DREAM S15 HITS THE DYNO - did I make the right call?
Vložit
- čas přidán 22. 09. 2022
- ShopJimmyO.com
Support the build!!
/ jimmyoakes
/ jimmyoakes
Send some sub mail!!
Jimmy Oakes
PMB 169
61 N. Plains Industrial Rd.
Wallingford, CT 06492 - Auta a dopravní prostředky
Use code JIMMYO130 to get $130 off across 6 Factor boxes at bit.ly/3BPaZWt!
Can you put chapter marks in so we can skip your paid promotions easier?
@@jamesgottfriedson5060 or I got a novel idea just watch it and stop whining like a lil bitch
@@jamesgottfriedson5060 they don't take long. If you only keep watching them you help him out. Its free content at least watch the add.
Keep the heaterbox in the e36 for when it rains and is cold 🥶 nothing worse than cold feet at a track day and a misted up windscreen on a wet track day . 👌💯🤙
Right
This video clearly shows how adding spoon to the shop improves the content. This would have normally been just a S15 on the dyno vid. But we got to also see the BMW get gutted and build plans clearly defined. I'm so impressed I had to mention it.
So I can't wait for the 86 vtec build. Coz then spoon be in his full glory
🎉🎉🎉
Lmao what are you talking about Jimmy has always done this type of content. All he suggested was to gut the car I must be watching a different channel
@@jamesireland9188 fr Jimmy is always super neurotic about his builds. It’s not that spoon made the build clearly defines he’s just a 2nd opinion that pushes Jimmy to go harder
Is the camera guy gone by the way?
It's great to see Spoon pushing Jim out of his comfort zone and into harder more concrete decisions. Spoon is 100% a great addition to the gang. I said it before and i'll say it again. Spoon would have been great with either Aki or Jimmy and he definitely proved me right. ALSO, gotta love that "Catfish Vtec" phrase Spoon hit Jimmy with. LOL
right
When Jim put the clutch in and it didn't stall I started smiling like a kid 😂
How did he fix it?
@@css172 Apparently thinner oil and after the break-in on the dyno it just went away on its own he said. I'm always curious about break-ins because most people say 500-1000 miles at least and then others just go right to the dyno lol, such as Jimmy haha.
@@css172 the trust bearings were probably too thick and they self clearanced them selves?
@@jordank7685 No, if a bearing "clearanced itself" your engine would be toast.
@@evanlegault2257 me personally i have never really 'broke in' a engine iv built my own engine 4 times pluss 3 friends engines which have all been fine, mine running almost 500hp z20let 2.0 engine, all i do is 50 ish miles on millers breaking in oil change it then let her eat. all my engine failures have been melting pistons due to injectors and map
Jim subtlety flexing on us with 3 s15’s altogether… Proud of you Jim and love watching the progress!! 🤙🏻
its not that subtle lol always got love for jimmy and the s15s every video is just more progression
@@rsadz2358 busting your ass and owning 3 s15’s is definitely a flex. And jimmy deserves every bit of it. Seeing them as a group all together just takes it to the next level
when you think s15 is illegal in US
@@szarak512 when you think s15s aren’t crazy expensive and decently challenging find
right
ha its intresting to see spoon going to work HARD on the e36, Jimmy wanted another hardworking jimmy in the shop but im not sure he was entirely ready for it :) i think once he gets used to having another hard working mechanic in the shop itll be INSANE content comming in the future.
right
Man, Spoon is such a good addition to the gang. Content has been extra fire lately!
It's been the same have you been watching
right
That VVL is some impressive engineering, truly unlocks a whole new level for the SR. Congrats!
right
This makes me so happy to see. I’ve been commenting for years that you need a vvl sr is the pewter s15. You even replied one time saying that Adam would probably have one before you, but here we are haha
Right
I had similar issue w clutch in my S13, we used the bolts to pull the trans together to the engine and it binded on the clutch disc not allowing it to disengage/stall with pressure
Jimmy sitting in the 15 with out a seat and door closed looks like a normal height driver
Had a twin disk crank walk one of the rb’s i built. Check the clutch
Jimmy: VVL
Spoon : The Catfish Vtech
Couldn't have said it any better 😂
Whats up patreon gang !!
Jimmy finally got a Johan!!! Can’t wait to see Jimmy progress as a driver. We need a build series with spoon. Love the energy he has brought to the shop.
Adam followed by jimmy. Perfect lunch break!
Hearing the gate open up then the VVL kickin on is such a heavenly sound 🥹 so stoked for this build it’s been a long time coming for Jim, he deserves it!
Right
I would definitely take the aproach adam did with his 36 with a full strip and blasting and painting the chassis after fabrication is done, gives a very professional look when its done
Spoon is so fitting for the channel. its always nice to see him around
Having spoon in the shop and on the vids is doing things!!!! Spoon and Stevie’s vibe in the shop is top tier, best additions to the channel
I love Steve coming out and double checking it’s good. Seems like such a nice dude. Love him on the channel. Happy for you too on the engine. The bmw is gonna be a ripper.
Jimmy I 100% support the e36 drift car, you have needed an all out drift car for years, don’t try to make it look nice and don’t slam it too much, it’s function over form!
Spoon is wise, Spoon is driven he is focused! He will get you to the summit, you seek Jimmy!
Best sounding car on the channel easily 🔥🔥💯
I love how spoon keeps it real with Jimmy at ALL times, no BS just facts.
Right
S/O spoon for puttin in the work on the beamer.
Spoon is a weapon, keep that man around, he don't sleep!
The exhaust placement is killing me... great car!
Jimmy is like Takumi when his dad puts the new motor in the 86 and finds out he has more rpm range.
F A C T S !
Yo FR!! 😂😂
Said it last video. Send it and self clearance it. You did and it worked. Amazing
Sooo nice seeing Jimmy let someone else who is skilled build a car or work on stuff for him you can see and tell Jimmy is trying and struggling to let other people touch his stuff and we all get it because vwe see how well he builds and cares for everything
I have never seen a better example of "just send it" 😊 stoked for ya Jimmy that thing is perfection. 😍
24:37 watch that flame shoot out the exhaust. Sweet
Yo Jimmy I would love to se you make the shop nice this winter. Some nice storage and finish the office brick wall. Some storage racks and cabinets just make it nice.
One of my favourite 15’s on CZcams by far she’s beautiful
We all love the OG homies ofc ofc. BUT.... Spoon and Stevie are a WHOLE ASS VIBE. Love em
Had to play that 455 Dyno pull back couple times sounds INSANE
Always love these early releases
Spoon is a great addition to the shop
Easiest way to check for metal in your oil, pull dipstick, wipe on napkin, put napkin in micowave
Can’t get over how good that sounds!
Love seeing that add in the intro.
So happy for you that everything worked out
Spoon is such a good addition to the fam!
Yo its crazy how much Jimmy needed “Spoon Oakes”. The content is even more🔥🔥🔥 Stoked for the Fall/Winter content.
Damn I haven’t heard “to the face” in years 🤣
Please don’t ever get rid of any of the 15s😭it’s so cool to see 3 of the same car but in such beautiful and different style of builds
I’m glad your getting spoon out of his dark hole shop hahahahaha. We love having spoon in the videos.
Nicely done
Man, relentless victories in this one. VVL SR? Ready to rip, stall issue improved, even! Spoon mercilessly gutting the BMW? Love to see it. The three S-15s all together. Jimmy should be fuckin' proud of himself and the boys for everything accomplished in this vid.
Great Job Jimmy!!! I can see the smile on your face when it hits the road!!!
So stoked man! 👊🏼 That hits!
We need a full Jimmy O drift livery on the E36!
work of art love the yellow s15 on those Blitz
I like spoon. He’s making a normal videos worth of content just happen in the background.
Jimmy feeding Steve...🔥🔥now that's bros looking after one another....
So stoaked for you jimmy! Loved watching the progress of this build 🙌
Thank you spoon!
Spoon is what this shop needed
love to see so much going on at once! gonna be a busy winter!
Keep the heaterbox in the e36 for when it rains and is cold 🥶 nothing worse than cold feet at a track day and a misted up windscreen on a wet track day . 👌💯🤙 put what you can fit back after the cage 💯🤙
your crews good jim. good job building them up and bringing em all together. SPOON is a fine addition for sure
On my way too Maine for work stayed in Connecticut last night what a pretty state
Congrats Jim!
Jimmy's amazing attention to detail an spoons huge abilities an able to push Jimmy out his comfort zone to make cars more is the stuff we needed
Seeing DJ with that beard, its like seeing Mike Shinoda now...and i cant unsee it..
The e36 was always been in my mind when Jim said that he needed to build a rhd drift car. I just did not expect that he would go full send right out the gate with it. Good on you Jimmy, I can see that you will progress quickly as drifter. You just need to spot getting your nerves hold you back. You can do it kid.
Glad you took the risk. Absolutely love it. Keep it up Jim.
Good job Jimmy 🎉🎉🎉
Waiting on the jimmySmokes channel
Love the content and keep up the amazing work and progress on the channel for all of us to enjoy it.
Yea spoon get my boy right 😂 love the addition
Jimmy is the only man who’s add is just all the boys eating 😂
Jimmy this is definitely some exciting stuff also the 3 15s just sitting pretty next to each other was such a vibe
Good job boys. Love seeing the yellow s15. It’s gonna be so good going down the road.
I'd love to someday have a shop like yours. You're an inspiration James!
Spoon working with you guys is so sick
To keep the shop cleaner throw down some towels and use a table vise clamp to squeeze the oil out of the cut open filter so you see the stuff in it sometimes the “reflection” of oil makes you think somethings gone wrong. Love the content!!
Fitment lookin on point 😍
So happy for you dude, very good vibes in this video 🤝
So glad it worked out
We need a head mounted Spoon cam, and inter-splice his work in with yours.
Congrats on the dyno runs!! Spoon is doing work!
You can see how torn jimmy is with spoon pulling the bmw apart. It’s gotta be done spoon is a quality addition to the crew
24:37 fireball sick
So hyped for this one Jim!
Jimmy when you cut a filter open to check for metal put a section of filter material in the vice and tighten it up to squeeze all the oil out wipe off with a rag and dry filter and can see all metal etc very easy. and no oil going everywhere. and on the s15 so sweet.
Man, you just gotta love spoon at the shop. Just makes things happen & is always good energy
Basicly Spoon is new Johan, but in Jimmy’s world?!😂👏
30 minute vid from jimmy hell ya, keep em coming, much love from Jamaica bro
The Roller Coaster of emotions Jimmy was riding in the vlog! I'm fairly sure everyone watching was sharing them with you in moral support!
Yellow 15, why not throw some 34 GTR wheels on? If not feeling it, throw them on Steve's car for some flare.
Spoon is wise, Spoon is driven he is focused! He will get you to the summit, you seek!
The 36 wide body kit, why not give it some attitude, with a graffitti artist, you've got 4 blank canvases
I believe if you add peroxide to the dry ice it makes it into a slushy mix which works better because of more surface contact.
Everything is great Steve!
Absolutely loving the content. Absolute fire.
Jimmy Oakes S15 king .
glad to see you finally get some good luck
seeing y’all get so happy with VVL is exactly how everyone with a Honda feels when vtec cracks 😂
Spoon cracks me the hell up
White wheels from the blue s15 on the yellow would look amazing
Jimmy, Adam and Tommy Fyeah. Great content to wake up to and spoon is a great addition to the vids, Looking forward to the Fab content
S15 makes some nice power and spoon is killing it on the E36!