⚡ Pride Mobility Scooter Not Working? Analyzing Beep Codes and Troubleshooting
Vložit
- čas přidán 5. 07. 2024
- Is your Pride Mobility Scooter Beeping? Will your Go GO scooter or Victory not work? Here is a guide on how to do the basics when troubleshooting your Pride Mobility Scooter. For more great videos like this video and subscribe to our channel. Visit MobilityDirect.com or call us at 877-721-7748 thanks for watching.
Pride Mobility Beep Codes
■ (1)
Battery voltage is too low to operate the
Travel Scooter.
Charge batteries as soon as possible.
■■ (2)
Battery charge is too low. Charge batteries.
■■■ (3)
The Travel Scooter’s battery voltage is too high
to operate the scooter, or the charger is still
connected to the off-board charger port.
Unplug charger and/or turn key off, then back on
again. If traveling down a slope, reduce Travel
Scooter speed to the minimum setting.
■■■■ (4)
Current limit time out. Turn the Travel Scooter off for a few minutes,
then turn your Travel Scooter back on.
■■■■■ (5)
The manual freewheel lever is in the (forward)
freewheel position.
Remove the key from the key switch, then
push the manual freewheel lever to the drive
(rearward) position and restart your Travel
Scooter.
■■■■■■ (6)
Throttle control lever not at center position at
start up.Verify that the batteries are fully charged. If
the batteries are fully charged, then return the
throttle control lever to center position, turn
Travel Scooter off then back on.
■■■■■■■ (7)
Speed pot error. Contact your authorized Provider for assistance.
■■■■■■■■ (8)
Motor volts error. Contact your authorized Provider for assistance.
■■■■■■■■■ (9)
Other internal errors. Contact your authorized Provider for assistance.
If you are looking for parts and accessories for your Pride Mobility Scooter visit out website www.mobilityscootersdirect.co... - Zábava
A scooter was given to me without a manual. Very helpful and detailed. Thanks
Which scooter do you have? I could possibly email you a manual!
Thanks for sharing this video. It's like making the manual come alive.
You're very welcome and thank you for watching.
Your videos are wonderful. Simply stated.
Glad you like them!
Great video. Thanks for posting this as it will help a good number of people.
We're glad it will. Thanks for the support @keaveny63021!
Thanks Drew! I love you, thank you for all your info, with your help I fixed my scooter! I have subscribed and liked thanks 🙏🏻
I'm so happy to hear you were able to fix your scooter! Thank you for the sub! We love you too.
Great troubleshooting vid!
Thanks Liz! Keep watching and you will be a mobility pro!
Thank you so much for this video 😊
My pleasure 😊
superb assistance thanks
You're welcome! Thanks for watching :)
Great video! This is going to be very helpful to some customers at home!
Yes indeed! Thanks for your comment!
I have a Jazzy 2, I believe it's a 4 pin. Brand new batteries and works great except my joystick operators in reverse, meaning pushing forward on the joystick makes the scooter go in reverse and pulling back on the joystick makes the scooter go forward. Any ideas, can it be repaired at home?
Take a look at this post: www.mobilityscootersdirect.com/forum/topic/pride-jazzy-chair-runs-backwards/
Thank you for giving me a clue as to why my sister's unit isn't working. It has 8 beeps.
Glad this video helped! Thanks for watching our video and commenting! We appreciate the support.
This was informative. How do you fix the 3 beep, high voltage code?
It's not really easy to fix on your own and what we recommend is that you call your authorised Pride Dealer. Thanks for watching our video and commenting! We appreciate the support.
Hey guys, thanks for this awesome video. I have a question if you don't mind. I have a Pride Go-Go Elite Traveller Plus scooter that I let my friend borrow. When she returned it, I turned it on, it had full battery meter, but the batter meter would go down about half way as I was riding it. It then gave me 2 beeps. I believe it also gave me 3 beeps shortly after, but I'm not sure. I looked up the codes and it says it's low voltage (2 beeps) or high voltage (3 beeps). Low voltage is simple, just charge the battery, high voltage is 'take to the dealer'. Now, the battery meter was reading full charge or almost full charge when started. It rode, but also when riding, the battery meter would drop down to about half charge as I was riding it. The battery meter would return when I stopped.
I charged the battery to full and it seems to have fixed it, I don't get those beeps anymore, and I tried go up a hill, down a hill, over some bumps, etc.
Just curious what you think it might have been. Was it just a low battery even though the meter read full or plenty of charge?
Thanks.
Sounds like you may have a loose connection somewhere.
i just watched your video it was informative as there were errors that i didnt find while trying and failing to make the scooter go , there is no beeping when key turned on but scooter doesnt move . i tried unplugging in turn the brake , motor and throttle lever , i got the appropriate beeps but still not working when all plugged in . the voltage at the wiper connection is about 2,2 volts and goes up and down
as i press the lever but not operating brake or motor , anything else i can try before getting new ecu? , thanks ,andy.
Thanks for watching and commenting on our video. You can try checking on your batteries next if it really is not turning on. We have some troubleshooting guides relating to your battery here:
czcams.com/video/4jeQ5sQQTtM/video.html
If that didn't work, please feel free to call our non-commissioned sales expert at 888-263-5601.
@@MobilityDirect
thank you for reply , i did check batteries and they are ok , i have done more research and have decided to get new ecu , hopefully the correct one 🙂
I have had the four beat code and turned it off Is turned it back on in a couple of minutes and it worked fine
Glad that it worked fine Mike. Thanks for the support by watching our video and commenting! We appreciate it.
Hi, hope you can help, can’t afford to take wheelchair to dealers, it’s a Pride igo electric wheelchair with the two slot in lithium batteries, batteries showing full charge, but power on, then nothing works, after a minute, I get two long beeps and one short one?
I suspect the joystick, as it’s been out in the rain, but it looks ok inside.
Any ideas what it may be ?
You'll want to refer to the manual to check what those beep codes mean. They usually tell you what is the problem and how to troubleshoot them. Another you can check is the batteries. . I recommend watching this video which will show you how to troubleshoot batteries:
czcams.com/video/4jeQ5sQQTtM/video.html&ab_channel=MobilityDirect
Thanks for stopping by our CZcams channel! Don't forget to subscribe for a chance to win a free mobility scooter.
I have a pride victory 10. When i key it up the blue light comes on. No beeps. But the battery gauge light doesn't come on at all. The matching works I just don't know how much batt power I'm using. Any help please?
If the blue light is flashing, it should be a flash code. You can refer to the user manual!
Great Video!! However, I have an older (gray tires) Pride GoGo Elite Traveller PLUS model and it just suddenly stopped running after driving it 6 miles the previous day. As you may know it does not have a flashing light or beep codes to diagnose with......the batteries are fine and when turned on the gage shows full charge and hardly used any power on my 6 mile trip previously.......Any ideas? Thanks!!
Check the connections in the battery case, or check the battery to see if its going bad, we have videos for each in our repair playlist.
@@MobilityDirect Thanks!! I took a look under the dash panel and found that someone else had been in there previously and a wire had come loose. Back up and running now!
@@richardbarkley9909 That's awesome! I'm glad you were able to figure it out. Most of the time. It's a loose connection on one of the battery terminals. Make sure you have the batteries velcro down to the case by putting some Velcro on the bottom of the battery and having it stick to Velcro. That's at the bottom of the case that will keep it from shaking around.
Thank u
Thanks for watching our video and commenting. Don't forget to subscribe for a chance to win a free mobility scooter.
I also asked him about the lights and he said it was probably a bad light but he doesn't replace those and doesn't carry them at the store. He said it won't affect the scooter performance. Is that true?
You probably just need a new battery meter. We have them available on our website with the following link: www.mobilityscootersdirect.com/pride-mobility/pride-go-go-victory-battery-meter-assembly.html
Hey! So we have one as well & I can’t seem to figure out our problem. We get 2 beeps when the scooter is on & obviously that means low charge in the batteries. The batteries are brand new & we even left the charger in for the night but no success. Could it be a problem with the batteries? A fuse? Any advice is appreciated thank you!
I’m also not getting a green light on the charging box like I should be
Thanks for stopping by our CZcams channel. When you first get your new batteries, make sure that your batteries are charged overnight or at least 6-8 hours to get them out of that "dormant" stage they are in. When batteries sit in the warehouse for several months without being used, you typically need to give them a lengthy charge to get them to have that maximum travel range capacity that you're expecting.
If you are charging the batteries off board and it doesn't hold a charge, then your batteries are toast and you'll need to get a new one. However, you can also get a technician to fully diagnose the problem. If the batteries are charging and the scooter is not turning on, it's probably a good idea to check the fuse as well.
Here are some helpful links to give you ideas on what to check on your scooter:
czcams.com/video/dHmCC99lWpY/video.html&ab_channel=MobilityDirect
www.mobilityscootersdirect.com/forum/knowledge-base/how-to-fix-mobility-scooter-batteries/
www.mobilityscootersdirect.com/forum/knowledge-base/how-do-you-properly-maintain-your-batteries/
If you got the scooter or batteries from us, you can also give our non-commissioned product experts a call at (888) 263-5601.
What if you get a no beep. It does a trickle charge. Key in on position shows no battery power but horn works and blue indicator light is on. Battery show 12.7v all the way through the lines but won't move. Checked fuses and all are good. Just will not power up completely.
Thanks for watching. It's best to check your batteries next. I recommend watching this video which will show you how to troubleshoot batteries:
czcams.com/video/4jeQ5sQQTtM/video.html&ab_channel=MobilityDirect
I had a repair service call and he replaced the battery and said that was all it needed. It will drive but the lights on top that shows that it is charged fully still doesn't come on. I am afraid to go to far because I don't want to break down. What do I do?
You probably just need a new battery meter. We have them available on our website with the following link: www.mobilityscootersdirect.com/pride-mobility/pride-go-go-victory-battery-meter-assembly.html
I am getting five beep error when driving over a metal threshold or sometimes exiting an elevator over the metal edges on the floor or using a metal ramp on a bus. Is that crazy? What could cause this? And how to fix?
You might have a fault brake lever. It might be the lever getting loose or the sensor for the brake system.
@@MobilityDirect It turned out that there is a cable under the carriage that was broken leaving two loose wires with exposed ends dragging along the ground. Whenever I crossed a metal threshold or ramp they would connect and cause the scooter to stop and beep. Two different mechanics failed to find this somehow. One sold me a battery and replaced a fuse after two weeks in the shop. The second one wanted to replace the solenoid.
My husband just got his scooter two days ago so he’s still learning it, but he’s trying to figure out if the two triangle shapes on there are for turn signals, and if so how do he use it?
This model doesn't have a turn signal. What you're seeing is the battery meter's design. Thanks for watching our video and commenting! We appreciate the support.
@@MobilityDirect this not the model he has, but I was just wondering if they do have turn signals, and if so how do you use it?
Hi my scooter is doing 5 beeps but have checked that it's not in neutral. What can I do?
Could be a bad controller. Make sure to subscribe to our channel for a chance to win a free Pride Mobility Scooter.
Ok i know this video was a year ago but im having issues. Mine was given to me so no manual. So i put new batteries in my scooter. It was working great for a week and now its acting up. It stops and starts. It does this and beeps 9 times and then all the lights go to red when its been charged. Ive cleaned it out with a can of air. No blown fuses. Im at a loss because i can barely walk. I need my scooter working. Any ideas?
Thanks for watching our video and commenting. This is a possible controller trip. You may also be trying to install the battery with the key inserted. Alternatively, the motor controller may be in overheat protective mode. You can either try reinserting the key into the key switch. Or try shutting down your scooter for 10 minutes. This will allow the controller to cool. If this doesn't work, you'll probably need a technician.
Mom's scooter doesn't beep any errors. I've checked the voltage throughout including the potentiometer, but it's losing power too quickly with brand new batteries. It used to last 4 Xs longer!
It's a good idea to do a load test with the batteries as well. I recommend watching this video which will show you how to troubleshoot batteries:
czcams.com/video/4jeQ5sQQTtM/video.html&ab_channel=MobilityDirect
Thanks for watching our video and commenting! We appreciate the support.
We're can you buy spares for this go go elite traveller
Hi Sandra! Please give our parts department a call at (877) 321-3241
After battery is fully charged, scooter will go quite a ways… as soon as the meter drops to the first yellow line, i get the 2 beeps for battery low. We own 3 scooters and only one won’t run the battery all the way down. Bad battery?
Thanks for stopping by our CZcams channel. I recommend watching this video which will show you how to troubleshoot batteries:
czcams.com/video/4jeQ5sQQTtM/video.html&ab_channel=MobilityDirect
Looking for partscfor go go elite traveller scooter S44E need new controller that starts the mobile scooter with the controls on the top needs to be replaced been damage ,,
Please give our parts department a call at (877) 321-3241. Thanks for watching our video and commenting. If you haven't subscribed yet, don't forget to hit that subscribe button to get a chance to win a free mobility scooter.
I but mine in drive mode and it still gives 5 beeps and wont go as if a break is still activated. Any ideas?
The five-beep code is primarily a brake code, so if you're sure the freewheel lever is in drive, you might benefit from a tech looking at it
@@MobilityDirect thanks. Yes it's in drive. Throttle works and you can hear it trying to go when pressed but brake wont disengage.
I am getting 5 beeps on the go go ultra x. Then getting 6 beeps. I have the 5 beep figured out thanks to your video How can I fix the throttle? Scooter goes 1 foot rhen atops then will go another foit and stop. Ugh
Thanks for watching our video and commenting. Try releasing the throttle control lever completely and reinsert the key to your scooterr. If that did not work, we do have a tear-down guide that can help you make sure that the throttle is at center position which is also a fix to the beep code that you're getting. If you're unsure, we recommend getting a technician to check it out for you instead.
czcams.com/video/fsjmI9gKvKk/video.html&ab_channel=MobilityDirect
Here's a copy of the Go Go Ultra X manual for a quick reference to the beep codes:
www.mobilityscootersdirect.com/pdf/Pride_Go-Go_Ultra_X_s49_05-31-2023.pdf
I'm getting 9 beeps when I throttle but sometimes it works when I start over by tuning off and on. Nobody to service in my area. Any ideas?
Can I change a part underneath the 9-beep floorboard? Maybe change the controller?
Which make and model scooter do you have?
@@MobilityDirect It's a go go traveler plus. Ordered the controller from MSP and will let you know how it turns out when I replace it in the next couple months. It works when I first turn it on but apparently it thinks it's overheating after a couple minutes so $125 is not bad for the controller if it works.
What does an ongoing beep mean? When i turn the key it starts an ongoing beep starts.
You might want to make sure that the neutral levers are switched before inserting the key and trying to turn it back on. If that doesn't work, your manual may have a different beep code guide for it. Thanks for watching our video and commenting. Don't forget to subscribe for a chance to win a free mobility scooter.
Did you find out what was wrong. We have the same happening.
My scooter is giving me Seven beeps it will start and go then stop and then won't turn on any more what should I do
What is the make and model? Have you checked for the user manual beep code reference sheet?
my scooter is charged but it keeps stopping then beeping?? its like every 5 minutes!! driving me crazy and im getting stressed ive tried turning it in and off taking key out pressing reset taking battery pack out and putting it back! please could you help?
Start taking it apart, check all the connections, you might have a connector that is loose. When was the last time you changed batteries?
Thanks , I'm getting the 5 beep error. It think it is in the brake contact cause the gear is engaged. Thank you very much.
It could be the sensor going bad for the brake lever.
Mine does a 5 beep and I switch the brake lever but nothing still happens. What else can I do?
You may need to replace the brake lever sensor.
Please if someone can help. Turn key to on, two constant beeps. Blue light on panel is illuminated. On the charger, red light flashing. Scooter is in drive position. Will not charge, bought two brand new batteries, still getting the two repeating beeps. Please is someone can tell me.
It's best to have it checked by a technician. If you just purchased it, you can try reaching out to your dealer. Beep codes usually can be found on the manual so you can easily diagnose the problem. If that didn't work and you also made sure that your batteries are tested, then it's a good idea to reach out to a technician.
Any tips on why the horn does not work?
Could be many different things, if other troubleshooting doesn't work, you might have to get ahold of a tech!
G thanksG thanks
One of my wheels wont move at all even when the scooter is in neutral, one wheel spins the other is locked stiff, also the scooter also beeps 5 times even when the scooter brake is locked and isnt in neutral
I would suggest calling the dealer/place you bought it from, might need a fix or two.
my scotter has 5 beeps did what the manuel said cant stop the beeps and wont run
Did you try putting the yellow lever in the drive position?
My scooter is not going foreward its beeping 5 times, I did what the manual said to do and it will not get in gear.
Try to remove the key first and push the manual freewheel lever to the drive position before restarting your scooter. If that didn't work, you might want to check with the dealer where you got the scooter from for assistance. Thanks for watching our video and commenting. We appreciate the support.
What if you just got a brand new battery pack and the scooter isn't holding a charge?
It's best to start with the new battery packs. Making sure they are charged properly the first time and checked. After that, while it depends on each scooter, making sure you check the connection of the battery to the scooter is also one thing you can check. Some batteries uses cables to properly attach them to the scooter while some just needs to be inserted in the battery case. If you still encounter issues after all these and you've made sure that the batteries are good after testing them, then it's best to get your mobility scooter checked.
My diagnostic ticket light stays on and battery drains quick even though had new batteeries
Not ticket
What kind of batteries did you use? Are they sealed lead acid gel? If you went to Walmart and bought batteries that are made for lawn mowers those will not work.
No I bought decent batteries off a scooter engineer
My Pride Victory 9 doesn’t change the lights never move, it’s always green no matter how far I go
The battery meter is probably bad, as you drive it for miles, the battery meter lights should turn off one at a time.
My mom's scooter beeps 9 times, isn't in neutral, we changed brand new batteries yesterday and still beeping, not moving at all. HELP! IS A pride gogo sport
It's time for a technician.
My batteries have power but no beeps or lights come on. Pride victory 10
Trace the power to the controller. Do you have a voltage meter? You should be getting 24 volts at the black and red connectors that connects to the controller.
9 beeps after I road it than charged 😢 now I get 9 beeps, I checked everything and oh boy😢
If the manual doesn't help you resolve the issue as it usually does, then it's time to get it checked. Thanks for watching our video and commenting! We appreciate the support.
My blue power light flashes. No beeps wth
That should be a flash code, count the number of flashes and refer to your user manual!
my scooter been charged for 2days and it didn't even charge and it's on yellow
How long have you had the batteries? It might be time for a replacement!
Victory 9 full battery no beeps not moving and it's in drive
Is the blue light on the battery meter flashing when you turn it on?
@@MobilityDirect and yes blue light and full charge lights lit did it before sat a few days then went
How many times does the blue light on the battery meter flash?
@@MobilityDirect 9 times
That's a undefined error code, you need to take it to a technician. Check page 37: www.mobilityscootersdirect.com/pdf/pride-mobility-victory-9-user-manual.pdf
My scooter will move when charger is plugged in unplug charger nothing
You'll probably need to have your batteries checked. The video below might help:
czcams.com/video/4jeQ5sQQTtM/video.html
Thanks for watching our video and leaving a comment! Don't forget to subscribe for a chance to win a free mobility scooter.
Beeping. When I hit bumps??
Its most likely a loose connection somewhere, I would check out our breakdown videos to learn how to take apart your scooter and check for any loose connections.
@@MobilityDirect thank you
My daughter’s scooter will not charge and it is new.
Thanks for stopping by our CZcams channel. I recommend watching this video which will show you how to troubleshoot batteries:
czcams.com/video/4jeQ5sQQTtM/video.html&ab_channel=MobilityDirect
Surprise Ryobi it's just like the blue when he was working on the same time
Thanks for your comment, hopefully this video was helpful for you.
It won't even light up
Start by checking the batteries, then the connections from the battery to the controller. You need to use a multi meter. Check out our repair playlist. We have tons of repair guides. czcams.com/play/PLok6xyAR_1MauXutYV4eVK7tz4flXaUYu.html
My victory the throttle is stuck on low
I got 5 beeps
You can refer to the manual for the beep code but it's possible that the freewheel lever may be in the freewheel position. To remedy this situation follow the instructions below:
1. Remove the Key.
2. Push the manual freewheel lever to the drive position.
3. Restart your scooter.
Thanks for watching. We appreciate the support.