C-10 WIPER ARM REMOVAL

How to Quickly and Safely Remove the Wiper Arms on your Classic Vehicle.
1968 GMC Wiper Arm Removal.
Wiper Arm Removal Pliers: amzn.to/38HNQ6o
____________________________________________
Thanks for watching!!
Please Subscribe!
Please checkout my Amazon List (Store) to find all the Tools and Parts I use in the shop!
These Amazon items help support the channel and add no extra cost to you. Thanks for Shopping.
www.amazon.com/shop/allisoncu...
T-Shirts available:
Send $20 each or $55 for 3 to:
PayPal - [e-mail]
Get all the up to date info on Facebook. / allisoncustoms
AllisonCustoms.com
[e-mail]
Intro Music By:
Boston Rocks - Provided by StoryBlocks Audio
Open Highway - Silent Partner
Jon's on Fire - Silent Partner
Bustin Loose - Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/

[@joeymclaughlin1264]

Very clear and helpful! Thanks! Subbed

[@7008aspen]

Best wiper remover video thank you

[@AllisonCustoms]

Thank you!

[@Dekkayrd]

Thank you SO much, I couldn't figure out how to release the arm on my 84 el camino and luckily I had a small hammer that worked perfectly for lifting it off!

[@AllisonCustoms]

Happy to help!

[@qpappliances]

Thank you

[@AllisonCustoms]

You bet!

[@ronringel9132]

Nice tip. Thanks for sharing.

[@AllisonCustoms]

Thanks for watching!

[@tokslut]

Thanks!

[@alfonsosanchez7052]

Thanks 👍 very helpful 🤠

[@AllisonCustoms]

Thanks for watching - glad it helped!

[@jedk9523]

thank you for this

[@AllisonCustoms]

You bet!

[@ct1227]

Dude you rock thank you sm!

[@AllisonCustoms]

No problem!!

[@bradb7371]

thank you so much for this video

[@AllisonCustoms]

Glad you found it useful!

[@henrysanchez4471]

Good video. Thank you. I've got a '55- 3100 Chevy truck with the same design wiper arms. I'm curious about that spring that's inside of the arm. ( I know that it's for tension ) & I see that the bracket that the spring hooks on to has an extra hole. What is the purpose of the extra hole? Is it for the wiper to press more on the windshield? Would there ever be a need to use the other hole?
Thanks again,
Henry

[@AllisonCustoms]

I don’t know, but I would imagine that the extra hole is for some other vehicle that needs different spring pressure to hold the wiper blade to the windshield. Interesting question, I hadn’t even noticed it was there.

[@sbergum383]

Any tips on replacing the spring on the wiper arm?

[@AllisonCustoms]

Not really. I have removed and replaced them after powder coating or rechroming, but I have always had the original spring to reinstall. I don’t think I have ever even gone looking for a replacement spring. Sorry.

[@tim1299]

That is my arm, but i have seen an arm where clip is on the outside-top (not underneath). Easily seen and you pull the clip out , but not completely.Same blade attachment to arm. Any idea what year that arm would come off of?

[@AllisonCustoms]

Not really. Good luck! Maybe someone else can comment with an answer.

[@williamcrazylacyfurmage9953]

What's the trick to getting it back on with all that tension. I got a pinto, same dill going on

[@AllisonCustoms]

Usually I find folding the wiper arm into the up position can help, but make sure you have it lined up correctly, or you’ll be starting over

[@mr.the-edmeister2750]

Windshield Wiper Arm Remover Pliers
www.amazon.com/Windshield-Wiper-Arm-Remover-Pliers/dp/B00NEUDIPC
www.autobodytoolmart.com/windshield-wiper-arm-removers-p-11763.aspx
I have a similar tool from K-D Tools that I got back in the late 1960's when I was working at a "service station", but no vinyl sleeve for the lower jaw which comes into contact with the cowl.

[@AllisonCustoms]

Thanks for sharing!

[@tim1299]

CZcams link to the arm I mentioned. I think the blade attaches to a "Pin"
czcams.com/video/vVLnxyognJM/video.html thanks Tim

[@AllisonCustoms]

Thanks, I’ll take a look.