Was pretty frustrated…..seems the only thing my brain could think of was to pull the drawers harder and shake them simultaneously. Looked for a video and yours exactly what I needed! Thank you so much for being empathetic and considerate of others who are experiencing the same frustration as you! 👊
Solved my problem! The swing door at the bottom just needed to be pushed back all the way, and it lifted the locking bar with the tabs. One drawer had been locked shut. So, with the swing door at the bottom pushed back all the way (with five slide drawers above), I pulled all five drawers out an inch or so, so that they were clear of the locking tabs. Then, I pulled the swing drawer forward a few inches, and heard the locking bar with the tabs fall to its "locked" position. Now I can open and close all the drawers without them locking each time. If any get locked again, I will remember to push the swing door all the way back to lift that locking bar again! Yay! Thank you!
I owe you a 6 pack my friend. Just saved me from another hour of getting my drawers out. What an I’d feature. Only seemed to hold half my drawers closed haha
I took possession on my dad's craftsman tool chest last year and two months ago some of the drawers locked up. I've been tugging on them for weeks. A minute after seeing your video and now they are open. The locking bottom door front was the trigger to move the locking bar. Thanks so much for taking the time to post your video.
Thank you sir! In 2 uses - 3 drawers locked up on me. Your suggestion fixed it immediately. Im sure my wife thanks you too for me not trying to convince her I needed a new box!
Thanks for sharing. I have a toolbox that I have not been able to get open for years because I couldn’t figure out what was going on and holding it in place. Gonna give this a try.
Thanks for sharing! I got one of these for free. I had already put all my tools inside, when the mechanism locked and got stuck! You saved me some serious frustration.
Was wondering how these old boxes locked up since I noticed that the key lock were on the bottom of the box. Now I understand how the locking mechanism works. Many thanks👍
fantastic video bud, i was given one of these for free and everything opened fine, drug it across the floor of my garage (bc it too is missing its wheels) and the damn thing latched and wouldnt open.... was driving me crazy... thanks for the help!
I have a toolbox like that. The bottom section has a door that's hinged on the top. In order to unlock the drawers you have to lift open the door and slide it all the way in. That releases the locking mechanism. Mine has the opposite problem where it stays unlocked.
Hey Dan, I have my dad's old Craftsman toolbox with the same drawer glides I see in your video. I had to remove a drawer because a hammer in the drawer below was keeping me from fully closing the drawer I removed. How did you get those clips back on?
Ok... Hope it works out..... I didn't realize before I made the video... The drawers locked even though the lock and looked like a few other things were missing ......
I have a problem with my newer Craftsman tool box's bottom drawer, it is stuck as well. I got it over 5 years ago, and now the bottom drawer won't open.
I'm no expert on these tool box's... I would take out a few drawer's out of the top and see if something is stuck in the track... Or like what happened in my video.... Good luck
Was pretty frustrated…..seems the only thing my brain could think of was to pull the drawers harder and shake them simultaneously. Looked for a video and yours exactly what I needed! Thank you so much for being empathetic and considerate of others who are experiencing the same frustration as you! 👊
Solved my problem! The swing door at the bottom just needed to be pushed back all the way, and it lifted the locking bar with the tabs. One drawer had been locked shut. So, with the swing door at the bottom pushed back all the way (with five slide drawers above), I pulled all five drawers out an inch or so, so that they were clear of the locking tabs. Then, I pulled the swing drawer forward a few inches, and heard the locking bar with the tabs fall to its "locked" position. Now I can open and close all the drawers without them locking each time.
If any get locked again, I will remember to push the swing door all the way back to lift that locking bar again! Yay! Thank you!
I owe you a 6 pack my friend. Just saved me from another hour of getting my drawers out. What an I’d feature. Only seemed to hold half my drawers closed haha
Good job man, this really helped me out. Now just have to figure out how its supposed to sit so the drawers don't lock up every time I close them!
I took possession on my dad's craftsman tool chest last year and two months ago some of the drawers locked up. I've been tugging on them for weeks. A minute after seeing your video and now they are open. The locking bottom door front was the trigger to move the locking bar. Thanks so much for taking the time to post your video.
Thanks for sharing. I WAS GIVEN SAME TOOLBOX BY A NEIGHBOR
Thanks for this... Helped us get the bottom drawer unstuck..!
Thank you! You just helped me save my husband's "new" set of drawers!
Three years later it still works, just opened up my old craftsman box top drawer sticky got it to work thank you
Thank you a ton, I couldn’t figure it out. It opens now. Thanks buddy.
Thanks a million .... I was at the “junk it” stage of frustration when I found your video. Worked like a champ.
Your Welcome in glad I could be of help..
You are the man!!! My socket drawer has stuck for months, thank you so much, god bless.
Thank you sir! In 2 uses - 3 drawers locked up on me. Your suggestion fixed it immediately. Im sure my wife thanks you too for me not trying to convince her I needed a new box!
Bro you just saved me so much time. Thank you!
Thanks for this video. Had no idea how to proceed until seeing this.
Thanks for sharing. I have a toolbox that I have not been able to get open for years because I couldn’t figure out what was going on and holding it in place. Gonna give this a try.
You sound like Ron Swanson from Parks and recreation! Awesome
Thanks for sharing! I got one of these for free. I had already put all my tools inside, when the mechanism locked and got stuck! You saved me some serious frustration.
You're welcome..... I'm glad to help
Thx so much mine was locked for more then a year and I needed something out of it. SOOOOOOO THANNNNNNKKKKKSSSS ALOT
Thanks for the video. I got my top drawer unstuck...YAY!
Good.... Glad I could help
Was wondering how these old boxes locked up since I noticed that the key lock were on the bottom of the box. Now I understand how the locking mechanism works. Many thanks👍
Nicely done. Thanks!
Exactly the same problem, thank you for sharing and for safe my free junk tool box
fantastic video bud, i was given one of these for free and everything opened fine, drug it across the floor of my garage (bc it too is missing its wheels) and the damn thing latched and wouldnt open.... was driving me crazy... thanks for the help!
Thanks, your video helped me "unstuck" one of my drawers.
Your Welcome..... Glad to help
Thank you for the video, got all the drawers to open again
Happy to help
Thanks you for sharing this video,,👍👍👍
Thanks for this video. It helped me solve this exact issue.
It's a locking mechanism for the bottom door. When the door is closed it locks the drawers.
Thank you so much!
Thank you. I tried everything & considered scraping.
How simple it was.
lifesaver man! thanks
The 52 inch box has a reinforced bottom plate where the castors bolt into. So its like a double sheet looks good to go.
thanks for the video, it helped me a lot
Glad to help
Thanks buddy
muchas gracias
I have a toolbox like that. The bottom section has a door that's hinged on the top. In order to unlock the drawers you have to lift open the door and slide it all the way in. That releases the locking mechanism. Mine has the opposite problem where it stays unlocked.
Hey Dan, I have my dad's old Craftsman toolbox with the same drawer glides I see in your video. I had to remove a drawer because a hammer in the drawer below was keeping me from fully closing the drawer I removed. How did you get those clips back on?
How do you get the drawers out all together? Something stuck between the drawers
This also works with large Pro cabinet boxes, except the top lid unlocks the box when it is lifted. 🧐
Having a problem with the top two drawers on my older Craftsman tool box. Gonna check this out.
Ok... Hope it works out..... I didn't realize before I made the video... The drawers locked even though the lock and looked like a few other things were missing ......
I have a problem with my newer Craftsman tool box's bottom drawer, it is stuck as well. I got it over 5 years ago, and now the bottom drawer won't open.
I'm no expert on these tool box's... I would take out a few drawer's out of the top and see if something is stuck in the track... Or like what happened in my video.... Good luck
So if worse comes to worse ill just cut the whole backside out? 😂😂😂 wish me luck