Downpipe Replacement on Yamaha FZ1-N
Vložit
- čas přidán 26. 08. 2024
- AMC T-Shirts, Hoodies, Caps and MORE available now!
Get yours at: shop.spreadshi...
[[-------------- DONATE! -----------------]]
Support the channel through Patreon: www.patreon.com/andymancam
OR.. buy me a coffee! : paypal.me/andy...
[[-----------------------------------------------]]
After finding a crack in my FZ1-N's header pipes, I was lucky enough to receive a replacement set of downpipes from an impossibly generous subscriber! HUGEST of thanks to Northern Ninja Runner! You saved the day!
So here's the video of me removing the old pipes and fitting the new ones. Can you guess how many exhaust studs snapped off?....
[[------ NEW AMC STICKERS! -----]]
Black Camera: bit.ly/AMCamblk
White Camera: bit.ly/AMCamwte
Black Mount Yin: bit.ly/AMCmnty...
Black Mount Yang: bit.ly/AMCmnty...
White Mount Yin: bit.ly/AMCmnty...
White Mount Yang: bit.ly/AMCmnty...
Black Set: bit.ly/AMCsetblk
White Set: bit.ly/AMCsetwte
FULL SET: bit.ly/AMCfullset
[[---- REELSTEADY GO! ---]]
This video was stabilised with Reelsteady GO! Get $5 off with code 'ANDYMAN'
www.reelsteady...?p=H1vxu0Y98
[[----------- MUSIC -------------]]
" " by
The music in this video is from Soundstripe: soundstripe.com?fpr=amc20
Get AMC's ALBUM here: bit.ly/AMCcd (includes channel theme tune: 'Happiness')
[[------------- GEAR -------------]]
Clothing: goo.gl/hNbkCr
Tyres: moto.michelin....
Audio Recorder: amzn.to/2QYrVnv
Intercom: amzn.to/2CY9KpJ
Sony X3000 Action Camera: amzn.to/2GtfwyT
Sony AS200vr Action camera: amzn.to/2mvfYX9
RAM Mount: amzn.to/2PyRJSw
RAM Clamp: amzn.to/2M2S9Ok
SW-Motech 'City' Tank Bag: amzn.to/2MpQwwE
SW-Motech 'Blaze' Panniers: amzn.to/2Mrx8PT
3M Dual Lock: amzn.to/2MuNN5g
Wera Tool-Check Plus ratchet set: amzn.to/2nqq6OB
Leatherman: amzn.to/2nfNMrx
Gear Gremlin Cable repair Kit: amzn.to/2nfI2ya
[[------- SOCIAL --------]]
Twitter: / andymancam
Instagram: / andymancam
Facebook: www. andy...
[[------ LEGAL-----------]]
I am a participant in the in the Amazon EU Associates Programme & Amazon Services LLC Associates, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk & Amazon.com
Hey Andy I’m glad the transplant well for you on the bike. You didn’t even use the cable ties 😉
So true niga, I was so shocked that there was no drama in this video. I am thinking everyone watching has been cheated a little. But again Murphy law is sometime with planning ahead thing can go ticky boo. Lol
You sir are a legend very few people out there actually help people without wanting. Nice one 👍
Huge plug to you brother for stepping in and helping Andy out.
Many many thanks to you mate! Cheers so very much. Sorry about the cable ties. I was saving them for emergency repairs and the worst just didn’t happen! 😁
@@joewood5762 Thank you
Awesome Northern Ninja Runner. That's what being a biker is about.
Absolute legend!
It's nice that sometimes things go the way you want! Thnx for all the video's you make!
It had to happen sometime!! 😬
WAIT!!!! Did I just witness a drama free Andy Man's Garage? .... Well I never thought I'd see the day (maybe a little disappointed).
Top marks to the subscriber for being an absolute gent in sending you the down pipes.
Lucky man Andy. High five to the follower who passed them onto you. You mentioned your dad. I look forward to the day you can visit again & possibly take his new bike for a local ride. I’ve got my sons Zephyr kind of in storage whilst he’s bunkered down in Norway with his Viking shield maiden. I take it for a spin about once a month & then pretty well give all metal surfaces a spray with the old WD40 before covering it with old sheets. You’ve now given me the idea to pay a little more attention to those pipe studs. Cheers mate, hope all is well. Ups & downs here in Australia, but certainly not as dire as many countries. 👍🏍😷🇦🇺
Totally! It all came together beautifully, huge thanks to Northern Ninja Runner! 😍 Nothing wrong with a bit of preventative maintenance! Hopefully you’ll never have to budge those pipes though. Glad things are ok for you guys down there. 👍🏻
Calming to watch 👍
Good engineering on yams
Partially! I’ve had a few problems where yamaha left the engineering book in the toilets!
And the pipes live on! Nice work Andy and a huge shout out to North Ninga guy, man, boy. ☺ that was very magnanimous of him! Ride on Andy and be safe.
Cheers mate! Yep, thanks to incredible generosity, the journey continues!!
Should have clickbait titled it; 'It's a fix', which is what it was, the fixing of the downpipes problem, I mean. Nice filming while lying on the concrete. Top vid as always.
That is so cool that guy gave you his not required down pipes that is just fantastic news I am also happy as my sore throat was simply a virus was tested for covid 19 to be told negative stay safe. Always have wd 40 in my garage
Incredibly cool! Good news about your false alarm too!! WD40 for the win!
Nice 1 Andy. You were lucky with all the bolts not being seized.
Thanks Lyn. Absolutely, Lady luck was definitely on my side with this one!
No drama because it’s a quality product 👍🏼
I think more because it was protected from the elements for most of it’s life!
Gotta love the simplicity of the FZ1. Changing the exhaust on these is simple if the nuts move:)
Many of the jobs are easy, when they go to plan! Sadly we’ve all known it otherwise at least once!!
@@AndyManCam an hour job quickly turns to 2 hours... yes we all know:)
Cracked down pipe can be stressful my thoughts with you mate. Glad someone offered you theirs 😉
Looks brand new! 👍
I know right! Looks great!
Awesome to see folk paying it forward! :-) Nice one @Northern Ninja Runner
Smooth transition, very nice 👍 Always a nice treat when things go on/off like that...blessed days.
Cheers Eric! I agree. I was expecting hours of graft, but was finished in 45 minutes!!
Holy crap good thing I watched this - otherwise I wouldn't know the pipe gaskets should be replace - I happen to have mine waiting to install right now...
Well, i forgot about the gaskets until it was too late aswell! 😂
On My knees like a good Young Catholic boy ., Praying 🙏 . Watching ... 🏍️.
nice bike! i have a gen 1 fz1 and I'm about to try wrapping it, thanks for all the tips. My headers are cracked as well, 1 tube ended up cracking all the way around and it started vibrating and sounding like garbage lol, i bought a used header off ebay for it.
Good luck with the wrap! Hope all goes well. Enjoy the awesome bike!
I know the pain of removing exhaust studs from an old bike. Did it to my '99 VFR last year. We had to heat the block & weld testicles onto the studs to get them out. Thank god I have engineers for friends!
Ow... my neck hurts just watching you do that. Oh to have a proper lift. You were really lucky with those exhaust nuts.
Tell me about it! A proper lift and enough space to actually walk around the bike would be pure heaven!
Hi Andy I had a 1st Gen fzs Fazer 1000 for 5yrs, fantastic bike but I needed to repair the down pipes as well . 4 of the studs give up the ghost but i did manage to drill and replace them thank god . Top videos keep them coming 👍👍
Ouch! Seems it’s a problem that can plague any and all bikes! Good that you got it sorted though Jason. Cheers mate!
Dodecagon is a fun name for double hex socket, octagonal socket is not something you need very often
clean
Top job, you were so lucky with those bolts! 👍👍
Super lucky! But I’m not complaining!!
Glad it all went well.👍🏻
Thanks! Me too! 😊
I find these very, very helpful-thanks, Andy!
That was the perfect garage tutorial.. Brilliant!!
Nice. Trigger's broom comes to mind!
Haha! Not far off!
A spot of copper based anti-seize will keep those new to you, pipes in good wear and also help with future removal and helps with stress fractures from happening to the head studs. Just a thought.
Just replaced the front pads on my 2018 GSA and now kicking myself I didn’t film it!!; awesome luck with the nuts/studs, bet moonfleet/Del wished he had as much luck on his latest project👍😩👌 Thanks for sharing Andy👌
Nice. Pipe
Thanks, I’ve been working out! 😚
That continuous background tune made me think the end of the video was near more often than I dare to admit.
Haha! That just means you’ve been watching too many of my vids!! I didn’t actually think about that effect!! 🤣
Amazed that went so easy! 👍
That was tense, I know that feeling when you get to the point when you finally pick up that spanner.... good job and another great vid. In this mental world, bless you @nothern ninja runner
I bloody well hope you got a lottery ticket that day. I was expecting a swear jar full to over flowing with enough cash to buy a new bike. The sun shone on you for sure.
I wish i had! It was an unheard of success! I was expecting a far more eventful job too!!
I was kinda rooting for the lambda sensor to put up a last ditch attempt at giving us the goods, a story to tell our grand kids, but alas...
Top job mate
Many thanks Richie!
Some nice shiney pipes dude. This is my plan for winter maintenence this year... The Autosol treatment that is not the replacing of the pipes.
Well done another great video I missed the swear words but glad it went smooth
Thanks Peter! I’m sure there’ll be plenty of swearing to come. I’ve still not gotten rid of the Garmin yet!! 😂
Garaged bikes are only good if they were kept maintained. Mine wasn't so despite relatively low mileage the owner had to replace the rear shock due to rust and generally the whole bike is just rust lol. It was cheap and ran properly though and that was what I needed at the time
That sounds like a bit of a nightmare! Were there holes in the roof?! Cheap has it’s benefits too though! My FZS600 was a rotter when i got it! But 500 quid was to good to pass up!
Thoroughly disappointed that the swear jar is empty. However the nut gods?! have clearly been watching how disgusting the rain gods have been to you. Top work on the video as always.
Mine need doing, and I'm bloody dreading it. Mine are in terrible shape, I allready know I will need a nut splitter, heat,drills, taps dies etc,mole grips. And a whole heap of patients.
I just cant bring meself to get into it!!
You were lucky thanks be to dog.
Oh dear. I’m thinking positive and rust loosening thoughts for you!
I can't believe we weren't treated to any barnyard sound-effects!
I’m really sorry (not really sorry!!) 😜
Now you gotta change your spark plugs so i can learn from ya lol since mine are do and your my go to fz mechanic 🙂
Haha! That’s a job I’ll be avoiding as long as possible! Although if you check out the quickshifter install, you’re already half way there.
6 out of 8 studs snapped on my fz6. Absolute nightmare
why wouldn't you fit a lighter set? or race pipe? or
For the reason that plagues most of us. Money. Lighter pipes and full systems don’t come cheap and unfortunately I’m not made of money! 😂
That are imposible.. lucky you..sometimes the luck is in your side. Mean the rain is not kind to you..often anyway..
Haha! Yep, rain is cruel, but the bolt gods were on my side! I’ll take the win!!
You lucky bugger! Have snapped a few of them in my time and am afraid to go anywhere near mine as there very corroded.
I was sh¥t scared of it too! So happy that it went the way it did!
woo hoo,sounds great fella,
Cheers mate! You mean with or without pipes?! 😜
Another great video Andy 👍🏻😎 Happy with BOS exhaust 💨?
Many thanks Jesper! Really happy with the BOS mate.
AndyManCam I’m looking into the full system from your countrymen from Delkevic 😎🏍💨. Or Bos Og Akrapovic 😂
Might have to put all of them on 😂😂😂
@ AndyManCam, do you have a picture of the crack on the original headers? also what caused the crack in the first place? I have never headers of OEM headers cracking ever.
Sorry Sherlock, I’m afraid the pipes are long gone! 🕵️♂️
It was a very wise idea to soak those nuts for three days with WD40.👍
I’m glad i had the time to do that! Though they were always in pretty good nick tbh. This bike has clearly always been stored in the garage.
Ok
What's the best way to clean your down pipes ?
I use Autosol metal polish. amzn.to/3sSXg9v
You should re-torque those nuts after putting some miles on it, as it's aluminum the engine needs to be cold.
Great job, went really well. Andy, besides the rings, is exhaust paste necessary to create a gas seal when reinstalling the exhaust slop on or ok to just reinstall ? I only did an exhaust reinstall (full system on little Yamaha Sting) once after paint job many years ago and just reinstalled so was just wondering.
Thanks! I didn’t bother with any paste, and the seal seems just fine. 👍🏻
I am interested in how you cleaned the engine while the headers were off. What kind of products did you use ?
WD40 all the way! Then a bit of ordinary car polish.
Downpipes? Aren't those manifolds, technically speaking?
Downpipes afaik are the manifolds that carry the exhaust fumes from a turbocharger to the cat. Curious to know if in british english this is different?
Downpipes are manifolds. Turbo manifold, exhaust manifold, intake manifold, all manifolds! This particular manifold is made up of pipes, that go down. Downpipes. Also known as the collector or header pipes. Call them whatever you like. Many names, one thing.
My nuts were black and blue, but my stud nuts were rusted so much to the studs that the studs just came out without the nuts budging when I changed the Gaskets.
Ouch. Still, better than the studs being stuck in the head. 👍🏻
But, but , how, what, .............................,............................................................. Nope, speachless!
I know! I was just as stunned as you!
Andy do you still have this bike? Or traded on the cb1000?
I traded in the FZ1 for the CB1000R, which i then traded in for a KTM 1090 Adventure. 🤙🏼
Do they still make the yamaha fzn 1??
Nope. They stopped with the 2015 run.
@@AndyManCam ah ok! What a shame. Thank you 👍👍
Pre-emptive twists on the cable?? I reckon you sacrificed some pre-emptive souls to Dantes dark demon of exhaust hell no.3 Jammy sod :)
Absolutely possible! It all went a little bit too smoothly!
I snapped 2 manifold studs. In my defence the studs where 22years old and about as solid as a wet paper bag 😂🤦♂️🤦♂️
Hey Andy
Is it still stock suspension, if not what mods you done?
Completely stock mate.
No way.... it was too easy! My own 06 FZ1 had 85k miles on when i was remowing pipes for a engine swap. Nuts didn't give up so easy. Plus flanges were paper thin from rust and crumbled im my fingers so i had to make new ones myself as they're impossible to buy without paying for whole downpipes assembly.
Im green from jelousy watching that..
That’s very annoying! Sorry mate!! I had imagined similar experiences for me, but was far luckier! Glad you eventually got yours sorted out though.
Thank god Garmin don't make downpipes or that could have been a swear fest .
Haha! Double sweary!!
You lucky basterd haha, did this on my hornet a few months back and it was 3 days or cutting and drilling and re-tapping, nightmare! Did you put copper slip on the studs before reinstalling? I keep applying some in mine, every few months, for preventative maintenance.
Ouch. Sorry to hear that! TBH i was expecting the same for this adventure! I’m so happy it didn’t go that way! I didn’t put any copper slip on the studs. I imagine that they get so hot, that anything would just be burnt off pretty quickly. I could be wrong though!
@@AndyManCam Normal grease would but copper slip is designed not to melt away at high temps. 👍
Very poor video only tuned in to learn a couple of new swear words, and found a man doing a decent job of things I do hope this isn't going to be the norm 😁
I’m really sorry Phil. I’m certain that service will return to normal very soon!
magic happened, from wearing proper working gloves ;-)
Your logic is undeniable! I’ll have to always wear gloves from now on!