Love the P38 George 👍 I’ve had mine for nearly 12 years now and drive it daily. I bought a leather dye for my steering wheel called ( LCD all in one dye and cleaner)and it looks like new again. I did mine about 6 years ago and it still looks like new. It will save you a lot of money providing that the leather is just very dirty ( Not torn or damaged) show us the results 👍 Please tell Mrs Powerful that the website is fab 😍👍
Thanks for the comments Mark - I will look at the leather dye / cleaner. Glad you like the new look website... Ben helped a lot with the grpahics too !
I think is the going to be the safe bet...we did look at making the grille different colours on each face... but this got too complex masking / painting etc
Great products. Defender winch, install the winch hook on the left hand side, would look ok. Winch reset button grill, add a recess top and bottom so it just springs into place and add a little lanyard so it doesn’t get lost in the grass/mud. Storage of all these little clips costs you money. Can you look at an A pillar (passenger side) grab handle for older Defenders as the billet ones are over the top. I’m also looking for a nice enclosure for the marine sockets with the flip cover so that it can be stuck on the back panel or MUD side panels. Cheers
Lots of good ideas men!! The Lunch Box interior molle plate…I would choose bright orange to look a bit like a tool rack fitting…dare I say it could look a bit like the plastics made by Von Haus who sell tool boxes, racking etc…the colour makes it easy to see things attached etc. The 90 front cover…don’t forget a carbon fibre look for the style buyers! Another mad idea…when you swap the 90, how about a Hard Top version next time so that you could develop interior fittings for people using them genuinely for work…vets, farriers, garage mobile workshop, racking, dividers etc…Zak could make that his next project!! I’m catching up on videos…I was away last week! good work men…keep thinking of new ideas! 😃😃😃😃😃Richard
I want to see some accessories painted in AA yellow 😊. The top tether clips behind the rear seats are still used for child seats after a certain weight.
With Isofix seats, either top tether or the very big leg is mandatory Simon. Top tether prevents any chance of the seat tipping forward or, even sideways in a crash.
@@L663Hello Simon….that removable circlip, thinking of wet, mud and gloves, would it be an idea to tether it to the mounting in the way that a petrol cap is held so that you can’t lose it in the mud?…..and I would make it bright orange for the same reason….dropping it in mud might be hard work to find it again! 😃😃😃Richard.
Are the hole centres on the grab handles the same as the disco 4? Internal molle plates for the D4? Keep up the good work, great to see small businesses developing products and supporting their customers.
Giday Simon…… re the knob on the 110 defender to secure the winch hook…… why not off set the knob to the left or right of the bull bar so that the cable doesn’t interfere with the camera that is in the centre of the vehicle!!!! Also do you think that the P38 will become a “classic “???? Further the side pods on the 90…. makes the vehicle look like it’s wearing headphones!!!! Brill video!!!! Regards ian 🇳🇿👨🎤🏉👍
Love the headphones... maybe i should make some "beats" logos for them ! P38 is already a classic and the 30th anniversary model must be one of the ones to collect. Offset winch mount would work but its asymmetry would stress me !
Wait a minute, do y'all make a MagSafe iPhone mount for the defender? The defender front bumper cover is a great idea, I don't want to drill into the front of my bumper to put a bump shox on.
I think you need to look at the yankum ropes fairlead design, as used by Matts off road recovery, a popular CZcams channel. A far better and neater stowage design of your winch cable/rope.
Grab handles look dangerous for off-roading they could possibly split your head open they look to rigid and do not fold away like the Land Rover original ones.
@@L663 Colorado wing fairing company has designed pre bend bracket, but it still requires drilling, I wish we can utilize the existing bolts on the rack wind dam, and design two more angled brackets which avoid drilling, definitely looking forward to it
@@L663 In the U.S., the prices of many Hummer H2's in better than average (semi-restored) conditions have been appreciating ($75-100k). 2008-2009 H2's are the most sought after, with special edition colors & SUT's commanding the highest prices.
Its a point to consider - but the parts are plastic - not metal. Also i think you head is still a fair way from the handle - but we will look at this again.
P38 handsome car 👍🇬🇧👍
Knitwear season? Sounds like an advert for a range of Powerful UK Xmas jumpers!
Knitwear is just like a dog.... its not just for xmas !
Looks like Princess Leia with her buns that 2 lunch box set up :)
I guess you are referring to her hair buns....
Another good video Simon 👍👍👍⭐️⭐️⭐️👏👏👏👏
Glad you enjoyed it
Love the P38 George 👍 I’ve had mine for nearly 12 years now and drive it daily. I bought a leather dye for my steering wheel called ( LCD all in one dye and cleaner)and it looks like new again. I did mine about 6 years ago and it still looks like new. It will save you a lot of money providing that the leather is just very dirty ( Not torn or damaged) show us the results 👍 Please tell Mrs Powerful that the website is fab 😍👍
Thanks for the comments Mark - I will look at the leather dye / cleaner.
Glad you like the new look website... Ben helped a lot with the grpahics too !
@@L663 well done Ben and Mrs Powerful, great job done 👍👍
winch access grill OEM colour to match grill with contrast clips (maybe all paint colour options).
I think is the going to be the safe bet...we did look at making the grille different colours on each face... but this got too complex masking / painting etc
Great products. Defender winch, install the winch hook on the left hand side, would look ok. Winch reset button grill, add a recess top and bottom so it just springs into place and add a little lanyard so it doesn’t get lost in the grass/mud. Storage of all these little clips costs you money. Can you look at an A pillar (passenger side) grab handle for older Defenders as the billet ones are over the top. I’m also looking for a nice enclosure for the marine sockets with the flip cover so that it can be stuck on the back panel or MUD side panels. Cheers
Mole plates for the windows of the rear doors of the 110. For camping that would be so useful.
11:38 looks good in cardboard brown
Lots of good ideas men!! The Lunch Box interior molle plate…I would choose bright orange to look a bit like a tool rack fitting…dare I say it could look a bit like the plastics made by Von Haus who sell tool boxes, racking etc…the colour makes it easy to see things attached etc. The 90 front cover…don’t forget a carbon fibre look for the style buyers! Another mad idea…when you swap the 90, how about a Hard Top version next time so that you could develop interior fittings for people using them genuinely for work…vets, farriers, garage mobile workshop, racking, dividers etc…Zak could make that his next project!! I’m catching up on videos…I was away last week! good work men…keep thinking of new ideas! 😃😃😃😃😃Richard
I want to see some accessories painted in AA yellow 😊. The top tether clips behind the rear seats are still used for child seats after a certain weight.
With Isofix seats, either top tether or the very big leg is mandatory Simon. Top tether prevents any chance of the seat tipping forward or, even sideways in a crash.
Interesting things must have changed since George and Elise were tiny !
You could always mount the winch mount on the left or right of the bumper, that would keep the rope out the way as well 🤙
Good point but the asymmetry.... also centre is best place for access from either side - but it is a good solution.
@@L663Hello Simon….that removable circlip, thinking of wet, mud and gloves, would it be an idea to tether it to the mounting in the way that a petrol cap is held so that you can’t lose it in the mud?…..and I would make it bright orange for the same reason….dropping it in mud might be hard work to find it again! 😃😃😃Richard.
Are the hole centres on the grab handles the same as the disco 4?
Internal molle plates for the D4?
Keep up the good work, great to see small businesses developing products and supporting their customers.
Hi John - that is an interesting idea - let me check if its the same pitch on the interior handles...
Knitwear season? Oh no, not your Christmas jumper! Winter draws on..........
I have more than one festive festive jumper !
@@L663
would like the front cover in gloss black.
Yes I think this will be the most popular item.... styling / protection in one simple product !
Should do more parts for the Merc Sprinter, big community moving these vehicles?
Giday Simon…… re the knob on the 110 defender to secure the winch hook…… why not off set the knob to the left or right of the bull bar so that the cable doesn’t interfere with the camera that is in the centre of the vehicle!!!! Also do you think that the P38 will become a “classic “????
Further the side pods on the 90…. makes the vehicle look like it’s wearing headphones!!!! Brill video!!!! Regards ian 🇳🇿👨🎤🏉👍
Love the headphones... maybe i should make some "beats" logos for them !
P38 is already a classic and the 30th anniversary model must be one of the ones to collect.
Offset winch mount would work but its asymmetry would stress me !
Wait a minute, do y'all make a MagSafe iPhone mount for the defender? The defender front bumper cover is a great idea, I don't want to drill into the front of my bumper to put a bump shox on.
I think you need to look at the yankum ropes fairlead design, as used by Matts off road recovery, a popular CZcams channel.
A far better and neater stowage design of your winch cable/rope.
Their fairlead is designed for rope rather than steel wire rope.
Also with a soft shackle eliminating Ann metal in the winching process.
twstatic.net/attachments/upload_2022-8-5_12-30-13-jpg.5115718/
looks neat but its still underwater if you are in a puddle !
Simon
When will you get the Gloss black ,front lower bumper cover?
Have you thought about a Ford Raptor?
Grab handles look dangerous for off-roading they could possibly split your head open they look to rigid and do not fold away like the Land Rover original ones.
Please design a non drilling wind fairing for expedition roof rack
We did look at this - but.I lacked inspiration... need to look again...
@@L663 Colorado wing fairing company has designed pre bend bracket, but it still requires drilling, I wish we can utilize the existing bolts on the rack wind dam, and design two more angled brackets which avoid drilling, definitely looking forward to it
Simon
How's about a good Anti Theft device ???.
Maybe lock the Drivers Seat forward position so a Thief cant drive it.
Looking at this right now
That grab handle looks like a head injury waiting to happen in an accident or off roading terrible idea
Decided against swapping for a 75th in the end Simon?
Yes i was tempted but stuck with the black 90 !
❤❤👌👌🙏🙏
Hope you enjoying visiting family Mr Virdi !
@@L663 thanks 🙏
Wish you guys did Hummer H2 parts & accessories
There is a Hummer being wrapped in our old workshop unit...
@@L663 In the U.S., the prices of many Hummer H2's in better than average (semi-restored) conditions have been appreciating ($75-100k). 2008-2009 H2's are the most sought after, with special edition colors & SUT's commanding the highest prices.
Were has the disco 4 gone?
Its in the new garage.... but more to come on that... it flooded with the rain last week so we have now fitted a pump,, only 4" so the cars are fine !
When you bash your head on one of those grab handles you will be sorry.
The interior handle looks dangerous, hit the brakes hard & your head is going to smash into the handle. They’re recede for a reason.
Its a point to consider - but the parts are plastic - not metal. Also i think you head is still a fair way from the handle - but we will look at this again.
You need to check out videos of dummies in crashes with seatbelts on, you still fly about like a rag doll in a crash.
Boom Boom!!
Was just talking about you the other day... we have a new tenant who does horse riding clothing etc
www.flying-changes.com/
Have you considered doing stuff for the VW transporter t6.1? and the camper versions...
Big market... but we thought we will try the Buzz
Second 😀
🏅