How To Fix A Sticky Pop up Sprinkler
Vložit
- čas přidán 5. 07. 2024
- In this video, I will show you how to repair a pop-up sprinkler that will not rise or pop up when water pressure or sprinkler system is on. I will also show you how to fix the pop-up sprinkler when the riser and nozzle will not retract into the body.
Fix It John and affiliates are not responsible or liable for any loss or damage caused by your understanding or interpretation of the information in the videos. Always use safety precautions, protective wear, and refer to manuals, other websites, books, or advice for projects contained on this website or in these videos. The videos are to be for learning purposes, but not guarantees, solutions, or answers. Always use precaution and safety in every project that you do. Fix It John recommends using safe practices when working on any project in every aspect. Any damage, loss, or injury resulting from improper or incorrect use of equipment, tools, etc., or from the information contained in the videos at Fix It John or on fixitjohn.net is the sole responsibility of the user and not Fix It John. - Jak na to + styl
beautiful work my man, we moved into a new house and ive slowly been uncovering some of these popups amongst the grass! this helped a great deal after finding them all to have them working more smoothly (after some digging!)
I hope you like your new home. Thanks for watching.
I have used petroleum jelly with good results. But honestly I don't remember exactly how long it lasts. The advantage is you don't need to remove the assembly. The disadvantage is that it feels mildly inappropriate ;)
Another method to trim the edge as shown above, would be to rub the gasket on some fine sandpaper on a flat surface.
I have used sandpaper also.
Probably best to slip a thin rubber casing over it before you apply the lubricant.
I did not expect to snigger when trying to sort a sprinkler problem. My hat is off to you sir.
Sprinkler Butcher, try cleaning the gasket before chopping it apart. You should get pretty good water flowing out the top😂🤣😝
Thanks for the tip.
You can also use plumber's grease on the Black shaft that will make it move smoother
Ok.
Plumbers grease did nothing for my two problem zones. I have to manually hold one of the heads up and have my wife turn the zone on and that gets them all up and spraying, or I turn the zone off and then on quickly after and it'll get them all up. Not sure if I've got a pressure issue for 2 zones or just corroded heads.
What about using a little wet/dry sand paper, before adding grease, to smooth the black shaft part, or on inside of white part, to stop it from snagging up so badly?
Love your 🍍🍍
Thanks a bunch!
Heads cost 1 dollar way easier to replace and when ypu use orbit heads your asking for issues. Spend the extra buck amd get a good head .
Great point
I recommend not even going to Home Depot or Lowe’s at all. I would go to a Ewing irrigation store or a local Irrigation store. They have more a variety of sprinkler heads and they are little bit cheaper. I prefer to use Hunter sprinklers because they are more durable and they last longer. They don’t stick as easy as Rain Bird or Toro and Orbit sprinklers. I also recommend using the Hunter MP Rotator because it distributes the water evenly and will save you water on your water bill
Can't you just take some 2000 grit wet sand paper or something and work it until it's seats good?
Hi Andrew, try it let me know if it works. Thanks for watching.
That’s exactly what I was thinking
Yep
It is still working.
What if I have a pop up that I don't want to pop up?
Will a heavy rock on top prevent it from popping up?
Hi John, thank you for your question. It would depend on the size of rock and the pressure in your sprinkler system. I hope that helps.
@@fixitjohn yes I already thought it would depend.
But please answer my question. Is it theoretically possible?
@@Horsecentstoday I am not sure.
@fixitjohn if a person can press a sprinkler head down with a foot.
Then a decent rock should achieve the same
People put sprinklers too low or build up dirt around them after they are installed.
It makes it a pain to remove it.
by removing that lip you just made it worse. dirt will get in there and lock up the shaft even more. a good head with nozzle is about four or five dollars at a sprinkler supply.
And this one was free and still working. Thanks for your comment.
Total pilot voice. 😂
Well did it help.
@@fixitjohn don't get me wrong! I love your pilot voice! But I chickened out on the fix when I saw I had to dig down in the dirt. Dang, I'm going g to have to get out the big tool (the checkbook) to get my rouge sprinkler head fixed. 😭