Tim, I know all to well the work you have put into this, it appeared to be a unattainable goal for far too long, but you persevered and got it done! Kudo's to you and Faster, plus everyone else behind the scenes.
Thanks Tim for pursuing this, so a manufacturer would step to the plate. And thank the manufacturer “ Fastener“ as well. I have just ordered a 2038R, with the third, fourth, and fifth function. I was informed by the dealership that the four port quick connect was not compatible when ordering a third function. So this is coming out just in time for me. I definitely will spend the extra $1000 for the six port quick connect and still be left, wishing that we could put the six ports out the rear as well. But then I consider that being too lazy. Thanks again Tim, and God bless, good looking out for the Consumer.😅
What a great product for those that remove their loaders. Using a single point connector is soooo easy! Tim,that had to be a labor of love for you resulting in a real product improvement for those that can use them. Another example of good collaboration with companies to produce a superior product. Nice job Tim. Blessings.
Tim i have talked to discount hydraulic about the 2038R single point 6 port, they said to contact them at the end of October. Ill let you know when they contact me again. Thank you Tim for pushing for upgrades for us in the compact world!
Wow, Tim this is incredible to see you pull this together. Your influence on the tractor community, not just reviewing existing products, but working to facilitate new products that fill gaps in what the OEMs offer is amazing. No surprise you are the largest compact tractor-based CZcams channel! In regards to future sizes, I would add a vote for a universal kit to add to older tractors. Essentially just the coupler, bring your own hoses/build your own bracket situation (similar to the universal version in the Summit rear remote kits you worked on). I'm sure this will be a lower priority than the 2 series/3 series.
Hey Tim. Since I got a separate mower, I never take my loader off except for the winter change over to snow blower, so I don’t really need one…but I SURE do want one! Thank you for working with all your partners to elevate the “1025” beyond its humble base config. Never thought I’d hot rod my tractor.
Now in stock (version 3) with 8 units available, as I order mine this week. If there is interest on install pics/difficulties I can post if you like . My install will be on a 2025R-X (turbo). Conversely maybe Time wants to make an excursion to Montreal and we can do another install video!! 🙂 Thanks again for your efforts Tim!
@@TractorTimewithTim We just went through a little heat wave for a few days where we were in the low 90s, but as I type this we are at a comfortable 77
Hi Tim I have wanted a 6 port connector for my 2038r Since I purchased my tractor Almost 5 years ago I installed the WR long third function kit on my tractor
Tim, this is great news. I have a 2038R and would be interested in buying a six or even 8 port connector. When I bought my tractor factory 3rd function did not exist so we used 4th funcion via rear remotes to create 3rd function ability. Now that Deere has made factory 3rd function, I have purchased the factory 3rd function and now have two sources of 3rd function. I have value and use from rear hydraulics for continuous flow for a broom and possibly a hydraulic post hole digger via my loader. Thank you Jeremy
Very nice! I would be interested in couple 6 port units for 3R Cab and 3R open station. I have the 2 3046R Cab models and the OOS 3039, that share 2 loaders. Would love to make it a faster easier task to swap the loaders around as needed. I have 6 port units that came on my 5Rs and now that I have experienced using them, I know I would enjoy and find it worth it to get the 3Rs set with 6 port systems.
Well done Tim! I bet 1 out of 5 households in my suburban neighborhood have a compact tractor especially after Covid which speaks to the popularity of your channel. I also like the unbiased opinions you give on any equipment you get your hands on. I also like the small business you partner with. I think this kit should sell well! I just wish there was a kit for my 3x20!) I can’t believe for all the awesome ideas Deere has had with respect to making a compact tractor easier to use ( quick park loader, autoconnect mower, imatch, etc) that this isn’t one of them. I think this should be standard on all R models! (Along with a 3rd function on the loader if you opt for it)
Great vid, thanks! I have a 2023 1025R, so I’ll be ordering my version whenever it becomes available, also just received my Artillian forks and Front how bucket, but with this new 6-port setup you have, I can get the grapple I want.
Hi Tim, it’s Fred Leonard and we have taken receipt of our 2024, 2038 R in the month of May. Yes I definitely will be interested in the six port quick connect because the tractor is already ringed with the third function. The tractor was also ordered with the MSL loader with what I have read so far, I might be ordering the other loader to go along with that tractor. The reason I bring that up, is what to do if I purchased the other loader because then I will need two of the six ports, but only one at the tractor end. Let me know if that can be worked out, and I’m sure that others might be thinking the same way. Unless hydros has a remedy.😊
Congratulations! No need to get the other (NSL) loader. You will find the MSL to be fine. 6 port should be ready any day. …but I have been saying that for several weeks now!!!!
How about a kit for existing four port customers who want to swap out for the connect under pressure fittings? I was one of the first customers, haven’t had the leak issue yet but have always been careful to relieve pressure before connecting.
For the last option for the 2023 and later, it would be nice if there was a shorter hose kit for the top half to go with it. Deere for some reson keep the long hoses on the loader and made a large coil next to the single point faster. That with the coil for the 3rd function hoses makes for a lot of 'junk' in that area.
Would love to see a version for JD 3320. The difficulty in connecting the FEL connections means it’s rare in is remove. Also interested in 4 connection model for rear remotes that run off of FEL diverter
Awesome, now my finance department will be confused why i started working o/t again…. And then just stop until the box arrives. I find it fair, she get the Prime people here daily & i get much more worth while things semi-annually.
Hey Tim... Just spoke to a very nice lady on the sales line at Discount Hydraulic hose. I was inquiring as to when the variant 3 unit would become available, or, if there were any plans to more to production. I am glad you have big shoulders, as they have put the ball back in your court and explained that this was your project. I have a 2025R gen 2 withou any quick connect system, so variant three would be a welcomed addition. I would even pre-order it if that option come available. Would you be able to give an update on this project? Thanks! Kent
Thanks Tim .... so done with connecting 6 hoses every time I remove the loader ..... I pay for it now and take one as it come available!. Thanks for all the hard work you do on our behalf,,,, don't forget to take "Tim" time!
A great upgrade. I upgraded my 1025r to the 4 port version right after your intro video about it. Unfortunately I also blew out one of the seals, however JD replaced it for no charge since it was virtually brand new. I learned too late that they aren’t made to engage under pressure so now I’m very careful about relieving the pressure before engaging. Are those newer “under pressure” cartridges available to upgrade my original 4-port version?
When I first saw the 4 port product, I though it was a cool product, but considered it totally useless for me and for most compact tractor enthusiasts who might want it. The reason I thought this was, I expected most people (not all, but most people) considering this sort of upgrade have probably added two more ports for their grapple, snow blower chute, etc, and they need a 6-port version. I expect there will be more aftermarket demand for this 6-port coupler than for the 4-port version. Will I buy one? I have to admit I'm not sure. If my wife was going to really mow our lawn with the 1025R, then definitely, yes, I would buy one. For me and my personal use.... $1000 US$ is a lot of CDN$. It is $1525 with tax to be accurate. Realistically I will probably wait until something breaks with my individual 4 & 2 port manual couplers. There is one problem that I keep experiencing that this product should fix. That is how my implements keep building pressure whey are not in use. What I believe happens is I take something off in cool weather and try to install it in hot weather. The several 100's of psi or even 1000's of psi that develops makes it impossible to connect the implement without first dealing with the pressure. Often I need to get out my tools and loosen off one coupler on each circuit.
I have a 2038r I added JD third function for a grapple last year and wanted to add quick coupler dealer said it was not compatible with third function. I would be interested with 6 port coupler.
A lot of guys with the Kubota's have been deleting the mult port coupler due to leakage. Mine has never leaked, but I always dump pressure when using the coupler.
Good morning Tim; thanks for your efforts in the tractor world. I appreciate it. I have a JD4066r with third function loader. I would love to have a single point connector on it.👮🏻♂️👍Chip
Hi Tim, we should be taking delivery on 15 May 2024, of a new 2038R, model year 2024. I am definitely going to be interested in the six-point hydraulic quick connect, regardless of the cost, because I included the third function in the build of the tractor. I would be interested in being contacted as soon as the six point is available.
Hi! It appears that the JD 2305 in it's factory state of installed equipment (loader, 62 in belly mower, front mount snow blower and back hoe) that this set up would require very little modification to install the 6 port. I have been toying with the idea of front grapple and thumb for the back hoe. Your thoughts?
I think v3 might work for you. Take a close look at the way the loader mounts to the frame. If same as 1025r…3 bolts on front are shared with the pedestal bracket.
If they've improved, it'd be nice to see them for the Kubota BX/B/LX series tractors. I know Kubota offers them as an option, but I haven't heard good things about them yet.
Hey Tim, Love your channel. Thanks for all the great videos I am highly interested in purchasing a 6 point single hydraulic connector. I have a 2018 JD 2038R With the 220R NSL loader and Summit Hydraulics 4 spool kit w the front 3rd function (from watching your channel!). Has there been any work on getting a 6 point connector for the larger 2Rs, and if so, when could we expect it and can it be connected to the Summit 3rd function kit? Thanks and keep up the great work Rob Van Gorder Binghamton, NY
Exactly. I wouldn't mind finding a way to fab up my own brackets and things. There are just so many brands and models that making model specific brackets for too many of them would get terribly expensive from an RnD perspective
Hey Tim, any update on a possible large frame 2r series 6 port? Would love to be able to convert the mess that is john deeres factory hoses + the factory 3rd function into a single quick connect. I know there's a lot going on in that part of the tractor but it would be such a time and back saver! Would happily pay the 4 figure sum to make my tractor that much more convenient!
Tim, I would love to have a single point connector for the 4066r cab tractor. As of now there is no option for the cabed versions, only for the open station. Would be more than happy to pay 1,000 bucks to not have to deal with the couplers. Also would be more than happy to help with fitment. I have a 2019 model.
Wondering about buying just the coupler, I can see so many uses for this non tractor related that I am very interested. For anyone doubting this technology, faster makes the single point quick connector John Deere has been using since early 2000s on their combines/headers
Tim will they make an easy connection from the hoses on the grapple itself to the diverter on the loader to connect them both as I have the same problem as Christy, arthritis in my hands Thank you
I recommend the power beyond connected front and rear hydraulic kit from summit-hydraulics.com/ttwt Use code ttwt for 5% off. They have front 3rd only, but buying the front and rear together is most bang for buck.
Just an FYI. I purchased a 2038r as my first tractor (probably more tractor than I need but hey) and your videos have been very helpful to this first time tractor owner.
i just wanted to see the position it is in in terms of how close to the side panel, how it mounts to tractor, and how it actually looks compared to the JD version. Does it have the tabs on the ends to protect the coupler the way the JD one does? I couldn’t tell because the bracket in the video is black with Johnny X’s black wrap behind it. Thank you
@@patrickmccaffrey5807position is identical to Deere. Built of welded / fabbed steel rather than cast. It does not have the ‘tabs’, as the extra ports required removing the tabs. It does fit with the cab tractor. The bracket is made by HeavyHitch.com, so powder coated, wonderful quality.
Hi Tim, I just bought version 1 from DHH because they don’t even show version 3 on their website anymore. Do you know of anywhere else I can buy the Heavy Hitch pedestal so that I can set this up myself?
So maybe I missed this but if I order this 6 point upgrade for my 1025R how do I connect my snowblower this winter? Do I need another adapter for the snow blower or do I just plug the snow blower into the 6 point manually and then if I do that, do I need to change the ends of the hoses to the under pressure ends........so many questions......... Thanks gang
Do you have existing 4 port? If so, you can use the implement half of that to connect to the six port tractor side. If you do not have existing 4 port, you have 2 choices: 1) get flat face couplers for snow blower to connect to the single point directly 2) continue to use the 4 individual mid couplers as usual. Just unplug the lines running to the new single point connector.
I’m looking forward to seeing this available for my 2038R and thank you for all of your efforts to help make this possible. As a side note, do you have any points of contact at Discount Hydraulic Hose? I ordered the power beyond extension hoses kit almost 2 months ago (12 Aug 2023) and was charged for it the same day, but my order is still pending… I’ve tried reaching out to them several times, but can’t seem to get to a real person. I submitted an online status update ticket on 11 Aug 2023 and have not received any response on that either. Should I be worried? I know they are or were moving to a new location and I’m sure that causing chaos, but I sure would like to get my order. Thanks in advance for any assistance or advice you can provide.
I’ll see what I can do. Indeed, they had significant issues due to the move. The orders placed right during the move …such as yours…are the ones delayed.
@@TractorTimewithTim thank you very much. Knowing that you have partnered with them brings a lot of credibility to them for someone like me that doesn’t have any real insight on trustworthy companies. I also know that moving can cause all kinds of problems and I’m sure they are working through these issues as fast as possible and that’s likely causing the communication issues. I’m not going to hold this against them as I’m sure they are doing the best they can, but I do want my order through.
Tim just bought my 6 point connector. Had the 4 point connector already. Is it possible to use the 4 point connector at the front of loader and make it a two point connector.. Tie it down with wire ties and use the other end on my grapple.
Couple questions Tim, my John Deere dealer lost his dealership. I still have my 1025r. Should I be concerned?? Also can the 1025r pull a 5ft box blade?? Thanks and keep up the good work 👍.... 👍
I have the 4 port quick connection on two 1025r. but I have seen a brush guard on your tractor with small holes in it. Where can I get the guard for my tractors
If you know you will not need 6 ports (3rd function for grapple) in the future, order BXX10283 from GreenPartStore.com use code TTWT for free shipping.
Well, looks like JD stole Kubota's thunder with their quick connect multicoupler. Curious what JD's setup costs. A couple years ago I tracked down the mfg who supplies Kubota with theirs, I think it was Parker, thinking to buy one to install on my Massey GC...cost on it was around $1k.
So these couplers are not pioneer but more like the flat couplers typically found on skid steers and other types of construction equipment? I have been told that flat couplers can connect under pressure and they are much easier to connect than pioneer couplers. 🤔🤔
@TractorTimewithTim Yes, it is very interesting. I have a 3560 Grand L with 8 ports because we have the hydraulic SSQA, which we love, by the way. Someone makes one for our tractor, but the dealer discouraged it because they said people who had them on their tractor had issues getting them to reattach. Plus, we really haven't seen the need to take the loader off after owning it for about 18 months. I still like the concept on smaller tractors than ours.
Tim, I know all to well the work you have put into this, it appeared to be a unattainable goal for far too long, but you persevered and got it done! Kudo's to you and Faster, plus everyone else behind the scenes.
Tim. Did you ever envision this channel going to this level? Just wow. Actually changing manufactures and advoacy on a whole new level! Keep it up!
No idea. Honored to be a part of the community!
Thanks Tim for pursuing this, so a manufacturer would step to the plate. And thank the manufacturer “ Fastener“ as well. I have just ordered a 2038R, with the third, fourth, and fifth function. I was informed by the dealership that the four port quick connect was not compatible when ordering a third function. So this is coming out just in time for me. I definitely will spend the extra $1000 for the six port quick connect and still be left, wishing that we could put the six ports out the rear as well. But then I consider that being too lazy. Thanks again Tim, and God bless, good looking out for the Consumer.😅
And yes Tim, I’d be totally willing to pay the price you quoted for the 6 point multiFaster for the 2038R! Thanks again!
Rob VG
Working on it. Not sure of delivery time
Yup another 2038R!! Price is fine
What a great product for those that remove their loaders. Using a single point connector is soooo easy! Tim,that had to be a labor of love for you resulting in a real product improvement for those that can use them. Another example of good collaboration with companies to produce a superior product. Nice job Tim. Blessings.
Tim i have talked to discount hydraulic about the 2038R single point 6 port, they said to contact them at the end of October. Ill let you know when they contact me again. Thank you Tim for pushing for upgrades for us in the compact world!
Well did they ever get back to you? I could use one as well.
@@user-uu5lj3yb4w they said release is gonna be May/ June. I haven't checked in recently
Wow, Tim this is incredible to see you pull this together. Your influence on the tractor community, not just reviewing existing products, but working to facilitate new products that fill gaps in what the OEMs offer is amazing. No surprise you are the largest compact tractor-based CZcams channel!
In regards to future sizes, I would add a vote for a universal kit to add to older tractors. Essentially just the coupler, bring your own hoses/build your own bracket situation (similar to the universal version in the Summit rear remote kits you worked on). I'm sure this will be a lower priority than the 2 series/3 series.
Hey Tim. Since I got a separate mower, I never take my loader off except for the winter change over to snow blower, so I don’t really need one…but I SURE do want one! Thank you for working with all your partners to elevate the “1025” beyond its humble base config. Never thought I’d hot rod my tractor.
Love it. How about an install video on the 6 port single point connector?
Definitely want one for my 2038r that works with the Artillian 3rd function kit
Your artillian kit is on the loader, right? So you only need 4 ports?
You’re right, I jus got excited and had a brain fart 😂
Now in stock (version 3) with 8 units available, as I order mine this week. If there is interest on install pics/difficulties I can post if you like . My install will be on a 2025R-X (turbo). Conversely maybe Time wants to make an excursion to Montreal and we can do another install video!! 🙂
Thanks again for your efforts Tim!
That would be fun. Is it cooler up there?
@@TractorTimewithTim We just went through a little heat wave for a few days where we were in the low 90s, but as I type this we are at a comfortable 77
I see I am not the only person who sees the marvelous impact you and the Mrs have had on the tractor world. You two do make it fun!
Thanks for the incredibly kind words!
The 6 port single point option for my 1025R would be awesome! I can't wait until this is available for my 2023.
That's awesome! We have larger tractors, love the idea. Never have taken the loaders off a tractor, they get used all the time. Fantastic idea!
Hi Tim I have wanted a 6 port connector for my 2038r Since I purchased my tractor Almost 5 years ago I installed the WR long third function kit on my tractor
Tim, this is great news. I have a 2038R and would be interested in buying a six or even 8 port connector. When I bought my tractor factory 3rd function did not exist so we used 4th funcion via rear remotes to create 3rd function ability. Now that Deere has made factory 3rd function, I have purchased the factory 3rd function and now have two sources of 3rd function. I have value and use from rear hydraulics for continuous flow for a broom and possibly a hydraulic post hole digger via my loader.
Thank you
Jeremy
Very nice!
I would be interested in couple 6 port units for 3R Cab and 3R open station.
I have the 2 3046R Cab models and the OOS 3039, that share 2 loaders.
Would love to make it a faster easier task to swap the loaders around as needed.
I have 6 port units that came on my 5Rs and now that I have experienced using them, I know I would enjoy and find it worth it to get the 3Rs set with 6 port systems.
Also interested for a 3R cab with 3rd function...
Well done Tim!
I bet 1 out of 5 households in my suburban neighborhood have a compact tractor especially after Covid which speaks to the popularity of your channel. I also like the unbiased opinions you give on any equipment you get your hands on. I also like the small business you partner with. I think this kit should sell well! I just wish there was a kit for my 3x20!) I can’t believe for all the awesome ideas Deere has had with respect to making a compact tractor easier to use ( quick park loader, autoconnect mower, imatch, etc) that this isn’t one of them. I think this should be standard on all R models! (Along with a 3rd function on the loader if you opt for it)
We’ll work on it!
well there is some pressure on the extending cylinder on loader side
Love your channel!! Have watched for years. I have a 2021 3039R with Cab. I would love to see this product for my tractor.
Yes, I would buy one of the 6 ports for the 2038R!!
Should become available in the next week or two.
There is a similar multi coupler on the Avant machines, makes it so much easier to connect the hoses. Great video once again 👍
Great vid, thanks! I have a 2023 1025R, so I’ll be ordering my version whenever it becomes available, also just received my Artillian forks and Front how bucket, but with this new 6-port setup you have, I can get the grapple I want.
Hi Tim, it’s Fred Leonard and we have taken receipt of our 2024, 2038 R in the month of May. Yes I definitely will be interested in the six port quick connect because the tractor is already ringed with the third function. The tractor was also ordered with the MSL loader with what I have read so far, I might be ordering the other loader to go along with that tractor. The reason I bring that up, is what to do if I purchased the other loader because then I will need two of the six ports, but only one at the tractor end. Let me know if that can be worked out, and I’m sure that others might be thinking the same way. Unless hydros has a remedy.😊
Congratulations!
No need to get the other (NSL) loader. You will find the MSL to be fine.
6 port should be ready any day. …but I have been saying that for several weeks now!!!!
I'd love to have it for my 3033r
How about a kit for existing four port customers who want to swap out for the connect under pressure fittings? I was one of the first customers, haven’t had the leak issue yet but have always been careful to relieve pressure before connecting.
Love to see it for the 2038R
Working on it.
Love a set for my JD3046R cab model with 3rd function.
I got a new Holland workmaster 70 and I take the loader on and off every time I do hay and this would make it so nice
Cant wait for the 2 series version!
2032/2038?
2038R
2038R owner here. I would love to have this great product. Please include us.
I have a 3033r and I would definitely pay for a 6 port for it.
2021 John Deere 2038R!
Great video. I don’t have a tractor that could use that system, but it’s a great idea.
Have a great day.
Would like to see one for the Gen II 2032R & 2032R
For the last option for the 2023 and later, it would be nice if there was a shorter hose kit for the top half to go with it. Deere for some reson keep the long hoses on the loader and made a large coil next to the single point faster. That with the coil for the 3rd function hoses makes for a lot of 'junk' in that area.
Eagerly waiting for the 2023 2025R hard line version. I love my 4 port but since day 1 I always wished it was a 6 for my 3rd function.
Would love to see a version for JD 3320. The difficulty in connecting the FEL connections means it’s rare in is remove. Also interested in 4 connection model for rear remotes that run off of FEL diverter
Awesome, now my finance department will be confused why i started working o/t again…. And then just stop until the box arrives. I find it fair, she get the Prime people here daily & i get much more worth while things semi-annually.
Sounds like you have a plan!
Love it. Would love to see. 3046R kit for cab! Lol
Hey Tim... Just spoke to a very nice lady on the sales line at Discount Hydraulic hose. I was inquiring as to when the variant 3 unit would become available, or, if there were any plans to more to production. I am glad you have big shoulders, as they have put the ball back in your court and explained that this was your project. I have a 2025R gen 2 withou any quick connect system, so variant three would be a welcomed addition. I would even pre-order it if that option come available. Would you be able to give an update on this project?
Thanks!
Kent
Thanks Tim .... so done with connecting 6 hoses every time I remove the loader ..... I pay for it now and take one as it come available!. Thanks for all the hard work you do on our behalf,,,, don't forget to take "Tim" time!
I have a 3033r and a 3046r. I would buy 2.
Love the channel, I’ve been watching since the chocolate cake episode.
Ha! Chocolate Cake! That was a LONG time ago!
I could use one on my 4066!
A great upgrade. I upgraded my 1025r to the 4 port version right after your intro video about it. Unfortunately I also blew out one of the seals, however JD replaced it for no charge since it was virtually brand new. I learned too late that they aren’t made to engage under pressure so now I’m very careful about relieving the pressure before engaging.
Are those newer “under pressure” cartridges available to upgrade my original 4-port version?
When I first saw the 4 port product, I though it was a cool product, but considered it totally useless for me and for most compact tractor enthusiasts who might want it.
The reason I thought this was, I expected most people (not all, but most people) considering this sort of upgrade have probably added two more ports for their grapple, snow blower chute, etc, and they need a 6-port version.
I expect there will be more aftermarket demand for this 6-port coupler than for the 4-port version.
Will I buy one? I have to admit I'm not sure. If my wife was going to really mow our lawn with the 1025R, then definitely, yes, I would buy one.
For me and my personal use.... $1000 US$ is a lot of CDN$. It is $1525 with tax to be accurate.
Realistically I will probably wait until something breaks with my individual 4 & 2 port manual couplers.
There is one problem that I keep experiencing that this product should fix. That is how my implements keep building pressure whey are not in use. What I believe happens is I take something off in cool weather and try to install it in hot weather. The several 100's of psi or even 1000's of psi that develops makes it impossible to connect the implement without first dealing with the pressure. Often I need to get out my tools and loosen off one coupler on each circuit.
A bit less than $1000 us…especially with code TTWT.
Would love to see this for the 4 series. I would get one right away. 4066R
I have a 2038r I added JD third function for a grapple last year and wanted to add quick coupler dealer said it was not compatible with third function. I would be interested with 6 port coupler.
Ok. As you saw from the video, we are close!
A lot of guys with the Kubota's have been deleting the mult port coupler due to leakage. Mine has never leaked, but I always dump pressure when using the coupler.
Yep. The Kubota version is notoriously leaky. The Deere (FASTER) version is much better.
Still, dumping the pressure is wise.
Good morning Tim; thanks for your efforts in the tractor world. I appreciate it. I have a JD4066r with third function loader. I would love to have a single point connector on it.👮🏻♂️👍Chip
I would love one for my 4066r no cab also!!
Hi Tim, we should be taking delivery on 15 May 2024, of a new 2038R, model year 2024. I am definitely going to be interested in the six-point hydraulic quick connect, regardless of the cost, because I included the third function in the build of the tractor. I would be interested in being contacted as soon as the six point is available.
It should be available any day.
I'm also waiting, to install on my 2019 1025R. I'm 70 and my wrist is not as used to be, fighting with those couplers is not a fun thing.
I have Kubota LX2610 and would love the 6 port upgrade.
it is IMPERATIVE this is developed for the large 2R!!!!!!!!!!!!!!!!
Do you think in 5 years, this will turn into an eponym. It would have to be “the tim”, I think “ the marks system “ might still have too much baggage.
We have a cat that looks just like your new one. Her name is Chole. You can name yours Chole too if you want.
Hi! It appears that the JD 2305 in it's factory state of installed equipment (loader, 62 in belly mower, front mount snow blower and back hoe) that this set up would require very little modification to install the 6 port. I have been toying with the idea of front grapple and thumb for the back hoe. Your thoughts?
I think v3 might work for you. Take a close look at the way the loader mounts to the frame. If same as 1025r…3 bolts on front are shared with the pedestal bracket.
Definitely would like any solution on 4series cab JD. I have to remove the loader quite often and I do not look forward to doing it anytime.
When is the 4052R six port kit available?
Hey Tim, I'd like to see a 4 or 6pt for a 3039R with cab. Thanks!!
2:30 you just name your cat 💁♂️ climber 😊👌
If they've improved, it'd be nice to see them for the Kubota BX/B/LX series tractors. I know Kubota offers them as an option, but I haven't heard good things about them yet.
Correct. The Parker made system on the BX etc has not proven very reliable.
@@TractorTimewithTim Do you still have your Kubota LX haven't seen it in awhile? thanks
I love the quick connect on my Kubota BX23S, haven't had any issues. Would love a 6 port option
Hey Tim,
Love your channel. Thanks for all the great videos
I am highly interested in purchasing a 6 point single hydraulic connector. I have a 2018 JD 2038R With the 220R NSL loader and Summit Hydraulics 4 spool kit w the front 3rd function (from watching your channel!). Has there been any work on getting a 6 point connector for the larger 2Rs, and if so, when could we expect it and can it be connected to the Summit 3rd function kit? Thanks and keep up the great work
Rob Van Gorder
Binghamton, NY
How about a universal kit or just the six multi port connector, to use on older tractors?
Exactly. 2 New Hollands here.
Exactly. I wouldn't mind finding a way to fab up my own brackets and things. There are just so many brands and models that making model specific brackets for too many of them would get terribly expensive from an RnD perspective
Hey Tim, any update on a possible large frame 2r series 6 port? Would love to be able to convert the mess that is john deeres factory hoses + the factory 3rd function into a single quick connect. I know there's a lot going on in that part of the tractor but it would be such a time and back saver! Would happily pay the 4 figure sum to make my tractor that much more convenient!
16 weeks from now!
Tim, I would love to have a single point connector for the 4066r cab tractor. As of now there is no option for the cabed versions, only for the open station. Would be more than happy to pay 1,000 bucks to not have to deal with the couplers. Also would be more than happy to help with fitment. I have a 2019 model.
I’d like to see one for the Kubota BX2680
Wondering about buying just the coupler, I can see so many uses for this non tractor related that I am very interested.
For anyone doubting this technology, faster makes the single point quick connector John Deere has been using since early 2000s on their combines/headers
We’ll work on that.
What uses? Curious. I love to Jerry Rig things. What kind of things r going thru ur head?
Tim will they make an easy connection from the hoses on the grapple itself to the diverter on the loader to connect them both as I have the same problem as Christy, arthritis in my hands Thank you
I would buy the 6 port connector for a 4 series cab. Where or how to mount it would be the difficult part.
Yes. Space is premium…especially on the cab tractors.
Hi Tim dose discount hydraulics ship to Australia
I'd be interested in a 6 port kit for a Kubota B2650 with Cab
This was a great video. I have some questions on the single point connector for my 2025R and 1026R. Would I be able to talk to you about it?
It’ll work on 1026r. Get variation #3.
Tim I would like a 4 port for a Yanmar YT347/YT359
Tim , which 3rd function kit do you recommend for a 2021 1025R? I will be installing it myself.
I recommend the power beyond connected front and rear hydraulic kit from summit-hydraulics.com/ttwt
Use code ttwt for 5% off.
They have front 3rd only, but buying the front and rear together is most bang for buck.
I would love a 6 port for my 3039R cab tractor
Nice I like that 👌.
What other tractors will that work on and is there bigger version for full size tractors?
Keep watching. We asked for your feedback.
I have a 2022 3046r open station like Tim’s and would love to purchase a 6 port kit for it.
Please make for 2038r! Will pay the cost you discussed. Any updated news on this?
Hopefully this week or next week
Just an FYI. I purchased a 2038r as my first tractor (probably more tractor than I need but hey) and your videos have been very helpful to this first time tractor owner.
I haven’t been able to find this for the 2038r. Any update?
Sorry just found it and purchased
Would love a 6 port on a 3720
Still no update on the 2023+ newer?
If you have the 4 port factory installed with hardlines up to it…we have no solution.
The Discount Hydraulics 6 hose connector does not include the storage bracket. Does anyone sell the bracket? What is the part number? Thanks
Shoot! Forgot that! Had so much trouble getting the rest of the parts together!
Hey Tim, can we get some pics of the new HH bracket that holds the six port coupler? Can’t really see it in the video
Not sure I have much better. What is your concern?
i just wanted to see the position it is in in terms of how close to the side panel, how it mounts to tractor, and how it actually looks compared to the JD version. Does it have the tabs on the ends to protect the coupler the way the JD one does? I couldn’t tell because the bracket in the video is black with Johnny X’s black wrap behind it. Thank you
@@patrickmccaffrey5807position is identical to Deere.
Built of welded / fabbed steel rather than cast.
It does not have the ‘tabs’, as the extra ports required removing the tabs.
It does fit with the cab tractor.
The bracket is made by HeavyHitch.com, so powder coated, wonderful quality.
Thanks for the quick reply Tim, and thanks for putting this kit together!
Hi Tim, I just bought version 1 from DHH because they don’t even show version 3 on their website anymore. Do you know of anywhere else I can buy the Heavy Hitch pedestal so that I can set this up myself?
Is there a version of a 4 port quick connect for a 4066R/M with a 440R loader?
I would love to see if for John Deere 3320
Sign me up for the 2R connector. Yes I’d pay the $900
So maybe I missed this but if I order this 6 point upgrade for my 1025R how do I connect my snowblower this winter? Do I need another adapter for the snow blower or do I just plug the snow blower into the 6 point manually and then if I do that, do I need to change the ends of the hoses to the under pressure ends........so many questions......... Thanks gang
Do you have existing 4 port? If so, you can use the implement half of that to connect to the six port tractor side.
If you do not have existing 4 port, you have 2 choices:
1) get flat face couplers for snow blower to connect to the single point directly
2) continue to use the 4 individual mid couplers as usual. Just unplug the lines running to the new single point connector.
I do not have the older version, so thank you so much for your input! Take care, keep up the great work we appreciate you!
It would be nice on a massy gc 1725
I’m looking forward to seeing this available for my 2038R and thank you for all of your efforts to help make this possible. As a side note, do you have any points of contact at Discount Hydraulic Hose? I ordered the power beyond extension hoses kit almost 2 months ago (12 Aug 2023) and was charged for it the same day, but my order is still pending… I’ve tried reaching out to them several times, but can’t seem to get to a real person. I submitted an online status update ticket on 11 Aug 2023 and have not received any response on that either. Should I be worried? I know they are or were moving to a new location and I’m sure that causing chaos, but I sure would like to get my order. Thanks in advance for any assistance or advice you can provide.
I’ll see what I can do.
Indeed, they had significant issues due to the move. The orders placed right during the move …such as yours…are the ones delayed.
@@TractorTimewithTim thank you very much. Knowing that you have partnered with them brings a lot of credibility to them for someone like me that doesn’t have any real insight on trustworthy companies. I also know that moving can cause all kinds of problems and I’m sure they are working through these issues as fast as possible and that’s likely causing the communication issues. I’m not going to hold this against them as I’m sure they are doing the best they can, but I do want my order through.
@@ibwaldo they need to contact you to verify credit card. Hopefully they will get in touch.
@@TractorTimewithTimthey did reach out to me and my order is on the way, thanks again for your help 👍
Wanting to add third to my 3038E 2015 model any suggestions
Well, do you remove your loader from the 3e? I didn’t think the 3e had a removable loader.
Tim just bought my 6 point connector. Had the 4 point connector already. Is it possible to use the 4 point connector at the front of loader and make it a two point connector.. Tie it down with wire ties and use the other end on my grapple.
Yes. You can do that.
Couple questions Tim, my John Deere dealer lost his dealership. I still have my 1025r. Should I be concerned?? Also can the 1025r pull a 5ft box blade?? Thanks and keep up the good work 👍.... 👍
No concern at all. Get to know the service dept at the next closest dealer.
We show 5 ft box on 1025r. Works.
I use a 6' box blade on a 1025. It's worked really well so far.
Will this work on 1025R with Mauser cab?
Yes.
I have the 4 port quick connection on two 1025r. but I have seen a brush guard on your tractor with small holes in it. Where can I get the guard for my tractors
5elevendesignz.com use code TTWT.
What about the 3320 model
We don’t have a bracket for it yet.
#ISupportTTwT!!!
I missed the years that a 4 port can work, I have a 2017 1025R with 4 hoses and routinely remove the loader. Is an upgraded 4 hose available?
If you know you will not need 6 ports (3rd function for grapple) in the future, order BXX10283 from GreenPartStore.com use code TTWT for free shipping.
Well, looks like JD stole Kubota's thunder with their quick connect multicoupler. Curious what JD's setup costs. A couple years ago I tracked down the mfg who supplies Kubota with theirs, I think it was Parker, thinking to buy one to install on my Massey GC...cost on it was around $1k.
I woildn’t say ‘JD’ in this case. We worked directly with FASTER to get this to market.
Oh nice!
So these couplers are not pioneer but more like the flat couplers typically found on skid steers and other types of construction equipment? I have been told that flat couplers can connect under pressure and they are much easier to connect than pioneer couplers. 🤔🤔
Yes. Keep watching.
@TractorTimewithTim Yes, it is very interesting. I have a 3560 Grand L with 8 ports because we have the hydraulic SSQA, which we love, by the way. Someone makes one for our tractor, but the dealer discouraged it because they said people who had them on their tractor had issues getting them to reattach. Plus, we really haven't seen the need to take the loader off after owning it for about 18 months. I still like the concept on smaller tractors than ours.
Will this work on a 2022 JD 2025?
Yes.variation 3.
@@TractorTimewithTim Thanks
Lol your pause should have been bigger between the 900 and thousand... sounded like 900,000... lol pay for Tim's new place at... haha
Ha! Yea. Noticed that. Did we just get a commitment from you? :-).