Fiat 1.3 Multijet Diesel Engine Oil Change
Vložit
- čas přidán 26. 08. 2024
- Open this Box for more info and useful links
How to service your, Fiat 1.3 Multijet Diesel Engine.
How to Change the Oil and Oil filter, their are two oil filters depending on the engine you have fitted, the car shown is a fiat punto but the process is the same for all cars which use the 1.3 multijet diesel engine
If you found this useful why not go ahead and buy me a coffee www.buymeacoff...
High quality engine oil amzn.to/2zoFhBJ
Low quality engine oil amzn.to/2ZypQ4y
Engine Oil Filter amzn.to/2TxAqoS beware there are two types make sure you know which you have.
Tools
27mm Socket to open the oil filter housing amzn.to/3cZ8PEu
12mm Hex key to remove sump Plug amzn.to/2Xk2a18
Watch this Video through our Website with all useful links available right at your fingertips goo.gl/LWkwdS
Check out our Facebook page and join our community / puntohowto
Thank you for saving me from overpriced servicing by posting this.
Diesel engines have a lot of soot particulates build up over time which stains the oil, so yes new oil will turn immediately black, especially if the car has done a few miles
hi which size elen key use for fiet siena draining oil?
You're doing God's work sir! You saved me so much money with your videos. Keep up the good work!
Well done 🥇, the fiat engine Is very wonderful 🔝
this is arguably the best engine fiat have ever made, what lets them down is the big chunk of metal around the engine, and the 1.2 petrol versions which have a lot of issues with head gaskets and electrical gremlins
just bought a 2nd hand 2007 1.3 diesel doblo privately, engine management light came on half an hour after picking up the van, there is not much power while driving,,2 mechanics said it was the fuel injector,so got a fuel injector fitted,drove out the garage and 5 mins later management light came back on,its just the same,nightmare engine im thinking,more money needed to try and fix the problem.what can it be???
@@marky26marky timing chain
@@martin1649 four years on, stil got doblo, it's going great even tho management light is on and off
Schön gemacht.
Habe den Multijet im FIORINO verbaut.
Hat mir geholfen--was wären wir ohne CZcams?
Danke und Gruß aus
Germany
Eddi
excellent video.. thank you 😊 did my 100 000 km service today 🤙 just need to reset the oil change warning on the heads up display .
Well done you can use a registered version of the MultiECUScan software to reset service lights
I believe it protects the plastic housing and prevents it coming apart in normal use so it might be a good idea to replace it, to start i would ask at your fiat dealer for a price as i suspect it wouldn't cost a great deal to replace
Fantastic. I have a Lancia Musa in Portugal with the same engine. This video has a simple but accurate maintenance procedure. Cheers.
Thanks for letting me know, they stopped selling Lancias in the uk many many years ago
I believe it does state in the video, but its a 12mm 'hex' key most sets only go up to 10mm so you'll usually have to buy it separately
Really appreciated for the efforts taken to show the oil and filter replacement. I got a palio 1.2 ELX, is this the same way i need to do in my car. Suggestions are much much appreciated..:-)
Best Engine.
It's always best to soak the new filter in oil first, before putting it in the housing. This ensures that oil will be at the main parts of the engine when starting after an oil change. If the oil pump has to pump oil into the filter housing first, before getting to the main parts, then there's a chance the main and small end bearings could be running dry, which over time will make the engine knock. This then would not be a good scenario.
Let’s think about this logically… in order for the oil that you have soaked into the filter to be pushed around the engine, it needs something to push the oil out of the filter, as the oil pump is not an air pump and air in the system will be easily displaced the oil in the filter is reliant on oil pressure, so it’s not going to move that oil that you have soaked the filter in, until the oil pressure is up and moving around the system. Also, if you say the oil pressure takes a second or two, to build up and the car does that once a year for its annual oil change then it is only maybe 10-20 seconds over 10 years that the car is without oil, as there is always oil left on parts from the previous running, it is simply not worth my time or hassle messing about soaking filters in oil, getting oil everywhere and making even more of a mess just for the sake of 10 seconds in 10 years (when I won’t own the car anywhere near as long as that)
checking out oil level on a engine that hasnt run? at psa we always check after the engine has ran. So the filter and such fills with oil first
This is one of the oldest videos on the channel there is an updated version and I did cover this on the update, this video was left up because some people requested it and it had such a huge amount of people linking to it they all kicked off when I took the video down after the update which is why it’s still here, I believe there are links to the updated video in the older video but it’s here czcams.com/video/BLjEjSgU3u0/video.html if you’ve not seen it
in addition you probably carry a bit more weight in your little van than i do in my punto, still a great little engine, hope the video has helped you save a bit of cash
This is a very hard to tackle job on the Fiat 1.3 multijet engine because of the strange mounting and difficult access to the EGR valve, however we're looking at ways and products to help do this and hope to put it into a video very soon
hi good video but what about warning light?
Hi John, i've never owned a car with a rusty sump issue before seems to be a fiat issue, older mk2 puntos are beginning to suffer from bad under body rust issues so to preserve your car a covering of waxoyl or dinitrol would help keep it healthy for years to come
Thank you for posting a great tutorial. I was clueless as to where I could find the filter element!
Hi there, you shouldn't get any warning lights when doing a straight forward oil change. If you have a problem with the service reminder on the multifunction display then this obviously needs to be reset as part of a service however only the very top of the range cars have this feature (the car featured doesn't have a service light) so I didn't include it in the video
Thanks for that I shall not bother then. I'd've noticed how you've tackled the rusty sump in one of your videos. Do you suggest spraying oil under the whole underbody of the car?
This engine is also used on fiorino and on Opel corsa. On fiorino, someone could have 5lt/km easily. Depends how you drive
Thank you for a very clear and concise instruction video. Most helpful. I will check out your other videos.
Thank you,
Great to hear this, thats what we set out to do with these videos!
What year is that Panda? Mine is a 58 plate and parts look different to mine, like the water/coolant tank.
@@Michael-Allen hi Michael..... it’s not a panda... it’s a Punto
@@PuntoHowto ah that explains it lol. No worries.
Hold the mileage reset button turn on ignition (just the dash lights) and hold for 1 min until its starts flashing
Thank you so much. and do 8nhave change air filter too. Please advise
There is no rule saying you have to change the air filter, but it’s always worth doing as part of a service and is very cheap to change, I have a video for air filter change as well
@@PuntoHowto please share me the link sir. And thank you for replying.
Sandeep Joshua here you are, hope it’s helpful. czcams.com/video/bf9KwtjaFDg/video.html
Aprecied for your information
Thanks for the comment
i love your video,can you show how to change 'timing chain',and how to set marks and points..
We can only do this once our timing chain is due for renewal, which could be a while yet, glad you enjoy our videos
Yes that’s great now how do you turn off the oil dash light.????
Hi Rod, the car in the video didn't have an oil service light, however if yours does (like our red punto did) you can download a program called MultiECUScan (google it) which can reset the oil light for you, you'll need a laptop and £5 cable from eBay or Amazon.
Hi John, i have never flushed the oil in my life, there are inherent risks with running what is essentially a very thin oil in your engine, as well as some deposits help keep seals nice a tight and engines running smoothly, I've known engines after a flush to need new oil scrapers and valve stem oil seals because of removing deposits, so unless its a very new car with relatively low mileage I wouldn't risk it, and even if it was a new car personally I still wouldn't bother.
PuntoHowto
Hi I'm trying to empty radiator to put antifreeze I've bee told to undo bleed screw but can't see one .fiat 1.2 8v 2001. Thanks
do you mean 5lt/100km? you can get much better economy than even that out of this fantastic little engine
we will be servicing our 1.9Multijet Diesel soon and will be sure to upload some videos relevant for you
thanks again for replay.i dont yet change oil but in first change when i take this car fiat grante punto diesel 1.3mj 2007 i saw the mechanicman to unplage near the machin something pipe and this make a bit bit noise.he change the oil and then put it in his place and stop. have you have any idea? and sorry about my english.thanks again
Would you recommend waxoyleing the underbody of the car
Really well produced video - thanks
Is there video how clean EGR ventil on 1.3 multijet?Thanks
thank you man you've got yourself a subscriber :)
Do you suggest an oil flush
i have fiat lenia diesel, there is a problm in oil in coolent box, what to do, my car is not heating , tell what to do ?
Thank you for this useful tips.
Would be great to see how to do this.
Eu quero saber como posso mudar a bomba de água de FIAT DUBLÓ DIESEL
U have saved my day
I got the same 1.3 multijet car but not the same filter in 🤔. Is it normal?
Yes, there are two different filters used, it’s not always obvious which one you will need till you take the old one out.
the only real difference would be the oil filter which on your car is most likely the older style metal canister which screws on
Thank You, Thank You, Thank You!
Great video. My recently bought doblo is missing the black metal guard that covers the oil filter. Should I be concerned?
Was it a problem?
Ola amigo! Estou com uma certa dificuldade no motor de Fiat 1.3 multijet engine... a dada altura ele dá arranque, mas no mesmo instante vai abaixo.
Hi friend!
I'm with a little problem with my Fiat 1.3 multijet engine. It start engine, but at the same time the engine shot down. if have a different way to fix this, I really need your help.
Waiting your feed back anytime. See ya
How do you reset the service indicator on dashbord?
ماهو سبب عدم دوران محرك السيارة بعد ان يعمل لمدة نصف ساعة وتصبح ضربة المرش بطيئة
thank you very much
thanks for watching, glad to have saved you some money, please subscribe or check out our other videos.
How works linea diesel oil pump
yes I meant 5lt/100km, sorry. The engine is great, its just the air dynamics of that little van. You can push it < 5lt per 100km but you have to be under ~85km per hour
...))))
I want tips for my 1.9 Deisel
can´t really figure it out if your engine got a rubber o''ring or flat aluminum washer for the main oil drain plug.
Neither.
Hi, i want to know which key you use for to open the oil box and for opening the filter what must i use? i don't have the machine for to lift the car.
To drain the oil you'll need a 12mm hex key this is specific to most fiat's so worth investing in if you plan to keep the car for a longer period. I forget the other sizes needed but if you get a good set of hex keys they will pay for themselves in no time. I could do this oil change on this car in about 10 minutes without having to jack the car up, but only because I had done it so many times I knew exactly where everything is and what was needed in what order.
hey .. my has had a oil change but the oil light has not gone off is there anyway I can re set it my self?
it depends on your specific model year etc.. I know for my multijet Doblo 2006 it needs the special handheld device to do this. This is approx £140 on-e bay eg Sealey VS8623 BUT it may be different for yours, see if a local dealer can do it for beer tokens!
Gearbox oil was only recently changed (before the videos commenced) out of interest why do you want to change it, shouldn't need doing till 100,000k miles ?
Oil underneath chassis?
Does the 90 MultiJet has any washer or ring in the sump bolt? Also, there"any major diference in using 5w30 or 5w40? Tanks.
You need to use the correct grade of oil for the engine or you can damage the engine or in the case of the 1.3 multijet, find that the timing chain fails prematurely. No idea about the sump plug on the 90
+PuntoHowto 😉
are these vans any good was thinking of buying one but heard there crap and give so much trouble
Electrics are shit, everything on the engine and under the bonnet is hard to get to, the emissions sensor plays up all the time, and it's like driving a block of flats on wheels.
good
hello, could you tell me what number of key you use to remove the plug from the crankcase?
thank you!!
12mm Allen key
Awesome video!! ;) Need to try it on mine!!! :D
Hello there do you know someone what is the triangle yellow light on what doesn’t mean
What car do you have? A triangle can me a lot of things from a blown bulb to an engine problem but it’s usually accompanied by a message when you start the car.
PuntoHowto I have punto grande 1.3 multicjet the triangle light stay just some times ,thnx for the answer 👍
How can you reset the flashing oil sign and the renew oil message after you renewed the oil and filter ?
What age and model of punto? Generally this needs to be done with software via the obd port
PuntoHowto it's an Punto Evo 1.3 JTD, november 2011.
Last time, the dealer reset the message, but is there no way to do that like: ingnition on, push reset for a minute, ignition off ??
no sadly not
Wilco de Jong look on you tube.. some fists can be reset without a handheld, some cant, screwed by a car manufacturer again! Sealey VS862 claims to do this BUT may not be correct for your car... research it more eg forums and youtube... try and identify a video with the same dash electronics display as yours
oil 3 litre API CF, or ACEA B3/B4
Hi there
I've got a fiat punto 1.3 diesel, and my intifreeze coolant is leaking, the pink intifreeze coolant
What to do please!!?
samir kerbadj you need to track down where it is leaking from, once you've fixed the leak you can top it up
Hi
A friend of mine told me that is the water pump, but I'm not sure, the leak is clear pink.
Thanks
samir kerbadj the water pump is on the front left hand side of the engine, if it is leaking it may need removing and resealing or it may actually need replacement, you'll need to look into it to find out what's going on I can't help any more than that I'm afraid
I appreciate, thank you very much for your advices
drop me a message on our Facebook page (follow the link in our channel) and we can give you some pointers on how to go about it, have you for the hand book for your car?
***** fiat only has a terrible reputation in the UK. I'm foreign (come from Belgium but live in the UK) and everywhere else fiat has a very good repution, being known as very reliable and fun to drive. It's italian fun to drive for little money. Only thing that ever goes bad is the electrics on old cars. I don't know why it has such a nasty reputation in the UK, I think it comes from TV shows like top gear and fifth gear that constantly criticise those cars for no reason. In the end, fiats here are VERY cheap second hand, and im fine with that ! 2007 grande punto for 2k pounds : thanks! (they sell for ~4.5k euros anywhere else)
our weather is renowned for killing cars through the 70s and 80s fiat developed a bad reputation for rusting because they were not so well protected as their native counterparts, in the 90s they upped there game which is why you still see a lot of rust free early puntos and cinquecentos but sadly they let this go again so later cars are getting a reputation for rust again
PuntoHowto I have a 2005 fiat Idea, It came with a galvanized 8 year anti corrosion warranty, 10 years old and no sign of rust yet And I live on the north/west of Ireland
can you suck out the oil using a Pela oil extractor suction pump ?
Michael Sherwin I am not sure about that vacuum suction pump pipe diameter but have used a Sealey TP6901 9litre but smaller capicity will be fine and it works fine. the suction tube fits easily into the dipstick hole and easily reaches the bottom of the sump. When empty moving the tube up and down you can hear it tapping sump bottom. All I had to do was sit the pump on a solid base approx 4 inches high so pipe would easily reach. for good oil try Total 5W 30 is very good.
Michael Sherwin I have sucked the oil out of mine every time, done. 180,000 miles no chain changes, recommend 5-30w, think even Fiat don't use 5-40w anymore and recommend 5-30w
شكرا كم من لتر شكراً
I think you'll need 4 at least, its a very old video now so a long time since i've done this oil change.
130,000k on mine so far, I drive around 500k a week, so gearbox oil needs changing
Dave Maher
Mi perde olio dopo aver fatto il cambio
Did you get the seal to seat correctly ? Also needs doing up to the correct tightness, sometimes if the cap of the filter is damaged you have to buy a new cap
No I didn't
That oil is unhealthy to your hands...be carefull mate;)
thanks for the review, but how can a man be with such nails? it's not so aesthetically pleasing ...
How works linea diesel oil pump