If ya get a chance Brock, check out Shawn Smoak, he's a Master Mechanic for Pro Caliber Motorsports in Washington. He knows MBW, Spyder and Harley, makes a few how-to videos, but mainly post his rides in and around the Vancover area. His site is Smoaks Vlog.
@@jenniesgarage Nobody can be 'too kind' to you two. If ever you find yourselves on Australian soil I have a room for both of yoy, a shed full of 'projects' and my wife will surely send you off with a couple extra pounds of nutritional storage.
I've been married to my husband for 28 years. I've never tried to change the fact that he's a motorhead. My house and yard and garage is mainly guy stuff. His current love is snowmobile asphalt racing. We talk about it together and I go to the races with him. He cares enough to do my stuff. I try to make an effort for him.
Brilliant! Most people these days would probably have sought the parts out on eBay paid way too much because of the age of the bike and then waited 6 weeks for them to arrive! Recycling at it's best!
This was one of the most advanced, (timing chain), “will it run” videos I’ve seen and I’ve watched a lot of mustie1 and other “run” channels! Thanks. Fun and entertaining. Great job.
Mustie1 has the benefit of lots of tools and connections for parts, hes also willing to put money into stuff to make it work. Jennies Garage, he usually barely has the right tool on hand and doesnt like putting a lot/any amount of money into projects. Yet he still gets them to work. As for entertainment value I'd say its about even. This channel brings a whole lot of comedy and knowledge. Mustie has a lot of great stories and knowledge.
There are now so many repair & restoration channels on CZcams, but somehow this channel manages to be in a category of one. Digging light switches out of the garbage on a hunch that they contain an appropriately-sized spring to fix a small engine is peak content and I cannot get enough of it.
Flipping house's. Some they rent out some they sell. Live in them long enough to fix up on the cheap move on to another house. Very smart saves loads of money on labor and driving back and forth... but at the same time sucks moving that much.
You guys are the only ones that my wife and I watch your videos through our roku player in our livingroom. We both tremendously enjoy yalls spirit and banter. Like I've always said, y'alls channel is quality over quantity. Greetings from Oklahoma.
If nothing else minor fixing like that ridiculous smoking should be fixed if its just minor thing like crap between piston rings. If the 3 wheeler design is dangerous and crap, the engine might be well suited for something else. Essentially just make new 2 wheel front end, or put the engine into offroad cart. I would love to get that engine for such project for cheap, too bad shipping would be hella expensive :/
Not sure how I missed this video until 2020, but man. Once again I'm reminded how much I love this channel. You guys' on screen chemistry is so entertaining, even though you don't come off as performers or CZcams personalities (and I mean that in a good way). And God Jake is such a wizard with these small engines. Every video feels like I'm more amazed with his knowledge and learn 5 new things. Reminds me of fooling with these machines as a kid with my old man. I think you could even give him a run for his money
I've wrenched on hundreds of these style Honda motors. 15 minutes in and I can immediately tell the timing chain is off a tooth. Edit: So it was off 2 or 3 teeth. I'm amazed the piston didn't smash a valve.
Hey, quick question for ya. What would cause my 200s to run good at full throttle. Then at idle, it will run for a while then quit all of a sudden. I have to give it throttle to get it going again. But, it starts first pull when the engine is cold. What's my issue here?
Jennie, I started watching your videos yesterday and blew through them all so fast. I guarantee you if you keep uploading often you will hit a million subscribers. You taught me a ton through your videos that I can guarantee I will put to good use and you have a great personality on camera. I hope to see more uploads soon and have a very merry Christmas!
Restored ones tend to sit around for a few years, In my area I have seen the same few fully restored ones trying to sell for a couple of grand. Where a fixed up one runs and sells for 500 or less, most times all one needs to do is clean them up, replace the handlebar controls ( 15) , add new tires ( 150 ), brakes ( 10 to 300 * really depends on if you need to replace a lot, Most times just pads, handles and a few things. , Change fluid, new carb ( 30 ), Lights (20) top end repair ( 15 to 300 * 300 is everything, Most times just a gasket set is all you need, Dry rot from sitting a lot of years. Pretty much every one that I have ever picked up for free or for 100 or less has really only needed carb cleaned or replaced. They all ran for years with out many issues. If I would do it today rather than years ago, I could have bought new parts and fixed them up nicer and resold them for a huge profit. Yet the market is trashed today because you can go out and buy a fairly nice tao tao quad for 700 bucks and up, may not be a 250 yet they run pretty good.
Really enjoyed your video, I needed something relaxing and light hearted right now. I’m a fan of anything with an engine that you can ride. Thanks for sharing.
man i have no idea how this channel came across my feed but i'm sure glad it did. you guys are great! funny, informative, educational. you have it all!
Love the way you analyse and solve a problem. Very clever and logical. I have smaller 3 wheeler with what I think is an ignition problem. I'm heading out to the garage loaded with ideas!
I don't know how this ended up on my feed, but I'm sure glad it did. I thoroughly enjoyed the process of you troubleshooting and eventually starting it! Great job!
Hey, I just wanted to let you know that this upload literally made my day. Keep your family and yourself first but always remember how much we all appreciate your uploads.
I am a HUGE Honda 3 wheeler guy. I have 27 of them...I Thoroughly enjoyed this video and watching you bring that old bird back to life! I subscribed too, thanks for a great video. You and your wife make a great team.
I just found your CZcams channel and I ended up binge watching 10 episodes. I have to say I absolutely LOVE your channel. You both do a great job making these videos fun and informative. Keep up the GREAT work. You have a new subscriber in me. Look forward to catching up on older videos and new the next new ones to come!
I have over 11 trikes now in my collection, Hondas never fail! Amazing video it made my night watching it, no swear words at the trike, no hacking, just a good ol manual and fixing! And it started!! 3rd pull!! Amazing video. Subscribed !!
And with that last line I subbed, look forward to checking out more vids. Love the family working together, the comedy and the sharing of experienced knowledge!
PUBLIC SERVICE ANNOUNCEMENT PLZ STOP SCRAPING THE THREE WHRELERS they bring money on FB market place not a ton for rough ones but more then there weight in steel parts are getting harder and harder to find. great video 👍 glad you got the ole 200s back in service.
Pretty sure, the tap dancing instructor, kept saying it to lisa Simpson, when she was trying to learn how to tap dance. When she was learning how to tap her shoes, that's where I heard it from. Over 10 years ago.
30:34 “Burns a little oil... burns a little oil...” Smokescreen engaged! 🤣🤣🤣👍🏻👍🏻👍🏻 Honestly this is a fantastic intro to internal combustion engines. Check fuel, spark, air. Then go deeper. Keep up the great work!!
That's a cool old atv you guys got there, glad to c someone bringing it back to life and enjoying it, I have a 1984 Yamaha yfm200n atv, it burns oil just like yours, but mine has started up every single time, even when it's 5 degrees outside, they don't make them like they use too, enjoy it. , and be safe
The second I heard that noise I knew the cam chain was too loose. I automatically assumed it jumped time as well. I also assumed that’s why it was parked...lol. I love this channel...this is goals right here...husband and wife working on project bikes together.
man awesome video wish u did this 5 years ago when i bought one for 750 and had the same problem with the timing chain i couldnt find any good videos like yours and ended up selling it for 200 after driving for a year thanks again for video wish i knew mechanics like you do
@@tomhysmith835 Right? I have one in an barn now that won't start because the cam chain somehow twisted/kinked because it wont turn over at all. I nearly pulled my shoulder out of socket thinking it was the starter when in fact...it wasn't the starter, and I tried to pull-start. Lol
I learn so much from these videos everytime i watch them. I started my own little gig by working on bikes. All the unusual diagnostics or figuring out what may be wrong with a bike come from here. Like someone brought in a ltz400 and it was making a "breathing noise" from the airbox just like this one and it was an intake valve that was way tight.
Feel like CZcams finally recommended me something worth to watch, good job !! You both sound like a happy couple, made me feel like when I'm outside puting something together and my wife brings me a lemonade ahhh !! 🤝👏👏👏
I grew up on three wheelers. First a 1983 ATC110 and later a 1984 ATC250R. Wish I still had that 250R! Great video - it brought back a lot of memories.
I had a 200s and I’m pretty sure your video just diagnosed the problem I had with it. Skipped teeth on chain... wish I saw this video 10 years ago 🤦🏼♀️. Really comedic video, I’d say I’ll subscribe
after watching all of youre fixing motorcycle videos and stuff like 2-3 times ive learned alot about fixing bikes and i know how to fix alot of things now on bikes. great content and entertaining
I love you guys, step by step good teaching with a mixture of clean humor. And always happy Camera Girl. I learn quicker from your style of teaching, with a chuckle here and there. 100 thumbs up you two, oh and your son also.
"we'll have to be careful with this spinning wheel"
*immediately puts bunny ear shoe laces right next to it*
One of the most underrated channels out there.
Brock Haass not at all it does great to say he uploads like 2 times a year... if he uploaded more it would pop off
If ya get a chance Brock, check out Shawn Smoak, he's a Master Mechanic for Pro Caliber Motorsports in Washington. He knows MBW, Spyder and Harley, makes a few how-to videos, but mainly post his rides in and around the Vancover area. His site is Smoaks Vlog.
Thank you, you are too kind!
@@jenniesgarage Nobody can be 'too kind' to you two. If ever you find yourselves on Australian soil I have a room for both of yoy, a shed full of 'projects' and my wife will surely send you off with a couple extra pounds of nutritional storage.
These 2 are funny
I learned more about small engines in this video than anything i have ever seen combined
Brilliant vid
🤣
@Marcangelus1 I was thinking the same thing
how is that ?
Same. Learned so much from this guy.
Another testament to Honda’s ruggedness
Japanese engines. Best in the world.
ʀᴇᴛʀᴏᴀᴄᴛɪᴠᴇ I raced enduro for years, only bike to ever leave me stranded? Can Am
ʀᴇᴛʀᴏᴀᴄᴛɪᴠᴇ they really are
@@deborahchesser7375 'bUt ThE aUsTrIaN bIKeS aRe So ReLiAbLe" and somehow my 05 chinese pitbike lasts longer than my neighbors '16 ktm
@@ferris2323 one thing is older engines and older bikes were built to last, not to make the company money through repairs
You found your perfect match in a wife.
"Must have been a spark plug tree."
And she giggles.
Benjamin Blake yeah why can’t I have a girl like that as soon as I say anything about an engine my girlfriends like what the fuck are you on about😂
Not only that, she follows it up by answering one of his questions with “not enough spark plugs?”
@Z Z how so
I've been married to my husband for 28 years. I've never tried to change the fact that he's a motorhead. My house and yard and garage is mainly guy stuff.
His current love is snowmobile asphalt racing. We talk about it together and I go to the races with him.
He cares enough to do my stuff. I try to make an effort for him.
This upload is my christmas present.
Ill take it!!!
@@rogerthat9174 Being nice isn't difficult... Try it sometime.
Roger St martin you is stupid boi
Roger St martin shut the fuck up, I’d take this video as a Christmas present
Same
My wife is always telling me to get rid of stuff also, but I tell her just like you said, "The minute I get rid of it, the next day I will NEED IT!" 😀
Yep, ya toss, then ya need it. LOL.
The lightswitch trick is a stroke of genius!
Brilliant! Most people these days would probably have sought the parts out on eBay paid way too much because of the age of the bike and then waited 6 weeks for them to arrive! Recycling at it's best!
Yes
I was gonna say the same thing. It was brilliant
There was this girl in high school that had one of these. Rode on the back and boy did she scare the crap out of me.
Omg 😂😂😂 Made my day😂😂!
The 3 wheeler or the girl?
Lmao you were the girl in that relationship
Is she a man now ..just sayin you never know
Was just wondering what happened to you. glad to see your back.
And your front too!
@@zachdavis4103 I enjoyed his side the most.
This was one of the most advanced, (timing chain), “will it run” videos I’ve seen and I’ve watched a lot of mustie1 and other “run” channels! Thanks. Fun and entertaining. Great job.
Nice video, awesome to take something not running and bring it back to life!
Hi Stanley
Hi stan
"We'll have to put that down in the memoir's"🤣
+1
Will Clifford i’m still rolling...🤣
Anyone else want to see a Jen’s Garage / Mustie1 “will it run” build off !?!?!?
SCcarguy hell ya
Mustie1 wins hands down.
Mustie1 has the benefit of lots of tools and connections for parts, hes also willing to put money into stuff to make it work. Jennies Garage, he usually barely has the right tool on hand and doesnt like putting a lot/any amount of money into projects. Yet he still gets them to work. As for entertainment value I'd say its about even. This channel brings a whole lot of comedy and knowledge. Mustie has a lot of great stories and knowledge.
Hurtydwarf I agree jg is like the road kill but for small engines
SCcarguy both great Chanel’s
the fact that those tires hold air is a really good sign.
they can float across a river too lol
I'm so happy to see you guys making another video
I got a 1984 three wheeler and it runs
The smoke is a great help. When it stops smoking you know you need to add oil!😂
I used to ride one exactly like that, with almost the same damage back when I was a kid living in Novato, CA. Tow package and all.
If you had any doubt, we're still loyal, we'll still watch, we'll be ready for the next video
That was an amazing MacGyver hack on the spring.
I guess you could call it a “Free” wheeler
shut up
Never again
Why did you have to do that?
I hate you
schelmzylinder I love you
There are now so many repair & restoration channels on CZcams, but somehow this channel manages to be in a category of one. Digging light switches out of the garbage on a hunch that they contain an appropriately-sized spring to fix a small engine is peak content and I cannot get enough of it.
Your knowledge and enthusiasm is second to none. I just discovered your videos and subscribed halfway through the video. Thanks
This guy gets new homes more often than he gets new underwear.
@@aliceshaw8265 He is actually smart. People like him can easily get paid about 80k-100k in US for a regular 9 to 5 job.
@@justinsavs I'm not sure if I'm remembering correctly, but I seem to recall in one of his videos he says they have rental properties.
Flipping house's. Some they rent out some they sell. Live in them long enough to fix up on the cheap move on to another house. Very smart saves loads of money on labor and driving back and forth... but at the same time sucks moving that much.
The reason it started is cause it’s a honda
you know it
Landon Gentry exactly
@Edgar Daniels lol yea man 3 wheelers can be a handful
After the apocalypse,people will still be rolling around on these old beasts.
I like Suzuki better anyone? No ok
The husband is soooo smart. He can fix anything. I really enjoy watching your videos.
You guys are the only ones that my wife and I watch your videos through our roku player in our livingroom. We both tremendously enjoy yalls spirit and banter. Like I've always said, y'alls channel is quality over quantity. Greetings from Oklahoma.
Even though you said you wouldnt fix it fully. I think you should clean it up and keep it and put it to work brother
So you're the bad influence friend....lol there's always one in a group trying to get their friends in trouble with their old ladies. 😁
Agreed! Finish the project!! :)
If nothing else minor fixing like that ridiculous smoking should be fixed if its just minor thing like crap between piston rings. If the 3 wheeler design is dangerous and crap, the engine might be well suited for something else. Essentially just make new 2 wheel front end, or put the engine into offroad cart. I would love to get that engine for such project for cheap, too bad shipping would be hella expensive :/
Old Hondas NEVER die!
They almost always live!
It was built decades before some of your viewers were even thought of being born!
31:41
"How 'bout dat?!"
"We're already outside." :D :D
I wonder who else caught the reference.
Me, I love dr phil
I had 68 3 wheelers in can Chang the top end in two ours
Not sure how I missed this video until 2020, but man. Once again I'm reminded how much I love this channel. You guys' on screen chemistry is so entertaining, even though you don't come off as performers or CZcams personalities (and I mean that in a good way). And God Jake is such a wizard with these small engines. Every video feels like I'm more amazed with his knowledge and learn 5 new things. Reminds me of fooling with these machines as a kid with my old man. I think you could even give him a run for his money
I've wrenched on hundreds of these style Honda motors. 15 minutes in and I can immediately tell the timing chain is off a tooth.
Edit: So it was off 2 or 3 teeth. I'm amazed the piston didn't smash a valve.
Hey, quick question for ya. What would cause my 200s to run good at full throttle. Then at idle, it will run for a while then quit all of a sudden. I have to give it throttle to get it going again. But, it starts first pull when the engine is cold. What's my issue here?
the last 2¢ on atc safety and lawyers got me rollin
When you were contemplating what to use for a pull start rope, I noticed the emergency release rope ominously hanging from your garage door opener.
Eh gotta be at least 3 feet long or so :v
Just came across your video and as soon as I pressed play I couldn’t put the iPad down.....excellent work on the trike!
Love from the Uk..
It's 5 AM.. I need to go to bed...
This video is 34 min and... I'm watching all of it. Love you guys.
Nice to see that smile back on your face man!
This is great. I love the fact that people like this just work on stuff like this. It's both awesome, and resourceful.
Jennie, I started watching your videos yesterday and blew through them all so fast. I guarantee you if you keep uploading often you will hit a million subscribers. You taught me a ton through your videos that I can guarantee I will put to good use and you have a great personality on camera. I hope to see more uploads soon and have a very merry Christmas!
I’d love to see this 3 wheelie restored it looks like it deserves it
Therren Toth or at least new plastics and engine rebuild
@@morganhay859 yeah that would do some good for it
Love the dog pick
Restored ones tend to sit around for a few years, In my area I have seen the same few fully restored ones trying to sell for a couple of grand.
Where a fixed up one runs and sells for 500 or less, most times all one needs to do is clean them up, replace the handlebar controls ( 15) , add new tires ( 150 ), brakes ( 10 to 300 * really depends on if you need to replace a lot, Most times just pads, handles and a few things. , Change fluid, new carb ( 30 ), Lights (20) top end repair ( 15 to 300 * 300 is everything, Most times just a gasket set is all you need, Dry rot from sitting a lot of years.
Pretty much every one that I have ever picked up for free or for 100 or less has really only needed carb cleaned or replaced. They all ran for years with out many issues.
If I would do it today rather than years ago, I could have bought new parts and fixed them up nicer and resold them for a huge profit.
Yet the market is trashed today because you can go out and buy a fairly nice tao tao quad for 700 bucks and up, may not be a 250 yet they run pretty good.
It deserves at least a good wash, a scrub and a polish!
“And WHOOOOO in da tar nation whinded up this TWIIIIIIIIINNNEEE!!!!!” That was funnier than hell!
Yes sir I about died
28:31 two days later still dying. Who’s gonna ...FEED DEM HAWWWGS?!
Really enjoyed your video, I needed something relaxing and light hearted right now. I’m a fan of anything with an engine that you can ride. Thanks for sharing.
man i have no idea how this channel came across my feed but i'm sure glad it did. you guys are great! funny, informative, educational. you have it all!
Thanks, glad you like the videos!
Stopped what I was doing when I got this. Love the content. Keep it coming.
"The sunlight glistening off your forehead...." that one almost killed me
Love the way you analyse and solve a problem. Very clever and logical. I have smaller 3 wheeler with what I think is an ignition problem. I'm heading out to the garage loaded with ideas!
I don't know how this ended up on my feed, but I'm sure glad it did. I thoroughly enjoyed the process of you troubleshooting and eventually starting it! Great job!
Hey, I just wanted to let you know that this upload literally made my day. Keep your family and yourself first but always remember how much we all appreciate your uploads.
Glad to see the new place and see you guys in happy spirits!
Miss y’all!
Merry Christmas!
Thanks to this video I just got my 4 wheeler running. I'm still learning alot but you have helped so much. I'm now a subscriber! Thanks
I am a HUGE Honda 3 wheeler guy. I have 27 of them...I Thoroughly enjoyed this video and watching you bring that old bird back to life! I subscribed too, thanks for a great video. You and your wife make a great team.
Made my night when I saw this video pop up. Great video glad to see you guys again hope there’s more to come!!
My soul feels like the inside of that float bowl when Jennie's Garage hasn't uploaded a video in a while.
I just found your CZcams channel and I ended up binge watching 10 episodes. I have to say I absolutely LOVE your channel. You both do a great job making these videos fun and informative. Keep up the GREAT work. You have a new subscriber in me. Look forward to catching up on older videos and new the next new ones to come!
I have over 11 trikes now in my collection, Hondas never fail! Amazing video it made my night watching it, no swear words at the trike, no hacking, just a good ol manual and fixing! And it started!! 3rd pull!! Amazing video. Subscribed !!
I want y'all in my corner when the the zombie apocalypse comes around!
Imagine the neighbours looking and this guy is trying to plow his back yard, whit a old tree wheelerand and a rusted out trailer frame.
And with that last line I subbed, look forward to checking out more vids. Love the family working together, the comedy and the sharing of experienced knowledge!
PUBLIC SERVICE ANNOUNCEMENT PLZ STOP SCRAPING THE THREE WHRELERS they bring money on FB market place not a ton for rough ones but more then there weight in steel parts are getting harder and harder to find. great video 👍 glad you got the ole 200s back in service.
Welcome back camera girl😘
Did I hear a little AvE in there?
“A little tappety...tap...tap....”
This Honder is wayyy Skookem.
Pretty sure, the tap dancing instructor, kept saying it to lisa Simpson, when she was trying to learn how to tap dance. When she was learning how to tap her shoes, that's where I heard it from. Over 10 years ago.
I can't stand that guy. Way overdoes It.
Love the humour and obvious love you and your family have for projects and your channel. Much love
This dude is a genius with small motors. Amazing how good he is with this stuff and how he knows right what to look for
Yes! My favorite family!
thank you!
"Lets look in the garbage to see if there are any parts to fix this motor" Hilarious, Macgyver!
glad to see you back ,merry christmas, and a very happy new year,, from bolton in uk..
I love these videos because I can test myself. Had this machine diagnosed correctly from the very beginning. Very fun to watch thanks for uploading!
I can't believe I found you by searching 'how to cut your own hair'! My favorite channel! Merry crimbo :)
I love ur vids u need to make more man I click it as soon as it comes up and I know a lot of others do too. U can make anything run
Thank you!
Jennies Garage ur welcome I wish I was closer to u guys I have a warrior that I repair all the time and I watch urs for help lol
Keep me coming buddy. We appreciate your hard work and commentary. Always makes me laugh, thanks
I don’t know why I love this channel so much or how I’ve even found it but thank you so much for the content.
30:34 “Burns a little oil... burns a little oil...”
Smokescreen engaged! 🤣🤣🤣👍🏻👍🏻👍🏻
Honestly this is a fantastic intro to internal combustion engines. Check fuel, spark, air. Then go deeper.
Keep up the great work!!
Lovely, I stayed up extra late for this, glad I did.
That's a cool old atv you guys got there, glad to c someone bringing it back to life and enjoying it, I have a 1984 Yamaha yfm200n atv, it burns oil just like yours, but mine has started up every single time, even when it's 5 degrees outside, they don't make them like they use too, enjoy it. , and be safe
You people are awesome, watching your video is the highlight of my day, never stop the great content.
Thank you!! I’ve enjoyed watching your videos over the last year or so, I hope you guys have a great new year, full of many free motorcycles
This is the kind of videos I love. Like camera girl said... like them more than just two steps!
The second I heard that noise I knew the cam chain was too loose. I automatically assumed it jumped time as well. I also assumed that’s why it was parked...lol. I love this channel...this is goals right here...husband and wife working on project bikes together.
man awesome video wish u did this 5 years ago when i bought one for 750 and had the same problem with the timing chain i couldnt find any good videos like yours and ended up selling it for 200 after driving for a year thanks again for video wish i knew mechanics like you do
Always so happy to see you post a video! Keep em comin! But make sure to take care of life first. Your fans will always be here
Hi sir, I'm an Injury Lawyer.....I see you're on a 3 wheeler.
cause as we all know, no one ever got hurt on a 4 wheeler
@@999benhonda the big red is a notorious death trap lol
@@tomhysmith835 Right? I have one in an barn now that won't start because the cam chain somehow twisted/kinked because it wont turn over at all. I nearly pulled my shoulder out of socket thinking it was the starter when in fact...it wasn't the starter, and I tried to pull-start. Lol
Dude, I gotta admit that the anticipation built up and when that thing fired up I was hella 😜 excited. That was awesome 👏
I learn so much from these videos everytime i watch them. I started my own little gig by working on bikes. All the unusual diagnostics or figuring out what may be wrong with a bike come from here. Like someone brought in a ltz400 and it was making a "breathing noise" from the airbox just like this one and it was an intake valve that was way tight.
Yayyy!! I love it when you get new stuff. Keep going. 🤘🤘
Dam it, can only give 1 like.
Feel like CZcams finally recommended me something worth to watch, good job !! You both sound like a happy couple, made me feel like when I'm outside puting something together and my wife brings me a lemonade ahhh !! 🤝👏👏👏
I grew up on three wheelers. First a 1983 ATC110 and later a 1984 ATC250R. Wish I still had that 250R! Great video - it brought back a lot of memories.
She clearly said she wanted to ride. Stop clowning around and take her for that ride guy.
well it depends what kind of ride she wants
@@i-will-trigger-you oh SNAP! More comedy in comedy central where you get what you paid for
I had a smile on my face the whole time I was watching this
Dark Lord same😂
Just like the timing cover
I had a 200s and I’m pretty sure your video just diagnosed the problem I had with it. Skipped teeth on chain... wish I saw this video 10 years ago 🤦🏼♀️. Really comedic video, I’d say I’ll subscribe
after watching all of youre fixing motorcycle videos and stuff like 2-3 times ive learned alot about fixing bikes and i know how to fix alot of things now on bikes. great content and entertaining
Your determination is amazing!
when you get a jennies garage notification there's no time to waste.
You are more than right
Your videos are just the best. Sooo entertaining, keep up the awesome work and vids!
I love you guys, step by step good teaching with a mixture of clean humor. And always happy Camera Girl. I learn quicker from your style of teaching, with a chuckle here and there. 100 thumbs up you two, oh and your son also.
The amount of resourcefulness is admirable.
WHOS GONNA FEED DEM HOOOOOGS?!!
Andrew Cox norm MacDonald joke
Spent hundreds of hours on that exact model, the 200s, as a young man. The sound of it running brings back fond memories.
I’m currently making a video log on my quad build, thanks for showing your love to the Honda AtV world. Keep up the great content!
I would PAY you on patreon to keep this three wheeler!