It's an older video, but still helped me and my son replace a window in a 1989 Toyota pickup. Actual video of the cord trick is so much easier to understand than trying to figure out what a written description is describing. Thanks and well done!
I didn't think this would actually work but it did! Took me a couple tries cause my rope was to thick but I eventually got it. Thanks so much for the video! You saved me almost 400$!
I tried the install trick I was at my window for three hours beforehand ,it took me 5min no lube, no joke with this trick whoever came up with it was a genius.thankyou.
Brad, thank you for the clear instructive video and especially the advice about trying it again if first you don't succeed. I just installed a new sliding rear window and seal in the restoration of an '83 f150 Flareside. Doing it by myself was not easy, especially at 80 yo. The first try I couldn't get the seal, but the second time was a charm.
Thanks so much Brad..took it out with ease last fall..just put it back in tonight .and your method made it so easy to install..had it in in 5 min. Awesome video.
Thanks for the great info Brad! Didn't realize it was so easy. Love the Ford truck graveyard in the background. I saw one that looked just like my 87'.
Thank you so much for the rope trick. I followed your instructions and extra tips and it made my window replacement so easy. It helps to really clean and prep before installing. I have a 97 F250.
I'm getting ready to remove the rear glass on a 78 pinto wagon and weld my customer's broken hatch, this is a great, very informative, and above all, to the point video. Thanks for the info.
Wow! Thanks this is the best video instruction I ever have found. I am impressed by your knowledge and how easy you make this project. I bever done anything like thus before. And I thought window removal was very difficult. Thanks again sir for teaching us what us all about .
Wow I can't believe it's that easy and quick! I'm going to try it right now😂, just kidding, I'm not ready yet. Thanks you're saving me money I could put towards my project truck.
You rock brad thanks for the great video, took me 4 mins to install my window and never yelled once at the woman helping me... to be honest we watched another video before yours and the idiot made it so complicated my woman didn't want to help me
THANK YOU Brad! That's how Jeep CJ-7 windshields are. Not the two piece rubber and glue. And the local glass shop quoted me high (120 bucks sounds high, right?)...so I found your video.....now If I don't break it......I'll have a new skill
Thank you so much for this I have a Ford Ranger which I want to open up to a sleeper camper in the back and if I can take the window out at least a lot of it out this will work out good I can even put a framing near I guess and grape some vinyl vinyl clear vinyl stuff so it can make sure the rain that comes through will drop down between a truck the great video thanks so much very valuable
Awesome. I"m working on a project where I'm welding the back of a nissan cab to toyota camry "truck-car". This helped me a bunch save the glass from the welder
We replaced a broken slider with a flat glass and new gasket . I wasn't easy & took four tries but we got it ! Don't give up ! lol It would be much easier with an old gasket
Thanks for the video. I just wanted it done before winter and I’m by myself so I ended up getting a new slider and gasket installed on my 83 f150. It still leaks. I had a 4 piece vented slider but the glass shop replaced it with a 3 piece. Does that matter? Also,I got a new cab light, before I put it on I covered the hole to make sure that wasn’t where the leak was coming from.
I watched ur video because I had a huge limb fall on my 2000 Cadillac Seville and it shattered the glass. I tried getting the seal out but it was ruined. I went to the junk yard to get a new back window and I tried to save that seal as well but it also got ripped up and to destroyed to salvage. I was able to get the window out and I got the window installed onto my car but I have no rubber seal that goes around the window. Where can I order a new one? I called my local Cadillac dealer but they said they couldn’t order that for a car as old as mine.
On one video I saw that you removed the back seat upper back rest and the seat belt before installing. This one you didn’t. Does it have to be done? Difference between straight cab and extended cab?
Hey Brad! Thanks so much for your great videos! I have a 1987 F150 with a sliding rear window. I have to replace the sliding windows and have been trying to figure out how to get the old ones out. Seeing this video, I think I have to use your technique shown here to remove the window completely. That will allow me to remove the old sliding windows and install the new one. Can you please let me know if I am on the right track?
It's an older video, but still helped me and my son replace a window in a 1989 Toyota pickup. Actual video of the cord trick is so much easier to understand than trying to figure out what a written description is describing. Thanks and well done!
I can’t imagine how much money you’ve saved people with your videos. Thank you!
No nonsense clear instructions. Very helpful. Well done and much appreciated.
So many channels now a days are full of bs this video rocked
I didn't think this would actually work but it did! Took me a couple tries cause my rope was to thick but I eventually got it. Thanks so much for the video! You saved me almost 400$!
I tried the install trick I was at my window for three hours beforehand ,it took me 5min no lube, no joke with this trick whoever came up with it was a genius.thankyou.
Brad, thank you for the clear instructive video and especially the advice about trying it again if first you don't succeed. I just installed a new sliding rear window and seal in the restoration of an '83 f150 Flareside. Doing it by myself was not easy, especially at 80 yo. The first try I couldn't get the seal, but the second time was a charm.
Very welcome!
Thanks for the video Brad. I was able to get my old window out and the new one put back in in less than 10 minutes. Very helpful!
We needed to remove the back window on a 1990 Ford ranger. This video made that possible! Thank you so much! 😊
This is awesome i feel pretty confident to take on the task got a 96 you made it look super easy thanks for the video much appreciated
Its great to see a how to video without all the drama some guys have making these ! Great job guys thanks for the help !
well, Brad, you're the MAN!!
I just did my f250, worked perfectly!
Thanks sooooo much!
I was really dreading doing this!
Terrific video. I did this sort of replacement once 30 years ago and now my bad memory is no issue at all. I will just follow you.
Hi, Great job! I did this to my 79 f-250 after watching your video and it worked perfect! Thanks for posting such a helpful video.
Thanks so much Brad..took it out with ease last fall..just put it back in tonight .and your method made it so easy to install..had it in in 5 min. Awesome video.
Thank you,thank you, thank you!!! Your video tutorial was just fine and I had no problems replacing the window for my 99 F250. 👍👌
Thank you so much ! For an auto mechanic I know engine's but was nervous on glass but you made me confident enough to try this on my own !
Thanks for the great info Brad! Didn't realize it was so easy. Love the Ford truck graveyard in the background. I saw one that looked just like my 87'.
Thank you so much for the rope trick. I followed your instructions and extra tips and it made my window replacement so easy. It helps to really clean and prep before installing. I have a 97 F250.
I'm getting ready to remove the rear glass on a 78 pinto wagon and weld my customer's broken hatch, this is a great, very informative, and above all, to the point video. Thanks for the info.
Thank you so much for making this video. I used your guidance to remove and install a rear window on my 1988 F250
genius move with the chord. thanks brad
Thanks to your great video I actually pulled out the broken slider and installed the new one in 30 minutes. Well Done Video
That rope trick is nice. I've never done a window like that, but I've had other projects in which that method will help greatly!
Thanks Brad. I think you just saved me about $200 bucks for 10 minutes worth the work!
Thank you so much for the video! Dang you made that look easy!!! I sure appreciate it!!
Great video and very descriptive ! Look at all those Ford OBS body trucks ! 😍
Wow! Thanks this is the best video instruction I ever have found. I am impressed by your knowledge and how easy you make this project. I bever done anything like thus before. And I thought window removal was very difficult. Thanks again sir for teaching us what us all about .
Brad you made that look so easy and it's not all that bad thanks
Great tutorial! Thanks for taking time at the junkyard to do it.
EXCELLENT YOU WENT RIGHT TO THE POINT.
EASY AND ACCURATE.
THANK YOU.
Great video ! I hope it goes as easy for me as you make it look. Much appreciated.
Wow I can't believe it's that easy and quick! I'm going to try it right now😂, just kidding, I'm not ready yet. Thanks you're saving me money I could put towards my project truck.
That rope trick is amazing! Thanks
Thank you so much brotha huge help.great vid and brilliant with the rope
This worked for my Jeep J truck, Thanks for the video.
Thanks...this was always a mystery to me , now I can remove my window and replace it with a pop out window..thanks again.
Nice job Brad. Your a good teacher. 👍
simple engineering genius! Nice work.
You rock brad thanks for the great video, took me 4 mins to install my window and never yelled once at the woman helping me... to be honest we watched another video before yours and the idiot made it so complicated my woman didn't want to help me
Dude, you are my hero. Worked great for me thanks.
THANK YOU Brad! That's how Jeep CJ-7 windshields are. Not the two piece rubber and glue. And the local glass shop quoted me high (120 bucks sounds high, right?)...so I found your video.....now If I don't break it......I'll have a new skill
Love your video... Thanks from Australia.
im going to try now! 93 f 250.
you made it look easy!!
thanks
good luck
Thank you so much for this I have a Ford Ranger which I want to open up to a sleeper camper in the back and if I can take the window out at least a lot of it out this will work out good I can even put a framing near I guess and grape some vinyl vinyl clear vinyl stuff so it can make sure the rain that comes through will drop down between a truck the great video thanks so much very valuable
Outstanding tutorial!!! Thanks you so much!!!
Awesome. I"m working on a project where I'm welding the back of a nissan cab to toyota camry "truck-car". This helped me a bunch save the glass from the welder
Zack Rose I have to have pics man!
Zack Rose please send me a pick at pcrefresher@gmail.com or friend me on Facebook it's
Steve freisch
Gonna try it this weekend. 07 Chevy Hoping for the best!
Great clear video that is a big help - THANKS
I wish I had a junk yard like that around where I live
brad, you rock! thank you!
Excellent tutorial, thanks!
Thank you brother. I appreciate the walk through
Great video helped me a lot appreciate it
Worked great on my jeep j20.
Great work Bro
Thanks From CHILE 🇨🇱
Great simple way to do this thank you!
Man you're awesome. Made that look easy!
Thank you for your video God bless you
This helped me, thank you for the info! Great video
cool video man. thanks. i gotta do this to my ford ranger.
Great video , Sir ..
Thank you 🍻
Thank you very much I learn something new
Great video, thank you!
GENIUS. .. .Thank you very much!
You're awesome. Thanks!
thank you Brad
We replaced a broken slider with a flat glass and new gasket . I wasn't easy & took four tries but we got it ! Don't give up ! lol It would be much easier with an old gasket
The rope idea was genius.
Great Video
WOW GREAT VIDEO YOU MADE IOT LOOK SO EASY THANX
Glad it helped!
Thanks, super helpful 👍
good job brother my next project. thanks for sharing 👍
Dude that's awesome!
Thanks for the video.
I just wanted it done before winter and I’m by myself so I ended up getting a new slider and gasket installed on my 83 f150. It still leaks. I had a 4 piece vented slider but the glass shop replaced it with a 3 piece. Does that matter?
Also,I got a new cab light, before I put it on I covered the hole to make sure that wasn’t where the leak was coming from.
you are the MAN
Very helpful thank you sir.
Genius, thank you for sharing
cool hopfuly a 1984 backglass will go right in my 73 ford as it dident change from 73 to 97 should be fun
Thanks for sharing the knowledge
Wow this was very helpful thx
Thanks for this
Thank You!
I watched ur video because I had a huge limb fall on my 2000 Cadillac Seville and it shattered the glass. I tried getting the seal out but it was ruined. I went to the junk yard to get a new back window and I tried to save that seal as well but it also got ripped up and to destroyed to salvage. I was able to get the window out and I got the window installed onto my car but I have no rubber seal that goes around the window. Where can I order a new one? I called my local Cadillac dealer but they said they couldn’t order that for a car as old as mine.
Very nice Brad. That takes a lot of apprehension out of my situation. Thanks!
Well it's in but the gasket didn't cover the bottom corners on the outside. Did I mess up or is that normal on a aftermarket slider?
Thanks brad
On one video I saw that you removed the back seat upper back rest and the seat belt before installing. This one you didn’t. Does it have to be done? Difference between straight cab and extended cab?
did'nt find video to show me how to install a back window for a 1997 ford ranger. found 2 guys that talked the job thru but no video on the actual job
What boneyard are you in? There are many trucks there that have parts I need. Old fords are hard to find good parts for.
BRAVO !!!!
Gracias 😉
I appreciate you!
es chingon el viejon
Fantastic .
yeah, does it not need sealant?
Hey Brad! Thanks so much for your great videos!
I have a 1987 F150 with a sliding rear window. I have to replace the sliding windows and have been trying to figure out how to get the old ones out. Seeing this video, I think I have to use your technique shown here to remove the window completely. That will allow me to remove the old sliding windows and install the new one.
Can you please let me know if I am on the right track?
its easier to break it and call insurance and get safelite to do it
Wow..gracias..!!!
DAMN good video.....just about to do this to a project truck
thx
Thank you sir
Thanks !!!