Kudos for showing an honest common error forgetting to install the seats & springs first and having to redo the work. I’ve done something similar. Great video
Awesome video! All the others had a cylindrical cartridge and I had no clue what the heck I was looking at. Going down to the hardware store tomorrow, here goes nothing!
I'm impressed. I usually need three hands to do these type of projects and you can manage with one hand. Also, enjoyed your added sound effects...Bing, bing, bing...boing, boing, boing...done.
Thank u. I replaced my delta cartridge today and water was not turning off. However I put springs faci.g me instead of away. That may be the problem?? I will try it tomorrow
Step two: Drink beer, while deciding as to whether or not you want to continue with the project. If you drink enough, you'll probably decide to take a break. Hince: You'll likely safe yourself a little work, by deciding to finish later when you're not half drunk!🥴 Ps: Be sure to turn water back on. Better to have a leaky faucet than not have a shower for the next 6 months while you're trying to work up the courage to try again!😄
Just replaced mine cuz I thought it was the fix for my low hot water pressure….I was wrong! Still troubleshooting my reason for having low hot water pressure in my tub/shower only. New shower head, neck, spout and water valve. Moving to the hot water tank next
Info was good, but the video itself wasn't so great because of the one handedness made the picture not the greatest. Maybe consider a mounted camera if you're going to do more? If scratches from the wrench are ever are a bigger concern, I'd recommend a rubber strap wrench, sometimes also called oil filter wrench.
Thanks for the video. Maybe someone can help. After reassembly water now shoots out of the slot where the lever comes out. No matter what I do. Any help appreciated.
I figured it out. At least in my case, calcium from the old inner hardware shot up to the shower head and blocked the water in the shower head filter. Once I took the head off, water flowed perfectly.
Hey, can anyone help! I changed mine just like this video. My set came with the seals and springs. After I changed everything, the nob is very tight to turn and adjust water temperature. Please help.
@alpharettaleasing6492 yes the silicone on the ball, springs n seats is key for longevity just like oiling the seal when changing oil lol. Also inner portion that is used to tighten by key! Only just snug the cap then tighten inner portion to final resistance. Do not just crush down on the cap
Its good...but too shaky...I could not watch the ending. I will have to slow the speed. Also why is the shower hose hanging down when you are fixing....you should have hung it up.
Kudos for showing an honest common error forgetting to install the seats & springs first and having to redo the work. I’ve done something similar. Great video
Thanks Brother for saving me the cost of a Plumber!
Hey, I’m currently in plumbing school. The instructor showed one of your videos, the flushometer one straight to the point no bs I loved it.
save my life bros. looking all over the internet for the right ball cartridge, did not know I could upgrade since they don't sell the old one anymore.
Awesome video! All the others had a cylindrical cartridge and I had no clue what the heck I was looking at. Going down to the hardware store tomorrow, here goes nothing!
Thank you! The kit I bought didn't have instructions. Even though it wasn't an exact match, your video was enough to get me through the project. 😀
Thank you. After screwing up twice, I watched this and got it right.
I'm impressed. I usually need three hands to do these type of projects and you can manage with one hand. Also, enjoyed your added sound effects...Bing, bing, bing...boing, boing, boing...done.
😂😅🤣
Using a puppy pad to stand on is absolutely brilliant.
Thanks for this..... im still shtting my pants to do this lol
Thanks, this is exactly what I need to do.
Thank you for sharing your wisdom
Thank you for sharing. How much should I change for this kind of job?
Badass! Thank you for your expertise! You saved me a ton.
RP70 ball used in shower with lever handle.
Thank u. I replaced my delta cartridge today and water was not turning off. However I put springs faci.g me instead of away. That may be the problem?? I will try it tomorrow
Step one: turn off the water supply
Step two: Drink beer, while deciding as to whether or not you want to continue with the project.
If you drink enough, you'll probably decide to take a break. Hince: You'll likely safe yourself a little work, by deciding to finish later when you're not half drunk!🥴
Ps: Be sure to turn water back on. Better to have a leaky faucet than not have a shower for the next 6 months while you're trying to work up the courage to try again!😄
@@jackpayne3996 yes! definitely need step two.
Iam replacing old cartouche thank you for information
Just replaced mine cuz I thought it was the fix for my low hot water pressure….I was wrong! Still troubleshooting my reason for having low hot water pressure in my tub/shower only. New shower head, neck, spout and water valve. Moving to the hot water tank next
Same here but I do have good press to the fixture. Very little after repairs
Lol don’t think we didn’t see the o ring get pinched when you put it in the valve 😂
Info was good, but the video itself wasn't so great because of the one handedness made the picture not the greatest. Maybe consider a mounted camera if you're going to do more? If scratches from the wrench are ever are a bigger concern, I'd recommend a rubber strap wrench, sometimes also called oil filter wrench.
thxs, nice $200 save
can you please write in comment what kind of grease that you are using in this video. thanks
Plumber's grease
Thanks for the video. Maybe someone can help. After reassembly water now shoots out of the slot where the lever comes out. No matter what I do. Any help appreciated.
I figured it out. At least in my case, calcium from the old inner hardware shot up to the shower head and blocked the water in the shower head filter. Once I took the head off, water flowed perfectly.
Thank you
Good shit
I rebuilt mine now low water pressure. any ideas
Hey, can anyone help! I changed mine just like this video. My set came with the seals and springs. After I changed everything, the nob is very tight to turn and adjust water temperature. Please help.
U fix it? I kno y if u havnt
@@dr.greenthumb6535 You think he has not used the plumbers grease, secondly and mainly he tightened really hard?
@alpharettaleasing6492 yes the silicone on the ball, springs n seats is key for longevity just like oiling the seal when changing oil lol. Also inner portion that is used to tighten by key! Only just snug the cap then tighten inner portion to final resistance. Do not just crush down on the cap
Replace it with a moen positemp easiest cartridge to change ever
Just had this happen to me. Took everything out and greased it like crazy. Works great now.
I need your help i can’t fix my shower and the water can’t come back until I do!
Thank you so much
I replaced mine but after 2 weeks starting leaking again!!
Thanks!
Ours does not screw off so easily. We are struggling so much.
The springs keep falling out. Any suggestions
The grease will help hold them in
Absolutely respect that you left in the eff up lol. 🫡
Can't get past taking off the dome. That thing must be welded on some kind of way.
someone put a kitchen one in my bathroom 😭😭😭
DELTA RP77739A Repair Kit costs $28.82 at Home Depot. Easy repair.
You can use the Danco kit for less and has exactly the same parts.
Camera skilz? I’m dizzy …
What kind of Grease is that
Silicone based food grade plumbers grease
@@Offroadigansplumbingco.7966 damn that's complicated do they have it at Home Depot in the plumbing section?
@@Miketaylornews
They should have there own brand there yes
i go to consolidated supply of they have that in your area
@@Offroadigansplumbingco.7966 ok.. I wonder if I can just use some silicone lubricant you get at a auto parts store.
Bro I would not do that
It has to be food safe or you will contaminate your drinking water and make you sick
Its good...but too shaky...I could not watch the ending. I will have to slow the speed. Also why is the shower hose hanging down when you are fixing....you should have hung it up.