SeaDoo GSX vts relay install

Sdílet
Vložit
  • čas přidán 26. 08. 2024
  • This shows my trials and tribulations to get the famed DEI 451M relay installed in my GSX. But first, some troubleshooting, to see if I isolated the problem correctly. Then it goes for a ride to see if it works like it’s supposed to.
    Let me know in the comments what you would’ve done different.

Komentáře • 10

  • @jarrodzimmermann3567
    @jarrodzimmermann3567 Před 2 měsíci

    So essentially you kept the purple going to the module and spliced in the red and purple from the relay to the purple, the white and brown from the relay spliced to the black on the harnes and the then the small lead to the vts switch?

  • @dhern2613
    @dhern2613 Před 4 měsíci

    Great video.
    Better that you did show how to fully diagnose it properly by ruling out all other possibilities

  • @colinbourque1097
    @colinbourque1097 Před 2 měsíci

    my vts works fine went through all the tests but when u trim all the way up it locks itself up making unable to go down, the motor isn’t binding in any way it just stops sending power when u want to trim down but sends power to send it up when it’s already up….my question is there’s no other way to fix this problem besides the additional module or replacing the hole thing?

  • @floop93
    @floop93 Před rokem

    lack of connection between wires inside (from DC motor) to connector is normal. Inside case are 2 relays, few transistors and bunch of reed switches and resistors. It doesn't indicate that the VTS electronics is faulty.
    The reed switches are used as position sensor but two of them are also a limit switches. When You bypass them instaling 451M tension in case of holding button too long can damage the worm gear. Thats why i recomnd to repair original electronics.

  • @eugeniovila5194
    @eugeniovila5194 Před rokem

    Can u post the color wiring legend?

  • @cindyhersey6768
    @cindyhersey6768 Před rokem

    How’s the seat working

    • @xylol412
      @xylol412  Před rokem

      The seat is so much more comfortable. In hindsight, I would’ve used the foam off of another SeaDoo, to get more of a lip behind the driver.

  • @The9TK
    @The9TK Před rokem

    link to where you bought the relay

    • @xylol412
      @xylol412  Před rokem

      www.ebay.com/itm/162598108737?epid=8017866492&hash=item25db9a3e41:g:YD4AAOSwtkVZcFzx&amdata=enc%3AAQAIAAAA0IeyoWNGN2gIZAtyzna0acMYuGt%2BIqIEDU1vDoVrQUhAb1%2BntcAPwiFsOGZpwHNe9MKgiG0EDQrLJ7iikCLt1Eei6pA5WPPlhJn9y17Mq9uLe9vECZKIJGrn7gRUlFX%2FAk6KZgFc%2FUNfkRU0ePOvueivoe9niiECiXXTiOJz6xJWewjluokLP0tKZiaj2tKHCLRwnEccCAara0fdYPQSXpWm8%2B8SvoozdwRqONLlz5pplOxqjUNXFBB%2Fk3Qqh3sz52l7Hyyv0pNDN9oE7k4zRdY%3D%7Ctkp%3ABFBM2qSp9Zhi