Massey Ferguson 35 draft boot replacement
Vložit
- čas přidán 13. 01. 2022
- The draft boot was rotted on my Massey Ferguson 35 and was in need of replacement. This video shows what is involved in removing the draft spring unit and replacing the rubber boot.
#massseyferguson #mf35 #backyardmechanic #vintagetractor #tractorrestoration - Jak na to + styl
Thanks for the video. My 'turnbuckle" had a rubber plug in the threaded end so the rod unthreaded rather easily. 1965 135MF
That was a lucky break. I may just have to add a rubber plug to mine that is an excellent idea.
@@thedelcodave p.# 180982M1
Thanks
Me gustaria saber el precio del Massey Ferguson listo para trabajar en el campo.
What thread is the set screw that is removed at the beginning of the video?
@@mr.goldsilver4649 I am unsure of the thread im sure it's standard possibly 1/4-20 but that's just my best guess
Is your draft control working
OK now?
I think so. I do not have any implements. Is there a way to test it without a plow. 3 point lifts up and down as it should.
@@thedelcodave you can put the draft lever in the position between the dots and the control lever in the fast or slow position. Then give that clevis at the back a good shake and pull, best with a top link on and see it the lift arms come up and down
@@prime553 I'll give that a try
Will water get into the transmission if the boot is gone.?
These tractors share a fluid reservoir with the rear and the gearbox. So if your boot is missing water will get down and contaminate your fluid. The boots on the shifters will leak water directly into your transmission.
Se questa molla non funziona che problemi dà?
If you hit a rock or root with an implement the spring will prevent overload to the hydraulic system.