60 sided geodesic dome
Vložit
- čas přidán 25. 06. 2015
- Making a small 60-sided geodesic dome out of solid pieces of wood. Lots of miters! woodgears.ca/geodesic/
A 60-sided geodesic is derived by taking a 12-sided dodecahedron and turning each pentagon into a 5-sided pyramid. - Jak na to + styl
60 sided geodesic out of solid wood.
woodgears.ca/geodesic
جميل جدا عمل جديد
رووعة
Hello I'm Noah from Syria practical Hua shavings Wood Furniture Find Jobs Carpenter
I am a resident in Jordan you help me
Matthias Wandel
Mathias I'm a Big fan of you. I always watch your videos. I just want to point out that the Sawstop would only stop if you were touching the metal. I don't think you were so there wouldn't be a reason to swear.
ابو عبد الرحيم سعيد الوردي woodgears.ca/miter/index.html
Wizard. You're a wizard.
I'm a what?!
Rolling a d60 would make him the most powerful of wizards.
Your a wizard Harry.
+Supah X You're... 🤓 😏
Vere nice ضلع 😂😂😂
This is awesome. Replace some triangles with semi transparent ones and put a light bulb in it.
This is a great idea... even if you stick with all wood you could cut slits or holes or simply leave the bottom section out.
***** Yeah if it was a lamp, the gaps wouldn't be an issue, either, with light streaming out.
+johnnyq90 Yay! It's mini Jet-engine man!
Always a good day when Matthias posts a video
I can just imagine David Attenborough's voice at the end: "And here we have the rare footage of a native Matthias on a freshly laid egg..."
I messed around with geodetic domes backin the 60's and found that the angles have to be exact. When you said that the blade angle was close enough I new you were in trouble. You are the best. Thanks for the all the interesting and educational videos.
You are the most patient man on the internet. Great work, love watching your videos!
Dude, you do some of the coolest stuff. I learn engineering just by watching your videos - the use of tape on those glue ups to provide compression through use of tension was just awesome.
Another wonderful work of Mathias. Here in Brazil we are amazed. Congratulations!
That would make a great bird house !
I like this idea. May have to steal it!
syd ascott It would, but with all the work it takes to build one, you should charge the birds rent.
That's some fine looking geometry; oddly satisfying watching it all come together.
Matthias Wandel very impressed with your work. Being a high school student, this woodwork has really caught my attention... thanks again for being a reliable uploader.
peace!
I hate using labels, but genius comes to mind. Your math and engineering skills are amazing. Thanks.
man I needed this video like a month ago! I built a 1080 piece chair out of trapezoids fashioned to form equilateral triangles but I couldn't get the miters right to do my original design, props to you :D
Screwing on that capstone looked therapeutic.
The first sentence of this video tells you all you need to know about this guy. A TRUE genius.
I knew that there was a reason why I failed math at school. It's just so darned complicated. The table saw king strikes again! Well done Matthias.
haha. Nice pocket hole disclaimer.
Jay Bates I figured I'd preempt the inevitable comments! :)
Jay Bates was gonna call him on it too lol
I'd be a liar if I said I didn't gasp in shock when I saw it!
Matthias Wandel I actually laughed out loud at that disclaimer.
Mark Lindsay as did I! Plussed for that alone.
Also just used big print for the first time. It is incredible. Thanks Matthias.
I am fascinated by these types of work. Well done..
Great to see you make that thing, I've build a similar one at the art academy three years ago and still use it for storing small tools and some other special items :) Built my own laser cutter some time ago and now can cut thin veneers with it, so I make these shapes out of very thin wood which makes it easy because I don't have to use miters for the thickness :)
man you're legend!!! you always seem to solve the problem ive been scratching my head over for ages!! great work ;)
I have been a follower on my old account since I first created it in 2010 and I just want to say you are one of my favorite youtubers so keep making the videos thanks
Always fascinated by your work, Just think in 10 years I'll be watching your next video where you have figured out how to make each piece using dovetails
Awesome work! You mentioned about your dislike of tape as clamps. Here's a suggestion: Use the masking tape to line up the pieces (just like you did), then use a 1/2" thick rubber band that they use to hold broccoli stalks in a bundle. Secure the rubber band around the outside of the 5 piece pentagon. The pressure will be exerted inwards which will hold the pieces in place until the glue dries.However, this will only work for the pentagon pieces. Once you assemble the 12 pentagons into the sphere, use large rubber bands (cut from a car tire inner tube). The pressure will keep everything nice and tight but it will also allow last minute adjustments until the glue sets.Excellent video and excellent CZcams channel. I am now inspired to try to build my own.
I like how you always test your builds by sitting on them. It's kinda funny :D
Great project Matthias! Thanks so much for sharing with us!!! W
You are a huge nerd. I wish I had your talent. Well done.
Was that sound at the very end you jumping off, or the whole thing crushing under your weight? :P
*Very good job Matthias!!!*
The whole time I was watching, I was wondering if he was going to do the "stand on it" test. Matthias, you did not disappoint. Also, as a math teacher, polyhedra make me happy.
Awesome job, Matthias
With the amount of tolerance stackup involved with a process like this it's impressive that you only had a few small gaps.
This would be the start of an awesome series of lamps. Now I just need to figure out a jig to drill out most of the material from the center each triangle.thank you sir for keeping me busy for the next week.
You don't need to drill the centers out, silly - just make a skeleton frame using a length of wood for each edge..
Great idea and execution of that idea!
Half the time I don't understand what he is saying, I just like seeing the project being made precisely as one would imagine
That's crazzzzzzy! Cool but crazy, nice work.
You do come up with some very clever projects, well done...
Put a bunch of numbers on it to make it a D60
That was a nice surprise! I will instantly have to fetch my own old paper-polyhedrons. I made a icosahedron from wood almost 30 years ago, but that didn't turn out as well as your dodecahedron-based geodesic, because I had a very cheap table saw. Btw: I assume, that your old one at 0:05 has been made without the double cut you show at 2:15.
Nice. I can imagine those miters are very hard to get right - once I made a world map in the shape of dodecahedron and it required quite a long time to fine tune the cuts. But the result can only be beautiful.
Thanks for sharing this Matthias!
As you know Dodecahedron is one of the sacred geometries.
And you may also know that, if you were to build one big enough for you to sit inside comfortably, you will be *inside a sacred space*
but did you know that if you were to meditate inside this 'Sacred space' , something strange, something magical begins to happen!
I would be very impressed if you scaled it up to make a roof for a gazebo . This video is impressive by itself. You make it look easier than it is.
My wife buys metal gazebos from Target and the never survive the winter winds.
Love watching you work it a true pleasure.
Awesome Mr. Wandel, tnx for sharing!!!
With all the cuts it came out great. Just a little error can really add up. now you have a fancy cookie jar.
Great video, and amazing work.
I love when you show that you really trust your work byt just jumping/sitting/standing on your products
You can really say that you trust your math and geometry! ahah
I remember building these complex shapes in middle school for tech drawing, and just cutting and creasing the paper then glue it was a real mess on most of the complex shapes
You are an amazing individual. Love your work and commentary. You do a lot of angles. I am now thinking is your name is Math W. Angle.
Very cool! Looks like my summer project list just got bigger!
EL CHAPPY TAN If I attempted this, it would be all my summer project list would consist of!
That is excellent. And I'm really surprised that it's so robust to the point that you could actually stand on it too.
Mathias, Merry Christmas to you and your family . This video inspired me to make three way speakers, 3 domes on a base. I used a ring with sand paper on the inside to sand and shape the domes round. These are floor standing speakers using JBL studio master components and crossovers . I'm planning a set of dome speakers made out of limestone, they will look like snowmen. I wanted to thank you for all you expertise and videos , especially this one. My wife extended you this complement:
"His ,(meaning you , as I watch your videos), skill and craftsmanship makes you,( you is me her husband), look like an idiot".
It's true. Still I love her after all these years. Thanks again.
Always enjoy your videoes Thanks
Spectacular. Very good your project
New saw?
Awesome! I like the pocket holes! lol! I love those stereometric wood projects!
This project is like watching the cliff divers in Mexico. Fascinating but I would never, ever try it myself.
Well done. I couldn't do that. Really impressive
Just, so enjoyable to watch.
Excellent!
Master woodworker caught trying to hatch geodesic wooden egg... film at eleven.
LOL. Love your videos. You're inspiring to watch.
I always like your work and your working style.its very nice and very professional and also its very helpful for those peoples who want to do something different and according to the natural requirements. Thank you sir Mushtaq mughal
Very cool!
Awesome, mate!
Nice job and thanks for the lesson. Maybe I will try it one day.
I like the stress test on an object which shouldn't really be under any load.
Buckminster Fuller would be proud.
I only knew that name through Marc Maron's podcast, although he pronounces "B" differently ;)
Thanks to your comment I can now put a thing to the name, so, thanks for that!
Fuller once announced that he could cover New York City with a dome, for the cost of snow removal for ten years. He said the year round temp would be in the 70s F, so no heating or cooling costs for the residents. He was still on campus when I attended SIU-C, but I never thought to go meet him.
Well I'm amazed. Great work.
The mathematical shapes are one of the things I would love to make in the shop, but the angles worry me. I will attempt again when I have a hole in projects. Awesome work Matthias!
Now we know where Fred Flintstone got his bowling ball.
This will be a great project for my grandson and me. Maybe a geodesic dome model...
Mr. Matthias Wandel Very Smart.
I salute with you Mr. Wandel.
With all those repetitive cuts, the first thing I thought about was safety. People can often nick their hands on the blade with repetitive cuts.
If you wanted to hide those screws in the lid.
Drilled pockets in the lid and the base and glued in magnets, just be sure to orient the magnet poles for attraction.
You sir, are a genius.
I really like your videos.
As a woodturner I say that it is a very interesting idea... But I'm not there yet. Good work Matthias. Marc
Parabéns. Só do Brasil e gostei muito do seu trabalho.
.haces muy buenos trabajos,eres un genio.
saludos México.
Wow ... that must have taken forever to put that together.
Next you need to write numbers on each face and use it playing D+D....
Yeah, never mind that.
I agree about your comments about the miters! I think I might go bonkers with all those miters.
in highschool i slept this man made a really complicated shape
So awesome!
wow that is too cool. That must take a lot of patience to make all those pieces without knowing if it will fit perfectly
I'm gonna start wood working now because of this. I could build my own furniture!
Great video! Thank you!
Cool video!!!
I want to see the cat carrier, that would be very cool!
Great stuff Matthias Wandel !!! realy Inspiring :)
I love your weird testing methods... lets jump on it! Or stand on it! Brilliant!
I don't know what to say, other than; this is really cool! Nice vid, and cool project
Cool and all. My only question is why build one? Is it a model or just for fun or something else?
I've got that same plane at home, love it ;)
Pretty cool! Now you need to make a tape dispenser! lol
How long from start to finish did it take you to make this? I love how I can watch it be done in all of 8 minutes. Keep up the good work!!
Very cool. Perhaps buckysphere instructions/plans will be the next spheroid vid?
Very interesting. That would be interesting to make on from various types of wood and then turned round on a lathe
Recalling my one attempt at compound cuts for fitting molding corners I am sitting here with my jaw on the floor in awe.
very nice job sir
With so many repetitive cuts, it's easy to let your guard down. Glad you didn't cut into a finger!
Bucky Fuller would be so proud.
Nice job. I would suggest you try a silicon caulk to adhere and to fill the cracks. You may also benefit from building the pieces around an inflated balloon that you could pop when completed (or if you glued the outside of the balloon it could remain as a smooth inner coating of your dome).