How to Fit Nissan Navara D40 Pathfinder Cabstar timing chain upgrade new latest advice
Vložit
- čas přidán 24. 10. 2015
- Hello and welcome to our channel, We are Yorkshire's leading independent engine repair specialists. Our team of staff is fully trained and qualified for the UK's leading standards. Please feel free to get in touch for advice and support both public and trade as we are always happy to help. Call Please contact us on + 44 0 1274 640028 for more inquiries.
We hope this video is of some help in repairs.
You need to to do a fuel pump reset every time you do a fuel filter replacement this will give you better fuel economy and help save you money in future parts ie Injectors, and fuel cost's.
Subscribe to our channel and we will teach you everything about the Nissan 4x4.
Call 44 (0) 1274 640028 email westyorkshireengines@gmail.com for free Technical Support.
We send parts Worldwide please feel free to get in touch for full honest experienced Nissan support.
Want to learn more about this kit? then join our facebook page! we supply a huge range of nissan Navara, Cabstar and pathfinder parts all available in stock.
Join Here -- / 323858497946272
Fitted my timing chain upgrade kit last weekend, couldn't have completed it without your vids, many thanks, happy navara owner 👍👍👍
How it is handling your new upgrade timing chain after these years?
What kind or brand of kit is that UPGRADE ????
I just googled "does nissan pathfinder have a timing chain" and your vid link came up... the reason I clicked on it was because of the place name "west yorkshire" oh my home county, not only that your in my home town "Bradford" that I left 40 years ago.... So I watched your video just to hear the Bradfordian accent and I was amazed at what you had taught me about this engine Thanks for the informative video
Just took my D22 to West Yorkshire engine services for the shell upgrades and the timing chain upgrade plus a new clutch.
Arrived to a warm welcome, very friendly and informative.
I was even given a lift to the railway station which was only 2 miles away but still no trouble for them.
Thanks Les & Suzanne
Nice
kenny crossland o
What a beefy chain upgrade! Very nice the business. You can obviously tell you are pros in this field.
Gday , we have successfully done a timing chain kit upgrade with engine still in the vehicle. Just want to say that we would not have got very far without you videos. Thanks to you all . From Australia 🇦🇺
Thanks, Buddy all the best Des
gavmegs ..how do I purchase the kit ..also in Australia..thank you
Great vid pal! I’m from Rochdale but moved to NZ, currently looking at getting a D40, so really enjoying your channel! All the best
What a great instructional video. You certainly know Nissan stuff and how to pass on your obviously extensive knowledge. Thanks! 😀
Robert Naumann
Wow. Never saw that before. Amazing! Thanks.
I may of put my comment on the wrong video but I just wanted to say a big Thanks for your videos. It helped me out tremendously. Doing a service on my car. Which is a Nissan pathfinder 2009
The only massive issue I had was trying to remove the oil filter. Totally seized and over tightened by who ever did it last. I ended up have to take the wheel off & cowling. But the worst part was the metal pipe just above the oil filter. Thanks Nissan for your stupid design of where you decided to put the oil filter. Nothing worked even trying above the engine which I tried to do before having to resort to removing wheel etc
If its wasn't for your great videos. Which has taken me 2 weeks to find. I think I would of given up. I wish there was more garages that's as good & as honest as you. Specially this day and age. Which is hard to find.
And is willing to share some advice & tips to help people such as myself that has been let down by garages.
Really appreciate your wealth of knowledge. And will certainly be considering buying parts from your garage.
Than the over inflated Nissan dealer where I'm based. They charged me £5 + vat for a sump plug brass washer. And wasn't even prepared to tell me the torque spec on the serpentine belt pulleys which needed changing. And stretched belts.
Your a breath of fresh air, And is really appreciated I do hope I have your name right Des thanks again buddy can't thank you enough I've Subscribed
👍👍👍👍
Love your videos, iv only just started to play with these, very helpful! Thanks from Australia 🇦🇺
JACK JACKSON thanks buddy
Thank you for telling me about the oil pump O ring, I had just put a new head, water pump and timing chains on my D40, and wondered why the hell the oil light would stay on for 30 seconds after starting. Well after looking at this, I have now pulled it back down and guess what, I need a new O ring, thank you so much for your no bullshit and very informative videos.
Did u use a new o ring or just use atv 🤔
Thanks for the video. I was thinking to upgrade timing chain, definitely something better than Nissan supplied.
Great job guys!
Good stuff guys. Just did an in chases timing chain upgrade.
good video! just did the job..seems to work allright. one detail i think is an improvement: when fitting tthe lower chain cover, i took out the locating pin.then, i could fit the chain cover without endangering the vital oil seal. tighten the bolts slightly, then hammer in a new pin/piece of 8 mm tube. the old one cannot be reused, its a very thinwalled tube, gets bent with the removal.
excelente viejo te felicito tu tutorial!!!!!!
thank you so much for your videos!
I have a 2010 Nissan Navara.
my Q is: can a badly fitted timing chain where bolts are missing cause clutch problems,s through excessive engine vibration?
Good video and informative.keep it up guys
Thanks you for your help
greetings from Kurdistan ... thank very much for the great VIDs I like how you work ..
I'm working in the same industry as well and I hope you could make a Vid for the how to set the engine on TDC and how to install the fuel injection pump
thanks
There is a video on this we did it some time ago tdc for the d40 is about 8 oclock and on the d22 it is at 12 oclock
Great video. Knocked the woodruff keys out and shattered them when replacing the crankshaft seal so this helps alot.
Nice one!
Bom trabalho! Parabéns!
These are the types of videos I love making & watching on CZcams. nice work!
Super Video !
Хорошее видео
Спасибо 👍
Very good job thanks
Gayan Sajith ล
Excelente video 👍
Top Work
دخان ابيض وطقطيش
Wurth sealant ...... awesome !
Thank you for the explanation. Today I started installing a motor just like it
Nice and informative videos, thanks a lot for your technical advice.
Man u are really good
Me too thanks very much for this valuable information 👍👍👍cheers mate
Great information . Thank you .
genial . Buen trabajo. saludos
Suscribed and like, Nice Video, and i never never look the inside Gear and Chain Timming of a NISSAN Navara Engine, is so Amazing, Hard Like HULK
good video,,,,,,,,,,,,well impressed
Hi Yorkshire service, can you show us how you set fuel injection to DTC and markings on them you doing great job congratulations from Australia
You are awesome Des. I am learning so much from you that I now feel I am a Nissan Pathfinder/Navara specialist. One question: can you please put up a video or tell me how many NM do I torque the cylinder head bolts and cam caps. I can’t seem to find the torque specifications anywhere.
Head bolts 39nm cam caps 16nm cheers mate happy fitting
I am mechanical.i VB like this
good video. maybe a video to check whether the engine has suffered catastrophic damage due to a chain break?
Can you do a video on setting up the Throttle Position Sensor for the Nissan TD27t engine??? This engine was widely used on the d21 chassis.
Hi mate your videos are pretty much the best I’ve seen by far. You’ve helped me a lot! Would you know of any mechanics in Brisbane Australia that will be able to replace my timing chain? It’s done 200000kms and it’s just started to make that loud ticking noise. Please help
hey mate our d40 nav spain did the timming chains and the head. would it be cheaper to buy a lower ks engine?
the cams are stuff valves are stuff one injector wont come out
Great videos
First Class instructional video .
Very good experience
Thanks for for all your videos they're so great video about nissan yd25 engine lam from papua new Guinea thanks
Do you stock the rear engine lifting brackets? I rang nissan and apparently they dont sell them.
Alternatively, how would i support the engine for lifting?
One final question, is there any benefit of going with the d40 engine block over the d22 engine block or using parts like the oil pick up from the d40 on my d22 engine?
i like this one.
Do you ever fix x trails with 2.2 DCI...?
I would like to know which brand of Distribution kit you use on the engines you repair
ขอบคุณที่แบ่งปั่นความรู้
thank you so much this video maker otherwise difficult to fix timing change no experience
as a cummings man.
Mega filmik 😀👍
Zapraszamy do nas na filmiki
I'm wondering if its possible to remove the 2 dowels from engine and load into the cover so you can avoid the o-ring issue?
Hi mate, how does the vac pump up grade come out and in ? Great videos and advice many thanks
thanks شكرا
Hi, I noticed your video makes no mention of the use of shim plates behind the fuel pump sprocket for alignment relative to the vacuum and crank sprockets. Why is that?
Hi all. Great and helpful vids. Wish I lived near ya( I'm in Bristol) about to buy 07Navara from my work and it's started stalling! Sounds like cam sensor!? Timing chain? Or both. Can you give me details of chain kit you can supply and£££? Or anyone in this part of the country you might recommend to do the work? Going through your vids and starting to have second thoughts!! Anyway hope to hear from you with any advice.keep up the good fight!
Dude you my friend are amazing.
Thx.
Looking into purchasing a 2004 navara d22 but read the horror stories about them.
how much does this upgrade usually cost to do?
If you want.. only bye a 100% japanese manufactured and notice the engine it should have Asco n Amco n Aisen seal at the engine side never ever bye other then original Japanese..
Others are all chainees selly n rabish engineering
bravo
I think my d40 cam chain has snapped. It was making a similar noise to that one. It went as I tried to start it so what’s the chance of my valves being shagged?
hi mate awesome channel awesome info I got a question I got a Nissan cabstar 34.10 with 2 rubber mounts on the back and 2 on the front so am I right in saying the cab does not tilt forward as I need to weld the underneath thanks
hello nice video I have a question my 06 infiniti m35 started to make a knocking noise / ticking now it lost oil pressure at first when you first start it it only made a ticking not really knocking noise it would go away after you gave it gas now it really has a rod type of knock I think I caught it at the early stages before it spun a bearing any advice is greatly appreciated
Hello West Yorkshire Engine Service.
Thanks for your amazing videos. You have helped me with my lemon of a D40 better than a manual.
Latest prob is crank is worn about 50 thou and con rod. Finding it hard to fix. Is a Thai or Spanish crank interchangeable. Navara ST-X 2011
Diesel YD25DDTi. MNTNCUD40A
Thank You.
With the 2019 model of nissan navara can you say the timing chain are more realiable than the older version ?
Watch all your videos'm having problems with my engine and Yd 25 ddti when I turn my engine it takes to turn off the indicator of oil pressure and make noise in the current command which may be happening already changed the command full current and the problem percisste u could help me
Single roller timing chain on a diesel engine ?
Nissan must be crazy.
Hi if the engine has been running prior,can you still turn the engine by hand to time it up. I need to check a few things not related to a rebuild ...im doing some calculations but hard to explain really thanks inadvance
Megadta magát a felső láncfeszítő, miatta cserélném kellett a teljes vezérlést, nagyon jó útmutató videó, köszönöm.
Km mennyi volt benne?
@@petermolnar8667 az eredeti elment 370 ezret, utángyártott követte , nem ment 30 ezret megnyúlt a lánc , megadta magát a feszítő és ugrott is a lánc .
Thanks
Is this only available for the D40 Nevarra or can it be used on other engines, such as the VG40DE found in Xterra's, Pathfinder's, Frontier's, 370z, etc?
Is it true that if you keep up with the services on the st-r d22 2.5 diesel. You won’t have to change the timing chain after the 120,000 replacement?
Thnkyou good gup
grazie mille tutto perfetto
Hy I'm Paul from malta first of all thanks to help many mechanics even me with your information. .the second thing i fix many Nissan navara in malta and now 1 Nissan navara 2007 d40 is coming with noise is pinking when press the gas more than 2500rpm in the same time is very smoke white .the engine is working 100% but when press the gas more than 2500rpm the engine make this noise the torque of the engine is very good. Is possible the injectors ? If I find this problem i put the answer here guys ceers
Hi guys love the informative videos. A question i have a nissan navara d40 2012 spanish built 4wd. where can i order the duplex timing chain upgrade kit for it. i found one on ebay but it said it was not compatible with my car.
or can i buy direct from you guys
Yes you get the duplex from us call 01274 663999
Hello, thank you very much for the detailed presentation.
Qtn? Is there a gasket between the cam chain (top chain) tensioner and the block?
Thanks a lot
Very nice sir
Do you need the whole kit ie sprockets incl really?
do you do any performance upgrades on the d40 engine? mines due for a rebuild but want more torque
Sorry no we dont leave it as standard as poss cause it will cost you more in the future.
Just hit 70000 miles in my 2007 pathfinder, considering undertaking this mod soon as i like to keep the jeep in good nick. Do you have plans to make a video showing the change of chains for the r51?
Hi chains on the R51 are the same as the D40 Navara.
thanks mate.
Omfg, those 3 bolts that hold the Catalytic converter, super hot here in Australia, i ended up using extention bar, with makita impact driver, the 3rd bolt, i took the front wheel off to get access to it. 😳
Hi Guys, excellent informative video, obviously know your stuff, i will be in touch for a Timing chain kit, Alan Diesel mechanic in West Australia
Is there other way to remove vacuum pump rather than opening the timing chain compartment? cheers
Does some yd25 engines come without balancing shaft, i saw on this vid that your sump is on but there is not balancing shaft, please advise.
Yeah mate. My Thai built 2009 d22 with a yd25 has no balance shaft
Hello there can I know where can I downloaded the Nissan navara d40 workshop manual?
Does that timing chane fit the D40 2.5 letter year 2013 and it's the Span model built one
Yes we do an upgrade kit for your model.
My uncle will buy nissan navara😊😊😊:)
Hi , I have a Bavaria with the same engine and the chain broke , is this engine a interference engine so pistons and valves touch ? Thanks in advance
Do you have knowledge on the 3.5 petrol v6 engine as fitted to Nissan Elgrand e51
great video just replaced cam chain and tensioner
hi do you know what the cam gear sprocket torque specs is for a d40 navara 2.5 diesel thanks
Hi. Thanks for your very informative videos. I am a Engine Re-conditioner by trade but have never messed with a Diesel Engine before. Recently purchased a 2011 Navara D40 DDTI with a engine problem & would like to know where in AU i can purchase the Upgrade Timing Chain Kit that you recommend. A link or Business name in AU that supplies would be much appreciated. Thx in Advance
What is the resource of the BGA kit for YD25DDTi (Nissan Pathfinder) compared to the original?
hi there I have got a nissan navara 2007 yd25 which need a timing chain change can you advice where i can find high quality timing chain kit as i do not intend to buy it directly from nissan dealer. thank you
Thak you
good
Hi today I replace clutch for Nissan. X trail 2.2. After start engine make a lot noise come up p0016 Cam sensor. Maybe timing out ?