Fully restoration American antique C&J lathe | Restore and repair old carroll & jamieson lathes
Vložit
- čas přidán 23. 07. 2022
- antique carroll & jamieson lathe from the US, we found and bought from a mechanical workshop in vietnam. this carroll & jamieson lathe is American made in 1925 up to now this lathe is almost 100 years old. the machine has completely rusted and many things are not complete but we still bought this lathe to restore.I hope you find something useful from this video!
Fully restoration American antique C&J lathe | Restore and repair old carroll & jamieson lathes
I am very happy to receive your feedback, advice and suggestions to improve myself more and more
!!! I apologize for the mistake if I did in this restore!!! Thank you for watching the video have a good day. Don't forget to like and subscribe to the channel
Link subscriber
/ restorationittool
Link facebook
profile.php?...
Link twitter
/ mrthao18
#restoration #restore #lathe - Věda a technologie
Из всех видов ремонта главным для нас является покраска...
А Саундтрек - вообще шедевр!
Г - геометрия и Т - точность, ну и крашеный патрон это просто прелестно ))))
Причем, покрасил как бык посрал...в России это называется "предпродажная подготовка"...
@@MrSlDemon, он ещё и Лимбы все закрасил! Это вообще эпик!😂
Просмотры - вот что главное
ну что, красиво "отремонтировал". для них сойдёт, в ихнем климате даже солярка покрывается плесенью. как это насекомые не сожрали изоляцию на электропроводах. ну а "точность" для них понятие растяжимое. главное крутится и гудит.
Да, на ремонт не похоже. Но и у нас не лучше.
Осталось покрасить кулачки в разные цвета.
@@user-zh3pz7jw6k ну да, в триколор, что бы все знали.)))
Ничего вы не понимаете, станок явно под открытым небом работал. Этот старичок с другой стороны, нормальная точность изготовления при такой станине. И особой сложности в нем я не увидел. У меня есть станок 70-х, так извиняйте, на нем вариатор есть.
Да и главное покрашено!🤣
I live in the USA, in the State of Indiana. This lathe was built just 1 hour drive from my house 😉
Молодец
This is clearly not a rebuild. Just a clean up and repaint. The motor was not rewound, clearances, straightness was not checked. I understand it's all about financial allowances but this should be considered a clean up not a rebuild.
@@dankeabend8778 Sdebn njl2≈
I live in Indiana as well. South central Indiana that is and I sure wish I knew where this lathe was cuz I sure would have snatched it up and actually restored it.
@@chrisprice4420 there is zero reason to rewind a motor if the coils are in good shape.
you only do that if there are shorts or breaks in the coil windings or if the motor doesn't work anymore.
re-using the old bearings and all the quite funky looking electronics though...
he should have definitely replaced those.
Cool to see young guys in Vietnam doing the same stuff we Americans do with these old machines. I am sure it will last another hundred years.
Idid a 16by6 years ago took a long time
Вы тоже только красите машины, и не меняете поршневые кольца, подшипники, не притираете клапаны, не меняете ремни?
Когда коту делать нечего, он яйца лижет. Когда псевдореставраторам делать нечего, они станки реставрируют. Ценность станка не в его красоте и блеске, а возможность делать работу, с той точностью, какая у него должна быть от завода производителя. И ни один псевдореставратор не шабрит направляющие, не меняет овальные втулки, и вообще не использует какой либо измерительный инструмент при реставрации. Плохая работа.
Тоже об этом подумал, красивокрашен!
Поддерживаю
@Aleksey Ekimenko это не дерьмо, а требование при кап.ремонте станка!
О, нашел грамотный комментарий. это не реставрация, а хз что.
Он вообще-то не реставратор , а блогер в первую очередь , ему нужен контент , не важно какой , возможно в следующем ролике увидим как мамонта восстановит или СССР
Опять помыть-покрасить,называется полная реставрация?
А как на счет всех трущихся частей,износ подшипников и шестерен?
ну зачем же!?? А как же стук? 🤣
это говно станок похоже для третьих стран в нём 2 подшипника и то в электромоторе
@@user-td9lk2sw4g Прикол ещё в том,что станок перекрасили только снаруже, а унитри станины и тумбы - красить не стали. Да поповоду поджипников - действительно забавно, например коробка передачь без единого подшипника - собрана вся на бронзовых втулках, а нет один конусно-роликовый подшипник ,всё так и засветился. Почему-то никому в голову не пришло что можно расточить посадочные места под нормальные подшипники. Но если посмотреть под другим углом- то даже такой станок лучше чем наличие никакого станка. И патрон совсем не нужно было красить, его достаточно было почистить и смазать.
Негода уже посмотрел этот видос? У него глаза на лоб полезут от такого "восстановления")
это точно. там шабрить не перешабрить, Негоде и года б не хватило 😂😂😂
Before putting all this effort into a cosmetic restoration, I would have got a competent lathe engineer to check how much wear there is in the main bed, using something like a Taylor Hobson Optical flatness gauge. If the bed, as is likely has severe wear patches, then, if it is going to be a user lathe, it would need to be reground prior to reassembly. If however it is only for a museum exhibit then the cosmetic restoration is just fine. Good job!
Unfortunately i can give u only one thumb up. Thanks to you this machine will be saved for the next generations to come. These machines are built to last forever. It was a pleasure to watch this video and i admire your skills. Thank you! 👍👏👏
Реставрация - покрасить станок везде. Охуительно. Великолепно.
Еще помыл почистил, с моющим средством помыл кстати. Не очень понятно правда, зачем он нониусы все закрасил и часть резьбы, но хозяин барин теперь стоит радует.
@@alexkurzin мойка - это подготовка к покраске :)
@@nalunyaninmoto426 вы переоцениваете таланты некоторых пользователей станков, они могут покрасить и без мойки
Ну я бы не назвал это рестоврацией, просто разобрал помыл и покрасил. Да же патрон покрасил)) человек просто снимает видео ради видео. Он так зарабатывает деньги.
@@gabrielmake8804 так о том и речь. Почему то всё любят смотреть как папуасы мастерят что то.
I never comment on CZcams, but this time I had to. I own the exact same lathe, use it all the time. My shop is 15 minutes from worcester mass, and I’m glad your restoring this extremely powerful lathe.
Does yours run this rough?
Oh hell no. Mines tip top. Barely any runout
This is the same lathe I ran with my first job as a machinist apprentice 40 years ago. Properly restored, that thing will probably be more precise and outlast any manual engine lathe in modern production.
@@EngineEngineer are you saying this one is not going to Space X anytime soon?
they cleaned this lathe and repainted it , thats NOT a restored lathe . I didn't see not one new seal bearing or any scraping take place .
20:41 двигатель явно сгоревший, на некоторых проводах даже лак облупился. И когда он крышку шлифовал 15:51 на ней были видны следы копоти.
replacement parts are a problem, but a lathe is one of the only machine tools that can build itself. so you usually end up using the broken machine to make parts to fix the broken machine. Many have done this. Great job on the restore.
думал что реставрацию полностью сделают, заменят обмотку движка, поставят клеммы на провода обжимные, и так далее ) а так это чисто покрасить и сделать вид как новый (
А потом на продажу, типа не бит, не крашен, точила бабушка раз в десятилетие😁
@@user-jg7uv7sp2m У наших учатся. Это они еще продаванов-колонистов не смотрели.)))
Нууу я всегда думал что у станка реставрация это в первую очередь замена всех подшипников, на высокий класс точности и шабрение направляющих под индикатор, плюс установка системы СОЖ и доработка масляной системы, и замена всех износившихся деталей, а уж потом замена проводки!😁
@@Dmitriy_IV с таким подходом, ты станок не продашь.)))
@@Dmitriy_IV
Все шестерни выглядят как новые! ЭТО УДИВИТЕЛЬНО.
Ничего удивительного нет. Нет токарей-сэлян, только от свинарника, за длинным рублем. нет Плана, с перевыполнением, нет трехсменной нагрузки, Ну и у обслуги, не парк из 70-ти станков на одного слесаря, а наверно всё же слесарь на десять единиц техники. Да и масленщица наверно была, да и график ППР соблюдался. Ну и сама культура производства. Сейчас конечно, в период одноразовости, совсем подругому.
Открою большой секрет, у 50 летнего станка отработавшего по две смены в день, тоже шестерни выглядят как новые.
Как передачи переключаются, просто загляденье. Гитара с шестеренками с переключением передач тоже круто. Правда кажется что там возможно все подачи может оказаться только на дюймовые резьбы. Не удивлюсь если таком станке еще будет малый ход чтоб резьбы плашками резать. Хорошая техника времен войны во Вьетнаме.
Самое главное не сделано- геометрия направляющих не восстановлена. зато все улили краской. Зачем красить патрон и штурвалы, ручки? Такое впечатление, что готовят для продажи в расчете на глупого покупателя
@@user-tp4zk1df4v ну хайпа не будет, не порть малину. Шабрить поверхности нужен инструмент, точные и правильные замеры, поверочные линейки. Если к тебе пришел бесплатно станок с помойки, будешь ли ты заморачиваться с целым набором инструментов, который в нормальную деньгу обойдется, а потом на все про все ещё месяц геометрию выводить, вручную. Везти куда-то на шлифовку поверхностей, - да упаси боже. Вокруг такие пейзажи показывают, думаешь в окрестной деревушке стоит фрезер со станиной 6 метровой, и краном для сгрузки-погрузки? По этому сценарию весь народ с канала разбежится.
@@user-tp4zk1df4v с краской, конечно, перебор. А что касается направляющих - скорее всего большая точность им не требуется. Лично я бы при таких вводных максимум внимания уделил бы подшипникам шпинделя, т.к. биение патрона приведет к тому, что изготавливаемые детали будут крайне убогими на вид. Все остальное может лишь создать некоторые сложности в работе
The value of that lathe and it's new life doing what it was intended to do is totally worth while.
Originally made right here in my home state of Indiana. My compliments on knowing quality made goods when you see it.
The lathe has a taper turning attachment, very nice.
are you talking about the tool post and compound rest
Surprised that no parts had to be replaced or re manufactured on such and old restoration project. Well done.
Great job. A painted chuck is something new to me, next level:)
Not the best idea.
Do you think the entire machine needs to be rebalanced or is it a wobble lathe?
C’était mon métier tourneur que j’ai eu à Cherbourg département 50 le bout du monde en France en 1975 quand j’ai 23 ans maintenant je suis retraité j’ai 70 ans c’était le bon temps de la jeunesse
instolling the brass bushing by hamering with steel hammer will result with flat spots on the bushins
I'm even more impressed that you got everything back together!
He always does!😂
Very very SIÊU. VIỆT NAM nhiều người tài. bao nhiêu chi tiết. BÁI PHỤC
Вот почему я- не токарь, не фрезеровщик- смотрю на этот станок и в душе все поет, как когда смотрел «шоколадницу» Леотара или Первый раз вообще ходил по выставкам яэрмитажа? Наверное потому что это -не ЧПУ, а к этому еще прилагался Мастер!!!! С руками и душой. Наверное мы еще будем плакать по 19-20 векам.
I immediately knew you didn't know what you were doing from the start when you picked up the lathe under the ways. Good luck with a bent machine.
I would have to have this video to get it together again. this video is great. Granny 92 USA
Inricate, complex work, and you know how to use the lathe...WOW!
по сравнению с другими реставсраторами это ещё ничего так, хотя к некоторым моментам есть большие вопросы.
в данном случае про точность можно забыть, но работать-то оно работает, без сомнения.
Так он и грязный не крашеный не мытый работал. Они же ни чего не ремонтировали разобрали помыли покрасили собрали и фсё.
It amazes me how you fellas can rebuild a machine with so many parts. Good job.
LoL, so ironic, an American lathe getting repaired/refurbished in Vietnam.
Good work! Was interesting to watch this.
Thanks for sharing.
Если станок в чемто просажен ,то после такого демонтажа и перевозки . Место ему вприемке чермета. Неточто соток ,но и десяток не пой маеш.
чем их ловить? все лимбы закрасил ))
Допуск миллиметр, мину ум!
На хрена его было разбирать? Состояние направляющих, коробки скоростей, коробки подач и механизмов фартука идеальное. Всего-то надо было помыть и покрасить... Кстати, это чудо ещё и патрон покрасило... Варвар, бль!
На что хватило ума мозамбикского
@@user-dq9dn1hd6u они из въетнама
@@Baron_Ungern_K я образно.
@@user-dq9dn1hd6u это понятно, но уж слишком образы не те, негры и азиаты не так похожи, а мы не расисты, а современные люди цивилизованные
It's not at all a restoration..
It's a kind of refreshment.
El esfuerzo de cada quien por hacer lo que le gusta vale la pena,y eso se valora no se crítica.yo en lo personal felicito al chico.yo fui mecánico industrial.dsd Venezuela
Great job on the lathe machine. But beds and chucks are not supposed to be painted. The handwheels are painted but looks like you missed a spot 1:12:57. If possible all levers and handwheels should be painted red. But otherwise it's a great job saving a lovely old lathe.
you a great job on that metal lathe I was very impressed. thank you
Excellent Job. These old machines still have a lot of great uses and can be used to start a business on the cheap. Excellent work.
Kỳ công quá! Tôi cảm phục các bạn! 1 video tuyệt vời!
Great job! Good effort, but don't forget to add spindle grease to the tapered roller bearings, the bearings will break without it. Also you are the first person i have seen paint a lathe chuck!
I don't why he didn't paint the items as they were apart, especially the tool post / carriage.
@@Azorgi01 When the bolted together connections are bare metal to bare metal, it's more stable and precise than having that double layer of pant between the two parts. Although, in some places on the machine, that wouldn't be a concern.
@@vadimbellous8313 yes, but the proper method is to mask off the areas that do not get painted to stay bare metal, and it’s a perfect finish. It’s more time consuming but in the end a fully proper job.
@Azorgi01 yes, in countries with stable electricity and running water we do. i wonder why😜
More of a clean and service rather than a restoration, but I enjoyed the video anyway.
Отличная работа поздравляю с удовольствием посмотрел видео.
A great job done by all 👍
Им надо было не так сделать. Я вообще не понимаю, зачем они грязь убирали? Под краской-то и не видно будет, а если отойти, так вообще класс. Этот станок будет классно смотреться на детской площадке, только на суппорт нужно ещё коня на пружинке поставить, и обязательно не забыть его покрасить. Ну, думаю, эти ребята про такое не забудут. Хотя, знаете, они же забыли покрасить направляющие, и шестерни передач, так что напоминание о покраске коня всё же оставлю.
Я как не разбирающийся спрошу, регулировать всё равно же надо, настраивать?
@@paracit100 Щабрить нужно очень много. Настраивать, да. Этот станок рабочий с виду но на нём ничего нормально не сделать. А эти ребята просто развлекли: не понимая, что это такое, как работает, они просто отчистили и покрасили. Шкивы, в месте с ручьями, патрон, суппорт, не разбирая, и т.д.
Paint 'repair'. Painted headstock V-ways, painted the chuck jaws and all, painted the taper attachment slide surfaces and from the looks of it, dinged a few bronze bushings so that they are not in good shape anymore.
Nice paint though.
During and after WWII, my Daddy ran a Davenport turret lathe powered by an overhead jackshaft and 8"-ish leather belt 12-16 hours a day, and I wonder what happened to all those old jackshaft powered machine tools Nelson Electric Company used for 75(??) years. The plant he worked in was built about 1900 and moved about 1970. I was too little to know if the jackshaft was electric or steam powered-I'd guess a BIG electric motor. He also ran a Bridgeport bench lathe and drill press powered by leather belts. I was about three watching him turning something on a bench lathe and fascinated by his spiral of metal 40-60 feet long across the shop floor un-broken. His supervisor said "I.G. knows what he's doing!" I still remember the SMELL of high-sulphur dark cutting oil on GOOD steel! I'm nearly 70. He admired the guy that ran the vertical milling machine. "You can do more damage in less time with that machine than you can imagine son." The guy at my engine machine shop that runs the Sunnen cylinder honing machine is the artist.
This is good stuff. The old America.
He didn't line up the oil hole's on the brass bushing's don't know how long this will last with out oil on the derive shaft's.
Probably not long. But I personally liked how all the hazardous stuff is just scraped, grinded and hosed off onto the floor and down a drain to wherever that may go lol. If I had done this video environmentalists would’ve lost their shit and called the EPA.
@@petethehawk5186 in most of the developing countries, people just trying to get food on the table for their families. They don’t care or worry about the environmental problems.
@@Kqtx1212 I hate when ppl from first world nations cast aspersions on people trying to survive in transitioning countries. Neglecting to acknowledge that this is how THEIR country behaved and manufactured for nearly a century before they wised up. People need perspective and nuance.
It'll last a lot longer than it would have before he restored it.
@@adamwendt8972
Of course the self hater chimes in lol. You’re the guy that thinks you’re country is the worst place on earth.
Я рыдал когда он поперечку красил....
Не, мне больше понравился обратный электромонтаж того же булшита, что он снял получасом ролика ранее. Причем ровно на те же сопливые провода )))
Надо Доктору Дью Скинуть!😁 Пусть порадуется человек!😁😀 Да и Негоде Игорю, а то чё они понимают в Станках и реставрацию, каких то фрезеров и прочего!🤣
Trabalheira meu irmão....eu sei porque já reformei 2 tornos...PARABÉNS
What is going on at your neighbours place? It sounds like its either a woodworking shop, or the apocalypse.
Those machines are very impressive, in my country everybody is fighting over those when available for sale, because there are few of them and if properly maintained it can last 100+ years easilly. They do not make them as they before, this machines are beasts. Great job on this restoration. Thanks
Restoration? Well its cleaned and painted, were any tolerances checked, are the slideways flat, are all the bearings OK?
@@peterdurnien9084 finally an answer...i tought i was looking the comments of another video :D
Incredible, you are definitely a man with a very special talent.. Excellent work, amazing results.
Faltou trocar os cabos velhos, retificar o trilho. E você pintou onde não devia. Mas tirando isso, parabéns ficou muito bom.
congratulations great job Amazon restoration
why would you go through all the trouble of resting it and then use all the same old wires?
Why did you paint the lathe chuck?
你是修理機台的人才真是棒我要向你學
Отличная работа ,отличный станочек!!!Респект!!!👍🤝
Думал сейчас восстановят, отшабрят все, подгонят зазоры, поменяют подшипники, а тут раскрасили 5 цветами и то колозно 😂
YOU ARE RIGHT, ITS BOTCHEP WORK
ALL THE BUSHING BEARING WORN.
AND PAINTWORK IIS INSULT TO ENGINEERING
Точность обработки плюс , минус трамвайная остановка!
Restoration with brush and paint. No repairs. They put the lathe back together the way they took it apart. The video shows several defects that were ignored during assembly. Some parts were damaged during disassembly. They were reassembled without repair. Dirt had accumulated in the teeth of the gears. The machine was not adjusted or checked after repair. Poor tek who buys it. After a brush and paint restoration, the lathe is beautiful but needs a necessary overhaul. It is not capable of precision machining...
Very nice restoration when you look after a machine it will perform well
This is not a complete restoration of the machine. You simply dismantled the machine, washed, cleaned, lubricated and painted. Even things that don't need to be painted. Why paint over the handles, tool holder and lathe chuck? It looks like the work was done only to resell the machine.
Would've liked to have seen some more actual mechanical repair here!!
G&L is Giddings and Lois, and these lathes love to be green again though.
Lots of work done here and the paint looks fine. Not sure where that red came from though.. lol!
Que bonito es la reparas ion de esta hermosa maquina felisidades de t💘💘💘
Exelente esplicacion y majistral programa muy educativo los felicito
You have earned your strip, great job 👍👍👍👍👍
это не восстановление , а " предпродажная подготовка".....
Really nice to see someone take the time to restore this piece of machinery. Not too many people would make the investment in doing this. Good work. You deserve a pat on the back and a cold beer.
Thank you for this informative and educational video!
Exelente trabajo y exelente video.
Your country has very modern repair machines. The machines are really big.
Super jest jak nowa tokarka ale zalecam piaskowanie pozdrowiam serdecznie 👍👍👍👍👍👍👍👍👍👍👍
Realmente foi um belíssimo trabalho de recuperação desse velho torno.
Parabéns aos que executaram todo o serviço com competência!
Un pobre loco todo a base de martillo esos son unos piratas
47:24 is exactly why you dont use and impact to put stuff together, snapped that arm. It was real quick but if you press "." you can go frame by frame to watch it
Very nice VDO.
all they did was paint it, no bearings replaced no seals wtf
lot of work, sad that they never cleared out the old sludge and grit from between the lathe gears. Will make a nice crunching sound when it's run. Ug!!!!!
わ
Monstermaschien Abs a Great Mechaniker
Interessante que eu usei algum tempo um torno na firma e nao fazia ideia de como e uma maq tao complexsa com tantas reduçoes nestas caixas de sincronizaçao de ritaçoes obgd pela bela aula .
Износ станины, направляющих, подшипников и втулок. Точности от этого станка ждать уже не придется. Но как учебное пособие-нормально👍
All the wear parts on these old machines can be replaced.
Painting and cleaning != restoration
Yep, I'm thoroughly 100% jealous
Почистили и покрасили... это да, выглядит красиво. Но как по показателям точности я очень сомневаюсь после такой сборки. Черновое да, а о точном точении не стоит даже говорить. Ребята хорошие механики, но плохие станочники. Это не ремонт станка, это покраска и только.
Но за труд однозначно like.
It looks like a lovely little machine. The gearbox looks nice and simple too.
Uma das minhas paixãoes é TORNEARIA, e esse tornão deve ter uns 35 anos,acredito,e depois de reformado,só o ouro!!!!! PARABÉNS PELA ARTE DE REFORMAR E TRAZER A BELEZA A RARIDADE.
They said it was built in 1925, built to last hundreds of years if properly taken care of. 😊
Лайк. Я понимаю конечно, что хорошо помытый станок, это половина капитального ремонта. Но как же у нас с геометрией? как со шлифовкой станины?
Ну вы и загнули шлифовка, там и болгарка большая роскошь не то что плоскошлиф.
@@rpken3590 А че с болгаркой нитак? я и болгаркой, прилично заровняю. только поверочный инструмент дай.
@@fainderskurs-koi8767 Кувалда для поверки вам подойдет ? клас точьности 2кг =)
@@rpken3590 странный вопрос. нужна линейка, уровень и часовой индикатор. с этими инструментами, можно вывести станину в две три сотки.
Пилить болгаркой станину это вандализм, только продольно шлифовальный станок может дать 2,3 сотки при нормальной базе а база это зубчатая рейка.
Awesome video guys.
Как была проводка на соплях так и осталась!!!
How you can remember where everything goes is a feat all by itself. Outstanding Job!!! 🙏👍
He used schematics/ blueprints to take apart and rebuild the machine.
Maybe he watches his videos
That's why I record myself disassembling everything I restore or rebuild. Even though I don't post them.
정말로 훌륭합니다.(That's fantastic.)
I'm sure there isn't a micrometer within 100 miles of that lathe.
Nice job but next time paint it one or two solid colors.
00
How to take a old worn out lathe apart, improperly clean it, reinsert parts like a hacker and then paint it.
Now they have a crappy worn-out lathe that looks pretty..
Can't wait to see your next video. By the way, not a crappy lathe but a very fine one. And judging from the close-ups of nearly all the gears, the lathe has hours on it, but is very unlikely to be "worn out".
Bạn khắc phục sửa chữa khuôn tiện rất tốt 👍
For lathe painting is a last thing to do. Scraping of guide lines is first. Second-all bearings. While they did'nt do it, it's worth not more then before. Probably less, cause they puted together something in wrong way
There's always one, so called expert in the comments. Usually they're condescending, pompous, windbags, that are as full of themselves as they are, full of shit. Congratulations on verifying that opinion.
Where’s your video showing the correct way to do this? I checked your channel and didn’t see it.
@M. Gengo Veo que eres de las personas que prefiere que NO se les saque de su error, ni para hacer las cosas bien. Aceptar las críticas constructivas, mejora tu trabajo. No creo lo entiendas...
@@dirtyshirtinfo Cuando una persona sabe hacer su trabajo, no tiene que demostrarlo en vídeos. Algunas personas aceptan los consejos y otras, (Tú caso) NO
anyone ever get one of the wire wheel wires stuck in them? I've had in the belly arm and the foot 🤣
To many to count
ร
Good job, now i hope you bring it indoors, and use it to fix other restorations you run into. a very powerfull tool right there.
47:24 is a good reason why you dont use power tools on reassembly, just take it slow with hand tools
Great job putting it back together and it looks great.
thank you very muck