New Snow Pusher Was Worth Every Penny!!
Vložit
- čas přidán 5. 04. 2023
- Farmchem.com use Larson23 for 5% off your order!
We are a family farm located in west central Minnesota. est. 1918
We enjoy to share our part in agricultural with you and show our followers the ups and downs of farming. I hope you enjoy our videos and please don't forget to subscribe.
Check Out Our Sponsor Agricultural Chemical Solutions-
Ships anywhere in the states check out their chemical prices and join the already 3000 farmers that already get their chemicals there.
If you are a new customer make sure you mention you came from Larson Farms and you will get 5% off your order if your order is more that $5000 you'll get free shipping and a $100 gift card to farmfocused.com for Larson Farms Merchandise!! So give them a chance and see how they can help your farm out!! www.agchemicalsolutions.com/
We would love to welcome a new channel sponsor to our channel check out this link to see how they can help your farm be more profitable!!
Farmer's Keeper: Supercharge your grain marketing.
Grain Pricing Tools. No margin calls. Play the Basis.
Learn more about the most powerful tool in grain hedging:
www.farmerskeeper.com/home
We invite you to check out our website. Where you can find Yankum Ropes, Larson Farms/Big Swede Merchandise, Midland Radios, Links to some of our favorite trusted brands you can find it all on our website.
www.larsonfarmsmn.com/
Want the best phone holder/cupholder for your farm check these out!
cobbriverdesign.com
Want To Send Us A Letter? We Would Love To Hear From You!
Our Address:
Larson Farms
P.O. Box 8
Ortonville Mn, 56278
Business Email-
cslarson@live.com
It's 89 degrees here and my pepper plants are starting to produce. Having a beer while watching you guys play in the snow, thanks for the show.
Was 92 here yesterday and now 60!
@@tango3694 tiz the Texas way in the spring and fall.
@@tango3694 No matter what we arent dealing with snow now...lol Texas is the king.
@@tango3694 Texas Forever :D
Way to rub it in 🤣
For the tire chopping check your shock dampeners if they are shot replace with new ones and that will significantly improve tire wear worked on our RGN/ step deck trailers
Defiantly shockers
The trailer Will for sure need an alignment also. / swedish tire fitter 🤩
Way too much snow me! ! Thank you for sharing.🐂
Cupping means you have a suspension failure/wear-out usually the dampener system (Shocks/struts) or the wheels are significantly out of balance.
Flat Spotting...? spent too much time just sitting without moving?
@@andywilkerson4617 they don’t sit much , a flat spot would me in one place, not all over the tire
Right on buddy
@larsonfarms did you see this response? Seems plausible.
Meh,,,, on an air ride? I don’t think so unless it came off of the lift axle. And he didn’t say that he said it came off a dual. Seems more like it was run low on pressure, or maybe the other tire had more tread.
Always wear that hearing protection! I started wearing hearing aids when I was 52 because I can't hear high pitches anymore and my ears are constantly ringing. I attribute it to too much time on the tractor when I was a kid with no hearing protection, shooting guns, and riding the motorcycle while listening to music on ear buds. Losing your hearing kind of sneaks up on you so when you are young and doing things that make loud noises make sure you are doing something to protect your ears. Once it's gone it never comes back.
Snow Snow. Fun Fun
Brodie is the wash and tire mounting beast!
Good show
You guys are still the best watch on CZcams 🎉🎉
I know Mr. Dougo appreciates y’all young, strapping men able to do the tires!
I haven’t heard Mr. Dougo complain about “The Struggle Bus” lately so Life on Larsons Farm must not be as hectic till that upcoming time of the year! It’s exciting BOYS! I missed ToBy today! Did he get so much attention the other day…he required a day off? Blessings to Everyone @ Larsons Family Farm!
REAL NICE TIRE JOB ON THE TIRES GUYS YOU WILL SLEEP GOOD TONIGHT
Great video. Y’all have to be getting tired of snow. God bless the Larson crew on the upcoming planting and spraying season. Look forward to more videos.
I can't wait to travel. I Want to experience a winter.. 90° Florida winters is NOT winter
Love the videos. I am watching this on April 6th. Looks like another late spring planting season. Rest up guys.
Yep. I’m not a farmer but if I’ve learned anything from Chet and Dougo. We’re looking at 100 to 90 day seed being planted this year. After the snow melts.
thank you very much for the nice video
Norman makes some inverted snow blowers for the 3pt on a tractor. That can help so you can drive forward with a blower on back instead of backwards!. Great video. Can’t wait for planting season
Happy Easter!
Great video guys hang in there. Spring is right around the corner. Around the corner and a couple miles down the road.
thank you
Chopping tyres are usually faulty shock absorbers - well in cars they are, but I am not sure for trucks as I have now experience of trucks. Grat videos. I love the interaction between you guys.
Just think how much fun it will be planting in all that WATER
Always fun
Chet, Great video! I thought we were going to be down one "Big Swede" after he snuck up behind Dougo with that air horn. I bet that new spray trailer is going to be awesome.
I love you guys!!!!
Love the great content keep up the great work
Not missing the snow up here in Upstate NY at ALL! You guys can have it! Forecast for this week 70's-80.
You make snow removal look like fun with those toys.
Chet you guys do a great job and work hard at it. We enjoy every video. Thanks. Happy Easter. 👍❤️🙏
Thanks for another great video. It was interesting and enjoyable.
Changing truck tires is hard work. Not easy at all. Plus is fairly dirty job also.
Eight tires is a lot to do. Good job guys.
Like your snow blade on the payloader. Works really well. Nice.
More stuff ordered for the sprayer trailer. Time to start putting it together.
Thanks for everything Chet.
The Iowa Farm Boy.
Starting the vid with an airhorn? Got a like from me!!
my dog is still running
Earplugs for the shop?? Heck, need air plugs for us viewers.
Love watching the cutting shoot out the deck .
good tips for farming
Lots alot of work...damn !
Great video.
Lol my cousins did road side semi tire changes for years. He did it himself... he also held me up by my ankles at the age of 17... good job boys keep up the good work
Good timing buying them snow attachments.
Videos are only up to Mid-March since crop insurance deadline was the 15th those snow piles got a lot bigger since.
3030 is a short stroke brake chamber and a 3036 is a long stroke. Round fittings are short stroke square is long
dot will put you out of service if you mix the chambers by the different strokes.
That is not correct, a 30/30 brake chamber has rubber diaphragm that are 30 square inches on the service brake and spring brake side of the chamber. A 30/36 is 30 on the service brake side and 36 on the spring brake side. 30/30 and 30/36 chambers come in both standard and long stroke. You can tell a long stroke by the square intake ports, trapezoid tag, or the stamping in the steel.
@@jerrypropst2867 as long as the are the same size ie a type 30 long stroke and short stroke can be mix and matched as long as they are within stroke length limits
We still use the wedge hammer and the 2 3ft homemade bars for all our truck tires. Pretty fancy tool you got there
All that moisture! I hope it sticks around long enough for a bumper crop!
Used to work for jb hunt and when we would take off brake chambers we would put it in steel box that had notches so you could use a torch to cut down the sides and make the safe to throw away. I unfortunately have seen one come apart and crush coworkers hand whole new respect for brake chambers I always cage with bolt
You guys are going to have snow til June!
My back hurts and I'm out of breath just watching you guys.
I pushed snow for over 20yrs in the cities. I hate it and will not do it anymore....LOL. Love the videos!
I stopped by the station along I90 on Good Friday that was under construction when you went to Parkstan to MDS to pick up this snow pusher that Dougo made a issue that it was under construction then you needed fuel...LOL it is now open and they do not ban Dougos so you can bring him back to it now...LOL
Yep we had chains on ours and it did great. When you got it stuck it was stuck.
hard woring boys. nice to see. And having some fun while doing it.
Good day. Thanks for video
Hopefully with all that snow you will have plenty of moisture for planting season this spring.
As someone that uses a pump similar to those pumps, we run centrifuge product pumps on our semis to haul product water from infield tanks up here in Alberta Canada, centrifuge product pumps with a mechanical seal/ bearing on input shaft gets lubricated by water and grease, definitely run grease lines to your bearings, by going with 3 inch plumbing off discharge side will definitely slow down your gal per minute compared to if you go with 4 inch, and we are steal plumbing with a manifold system for off loading and loading, 2 butterfly valves for suction and 2 for discharge, loading is 2 open for suction, 2 closed and other way around so it’s not in a open loop, with a 1 way pto switch, truck rpm set at 800rpm and we can load and offload roughly 3 cubic metres a minute with that set up, when we had to swedge down to 3 inch it’s between 1.5 and 2m3 per minute, so would say if you can go all 4 inch system, and if you have to load from a pond or tank with no head pressure then highly recommend getting a small gear/ booey pump with isolation valves and put it in your system a head of that pump then you can close off once Banjo pump has suction, and not starve and take out banjo pump trying to get suction! Hope that helps and hopefully you guys see the comment
From someone who has seen the changing of the pancakes in the air brake system, if your not sure don’t touch it. Watched my brother take to dish( back half of the air brake chamber) to the chest all because he took the wrong band off. It launched him 20 feet and had a sorry chest for weeks
Same here in Utah it just keeps snowing!!
Awesome video
Best channel on web. Larsons are great entertainment. 🤣
Great stuff guys 👍👍👍👍👍👍
If the wires are green from corrosion soak the end in Lysol toilet bowl cleaner for a few minutes. Rinse with water. Back to bare copper
The difference of the two brake cans is the stroke of push rod. Look at air inlets round or square is what you need to know when buying new ones
AWESOME video.
Semi-industrial chute on your snowblower will improve your fuel economy. Worth looking into.
I don't miss doing semi tires and road call one bit. Truck stop I had worked used same tools you have, tire inflator and tire hammer. They did get tire machine but it was far faster by hand. Haven't done semi tires in 26 yrs you can have all the fun LOL
We started planting corn in Dobson, North Carolina
those 3 boys keep you young Doug
Hey Chet a couple of helpful hints - 1 use soap water mix on your tire beeds to mount and dismount makes things lots easier. Second step down on one side heavily and the rest of the tire will mount better. As for your tire wear, I found on my trailers brake adjustment is what caused that uneven wear hope it helps
Also your air ride suspension might be off just a bit
Or the spacers are warped.
The square boss brake chamber is a !omg stroke and the old one is a short stroke or regular chamber don't miss match them
I always used a flat head screwdriver to pry the last bit of the tire over when the boot wasnt enough, much quicker and easier
as always great stuff god bless
Black wheels and tint win every time! 💪👍🏼
Make or buy a 3 inch to 4 inch coupler that connects right to it we use 6-8 inch ones drag lining manure works no problem
The hydraulic drive water pump will be mounted directly to your boom spray unit and powered by the tractor. Handy if you are going to multiple water sources to fill up.
Spent a summer changing tires every day back in college. Can't say I miss it.
Shocks, check bushings on that side and airbags.
Good video
Shocks!
here in wisconsin it is in the upper 40's and tues it was 61 i like it
U guys should see if u can get a track conversion for the pay loader
Boy that payloader really moves a lot of snow
Chet, your 3" lines will work ONLY IF you ues a 3x3x4 inch tee fitting. The outlet side of the tee to the pump is 4", AND there MUST be a straight section of 4" pipe at least 12 inches between the tee and inlet. And any valves in the inlet side must be "full port" ball valves, and always left fully open when running. (Closed only for maintenance.) If flow regulation is needed, a full port ball valve on the outlet side (depending on pump design) is ok. But check the manufacturer's instructions. Some pumps permit flow control via the inlet.
There can be NO adapters so that tee must be a 3x3x4 cast (or plastic) tee. A 3x3x3 tee with a 3x4 fitting WILL NOT WORK.
I am a former water system operator, and pump theory and proper connections was one of the many mandatory certifications I hold.
Recaps are the ones you see laying in the middle of the highway causing damage to people's vehicles and even causing wrecks
Dougo didn't like that air horn to much. You guys make those tires look easy
I can see Brody and Eric playing demolition derby with those cars in about another year or so.
🚗🙄🫣🚗 Not sure who would win, I'd almost bet Brody would win.
That snow removal looks way to easy with those toys.
Awesome video guys. 🚜🚜🚜
In Grade 8 Social Studies my friend and I were having a V-Dart battle. It's a piece of paper folded up a couple times and then you hold a Rubber Band between your fingers and shoot the paper Dart at each other. The Teacher was bent over and he pretended to pull it back and aim at her...except he accidentally slipped and shot her in the Butt! 😳🤣🤣
yes we should big sweed we should put them rubber bands around the water melon
Great video! Spend the extra money and get a pump with a Honda motor....they last.
The “chopping” or “cupping” is from weak suspension
Absolutely agree
Hey Chet, 3 inch will be fine. You’ll lose some static pressure but nothing serious because you’re literally pulling 5-10ft. Give the pump a minimum of 2 ft of 4 inch pipe so you have fully developed flow going into the pump otherwise it might mess your pump up.
Usually if you have chopping on both sides of an axle it’s caused by shock absorbers. If you are only experiencing chop on one hub it is in most cases because your wheelend is set up incorrectly or the bearings are actually failing. If the wheel bearings aren’t set up with the correct end play the tires on that hub will wear like garbage. Use a dial indicator to set up your end play from 2-10 thousandths. If brand new bearings I always set them up at 2 thousandths and on used bearings I like to set around 4-5 thousandths. That is with both inner and outer nuts tight.
Put centermatic wheel balancers on ,gets rid of the chop
Magnifique vidéo 😊😅
You should put tire goop on help them tires slide on the rim a lot better
were at 126 inches of snow here in duluth 5 inches shy of the snowiest winter ever recored
It's always better to change the whole maximum brake not a good idea to do the diaphrams. Big Springs under a lot of tension.
Central Iowa saw a guy starting field work already
You could put the hydraulic pump on the trailer you use to move the excavator instead of taking the tractor out all the time to lower the trailer
U guys need to check all your spindles too,I had the same problem and turned to be a bent one also..too...
the difference is the 30/36 has a more parking brake pressure is all should have both same on an axle
Hey you all here in Indiana today is April 6th last Friday we got 4 inches of rain rain Saturday rain Sunday rain Monday pretty decent Tuesday rain Wednesday today's pretty decent but we have got the mud have a good one bye
Chet, please make a shirt with a picture of Dugo and the quote “GOD BLESS AMERICA”!!! 11:08 in the video. That is now my response to everything that irritates me!! Love it.. 😂
I am 99% sure that the trailer needs an alignment and maybe some new bushings. Sorry if the grammar sucks i am from sweden and works as a tire fitter 😇
We have a steer axle tire on our dump truck that just wear on one tread line.
We have a liquid fertilizer tank trailer to haul 28% that has a hydraulic pump on it and runs off the trucks hydraulics if your truck is plumbed with hydraulics for a dump trailer or belt trailer!