Volkswagen Polo 9n3 | Xenon HID Headlight projector Upgrade installation DIY
Vložit
- čas přidán 11. 07. 2024
- VW Polo 9n3, year 2005, 2006, 2007, 2008, 2009, how to build bi-xenon projector (HID) in your Volkswagen.
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
There is a version with a bi-xenon projector and one with a Bi-LED projector;
retrofitlab.com/collections/v...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:00 Put the headlight into the carton box for about 18 minutes and separate the glass of the housing by using a flat screwdriver and permaseal tools
1:03 Remove the halogen bulb holder
1:25 Put the rubber ring on the tail of the Mini H1 bi-xenon projector and screw the Mini Gatlin Gun shroud on the projector
2:05 Put the bi-xenon wires through the reflector and screw the nut on the tail after you place the H7 centric ring
2:26 Here we connect the bi-xenon wires to the high light. Now we do have new H1 splitters available what make this installation easier
3:05 Connect the bi-xenon plug of the projector to the halogen high light by our splitters (sorry for the fog in the video)
3:15 We drilled a hole (22mm) in the rubber cap for the wires
3:56 Here we put the butyl in the headlight. Don't forget to clean all parts inside before you close the headlight
4:17 Place the headlight in the carton box again for about 14 minutes. After that's done, press the glass into the housing
4:53 Screw the bulb holder back on the tail of the projector and put in the bulb
5:04 Connect the two plug in the original H7 plug
5:16 Final view
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• VW Polo 9n3 (2005 - 2009)
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retrofitlab/
Instagram: / retrofitlab.com_official
Our website: www.retrofitlab.com/
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#Volkswagen #Polo9N3 #VwPolo #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement - Auta a dopravní prostředky
pd: very nice job!!! thanks and regards!
Nice vid
Good job
Thanks!!
Hi plz can you tell me what is the name of the standard lights in the polo 9n3 are they H7 ^^?
Parabéns
Where would I get that cutting blade at? The one used when opening the light? Been looking for something like that
Where do I go to order a retrofit job on my headlights ? Where can I see the pricing
as it is called the plastic used for splicing cables "in the 2:32 minute video" ???
Ciao, dove posso comprare i lenticolari della Vw Polo 9n3? grazie
Hi i need make it in my car Polo 2007 BR What is the brand of the projector i use to h7 light?
That black plastic dont look so good afterusing the screwdriver. Therer is no other way?
can you please do a nissan altima 2010 sedan
ciao sono un nuovo iscritto ti vorrei fare una domanda.per caso nei fari che hai modificato è entrato acqua?
wath name of wires to set up, low beam to hight? thanks
How Many Grades the Trimmer Have to Stay
How many degrees around the box.
Hello I have a Polo it has the Same Headlights how much would these Xenon Headlights cost to make and Possible give İt a Black Look
Hi, I have a GTI variant of this Polo. How bright are they in LUX? Have you measured it? I currently have Leds. Can I buy the projector housing only without the xenon bulbs and ballasts? I want to fit Leds in them if that is possible. Thanks. 😃
Thanks for your questions! :) Please send an email to info@retrofitlab.com so we can give you personal advice. :)
Is het misschien niet handig om eerst de oude 'permaseal' helemaal te verwijderen met wat schuurpapier ofzo ? afwerking ziet er niet zo mooi uit moet ik zeggen..
Maakt het nog uit welk merk lampen je hebt? Ik dacht te hebben gelezen dat het alleen kan met de Bosch lampen omdat hier de lijm goed van los te krijgen is. Ik heb in mijn 9N3 Hella lampen zitten en hier schijn het niet mee te kunnen. Kunnen jullie daar meer over vertellen?
***** Heb je misschien iets van advies, of een handleiding, hoe ik dit het beste kan aanpakken? Ik zat al te kijken voor tweedehands Bosch koplampen, maar die zoektocht heeft nog niets opgeleverd helaas.
Hello! Nice job with the project.
Can you please tell me the dimension of the Bi-xenon projector. In my country it is available in 2 dimensions 2.5inch and 3.0inch. Thank you! keep it up!
Retrofitlab Thank YOU ! I am about to Open the lighthouse and buy the bi-xenon , very explicit video ! Best regards !
Hello I'm french , for my polo 9N3 , I would buy your kit on Your Site Add- Ons In > Wire harness > ? What should i choose ?
Okai thank's :D
Hi, do you still have these available on your website??
Hi, we have upgrade kit only for halogen headlight (original current headlight), if your headlight is Halogen, you can visit this link retrofitlab.com/collections/volkswagen-polo-9n
Why didn't you use a bigger shroud, the projector feels lost in the reflector
okay then, good job anyway (y)
Do you have to remove the hole bumper to do this?
There is no need to remove the entire bumper, however, you will have to unscrew some bumper screws to make a little space for the headlight to come out. There are several video's online that will show you how this can be done.
Hi, how can the plastic cover be removed without a heat gun?
Without heat it's not an option. In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time.
Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
Retrofitlab.com hi thanks for the reply, how do I ensure that the projector is actually positioned the right way up so I don’t have an upside down or wonky beam pattern?
@@Zeebean384 When you have the projectors it will be quite easy. There is writing on them, the solenoid needs to be at the bottom and the mounting rings only fit one way.
Where are located i need this 😮
In The Netherlands, it's not an easy retrofit, but with some patience it is definitely doable :-) retrofitlab.com/collections/volkswagen-polo-9n
Can you make for renault clio 2?
=)))
anyway...now i'm waiting for a clio owner, to send his lights to Retrofitlab =)))
thanks ;) good work
Nice video man ! It's great job !
I have a question, may you do a retrofit for a peugeot 207 ? :) It's my car and i like see how do a retrofit for her.
It's french car, so i don't know if you do on that.
ps: i'm afraid but i'm sorry for my poor english. thanks for your reply :)
EDIT: i search on your website: www.retrofitlab.com/xenon-koplamp-database.html#PEUGEOT
But it's empty for my car, maybe you know the bulb for peugeot 207 ?
Thanks for your reply, and carry on your job, it's amazing !
***** Thanks for your reply. Do you know if i need something with that for my retrofit ? www.retrofitlab.com/en/xenon-projectors-1/mini-h1-bi-xenon-projectors-60-1.html
how can i contact you ? for professionnal Relationship ?
Eww
what size of projector?
Because of the small reflector and H7 base, a 2,5" projector