepts, I’m going carbon with brake light. Not feeling stock matte black😂
Hey where did you get that flooring from?
Silas Mason theyre SwissTrax. Check out their website👍🏻
How come your inlet doesn't have the top nub like other f30s?
Not sure what you mean by top nub...
I'm not sure if I need 60mm or 70mm. I have a 2016 435i, what do you think? Do I have to take the stock tips off to measure? Thanks!
Just to be safe, I would take your stock tips off and measure. But I would shoot to be larger than smaller.
@@accelerated_motion just checked, mine is not flanged like yours (Ie. 10:24 in your video) It's just 60mm all the way. Look forward to getting them in! Have you noticed much corrosion on them? (Ie. the bolt/mounting hardware or the tip itself)
@@seb42 the bolt has a little rust but everything else has held up very nicely. I figure I can easily swap the bolt if it gets too bad
Would these fit the standard exhaust as well or
Is the inlet size different?
Standard non-M sport 335 tips are 60mm I think. So as long as you buy a set that are larger and adjustable, you should be ok. Just to be sure, I would measure what your current tips are. Keep in mind that the pipe underneath the tip is actually a smaller diameter. You could bang one of your tips off and measure the pipe underneath. Wouldnt take long to do and it can be put back on. Thats what I would recommend doing.
Accelerated Motion that makes sense! Thanks man will try that
Nice video! The bmw prices are rediculous... could you give me advice? My pipe diameter of mij bmw 135i with the tips off 60mm what size of tip (the same as u) should i buy? 60mm or 63mm. Thankyou in advance!
Brulpijpfanaat thanks! I appreciate the support! For your situation, I would go with 63mm. As long as it’s somewhat adjustable like mine, you’ll be able to tighten it down enough to keep it from moving. I fear that if you go with 60mm, it won’t slide over your existing pipe.
Accelerated Motion Thankyou very much for your response! Another question. What about carbon build up on the metal? Is it easy to remove?
can u send me link to it? the link in bio doesnt work, and also i looked up tips on aliexpress and it says m on body so maybe theyll be on the actual tip with thr m logo?
I updated the link in the video description. Legally, they cannot show pictures with the M logo, but it is in fact on the tip.
@@accelerated_motion how long did it take to come bro?
@@B58mur maybe a month. This was pre-COVID
Have these changed anything on the sound of the exhaust?
Since it does have some baffling, I think the tone got a tiny tiny bit quieter, but not by much.
What wheels do you have on your m3?
On my M3 or my 335? F30 335 has OEM 437m wheels.
What is the size of the car’s exhaust pipe?
Dimensions are in the video description.
Would these fit on a 2006 330xi?
Not sure. I doubt it. You'll want to measure your stock tips and go from there.
Brother
Stripped the screw on one of the tips. Now it is me who is SCREWED 😭
Yikes.
@@accelerated_motion finally managed to get it out after hours and hours of using a screw extractor set and drilling. Was not fun but I finally made it :D
Thanks for the video btw, this very simple install turned out to be a lot more complicated because of my screw up
@@DominicBrissette I am glad you were able to get it resolved!
My set screw is rusted. And immediately rounded off
Sorry to hear that. Fortunately, thats an easy fix.
What is the fix?@@accelerated_motion
How do I clean these tips?
Stainless steel polish for the hard to get off dirt. Otherwise, wheel cleaner works well for regular maintenance washing.
@@accelerated_motion Thank you !
to smal, 101 or 105 mm better
In my opinion, I think it was the right size. Anything bigger would look out of place and too aftermarket for my liking.
Hi broo Instagram
O need your help do you have Instagram
Yes I do. @thompsac_M3 on IG
How you putting m parts on a base bmw lol
The car is covered in OEM BMW M Performance parts. So this is not anything out of the ordinary. The steering wheel, door sills, interior trim, etc. all have M Performance badging.
@@accelerated_motion ya ok so don't have to add more m parts leave it stock license plate frame doesn't have to a m badge on it lol 🐷 this is coming from an e92 m3 owner
@@mlif3813 lol ok guy. Stock exhaust tips also had the M on it too. So I did nothing different but add carbon. And it’s a license plate frame, who cares. Stop comparing this to adding M3 badges on the car, when the car came this way from factory.✌🏻
@@accelerated_motion exactly guy just stop adding anything else to a stock bimmer lol guy
@@mlif3813 go troll somewhere else dude
Can i put this in my 2015 bmw435i gran coupe?? Thank you for answer
You should be able to, yes! Keep in mind that my car came with an M Performance Exhaust. So my stock tips might be a little bigger than yours if you have a regular stock exhaust.