Those 2 guys sure have a lot of time to be showing how to test. I never had time I was always working just saying no hating. They did a good job 👍. Keep up the good work. If you ain’t burning you ain’t earning ✌🏼
What Grade of Pipe were you welding on Grd. 483 (x70)? If it was grd. 483 via procedure you would weld 8010-G all the way through in Canada . Running a bead 8010-g is possible and easy if you know the technique . 375 wall 5/32 for the bead 3/32(2mm) land 3/32space . To alleviate under cut with a lincoln 200 run third gear. lower amps and higher volts . Carry a half of a key hole .travel rate one whole rod to about 3/4length of rod 14 inch rod 9-10 inchs of travel . Reason for under cut is 8010-G is a fast freezing rod . travel to fast on the bottom half rod metal does not have time to blend in properly . Done it for 20+ years on big inch pipe
80 mil libras d resistecia x pulgada cuadrada y es applicable en todas las posiciones y mecuona los componentes d la varilla. Es para un process mas rapido en su aplicacion y d acuerdo al codigo API 1104 .tienes 2 pulgadas d inperfeciones x cada 12 pulgadas d soldadura... estos dos mecos tardaron mucho en el fondeo..
@@johnsassano8728 thts dumb, an if u do tht shit on any gas company property ive ever welded for they WILL get your money, like rite now im up in Minnesota on the enbridge line 3 we buildin an they told us if anybody is caught speeding or driving "reckless" we are run off!
Hey Guys, real good you guys know what your doing OK But the music sucks,you need to hear the rod sound when your burried in the hole running beads,just what Beadhands do.
Of course you don’t show the bottom. And your comment about blowing through, you can’t do that on a test. Unless they don’t see you do it and you fix it.
Of course it’s 956 welders. Y’all think y’all’s shit don’t stink. Y’all run a mafia out here in midland/odessa area. Doesn’t matter if y’all can weld or not. Y’all also are screwing up the wages for us old timers that have been in the game longer than y’all have been alive.
Good job gentlemen. Get that camera guy a zoom lens or a leather shield for his camera. He needs to be up in the pool.
Nice work , simple and clear
Those 2 guys sure have a lot of time to be showing how to test. I never had time I was always working just saying no hating. They did a good job 👍. Keep up the good work. If you ain’t burning you ain’t earning ✌🏼
Slick beads! I like the spacer, T is probably better than just a strip.
BEAUTIFUL JOB ON THE CAP,THE SIDES JUST FEATHERED IN,REALLY NICE.
You guys are awesome keep up the good work, that cap looks very slick! Keep doing what you guys do well!
you guys Rock....thanks for making and posting....cheers from Florida
Clean welding and nice music
Great video. 👍🏽👍🏽
Keep it coming
Leche con pan, very helpful thanks...
Great job guys👍
badass. yaw did amazing job, keep stacking baby
excellent job !!
I run a 200d.. was the hot fill done in 3rd also? in addition to that what was your gear and fine current adjustment for the cap pass?
Notification gang 🔥🤙🏼
Awesome job guy
شكرا
Wooooow 😎🤟 nice work
Which one of you guys can give me some advice for the API 1104 test
What Grade of Pipe were you welding on Grd. 483 (x70)? If it was grd. 483 via procedure you would weld 8010-G all the way through in Canada . Running a bead 8010-g is possible and easy if you know the technique . 375 wall 5/32 for the bead 3/32(2mm) land 3/32space . To alleviate under cut with a lincoln 200 run third gear. lower amps and higher volts . Carry a half of a key hole .travel rate one whole rod to about 3/4length of rod 14 inch rod 9-10 inchs of travel . Reason for under cut is 8010-G is a fast freezing rod . travel to fast on the bottom half rod metal does not have time to blend in properly . Done it for 20+ years on big inch pipe
So this being a texas bell hole position, does that mean there ate 49 more positions? Can you show those other state positions?
Is there a page in the blue book that will help with practicing the bell hole test ?
Good performance I salute you all
Yall should do a video of a walk around the those looking rigs and all the tool to carry
Nice trucks brothas.
Good video what size of gap y’all use
Sweet ....
Chingao that cap came out badass.
Bro what’s hanging from the bottom of the trucks ???
I would like to learn personally like go to yall shop and get trained there
nice rigs
God I don’t miss the back grind burns.....
Nice work. But i dont understand how many amps do you use for the root , hot and cap pass. Thanks and keep goin
Just run it
WHEN I WELD PIPE DOWNHILL AND BURNING 5/32 ROD AND 3/16 ROD,I GO BY LOOKS AND ESPECIALLY FEEL,I CAN FEEL IT IN THE STINGER.
Why does it say bell hole if y’all welding in a shop and not the ditch?
Que propósito tiene la 8010 ?
80 mil libras d resistecia x pulgada cuadrada y es applicable en todas las posiciones y mecuona los componentes d la varilla. Es para un process mas rapido en su aplicacion y d acuerdo al codigo API 1104 .tienes 2 pulgadas d inperfeciones x cada 12 pulgadas d soldadura... estos dos mecos tardaron mucho en el fondeo..
Love it, I'm in San Antonio Texas, how can I start welding?
Join the union
@@Esquivelhead which union?
BAD ASS BRO! WE STILL OUT HERE!!!! #SUPREMETEAM
Do you or anyone you know need a helper?
Привет.
Y si los hacen Spanglish?😅
Hello sir
No one shows bead.. agian.
A "texas bellhole"??? Whats the difference between a texas bellhole and a regular bellhole????
Swanging to the test 🤣🤣
@@johnsassano8728 what?
@@beaugodwin7306 the way they were swerving their rigs back and fourth to the shop in the video
@@johnsassano8728 thts dumb, an if u do tht shit on any gas company property ive ever welded for they WILL get your money, like rite now im up in Minnesota on the enbridge line 3 we buildin an they told us if anybody is caught speeding or driving "reckless" we are run off!
@@johnsassano8728 so just a tip don't do tht shit in the field lol
Hey Guys, real good you guys know what your doing OK But the music sucks,you need to hear the rod sound when your burried in the hole running beads,just what Beadhands do.
Of course you don’t show the bottom. And your comment about blowing through, you can’t do that on a test. Unless they don’t see you do it and you fix it.
Y’all can also check out my boy @lws Luna welding school 🤟🏼
Todos con raíces latinas y no hacen videos en español latino
Of course it’s 956 welders. Y’all think y’all’s shit don’t stink. Y’all run a mafia out here in midland/odessa area. Doesn’t matter if y’all can weld or not. Y’all also are screwing up the wages for us old timers that have been in the game longer than y’all have been alive.
Not for nuclear industry… that type of wire is not allowed on site ..
Hey I found the Biden supporters!