Thank you for the video. My dad owned one just like yours. We got it back in the 70s. We lived on 10 acres and he used to plow our gravel driveway in the winter. Also had a brush hog for the field and some disc stuff for the large garden etc. We used use it to pull a small trailer down into the woods to cut wood all day and haul wood home in the evening to burn all winter to stay warm. Looking back that tractor mean't alot to all of the family. Dad died in 2005 of severe lung cancer and mom sold the tractor before she also died of lung cancer in 2018. Thanks for the memories buddy.
Good video we had about 25 cm 10" the other week. Waited a day or 2 except shovel off the front deck and back, side walk along house. The drive way I left and it's all gone now back to green. Thanks entertainment have a good rest of day. See you next year
Dad had 8n on the farm. Handy little tractor. Pushed snow, dug corner post, plowed, hauled and pushed with loader.I still go grade the road for my Mom with the 8n
We had the same "blizzard" blow through here. Didn't feel like a blizzard.... ;-) We have a circular drive, too, and use the '50 8n to clear it, and some lanes for our small farm. The circular drive does require some trial and error to be efficient. At least that was my experience, too. Couple of things that might prove useful for you. I am going to assume your tires are not filled either. You might want to think about chains. I actually use automobile chains. Just two in series for one rear tire. I had them already, so cheap alternative to tractor chains and do help a bunch. You keep them in position with bungees. I also cringed when I saw you pushing the snow onto the lawn after positioning the blade to the rear. I do most of my pushing to the rear (cleaner), but try to use the blade backwards when I go over the grass. Maybe confusing, how I phrased it, but I leave it positioned like I would be pulling the snow, but use the back of the blade, backwards, to push it off the drive. We have gravel so if I do it the opposite, more agressive way, I not only scalp the lawn, I am rake gravel in the spring. Good times... Anyway, Happy New Year to you and yours! Stay safe!
I was plowing with the 9N today again. A few suggestions: First off - There is a reason you cover the car - and it goes for the tractor as well. Next - 12 Volt conversion Neg ground if you haven't already done it. Third - Electronic ignition. Next - Rebuild the carb so you don't have to manually shut off the gas. Last - Get chains.
The heater for it is not that expensive. You can get it on Amazon. I installed it on my 48 Ford 8N tractor. I couldn't believe how the tractor started at blizzard cold snow, sitting outside under the tarp. 6V original ignition system. I know I paid quite a bit for the tractor but it has a loader, two blades. An extra brand new crate engine and transmission. I am thinking of getting a snow blower for it. But I am really not sure if I like the whole idea of snow blower. They throw the snow all over and on you. You have to protect yourself from the dang thing. I like the way your tractor sound. Even after installing new exhaust on mine, it is rather on the noisy side, either it is a cheap muffler or there is still some leak where it mounts on the manifold. [ I am also wondering if it is easier or more effective to push with the blade in the back or pull the snow?. Pushing it seem to dig deeper. I have never really thought much about that choice. I typicall use a dodge ram 4x4 to do the plowing. Sometime I used the tractor. I used both the loader in the front and the blade at the same time. Not sure if that cleans even more or not. I have not paid closer attention to check various combination and angles of the blade etc]
I cold weather cover part of Grill so the engine gets warm otherwise he will be getting condensation in your oil pan and then you will be knocking the rods out people don’t realize in cold weather that oil does not get hot enough to evaporate the moisture
Could I ask you a couple questions? 1. Do you have stabilizer links set up? 2. How long is your top link? 3. Which hole on the tractor side is the top link in? I am setting up my '52 8N for snow plowing and can't find these answers anywhere. I'd really appreciate it!
I have sold this tractor. It’s is really best to just try different setups and see what works best for you. If you want the blade to dig in and scrap make the top link longer. If you’re on gravel and want it to float more make the top link shorter. Just really depends on what you’re doing.
Hey do whatever works for you right. Have you used any implements with the 8n? Bush hog finish mower? If so do you like it. Looking at getting an old 8n . Also in I'm sure you know this but you sound just like ThatDudeInBlue lol.
@@HumbleAcres Thanks for the reply. Just saw your other videos. Love it. And subscribed. Yea I have a Kubota l175 that runs with a 2 cylinder diesel but does smoke a little. Just thinking of selling it and getting an 8n. But I would miss my live pto.
Thanks for making the video. I enjoyed it. Question? Why don't you cover your tractor, tarp it. Keep it out of the elements as much as possible.Iwould think you would want to protect it. It looks like it's a important piece of equipment fot what you do.
I keep it inside in the warmer months and I did in winter as well, but I have found that snow really doesn't hurt anything and we don't get the strong UV rays in the winter.
8N's tend to leak water in around the shifter, starter button and the upper link spring and shaft. The scotch yoke hydraulic pump is on the bottom and the transmission, hydraulic and rear end gears are a common oil...you should cover at least the back half. Also ours has been in the family for 60+ years.... the greatest thing we ever did to it was put on an electronic ignition... hahaha yeah they actually sell them. I'm not affiliated with any suppliers but I bought ours from Yesterday's Tractors...the engine is running before I get the button all the way down hahaha. Wow, no more trying to hold my head, hand, tongue in the exact right place while trying to think of happy thoughts.... good looking tractor you have.
@@doctorfloc 😆😆😆 When he tried to start the tractor, I wasn't watching but could hear the video and I knew exactly what he was trying to start. instinctively, I started saying, come on start!!😆
Please make a video warning people not to try to pull anything too heavy. I bought an 8N a few weeks ago and flipped it backwards Dec 31st. Miraculously I only sprained my ankle but it could have been MUCH worse. The tractor didn't fair as well, I will have it fixed by summer but it was simple ignorance of my equipment that caused it all. Please do this!
Thank you for the video. My dad owned one just like yours. We got it back in the 70s. We lived on 10 acres and he used to plow our gravel driveway in the winter. Also had a brush hog for the field and some disc stuff for the large garden etc. We used use it to pull a small trailer down into the woods to cut wood all day and haul wood home in the evening to burn all winter to stay warm. Looking back that tractor mean't alot to all of the family. Dad died in 2005 of severe lung cancer and mom sold the tractor before she also died of lung cancer in 2018. Thanks for the memories buddy.
love that tractor, looks like it does great in the snow.
Love 8n's ........ any N tractor !
Awesome work. Thanks for sharing. Yes, a new engine block heater would work wonders.
Good video we had about 25 cm 10" the other week. Waited a day or 2 except shovel off the front deck and back, side walk along house. The drive way I left and it's all gone now back to green. Thanks entertainment have a good rest of day. See you next year
Great job! That’s a nice lil tractor and you did good job
Old tractors kept up do a fantastic job..
You got that right!
Nice job buddy!! 👍👍
Love the old 8n Fords.....
I enjoy your videos a lot!
Glad to hear it thanks for watching!
Very nice!!
Great video. We love our 8n, but it’s not our favorite option to move snow. We actually made a video about it.
I’m working on restoring an 8n right now and I’m waiting on some parts so I occupy my time with watching 8n videos lol, keep up the great content!
Update: Tractor is in great running condition, just needs some paint now!
Dad had 8n on the farm. Handy little tractor. Pushed snow, dug corner post, plowed, hauled and pushed with loader.I still go grade the road for my Mom with the 8n
I forgot mowing and raking hay
I was surprised what a nice job that tractor does plowing, but I still like the old "A" better-keep "em coming.
Will do.
Thanks for sharing…
Nice machine. I'm looking at a '49, right now. Seems to be a great tractor for the price.
Yep and parts are readily available.
Definitely change the block heater on the tractor you will be needing it.
These tractor don’t need that nor do they need 12 volts. My 6v 2n starts in -20 with out one
@@finncampeau4922 Same. Running 6 volt and didn't have a note of trouble at -5 F. Proper oil weight would be a bigger issue at such temps.
@@dirtydish6642 correct. I Put thinner oil in and keep a battery charger on it.
We had the same "blizzard" blow through here. Didn't feel like a blizzard.... ;-) We have a circular drive, too, and use the '50 8n to clear it, and some lanes for our small farm. The circular drive does require some trial and error to be efficient. At least that was my experience, too. Couple of things that might prove useful for you. I am going to assume your tires are not filled either. You might want to think about chains. I actually use automobile chains. Just two in series for one rear tire. I had them already, so cheap alternative to tractor chains and do help a bunch. You keep them in position with bungees. I also cringed when I saw you pushing the snow onto the lawn after positioning the blade to the rear. I do most of my pushing to the rear (cleaner), but try to use the blade backwards when I go over the grass. Maybe confusing, how I phrased it, but I leave it positioned like I would be pulling the snow, but use the back of the blade, backwards, to push it off the drive. We have gravel so if I do it the opposite, more agressive way, I not only scalp the lawn, I am rake gravel in the spring. Good times... Anyway, Happy New Year to you and yours! Stay safe!
The ground is usually hard enough I have never had a problem with destroying the grass. Always comes back in the spring.
I was plowing with the 9N today again. A few suggestions:
First off - There is a reason you cover the car - and it goes for the tractor as well.
Next - 12 Volt conversion Neg ground if you haven't already done it.
Third - Electronic ignition.
Next - Rebuild the carb so you don't have to manually shut off the gas.
Last - Get chains.
What about doing a couple of neighbors? We would like to see that too…
The heater for it is not that expensive. You can get it on Amazon.
I installed it on my 48 Ford 8N tractor. I couldn't believe how the tractor started at blizzard cold snow, sitting outside under the tarp. 6V original ignition system.
I know I paid quite a bit for the tractor but it has a loader, two blades. An extra brand new crate engine and transmission.
I am thinking of getting a snow blower for it. But I am really not sure if I like the whole idea of snow blower.
They throw the snow all over and on you. You have to protect yourself from the dang thing.
I like the way your tractor sound. Even after installing new exhaust on mine, it is rather on the noisy side, either it is a cheap muffler or there is still some leak where it mounts on the manifold.
[ I am also wondering if it is easier or more effective to push with the blade in the back or pull the snow?. Pushing it seem to dig deeper. I have never really thought much about that choice. I typicall use a dodge ram 4x4 to do the plowing. Sometime I used the tractor. I used both the loader in the front and the blade at the same time. Not sure if that cleans even more or not. I have not paid closer attention to check various combination and angles of the blade etc]
PVC pipe on the blade, give it a try.
I cold weather cover part of Grill so the engine gets warm otherwise he will be getting condensation in your oil pan and then you will be knocking the rods out people don’t realize in cold weather that oil does not get hot enough to evaporate the moisture
Nice running old Ford.must be 12V converted
you are correct
Could I ask you a couple questions?
1. Do you have stabilizer links set up?
2. How long is your top link?
3. Which hole on the tractor side is the top link in?
I am setting up my '52 8N for snow plowing and can't find these answers anywhere. I'd really appreciate it!
I have sold this tractor. It’s is really best to just try different setups and see what works best for you. If you want the blade to dig in and scrap make the top link longer. If you’re on gravel and want it to float more make the top link shorter. Just really depends on what you’re doing.
Blizzard? Shore of Lake Erie here...
Ya a little bit of an exaggeration.
Hey do whatever works for you right. Have you used any implements with the 8n? Bush hog finish mower? If so do you like it. Looking at getting an old 8n . Also in I'm sure you know this but you sound just like ThatDudeInBlue lol.
Yes. I have baled hay mowed and much more. All videos on my channel.
@@HumbleAcres Thanks for the reply. Just saw your other videos. Love it. And subscribed. Yea I have a Kubota l175 that runs with a 2 cylinder diesel but does smoke a little. Just thinking of selling it and getting an 8n. But I would miss my live pto.
What state are you in? We just got a big snowstorm in PA also
Iowa
@@HumbleAcres very good. Job
Thanks for making the video. I enjoyed it. Question? Why don't you cover your tractor, tarp it. Keep it out of the elements as much as possible.Iwould think you would want to protect it. It looks like it's a important piece of equipment fot what you do.
I keep it inside in the warmer months and I did in winter as well, but I have found that snow really doesn't hurt anything and we don't get the strong UV rays in the winter.
8N's tend to leak water in around the shifter, starter button and the upper link spring and shaft. The scotch yoke hydraulic pump is on the bottom and the transmission, hydraulic and rear end gears are a common oil...you should cover at least the back half. Also ours has been in the family for 60+ years.... the greatest thing we ever did to it was put on an electronic ignition... hahaha yeah they actually sell them. I'm not affiliated with any suppliers but I bought ours from Yesterday's Tractors...the engine is running before I get the button all the way down hahaha. Wow, no more trying to hold my head, hand, tongue in the exact right place while trying to think of happy thoughts.... good looking tractor you have.
@@doctorfloc 😆😆😆 When he tried to start the tractor, I wasn't watching but could hear the video and I knew exactly what he was trying to start. instinctively, I started saying, come on start!!😆
@@stevegoehring1610 Hahaha... starting them before 12v and electronic ignition... that was ..an emotional experience
Storm? We're I am anything less then 6" is a dusting
Ya little bit of an over exaggeration, sorry.
You need a 30 by 40 pole building.
Yep
Where is the blizzard?
Please make a video warning people not to try to pull anything too heavy. I bought an 8N a few weeks ago and flipped it backwards Dec 31st. Miraculously I only sprained my ankle but it could have been MUCH worse. The tractor didn't fair as well, I will have it fixed by summer but it was simple ignorance of my equipment that caused it all. Please do this!
Common sense would help your case
Sounds like you need a new starter drive
Whenever the engine fires the starter disengages. I believe that is how it is supposed to work.
Most people push snow. You seem to like pulling it.
It works for me
You’d do better flipping the blade around and plowing in reverse the whole time. Used to do that when I was younger. Better control.
I have done that before and it works good in some situations.
anyone need a 6 volt generator?